Image IMTL39105.2 manuale d’uso

Model No. IMTL39105.2 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If y ou have questions, or if parts are damaged or missing, PLEASE CONTAC[...]

T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . .[...]

3 W ARNING: T o reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure t hat all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as desc[...]

4 20. When folding or moving the treadmill, make sure that the storage latch is fully closed. 21. Inspect and properly tighten all parts of the treadmill every three months. 22. Never drop or insert any object into any open- i ng. 23. DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing th[...]

5 Thank you for selecting the new IMAGE ® 15.0 R tread- mill. The IMAGE 15.0 R treadmill off er s a s el ect io n of features designed to make your workouts at home m ore enjoyable and effective. An d wh en y ou’ re n ot e x- e rcising, the unique IMAGE 15.0 R treadmill can be folded up, requiring less than half the floor space of other treadmil[...]

ASSEMBL Y T o hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own Phillips scre[...]

7 3. With the help of a second person, carefully tip the tread- mill back to the upright position. Identify the Right Handrail (72), which has a large hole in the left side. Feed the Upright Wire (42) into the hole in the bottom of the Right Handrail and out of the large hole in the side. Note: It may be helpful to use needlenose pli- ers to pull t[...]

8 Small Hole 71 4. Hold the Console Base (47) near the Left Handrail (71). Attach the end of the ground wire on the Console Base t o the indicated small hole in the Left Handrail with the Silver Ground Screw (75). 47 75 G round W ire 42 5. Touch the Right Handrail (72) to discharge any static. Slide the sleeve off the connector on the Upright Wire [...]

9 10. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 18). To protect the floor or carpet, place a mat under the treadmill. 8. Lower the Uprights (9, 61) until the handra[...]

10 THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- i cone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD Your treadmill, like an[...]

FEATURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button. As you exercise, the console will display continuous exercise feedback. You can even measure yo[...]

12 H OW TO USE THE MANUAL MODE Insert the key into the console. See HOW TO TURN ON THE POWER on page 1 1. Select the manual mode. When the key is in- serted, the manual mode will be selected. If a program has been selected, press the Program button repeat- edly until the right display shows a time of 0:00. Start the walking belt. To start the walki[...]

13 Measure your heart rate if desired. To measure your heart rate, stand on the f oot rails a nd place your left thumb on the pulse sensor. Do not press too hard, or the circulation in your thumb will be restricted and your pulse will not be detected. When your pulse is detected, a heart-shaped indicator in the left display will flash each time you[...]

14 To stop the program temporarily, press the Stop button. The time will begin to fla sh in the ri ght di s- p lay. To restart the program, press the Start bu tt on or the Speed increase button. The walki ng bel t wil l b egin to move at 2 mph. To end the program, press the Stop button, remove the key, and then r einsert the key. Follow your progre[...]

15 To stop the program temporarily, press the Stop button. The time will begin to fla sh in the ri ght di s- p lay. To restart the program, press the Start bu tt on or the Speed increase button. The walki ng bel t wil l b egin to move at 1 mph. When the next period of the program begins, the treadmill will autom atic ally a djust to the speed and i[...]

16 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- m anently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hol[...]

TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call the toll-free telephone number on the f ront cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into[...]

18 PROBLEM: The walking belt slows when walked on S OLUTION: a . Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. b . If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD . Using the allen wre[...]

19 The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with the proper intensity. Th[...]

P ART LIST—Model No. IMTL39105.2 R0706A 1 1 Hood 2 26 3/4” Screw 3 1 Motor Belt 4 2 Motor Tension Bolt 5 2 4” Bolt 6 1 Motor Star Washer 7 1 Flywheel 8 1 Drive Motor 9 1 Right Upright 10 1 Reed Switch 11 1 Latch Warning Decal 12 2 Frame Spacer 13 7 Frame Pivot Nut/Motor Nut 14 2 Frame Pivot Bolt 15 4 Walking Platform Screw 16 2 Foot Rail 17 1[...]

72 2 2 2 2 31 2 2 2 29 44 2 40 40 37 80 37 80 102 67 67 98 99 28 10 49 12 19 13 13 60 92 13 12 14 21 16 18 17 14 15 74 16 82 83 87 15 90 86 15 88 92 38 92 38 93 81 58 83 82 58 69 13 53 57 39 39 57 51 54 13 62 64 32 66 25 89 77 68 85 42 102 70 15 94 58 1 1 56 71 33 3 4 6 7 8 55 20 49 30 42 75 2 59 37 37 2 47 57 36 34 95 95 50 43 1 13 54 13 54 45 58 [...]

LIMITED W ARRANTY ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions. The drive motor is warranted for three (3) years after the date of purchase. Parts and labor are warranted for ninety (90) days after the date of purchase. This warranty extend[...]