Krown Manufacturing KBS300RX manuale d’uso

INSTR UCTION MANU AL KA300TX / KA300RX / KBS300RX Alar m Monitor KA300TX / KA300RX / KBS300RX Alar m Monitor PA TENT PENDING[...]

Important W arranty Compu-TTY , Inc. warrants that the Alarm Monitor sold by Compu-TTY , Inc. is free from defects in materials and workmanship under normal use and service for one year . This warranty is applicable only to the original purchaser of the Alarm Monitor when accom- panied by a sale receipt stating the date of purchase and the name of [...]

CONTENTS i. Introduction ......................................................................................ii ii. KA300 System...................................................................................1 1. How your Alarm Monitor KA300 W orks ......................................2 Using KA300 for a Single Family Household ..............[...]

i. INTRODUCTION The alarm Monitor KA300 is developed to bridge the gap created by the existing warning devices designed only for the hearing. It provides a totally reliable source for the Deaf and Hard of Hearing to watch and to be alerted when there is a fire, smoke, propane, gas leak alarm, tornado, hurricane, severe thunder storm alert, or when [...]

ii. KA300 SYSTEM KA300RX receiver KBS300RX with bed shaker KA300TX KW A300TX STROBE ADAPTER INDICA TOR BA TTERY LOW INDICA TOR LOUDSPEAKER MODE SELECTOR CHANNEL LEDS PROGRAM OP/LOW BA TTERY RESET SHAKER OPERT A TION OP .CODE/CHANNEL COVER TEST BUTTON ON/OFF SWITCH OPERT A TION-CODE CHANNEL COVER[...]

ALARM MONIT OR KA300 WORKS KA300system is designed to monitor all existing acoustic alarm units in your living area and transfer it to a visual and vibration alarm. It will quickly help you to determine what source triggered the alarm and give you enough time to evacuate from the building or to locate a shelter . The KA300 is not an alarm system bu[...]

Example: There are 4 smoke alarms and 3 Carbon Monoxide alarms that need to be monitor in your household. Y ou will need seven KA300TX transmitters. All seven transmitters will be set at the same operation code as: 1000101010 If you use the KA300 system with the weather channel, hurricane, tornado, or earthquake alarms combine with the fire alarm a[...]

Keep the battery installed and turn the power switch to OFF before bringing it to the location. Mark on the given label for channel location as fire, mono-carbon, or weather alert and coordinate them with the installed transmitters. This label is available only for the KA300RX. Hearing Impaired people will need one KBS300RX in their bedroom for the[...]

INST ALL KA300 FOR MUL TI-F AMIL Y HOME OR HOTEL There is one hotel code applied for all KA300TX installed in the hallway . The room code is applied for each KA300TX in each room. W ith this set up, when there is an alarm triggered from a local fire alarm, the KA300RX receiver and KBS300RX will activate with channel one LED indicator . If the evacu[...]

KA300TX Uses 3VDC, CR2032 battery and it will be installed by the manufacturer . KA300RX Uses alkaline 9V battery . Do not use rechar geable batteries. KBS300RX Uses a 9V rechar geable battery (included). Do not use alkaline batteries. CHAPTER 2 INST ALLING BA TTER Y 6 Use a coin to open the back cover of the KBS300RX Install (A) Adapter Plug (B) S[...]

The operation code is set by DIP-switches located in the front of the KA300TX trans- mitter , and they are preset at the factory . If your KA300RX receiver does not respond to your KA300TX transmitter signal when the test button is pressed, or it activates from a false signal of a neighboring KA300 system, you need to change the operation code. Aft[...]

MOUNTING THE KA300TX ON THE EXISTING ALARM Use the self adhesive V elcro to attach the KA300TX to the siren of the existing alarm unit. Do not block the window of the smoke chamber or on top of the alarm sensor . KA300RX RECEIVER The alarm monitor KX300RX is designed to learn the operation code from your trans- mitter and program it to the memory .[...]

MOUNTING THE KA300RX ON THE W ALL The adapter of the KA300 is supplied with a nine feet line cord for installation to a normal outlet box. KBS300RX BED SHAKER RECEIVER: The bed shaker KBS300RX is a receiver . It needs to be programmed like the KA300RX before you can actually use it in the system. T o program the operation code, follow these steps: [...]

BED SHAKER LED INDICA TOR 1 Main LED: • T urns ON when there is a channel triggered by an alarm in the system. • Low flashing when there is AC power failure. • Fast flashing for battery low warning. It needs to be recharged soon. 2 Channel indicator LEDs: • T urns ON to indicate the corresponding channel has triggered the receiver . • Fla[...]

KA300TX T ransmitter, program the KA300RX with one KA300TX. • Install the KA300TX on the existing sensors and KA300RX on the wall. • Perform a test on each KA300TX, USING ALARM MONITOR WITH WEA THER ALERT RADIO. • Set operation code for the KW A300TX (weather alert transmitter). • Select channel 3 on KW A300TX and record it into the label o[...]

TESTING It is important to perform a test for your alarm system at least once a month to make sure the system is operating properly . Y ou are responsible for your family safety from fires, and any other possible disasters. Repair or replace your Alarm Monitor , and all other alarm systems when they no longer function. T o test the KA300 system 1. [...]

TROUBLESHOOTING: If any question should arise during the installation and testing, follow through the fre- quently asked questions below . Contact CompuTTY or your authorized dealer if you should have any more questions that these F AQs do not answer . 1. I have more than thr ee different kinds of alarm devices, how can I pr ogram it to one receive[...]

W orking Frequency.......................................................................................433MHz T ransmitter codes ................................................................................................1024 Receiver Memories ...................................................................................................3[...]

[...]

3408 Indale Road, Fort W orth, TX 761 16 V oice or TTY : (817) 738-2485 or (817) 738-8993 Fax: (817) 738-1970 E-mail: info@computty .com ORDERS: (800) 366-9950 www .computty .com[...]