Invacare HMV Highly 400 manuale d’uso

Owner’s Operator and Maintenance Manual DEALER: This manual MUST be given to the user of the scooter. USER: BEFORE using this scooter, read this manual and save for future reference. For more information regarding Invacare products, parts, and services, please visit www.invacare.com HMV ™ Highly Maneuverable Vehicle 300 and 400[...]

300 and 400 2 Part No. 1118395  WARNING POWERED SCOOTER USERS: DO NOT SERVICE OR OPERATE THIS EQUIPMENT WITHOU T FIRST READING AND UNDERSTANDING THE OWNER’S OPERATOR AND MAINTENANCE MANUAL. IF YOU ARE UNABLE TO UNDERSTAND THE WARNINGS, CAUTIONS, AND INSTRUCTIONS, CONTACT INVACARE TECHNICAL SUPPORT BEFORE ATTEMPTING TO SE RVICE OR OPERATE THIS [...]

TABLE OF CONTENTS 300 and 400 3 Part No. 1118395 TABLE OF CONTENTS REGISTER YOUR PRO DUCT ................................................................ 6 SPECIAL NOTES ................................................................................ 9 TYPICAL PRODUCT PARAMETERS .................................................. 1 0 LABEL LOCATION[...]

TABLE OF CONTENTS Part No. 1118395 4 300 and 400 TABLE OF CONTENTS Operating the Scooter ............... ............................... ................................ ............................ ..................30 Brake Release Lever...... ...................................................................................................... .[...]

TABLE OF CONTENTS 300 and 400 5 Part No. 1118395 TABLE OF CONTENTS Removing/Installing the Caster Assemblies ........................ ............................... ............................... ..48 Removing ................ .........................................................................................................................[...]

REGISTER YOUR PRODUCT 300 and 400 6 Part No. 1118395 Installing/Removing the Rear Mounted Basket .................................... ............................... ...............68 Installing .............. ....................................................................................................... ................... ..........68 Rem[...]

Name _______________________________________________________________ Address _____________________________________________________________ City ___________________ State/Province __________ Zip/Postal Code ________ Email ___________________________________ Phone No. _________________ Invacare Model No. ______________________ Serial No. ____________[...]

Fold here Fold here Cut Along Line Invacare Product Registration Form Please Seal with Tape Before Mailing[...]

SPECIAL NOTES Part No. 1118395 9 300 and 400 SPECIAL NOTES W ARNING/CAUTION notices as used in this manual apply to hazards or unsafe practices which could result in personal injury or property damage. NOTICE THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. As a manufacturer of powered scooters, Invacare end eavors to[...]

TYPICAL PRODUCT PARAMETERS 300 and 400 10 Part No. 1118395 TYPICAL PRODUCT PARAMETERS *NOTE: 300 parameters ar e based on an 18-inch wide seat. *NOTE: 400 parameters ar e based on an 20-inch wide seat. 300 400 OVERALL DIM ENSIONS* BASE LEN GTH: BASE WI DTH: STEP HEI GHT (Floor Pan to Ground): SEAT HEI GHT (Floor Pan to Seat Cushion): 44 inches 22.5[...]

LABEL LOCATIONS Part No. 1118395 11 300 and 400 LABEL LOCATIONS ON 300 ! W ARNING Pinch P oint. 1079203 DO NOT oper ate the scooter unless the tiller is in the locked position. DO NOT lean against or pull f orward on the tiller while mounting or dismounting the scooter . Otherwise, injury may occur . ------------------------------------------------[...]

LABEL LOCATIONS 300 and 400 12 Part No. 1118395 ON 400 DO NOT oper ate the scooter unless the tiller is in the locked position. DO NOT lean against or pull f orward on the tiller while mounting or dismounting the scooter . Otherwise, injury may occur . -------------------------------------------------------------------------------------------- DO N[...]

SECTION 1—GENERAL GUIDELINES Part No. 1118395 13 300 and 400 SECTION 1—GENERAL GUIDELINES  WARNING SECTION 1 - GENERAL GUIDELINES contains important information for the safe operation and use of this product. DO NOT use this product or any available optional equipment without first completely reading and understandin g these instructions and[...]

SECTION 1—GENERAL GUIDELINES 300 and 400 14 Part No. 1118395 DO NOT climb and/or go UP or DOWN ramps or traverse slopes greater than 8°. When negotiating ram ps, if the throttle co ntrol lever is released while in the FORW ARD motion, the pow ered scooter will roll back a pproximately one (1) foot before the brake engages. If the throttle contro[...]

SECTION 1—GENERAL GUIDELINES Part No. 1118395 15 300 and 400 Ensure that the seat is locked i n the FORWARD position b efore and during the operation of the scooter . Otherwise, injury to the u ser and/or damage to the scooter may result. DO NOT adjust the seat position outsid e the specifications recommended by the manufacturer . Ensure that the[...]

SECTION 1—GENERAL GUIDELINES 300 and 400 16 Part No. 1118395 GROUNDING INSTRUCTIONS DO NOT , under any circumstances, c ut or remove the round grounding prong from any plug used with or for Inv acare products. Som e devices are equipped with three-prong (grounding) plugs for protection against possible shock hazards. Where a two-prong wall recept[...]

SECTION 1—GENERAL GUIDELINES Part No. 1118395 17 300 and 400 WEIGHT LIMITATION The we ight limitation for the 300 is 300 lbs. The we ight limitation for the 400 is 400 lbs. If so equipped, the front basket is rated f or a maximum loading capacity of 10 lbs.[...]

SECTION 2—EMI INFORMATION 300 and 400 18 Part No. 1118395 SECTION 2—EMI INFORMATION  WARNING CAUTION: IT IS VERY IMPORTANT T HAT YOU READ THIS INFOR MATION REGARDING THE POSSIBLE E FFECTS OF ELECTROMAGNETIC INTERFERENCE ON YOUR POWERED WHEELCH AIR. Electromagnetic Interference (EMI) From Radio Wave Sources Powered wheelchairs and motorized s[...]

SECTION 2—EMI INFORMATION Part No. 1118395 19 300 and 400  WARNING Powered Wheelchair Electromagn etic Interference (EMI) Because EM energy rapidly becomes more intense as one moves close r to the transmitting antenna (source), the EM fields from hand-held radio wave sources (transceivers) are of special concern. It is possible to unintentiona[...]

SAFETY/HANDLING OF POWERED SCOOTERS 300 and 400 20 Part No. 1118395 SECTION 3—SAFETY/HANDLING OF POWERED SCOOTERS “Safety and Handling” of the powered scoot er requires the close attention of the user . This manual points out the most common proce dures and techniques involved in the safe operation and maintenance. It is important to practice[...]

SAFETY/HANDLING OF POWERED SCOOTERS Part No. 1118395 21 300 and 400 Proper positioning is essential for your safety . STAIRWAYS  WARNING DO NOT attempt to move an occupied powered scooter between floors using a stairway. Use an elevator to move an occup ied powered scooter between floors. If moving a powered scooter between floors by means of a [...]

SECTION 4—SAFETY INSPECTION 300 and 400 22 Part No. 1118395 SECTION 4—SAFETY INSPECTION NOTE: Every six (6) months take your power ed sc ooter to a qualified technician for a t horough inspection and servicing. Regular cleaning will reve al loose or worn parts and enhance the smooth operation of your power ed scooter . T o operate pr oper ly an[...]

SECTION 4—SAFETY INSPECTION Part No. 1118395 23 300 and 400 ❑ Tighten locknut if the fro nt wheel wobbles noticeably or loosen locknut if the wheel binds to a stop. ❑ Ensure that the fork ste m bearing set is tight. ❑ Ensure that wheel bearings are clean and free of moisture. ❑ Ensure that the bolts and fasten ers on the caster assemblies[...]

SECTION 4—SAFETY INSPECTION 300 and 400 24 Part No. 1118395 INSPECT/ADJUST PERIODICALLY ❑ Ensure that the powered scooter drives straight (no excessiv e drag or pull to one side). ❑ Check frame for damage and corrosion. ❑ Ensure that the brake is eas y to engage/disengage. ❑ Inspect for no excessive side mov ement or binding when the driv[...]

SECTION 5—MAINTENANCE AND TROUBLESHOOTING Part No. 1118395 25 300 and 400 SECTION 5—MAINTENANCE AND TROUBLESHOOTING  WARNING After ANY adjustmen ts, repair or serv ice and BEFORE use, make sure that all attaching hardware is tightened securely - oth erwise, injury or damage may occur. Before performing any maintenance, adjustment or service,[...]

SECTION 5—MAINTENANCE AND TROUBLESHOOTING 300 and 400 26 Part No. 1118395 FIGURE 5.1 - LUB RICATION POINTS TROUBLESHOOTING SYMPTOM PROBABLE CAUSE SOLUTION LIMITED D RIVING DISTANCE. Battery not charged long enough. Batteries weak, w on’t hold charge. Charge batteries overnight or en sure eight (8) hours of charge between use. Replace batteries.[...]

SECTION 6—OPERATION OF THE POWERED SCOOTER Part No. 1118395 27 300 and 400 SECTION 6—OPERATION OF THE POWERED SCOOTER CONTROL PANEL NOTE: For the following informati on, r efer to FIGURE 6.1 and FIGURE 6.2. 1. SPEED CONTROL KNOB - Located on the TOP face of the control panel. The T urtle icon represents the slowest speed and the R abbit icon re[...]

SECTION 6—OPERATION O F THE POWERED SCOOTER 300 and 400 28 Part No. 1118395 FIGURE 6.1 - CONTROL PANEL 3. CHARGING INDICATOR - Located on the TOP face of the control panel as shown in FIGURE 6.1. Solid RED indicates the charger is on (plugged into w all receptacle). 4. STATUS INDICAT OR - Located on the TOP face o f the control panel as shown in [...]

SECTION 6—OPERATION OF THE POWERED SCOOTER Part No. 1118395 29 300 and 400 5. HEADLIGHT SWITCH - Located on the TO P face of the control panel of 400 only . Refer to Detail “B” of FIGURE 6.1. 6. ON/OFF KEY SWITCH - Located on RIGH T side of the control panel (FI GURE 6.1). 7. HORN SWIT CH - Located on the FRONT face of the control panel tow a[...]

SECTION 6—OPERATION O F THE POWERED SCOOTER 300 and 400 30 Part No. 1118395 OPERATING THE SCOOTER  WARNING After ANY adjustmen ts, repair or serv ice and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result. DO NOT make sharp turns in the for war d or reverse direction at excessive spe[...]

SECTION 6—OPERATION OF THE POWERED SCOOTER Part No. 1118395 31 300 and 400 NOTE: Throttle contr ol levers operate such that m oving one (1) will also move the opposite side throttle contr ol lever . 7. T o operate the scooter , depress the throt tle control lever in the following manner: A. T O MOV E FORW ARD - Push the RIGHT side throttle contro[...]

SECTION 6—OPERATION O F THE POWERED SCOOTER 300 and 400 32 Part No. 1118395 FIGURE 6.3 - BRAKE RELEAS E LEVER RESETTING THE CIRCUIT BREAKER  WARNING NEVER def eat or bypass the circuit breaker. ONLY replace with a cir cuit breaker of the same rating. NOTE: Key must be r emoved from igniti on befor e resetting cir cuit breaker . NOTE: For this [...]

SECTION 6—OPERATION OF THE POWERED SCOOTER Part No. 1118395 33 300 and 400 REPLACING THE FUSE  WARNING NEVER defeat or bypass any fuse . ONLY replace with a fuse of the same rating. NOTE: For this procedur e, refer to FIGURE 6.5. 1. Remov e seat. Refer to Rem oving/Installing the Seat on page 34. 2. Remov e rear shroud. Refer to Removing/Insta[...]

SECTION 7—SEAT 300 and 400 34 Part No. 1118395 SECTION 7—SEAT  WARNING After ANY adjustmen ts, repair or serv ice and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result. Before performing any maintenance, adjustment or service, tur n power OFF and remove key from ignition. REMOVING[...]

SECTION 7—SEAT Part No. 1118395 35 300 and 400 REMOVING/INSTALLING THE SEAT POST  WARNING Ensure that the seat post mounting screw is properly engaged and locked. Other- wise, injury and/or dam age may result. NOTE: T ake note of position and orientation of the seat post and seat post mounting screw befor e removing. NOTE: The seat post has th[...]

SECTION 7—SEAT 300 and 400 36 Part No. 1118395 ADJUSTING SEAT HE IGHT NOTE: For this procedur e, refer to FIGURE 7.2. 1. Remov e the seat. Refer to Removing/Installing the Seat on page 34. 2. Remov e the mounting screw , two (2) w ashers and locknut securing the seat post to the frame post. 3. Align the frame post mounting hole with one (1) of th[...]

SECTION 7—SEAT Part No. 1118395 37 300 and 400 FIGURE 7.3 - ADJU STING SEAT DEPTH 4. Adjust back assembly to one (1) of th ree (3) m ounting positions (FIGURE 7.3). 5. Reinstall the six (6) mounting screws se curing the back assembly to the seat b ase. Securely tighten. 6. Reinstall the adjustable width arms. R efer to Removing/Installing/Adjusti[...]

SECTION 7—SEAT 300 and 400 38 Part No. 1118395 NOTE: The seat locks in position at 90° intervals. The seat is locke d when an aud ible “click” is heard. 3. Rotate the seat to the desired position. 4. Release seat lev er to lock seat in desired position. NOTE: Ensure that th e seat is locked in position befor e operating the scooter . FIGURE [...]

SECTION 7—SEAT Part No. 1118395 39 300 and 400 FIGURE 7.5 - REMOVING/INS TA LLING SEAT POSITIONING STRAP Seat Positioning Strap Washer Mounting Screw Seat Positioning Strap Washer Mounting Screw Arm Frame[...]

SECTION 8—ARMS 300 and 400 40 Part No. 1118395 SECTION 8—ARMS  WARNING After ANY adjustments, r epair or service and BEFORE use, make sure all attaching hardware is tightened securely - othe rwise injury or damage may result. Before performing any maintenance, adjustment or service, tur n power OFF and remove key from ignition. REMOVING/INST[...]

SECTION 8—ARMS Part No. 1118395 41 300 and 400  CAUTION The arm can be adjusted to a maximum distance of 4½ inches from the inside of th e arm to the top of the mount ing shaft. If the ar m is adjusted beyond the m aximum 4½ inches, the arm will fa ll out. 2. Mov e arm IN or OUT to the desired position. 3. Retighten adjustment knob securely [...]

SECTION 8—ARMS 300 and 400 42 Part No. 1118395 3. Reinstall the lock knob th at secures the arm to the arm m ounting tube and tighten securely . 4. Repeat STEPS 1-3 for opposite arm, if necessary . FIGURE 8.3 - ADJUST ING ARM HEIGHT REPLACING ARMREST PADS NOTE: For this procedur e, refer to FIGURE 8.4. 1. Remov e the two (2) mounting screws that [...]

SECTION 9—TILLER ADJUSTMENT Part No. 1118395 43 300 and 400 SECTION 9—TILLER ADJUSTMENT ADJUSTING THE TI LLER ANGLE  WARNING Before performing any maintenance, adjustment or service, tur n power OFF and remove key from ignition. Ensure that tiller is properly ad justed before driving the scooter. After making ANY tiller angle adjustments and[...]

SECTION 10—REAR SHROUD 300 and 400 44 Part No. 1118395 SECTION 10—REAR SHROUD  WARNING After ANY adjustmen ts, repair or serv ice and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result. Before performing any maintenance, adjustment or service, tur n power OFF and remove key from ig[...]

SECTION 11—WH EELS AND CASTERS Part No. 1118395 45 300 and 400 SECTION 11—WHEELS AND CASTERS  WARNING After ANY adjustmen ts, repair or serv ice and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result. Before performing any maintenance, adjustment or service, tur n power OFF and rem[...]

SECTION 11—WHEELS AND CASTERS 300 and 400 46 Part No. 1118395 FIGURE 11.1 - REMOVI NG/INSTALLING THE DRIVE WHEEL S WARNING: PINCH POIN T Cutout Drive Shaft Keystock Washer Hex Nut Drive Wheel Scooter Frame DETAIL “A” - 300 DETAIL “B” - 400 Drive Shaft Keystock Washer Hex Nut Drive Wheel Swingarm Scooter Frame[...]

SECTION 11—WH EELS AND CASTERS Part No. 1118395 47 300 and 400 REMOVING/INSTALLING THE FRONT WHEEL NOTE: T ake note of position and orientation o f wheel and mounting hard war e before r emoving. NOTE: For this procedur e, refer to FIGURE 1 1.2. REMOVING 1. T urn power OFF and remove the key from the ignition. 2. Place the FRONT of the powered sc[...]

SECTION 11—WHEELS AND CASTERS 300 and 400 48 Part No. 1118395 REMOVING/INSTALLING THE CASTER ASSEMBLIES NOTE: For this procedur e, refer to FIGURE 1 1.3. REMOVING 1. Apply a wrench to the hex n ut on the caster assembly . 2. T urn the hex nut COUNTER-CL OCKWI SE to loosen and remove the caster wheel. 3. If necessary , repeat STEPS 1-2 to remove t[...]

SECTION 12—BATTERIES Part No. 1118395 49 300 and 400 SECTION 12—BATTERIES  WARNING Before performing any maintenance adju stment or service, turn power OFF and remove key from ignition. NEVER allow any of your tools and/or batter y cable(s) to contact BOTH batter y terminal(s)/post(s) at t he same time. An electrical short may occur and seri[...]

SECTION 12—BATTERIES 300 and 400 50 Part No. 1118395 NOTE: If ther e is battery acid on the rear frame or on the sides of the batteries, apply baking soda to these areas to neutralize the bat tery acid. Before reinstalling the new or existing batteries, clean the baking soda from the batte ry tray or batteries. RECOMMENDED BATTERY TYPE  WARNIN[...]

SECTION 12—BATTERIES Part No. 1118395 51 300 and 400 REMOVING NOTE: For this procedur e, refer to FIGURE 12.2. 1. Place the pow ered scoote r in a well v entilated area where work can be performed without risking damage to carpeting or floor cov ering. 2. T urn power OFF and remove the key from the ignition. 3. Remov e the seat. Refer to Removing[...]

SECTION 12—BATTERIES 300 and 400 52 Part No. 1118395 7. Connect the RED and BLACK battery connector to the wiring harness assembly . Tighten securely . 8. Secure batteries in the battery tray using the battery strap (Detail “ A” of FIGURE 12.2). 9. Reinstall the rear shroud. Refer to Re moving/Installing the Rear Shroud on page 44. 10. Reinst[...]

SECTION 12—BATTERIES Part No. 1118395 53 300 and 400 REMOVING/INSTALLING THE BATTERIES ON 400 NOTE: For this procedur e, refer to FIGURE 12.2. REMOVING 1. Place the pow ered scoote r in a well v entilated area where work can be performed without risking damage to carpeting or floor cov ering. 2. T urn power OFF and remove the key from the ignitio[...]

SECTION 12—BATTERIES 300 and 400 54 Part No. 1118395 FIGURE 12.3 - REMOVING/INSTALLING THE B ATTERIES ON 400 Battery Tray NOTE: Seat and Rear Shr oud not shown for clarity . Battery Tray Batteries Installed Batteries Removed Battery Strap BLACK Battery Connector POSITIVE (+) RED Battery Terminal NEGATIVE (-) BLACK Battery Terminal POSITIVE (+) RE[...]

SECTION 12—BATTERIES Part No. 1118395 55 300 and 400 CONNECTING/DISCONNECTING THE BATTERY CABLES ON THE 400  WARNING On 400 only - Battery terminal configuration shown below MU ST be u sed. B atteries that have the reversed terminal configuration MUST NOT be used - otherwise serious injury or damage may occur. NEVER allow any of your tools and[...]

SECTION 12—BATTERIES 300 and 400 56 Part No. 1118395  WARNING When connecting the battery cables to th e batteries, the battery cables MU ST be connected to the battery termin als/posts as shown in FIGURE 12.5, otherwise dam- age to the battery cable may result when installing battery terminal caps. 2. Connect battery cable(s) to ba ttery(ies)[...]

SECTION 12—BATTERIES Part No. 1118395 57 300 and 400 5. Slide terminal cap(s) UP on the battery cab le(s). 6. Disconnect battery cable(s) from battery(ies) term inal(s)/post(s): A. POSITIVE (+) RED battery cable from the POSITIVE (+) b attery terminal/post. B. NEGATIVE (-) BLACK battery cable from NEGA TIVE (-) battery terminal/post. FIGURE 12.5 [...]

SECTION 12—BATTERIES 300 and 400 58 Part No. 1118395 CHARGING THE BATTERIES  WARNING NEVER attempt to recharge the batteries by attaching cables directly to the battery terminals o r clamps. DO NOT attempt to recharge the batteri es and operate the powered scooter at the sam e time.  CAUTION New batteries MUST be fully charged prior to init[...]

SECTION 12—BATTERIES Part No. 1118395 59 300 and 400 FIGURE 12.6 - CHARGING THE BATTERIES BATTERY CHARGER OPERATION - CHARGER INDICATOR LIGHT ON TILLER NOTE: If the scooter is turned on while char ging, the battery char ge indicator will show the batteries at FULL charge. The char ger must be unplugged and the power ed s cooter must be ON to show[...]

SECTION 13—TRANSPORTING 300 and 400 60 Part No. 1118395 SECTION 13—TRANSPORTING  WARNING After ANY adjustmen ts, repair or serv ice and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result. Before performing any maintenance, adjustment or service, tur n power OFF and remove key from [...]

SECTION 13—TRANSPORTING Part No. 1118395 61 300 and 400 FIGURE 13.1 - TRANS PORTING THE SCOOTER - 300 400 NOTE: For this procedur e, refer to FIGURE 13.2 . DISASSEMBLING 1. If installed on scooter , remove the front ba sket. Refer to Removing/Installing the Front Basket on page 64. 2. Remov e the seat. Refer to Removing/Installing the Seat on pag[...]

SECTION 13—TRANSPORTING 300 and 400 62 Part No. 1118395 A. Use the one hand to firmly hold the tiller handle. B. Using the other hand, firmly hold th e Y E LLOW frame lock lev er [located und er marker label # 2 ]and pull UP to the Unlocked position as shown in Detail “C” of FIGURE 13.2. NOTE: The frame lock lever re mains in the unlocked pos[...]

SECTION 13—TRANSPORTING Part No. 1118395 63 300 and 400 FIGURE 13.2 - TRANS PORTING THE SCOOTER - 400 1 2 2 1 2 Motor Connector Motor Connector BLACK Battery Connectors RIGHT Battery LEFT Battery Rear Frame Assembly Front Frame Assembly Frame Lock Lever Front Frame Assembly UP to Unl ock DOWN to Lock Mounting Bracket Mounting Bracket Refer to Rem[...]

SECTION 14—SCOO TER ACCESSORIES 300 and 400 64 Part No. 1118395 SECTION 14—SCOOTER ACCESSORIES  WARNING After ANY adjustmen ts, repair or serv ice and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result. Before performing any maintenance, adjustment or service, tur n power OFF and r[...]

SECTION 14—SCOO TER ACCESSORIES Part No. 1118395 65 300 and 400 INSTALLING/REMOVING THE CRUTCH/CANE HOLDER NOTE: The Crutch/Cane Holder , Safety Flag and O xygen Holder all install into the accessory tube; ONL Y one (1) of these may be installed at a time.  WARNING The installation of the crutch/cane h older onto the back of the scooter seat s[...]

SECTION 14—SCOO TER ACCESSORIES 300 and 400 66 Part No. 1118395 INSTALLING/REMOVING THE SAFETY FLAG NOTE: For this procedur e, refer to FIGURE 14.3.  WARNING The installation of the safety flag on to the back of the scooter seat significantly increases the length of the scooter. When turning the scooter or swiv eling the scooter seat, it is im[...]

SECTION 14—SCOO TER ACCESSORIES Part No. 1118395 67 300 and 400 INSTALLING/REMOVING THE WALKER HOLDER NOTE: Reverse this pr ocedure to r emove the walker holder . NOTE: For this procedur e, refer to FIGURE 14.4. 1. If necessary , loosen but do not remove the mounting knob. 2. Install the w alke r holder into the accessory tube. 3. Thread the moun[...]

SECTION 14—SCOO TER ACCESSORIES 300 and 400 68 Part No. 1118395 INSTALLING/REMOVING THE REAR MOUNTED BASKET NOTE: For this procedur e, refer to FIGURE 14.6.  WARNING The rear mounted basket is rated for a m aximum capacity of ten (10) lbs. After ANY adjustmen ts, repair or serv ice and BEFORE use, make sure that all attaching hardware is tight[...]

Part No. 1118395 69 300 and 400 NOTES[...]

300 and 400 70 Part No. 1118395 NOTES[...]

LIMITED WARRANTY Part No. 1118395 71 300 and 400 LIMITED WARRANTY PLEASE NOT E: THE WARRANTY BE LOW HAS BE EN DRAFTE D TO COMP LY WITH FEDERAL L AW APPLICABLE TO PROD UCTS MANUFACT URED AFTE R JULY 4, 1975. This warranty is extended only to the orig inal purchaser/user of our products. This warranty gives you specific legal rights and you may also [...]

Invacare Corporati on www.invacare.com USA One Invacare Way Elyria, Ohio USA 44036-2125 800-333-6900 Canada 570 Matheson Blvd E Unit 8 Mississaugua Ontario L4Z 4G4 Canada 800-668-5324 Invacare is a registered trademark of Invacare Corporation. Teflon is a registered trademark of E.I. DuPont Nemours and Company. Yes, you can. and HMV are trademarks [...]