Jonsered HT 2124 manuale d’uso

Oper ator’ s manual (EP A) Please read the oper ator’ s manual carefully and make sure y ou understand the instructions before using the machine .[...]

2 – English KEY T O SYMBOLS Symbols W ARNING! Incorrect or careless use of a hedge trimmer can tur n it into a dangerous tool that can cause serious or e ven f atal injur y . It is e xtremely impor tant that you read and understand the contents of this operator’ s manual. Please read the operator’ s manual carefully and make sure y ou underst[...]

English – 3 CONTENTS Contents Note the f ollowing bef ore starting: Please read the oper ator’ s manual carefully . Maintenance, replacement, or repair of the emission control de vices and system may be perf ormed by any nonroad engine repair establishment or individual. This label cer tifies that the product has been cer tified in accordance[...]

4 – English INTR ODUCTION Dear customer! Cong ratulations on y our choice to buy a Jonsered product! Y our purchase gives y ou access to prof essional help with repairs and ser vice whenev er this may be necessary . If the retailer wh o sells your machine is not one of our authorized dealers , ask for the address of y our nearest ser vicing deale[...]

English – 5 WHA T IS WHA T? What is what? 1 23 9 22 15 14 2 12 5 8 7 4 11 6 10 3 17 19 20 21 18 16 13 1 Operator’ s manual 2 Handle 3 Throttle lock 4 Fuel cap 5 Choke control 6 F ront handle 7 Blade guard 8 Blades 9 T ranspor t guard 10 Air filter cov er 11 Air purge 12 Fuel tank 13 Lock f or handle (HT2124T) 14 Throttle control 15 Spark plug [...]

6 – English GENERAL SAFETY PRECA UTIONS Impor tant P ersonal pr otective equipment HEARING PR O TECTION W ear hear ing protection that provides adequate noise reduction. EYE PRO TECTION Alwa ys wear approv ed eye protection. If you use a visor then you m ust also wear approv ed protective goggles . Approv ed protective goggles m ust comply with s[...]

English – 7 GENERAL SAFETY PRECA UTIONS Mac hine ′′ ′ ′ s safety equipment This section descr ibes the machine ′ s saf ety equipment, its pur pose, and ho w checks and maintenance should be carried out to ensure that it operates correctly . See the ”What is what?” section to locate where this equipment is positioned on your machine [...]

8 – English GENERAL SAFETY PRECA UTIONS Vibration damping system Y our machine is equipped with a vibration damping system that is designed to reduce vibration and mak e operation easier . The machine ′ s vibration damping system reduces the transf er of vibration between the engine unit/cutting equipment and the machine ′ s handle unit. The [...]

English – 9 GENERAL SAFETY PRECA UTIONS Blades T o ensure good cutting results it is impor tant that the contact pressure between the b lades is correct. The contact pressure is adjusted by turning the screws on the underside of the bar clockwise as f ar as they will go . Then turn the screws anticlockwise a 1/4 turn. Lock the screws using the lo[...]

10 – English FUEL HANDLING Fuel safety Ne ver star t the machine: 1 If you ha ve spilled fuel on it. Wipe off the spillage and allow remaining fuel to e vaporate . 2 If you ha ve spilled fuel on y ourself or your clothes , change your clothes . W ash any par t of your body that has come in contact with fuel. Use soap and water . 3 If the machine [...]

English – 11 FUEL HANDLING Mixing • Alwa ys mix the gasoline and oil in a clean container intended f or fuel. • Alwa ys star t by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline. • Mix (shake) the fuel mixture thoroughly bef ore filli[...]

12 – English ST AR TING AND ST OPPING Chec k before starting • Inspect the working area. Remove an y objects that could be thrown out. • Check the cutting attachment. Ne ver use b lades that are dull, crac ked or damaged. • Check that the machine is in perf ect wor king order . Check that all nuts and scre ws are tight. • Make sure the ge[...]

English – 13 W ORKING TECHNIQ UES General w orking instructions Safety instructions regar ding the surroundings • Ne ver allow children to use the machine . • Ensure that no-one comes closer than 15 m while you are working. • Ne ver allow an yone else to use the machine without first ensuring that they hav e understood the contents of the [...]

14 – English W ORKING TECHNIQ UES Safety instructions after completing w ork • The transpor t guard should alwa ys be fitted to the cutting attachment when the machine is not in use. • Make sure the cutting attachment has stopped bef ore cleaning, carr ying out repairs or an inspection. Disconnect the HT lead from the spark plug. • Alwa ys[...]

English – 15 MAINTENANCE Carb uretor Y our Jonsered product has been designed and manuf actured to specifications that reduce harmful exhaust fumes. The engine will be run in after it has used 8-10 tanks of fuel. T o ensure that the engine runs at peak performance and produces as little harmful exhaust fumes as possible after the running-in per [...]

16 – English MAINTENANCE Cooling system T o keep the working temperature as low as possib le the machine is equipped with a cooling system. The cooling system consists of: 1 Fins on the flywheel. 2 Cooling fins on the cylinder . 3 Cylinder cov er (directs cold air ov er the cylinder). Clean the cooling system with a brush once a week, more ofte[...]

English – 17 MAINTENANCE Gear housing There is a grease nipple and a plug f or filling lubricant on the gear housing. Use a grease gun to fill with grease. This should be done after e very 60 working hours. Use Jonsered special grease. CA UTION! The gear housing must not be filled completely with grease. The g rease expands as the machine heat[...]

18 – English MAINTENANCE Maintenance sc hedule The f ollowing is a list of the maintenance that must be perf or med on the machine. Most of the items are descr ibed in the Maintenance section. The user must only carr y out the maintenance and service work descr ibed in this manual. More extensiv e work must be carried out by an authorised ser vic[...]

English – 19 TECHNICAL D A T A T echnical data Note 1: Equivalent noise pressure le vel is calculated as the time-weighted energy total f or noise pressure lev els under various working conditions with the follo wing time distribution: 1/2 idle and 1/2 max. speed. T echnical data HT2124 HT2124T Engine Cylinder displacement, cu.in/cm 3 1,37/22,5 1[...]

20 – English FEDERAL EMISSION CONTR OL W ARRANTY ST A TEMENT Y OUR W ARRANTY RIGHTS AND OBLIGA TIONS The EP A (The US Environmental Protection Agency), Environment Canada and Jonsered are pleased to e xplain the emissions control system warranty on y our 2001 and later small nonroad engine. In U .S. and Canada, new small nonroad engines must be d[...]

[...]

´®z+RAo¶5c¨ ´®z+RAo¶5c¨[...]

[...]

´®z+RAo¶5c¨ 2007-01-30 ´®z+RAo¶5c¨ 1150337-95[...]