Iiyama ProLite B2080HSD-B1 manuale d’uso

ENGLISH USER MANUAL Thank you very much for choosing the iiyama LCD monitor . We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor . Please keep this manual in a safe place for your future reference.[...]

ENGLISH[...]

ENGLISH Congratulations! This display is designed for both you and the planet! The display you have just purchased carries the TCO Certified label. This ensures that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, des[...]

ENGLISH CE MARKING DECLARA TION OF CONFORMITY This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC Directive” , 2006/95/EC “Low V oltage Directive” and 2009/125/EC “ErP Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business an[...]

ENGLISH T ABLE OF CONTENTS FOR YOUR SAFETY .......................................................................... 1 SAFETY PRECAUTIONS .............................................................. 1 SPECIAL NOTES ON LCD MONITORS .......................................3 CUSTOMER SER VICE .........................................................[...]

ENGLISH FOR YOUR SAFETY 1 FOR YOUR SAFETY W ARNING STOP OPERA TING THE MONITOR IF YOU ARE A W ARE OF ANY PROBLEMS If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately . Further use may be dangerous and can cause fi re or electric shock. NEVER RE[...]

ENGLISH 2 FOR YOUR SAFETY CAUTION INST ALLA TION LOCA TION Do not install the monitor where sudden temperature changes may occur , or in humid, dusty or smoky areas as it may cause fi re, electric shock or damage. Y ou should also avoid areas where the sun shines directly on the monitor . DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monito[...]

ENGLISH FOR YOUR SAFETY 3 The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE  When you fi rst turn on the LCD monitor , the picture may not fi t in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position.  Due to the nature of[...]

ENGLISH 4 BEFORE YOU OPERA TE THE MONITOR The following accessories are included in your package. Check to see if they are enclosed with the monitor . If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama of fi ce. BEFORE YOU OPERA TE THE MONITOR CHECKING THE CONTENTS OF THE P ACKAGE FEA TURES  Supports R[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 5  When you use with the wall mounting, in consideration of thickness of the mounting stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor . Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside th[...]

ENGLISH 6 BEFORE YOU OPERA TE THE MONITOR  Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped.  Do not give a strong impact to the monitor . It may cause damage.  Unplug the monitor before removal or installation to avoid electric shock or damage. CAUTION FITTING AND REMOV AL OF B[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 7  Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped.  Do not give a strong impact to the monitor . It may cause damage.  Unplug the monitor before removal or installation to avoid electric shock or damage. CAUTION <Installation> Put [...]

ENGLISH 8 BEFORE YOU OPERA TE THE MONITOR CONTROLS AND CONNECTORS : ProLite B2080HSD <Front> <Back> Power Switch ( ) Menu Button (MENU) + / V olume Button ( + / ) Power Indicator Blue: Normal operation Orange: Power Management - / ECO Button ( - / ) Auto Button (AUTO) Speakers D-SUB mini 15pin Connector (D-SUB) DVI-D 24pin Connector (DV[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 9 CONTROLS AND CONNECTORS : ProLite E2080HSD <Front> <Back> Power Switch ( ) Menu Button (MENU) + / V olume Button ( + / ) Power Indicator Blue: Normal operation Orange: Power Management - / ECO Button ( - / ) Auto Button (AUTO) Speakers D-SUB mini 15pin Connector (D-SUB) DVI-D 24pin Connector (DV[...]

ENGLISH 10 BEFORE YOU OPERA TE THE MONITOR CONNECTING YOUR MONIT OR : ProLite B2080HSD Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the m[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 1 1 CONNECTING YOUR MONIT OR : ProLite E2080HSD Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the [...]

ENGLISH 12 BEFORE YOU OPERA TE THE MONITOR  Signal Timing Change to the desired signal timing listed on page 30: COMPLIANT TIMING.  Windows 95/98/2000/Me/XP/Vista/7 Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows 95/98/2000/Me/XP/Vista/7 by connecting the monitor to DDC[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 13 ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B2080HSD  For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor , then adjust the monitor ’s height and angle to your own preference.  Hold the panel so that the monitor does not topple when [...]

ENGLISH 14 OPERA TING THE MONITOR OPERA TING THE MONIT OR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 30. Y ou are also able to adjust the picture by following the button operation shown below . For more detailed adjustments, see page 21 for SCREEN ADJUSTMENTS.  Press[...]

ENGLISH OPERA TING THE MONITOR 15 ADJUSTMENT MENU CONTENTS Adjustment Item Problem / Option Button to Press Luminance T oo dark T oo bright Brightness * Contrast T oo dull T oo intense * Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. Luminance Contrast Brightness Eco i-Style Color 50 50 Off St[...]

ENGLISH 16 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press Image Setup Phase* 1,2 Clock* 1,2 T oo left T oo right T oo low T oo high H. Position* 2 V . Position* 2 T oo narrow T oo wide T o correct fl ickering text or lines Image Setup Clock Phase H.Position V .Position 50 50 50 50 Aspect Full * 1 See page 21 for SCREEN ADJ[...]

ENGLISH OPERA TING THE MONITOR 17 Adjustment Item Problem / Option Button to Press Color T emp. Y ellowish white Bluish white User-G User-R User-B T oo weak T oo strong User Greenish white Normal Mode1 Mode2 Dark High contrast Mode3 Color T emp. Gamma User-R User-G User-B 50 50 Mode1 50 Color T emp. War m Gamma Color T emp. Normal W arm Cool sRGB s[...]

ENGLISH 18 OPERA TING THE MONITOR Language English Deutsch English German Français French Japanese Portuguese Italiano Italian Russian Simpli fi ed Chinese Español Spanish Portuguese T imeout H.Position OSD is too left OSD is too right OSD is too low OSD is too high Y ou can set the OSD display duration time between 5 and 60 seconds. Adjustment [...]

ENGLISH OPERA TING THE MONITOR 19 See your graphic card user guide for more information about changing the resolution and refresh. NOTE Displays information regarding the current input signal coming from the graphic card in your computer . Information Adjustment Item Problem / Option Button to Press Extra Reset Factory-preset data is restored. No R[...]

ENGLISH 20 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press V olume T oo soft T oo loud Adjustment Item Problem / Option Button to Press Auto Adjust * Y ou can skip the Menu items and display an adjustment scale directly by using the following button operations. Direct Adjust H. / V . Position, Clock and Phase automatically .[...]

ENGLISH OPERA TING THE MONITOR 21 SCREEN ADJUSTMENTS  The screen adjustments described in this manual are designed to set image position and minimize fl icker or blur for the particular computer in use.  The monitor is designed to provide the best performance at resolution of 1600 × 900, but can not provide the best at resolutions of less t[...]

ENGLISH 22 OPERA TING THE MONITOR F 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.  When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2).  Another way to make the Clock adjustment is to[...]

ENGLISH OPERA TING THE MONITOR 23  In case the strong fl icker or blurs remain on a part of the screen, repeat steps F and G because the Clock may not be adjusted correctly . If the fl icker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again.  Adjust the H.Position after the Phase adjustment [...]

ENGLISH 24 OPERA TING THE MONITOR  Even when using the power management mode, the monitor consumes electricity . T urn off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption.  It is possible that the video signal from the computer may be on while the H or V sync sig[...]

ENGLISH TROUBLE SHOOTING 25 TROUBLE SHOOTING 1. Perform the adjustments described in OPERA TING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot fi nd an appropriate adjustment item in OPERA TING THE MONITOR or if the problem persists. 3. If you are exper[...]

ENGLISH 26 TROUBLE SHOOTING / RECYCLING INFORMA TION No sound.  The audio equipment (computer etc.) is ON.  The Audio Cable is properly connected.  The V olume is turned up.  The audio output level of the audio equipment is within the speci fi cation of the monitor .  The audio output level of the audio equipment is w[...]

ENGLISH APPENDIX 27 SPECIFICA TIONS : ProLite B2080HSD APPENDIX Design and speci fi cations are subject to change without prior notice. * Audio equipment is not connected. LCD Panel Panel technology TN 0.2768mm H × 0.2768mm V Response time Pixel pitch 5ms (Black, White, Black, T ypical) Display Colours Approx.16.7M Sync Frequency Analog: Horizont[...]

ENGLISH 28 APPENDIX SPECIFICA TIONS : ProLite E2080HSD * Audio equipment is not connected. LCD Panel Panel technology TN 0.2768mm H × 0.2768mm V Response time Pixel pitch 5ms (Black, White, Black, T ypical) Display Colours Approx.16.7M Sync Frequency Analog: Horizontal: 24.0-80.0kHz, V ertical: 56-75Hz Digital: Horizontal: 30.0-80.0kHz, V ertical:[...]

ENGLISH APPENDIX 29 DIMENSIONS : ProLite B2080HSD DIMENSIONS : ProLite E2080HSD 445.0mm/17.5” 478.0mm/18.8” 251.0mm/9.9” 302.0mm/1 1.9” 49.0mm/1.9” 351.0mm/13.8” 219.5mm/8.6” 204.5mm/8.0” 445.0mm/17.5” 478.0mm/18.8” 251.0mm/9.9” 302.0mm/1 1.9” 244.5mm/9.6” 49.0mm/1.9” 375.5mm/14.8”(505.5mm/19.9”) ( ) : Maximum adjust[...]

ENGLISH 30 APPENDIX M101A21 COMPLIANT TIMING 640 × 480 832 × 624 1024 × 768 Dot Clock 25.175MHz 31.500MHz 31.500MHz 36.000MHz 40.000MHz 49.500MHz 50.000MHz 65.000MHz 75.000MHz 78.750MHz 108.000MHz 135.000MHz 97.750MHz 30.240MHz 57.283MHz 80.000MHz 21.053MHz V ertical Frequency 59.940Hz 75.000Hz 72.809Hz 56.250Hz 60.317Hz 75.000Hz 72.188Hz 60.004[...]