LG Electronics BX220-JD manuale d’uso

BX220-JD OWNER’S MANUAL LG DLP PROJECTOR LG DLP PROJECTOR Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the bottom of the set and quote this information to your dealer when you require service. Model number : Serial number :[...]

DLP PROJECTOR DLP PROJECTOR FCC NOTICE • A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environmen[...]

Contents 3 Contents Introduction Safety Instructions ..........................................4-6 Names of parts Main Body .......................................................7 Connecting Part ..............................................7 Control Panel ..................................................8 Remote Control ........................[...]

Safety Instructions 4 Safety Instructions Please take note of the safety instructions to prevent any potential accident or misuse of the projector . ➟ Safety Instructions are given in two forms as detailed below . W ARNING : The violation of this instruction may cause serious injuries and even death. NOTES : The violation of this instruction may [...]

Safety Instructions 5 ENGLISH Using W ARNING Do not place anything containing liquid on top of the projector such as flowerpot, cup, cosmetics or candle. This may cause a fire hazard ! In case of impact shock or dam- age to the projector switch it off and unplug it from the mains out- let and contact your service cen- ter . This may cause a fire or[...]

Safety Instructions 6 Using NOTES Do not place heavy objects on top of projector . This may cause mechanical failure or personal injury! T ake care not to cause impact to the lens particularly when moving the projector . Do not touch the lens of the pro- jector . It is delicate and easily damaged. Others NOTES Be sure to unplug if the projector is [...]

Names of parts 7 ENGLISH Names of parts Main Body Connecting Part A U T O S O U R C E P O W E R V O L V O L M E N U O K Indicators Front remote control sensor Power button Foot adjusting button Foot adjusting button Rear remote control sensor Control panel * The projector is manufactured using high-precision technology . Y ou may , however , see on[...]

Names of parts 8 Control Panel AUTO SOURCE POWER MENU KEYSTONE KEYSTONE OK POWER Button / , KEYSTONE+/- Button MENU Button Selects or closes menus. AUTO Button / Button Adjusts functions of menus. SOURCE Button Switches to RGB, DVI, Video,S-Video mode. A OK Button Checks present mode and saves the change of functions.[...]

Names of parts 9 ENGLISH Remote Control Installing Batteries • Open the battery compartment cover on the back of the remote control and insert the batteries with correct polarity , match “ + ” with “ + ” , and match “ - ” with “ - ” . • Install two 1.5V “ AAA ” batteries. Don ’ t mix used batteries with new batteries. POWE[...]

Names of parts 10 * Lamp Indicator , operation indicator and temperature indicator at the top of the projector show the user the operating status of the projector . A U T O S OU R C E P O W E R V OL V O L M E N U O K Lamp Indicator T emperature Indicator Operation Indicator Projector Status Indicators Operation Indicator Lamp Indicator T emperature[...]

Names of parts 11 ENGLISH Accessories Optional Extras POWER MENU SOURCE AUTO BLANK ARC STILL OK KEYSTONE KEYSTONE LASER * Contact your dealer to purchase these items. * When applying a ceiling installer , use only the ceiling installer for projector . * Contact your service personnel for replacing a new lamp. * Projector lamp is reaching the end of[...]

Installing and Composition 12 Installation and Composition Provide proper ventilation for this projector . ● The projector is equipped with ventilation holes(intake) on the bottom and ventilation holes(exhaust) on the front. do not block or place anything near these holes, or internal heat build-up may occur , causing picture degradation or damag[...]

Installing and Composition 13 ENGLISH 1. Place the projector on a sturdy and horizontal surface with the PC or A V source. 2. Place the projector the correct distance from the screen. The distance between the projector and the screen determines the actual size of the image. 3. Position the projector so that the lens is set at a right angle to the s[...]

Installing and Composition 14 ● The projector has a ‘ Kensington ’ Security System Connector on the back panel. Connect the ‘ Kensington ’ Security system cable as below . ● For the detailed installation and use of the Kensington Security System, refer to the user ’ s guide attached to the Kensington Security System set. And for furth[...]

Installing and Composition 15 ENGLISH * Don ’ t unplug the power cord while the ventilation fan (inlet/outlet) is working. If so, you take longer time by lamp on. T urning on the Projector T urning off the Projector 1. Connect power cord correctly . 2. Remove the lens cover of the projector . 3. Press the POWER button on the remote control or top[...]

Installing and Composition 16 1. While pressing the foot adjuster button, raise or lower the projector to place the screen image in the proper position. 2. Release the button to lock the foot in its new position. 3. T o fine-tune the height of the projector , rotate the front foot to raise or lower it. After raising the front foot, do not press dow[...]

Connection 17 ENGLISH Connection Connecting to a Desktop PC * Y ou can connect the projector to a computer of VGA, SVGA, XGA and SXGA output. * Y ou can use ARC function for the RGB signals of the Aspect Ration 4:3. (For HD wide input signals, you cannot use ARC function .) * Fundamentally , HD wide input signal is not included in the Spec, so the [...]

Connection 18 Connecting to a Video Source < How to connect 1 > a. Connect the Video input jacks of the projector to the output jacks of the A/V source with Video cable. < How to connect 2 > b. Connect the S-Video input jack of the projector to the S-Video output jack of an A/V source with an S-Video cable. * Y ou can get better picture[...]

Function 19 ENGLISH Function V ideo Menu Options * In this manual, the OSD(On Screen Display) may be different from your Projector ’ s because it is just example to help with the Projector operation. * If there is no input signal present, the Menu will not be displayed on the screen. * This operating guide explains operation of RGB(PC) mode mainl[...]

Function 20 1. Press the MENU button and then use F , G button to select the menu. 2. Press the OK ( A ) button and then use D , E button to select AC C item. 3. Press the F , G button to make appropriate adjustments. Auto Color T emperature Control ● Each press of the F , G button changes the screen as shown below . ● T o exit the menu display[...]

Function 21 ENGLISH Special Menu Options MENU prev. move FG select Language ARC Flip Horizontal Flip Vertical Set ID FG 1. Press the MENU button and then use F , G button to select the menu. 2. Press the OK ( A ) button and then use D , E button to select Language item. 3. Press the F , G button to select the language you want to use. ● On-Screen[...]

Function 22 Special Menu Options MENU prev. move FG select Keystone 0 Auto Source Blank Image Lamp Mode Lamp Time 0 Hr FG 1. Press the MENU button and then use F , G button to select the menu. 2. Press the OK ( A ) button and then use D , E button to select Auto Source item. 3. Press the F , G button t o select On or Off . ● T o exit the menu dis[...]

Function 23 ENGLISH 1. Press the BLANK button. ● The screen turns off to a background color . ● Y ou can choose the background color. (Refer to ‘ Selecting blank image color ’ ) 2. Press any button to cancel the blank function. Using Blank function * This function may be ef fective if you need to get attention of the audience during present[...]

Function 24 MENU prev. move FG adjust Keystone 0 Auto Source Blank Image Lamp Mode Lamp Time 0 Hr FG 1. Press the MENU button and then use F , G button to select the menu. ● The used lamp time is displayed. ● When projector lamp is reaching the end of its life (over 2000 hours), the lamp indicator will be turned red. ● The lamp warning LED il[...]

Function 25 ENGLISH 1. Press the MENU button and then use F , G button to select the menu. 2. Press the OK ( A ) button and then use D , E button to select Horizontal or V ertical item. 3. Press the F , G button t o adjust the screen condition as you want. ● Horizontal , V ertical are adjusted from -50 to +50. ● Based on the input mode, the adj[...]

RS-232C 26 External Control Device Setup SET ID How to connect external control equipment * Connect the RS-232C input jack to an external control device (such as a computer or a video control system) and control the Projector ’ s functions externally . MENU prev. move FG select Language ARC Flip Horizontal Flip V ertical Set ID FG 1. Press the ME[...]

RS-232C 27 ENGLISH Command Reference List 1. T ransmission * [Command 1] : First command to control the set.(k, j, x, ASCII code, 1 Character) * [Command 2] : Second command to control the set..(ASCII code, 1 Character) * [Set ID] : Y ou can adjust the set ID to choose desired projector ID number in special menu. See previous page. Adjustment range[...]

RS-232C 28 External control device setup 05. Contrast (Command2:g) ➜ T o adjust screen contrast. T ransmission Data Min : 0 ~ Max : 64 * Refer to ‘ Real data mapping 1 ’ . Data Min : 0 ~ Max : 64 [k] [g] [ ] [Set ID] [ ] [Data] [Cr] [g] [ ] [Set ID] [ ] [OK] [Data] [x] Ack 01. Power (Command2:a) ➜ T o control Power On/Off of the Projector .[...]

RS-232C 29 ENGLISH 07. Color (Command2:i) ➜ T o adjust the screen color . T ransmission Data Min : 0 ~ Max : 64 * Refer to ‘ Real data mapping 1 ’ . Data Min : 0 ~ Max : 64 [k] [ i ] [ ] [Set ID] [ ] [Data] [Cr] [ i ] [ ] [Set ID] [ ] [OK] [Data] [x] Ack 08. Tint (Command2:j) ➜ T o adjust the screen tint. T ransmission Data Red : 0 ~ Green [...]

RS-232C 30 13. Re d ADC gain Adjustment (Color R) (Command2:w) ➜ Adjust the Red gain of ADC part.(RGB) T ransmission Data Min : 0 ~ Max : 64 * Refer to ‘ Real data mapping 1 ’ . Data Min : 0 ~ Max : 64 [ j ] [w] [ ] [Set ID] [ ] [Data] [Cr] [w] [ ] [Set ID] [ ] [OK] [Data] [x] Ack 14. Green ADC gain Adjustment (Color G) (Command2:y) ➜ Adjus[...]

Information 31 ENGLISH Supported Monitor Display Component-*1 RGB(DTV)-*2 Signal <DVD/DTV Input> * Cable type 1- RCA to D-Sub Adaptor 2- Computer Cable NTSC(60Hz) 480i 480p 720p 1080i P AL(50Hz) 576i 576p 1080i O O O O O O O X O O O X O O Sources Format V ertical Freq.(Hz) Horizontal Freq. (kHz) VGAEGA 640X350 70.090Hz 31.468kHz 640X350 85.08[...]

Information 32 Maintenance Cleaning the lens Clean the lens whenever you notice dirt or dust on the surface of it. W ipe the lens surface gently with an air spray or a soft, dry lint-free cloth. T o remove dirt or stains on the lens, moisten a soft cloth with water and a neutral detergent and wipe the lens surface gently . Cleaning the Projector Ca[...]

Information 33 Memo[...]

Information 34 Memo[...]

Information 35 Specifications Operating Condition Projector Lamp MODEL resolution horizontal / vertical ratio DLP panel size screen size remote control distance zoom ratio Video compatibility Power height(mm/inches) breadth(mm/inches) length(mm/inches) 1024(Horizontal) x 768(V ertical)pixel 4:3(horizontal:vertical) 0.55 inches 1.01~5.08m(40~200 inc[...]

BX220-JD OWNER’S MANUAL LG DLP PROJECTOR LG DLP PROJECTOR Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the bottom of the set and quote this information to your dealer when you require service. Model number : Serial number :[...]