Hisense Group LCD3704NEU manuale d’uso

LCD3704NEU USER'S MANUAL LCD COLOUR TV Part No: R[...]

The symbol of the dustbin barred means that this apparatus cannot be put at the rebus with not sorted waste domestic running. It is interdict to throw with not sorted waste domestic running, of deposited on the public thoroughfare or at any other place not envisaged to this end. This apparatus contains substances being able to be harmful for the en[...]

-1- WARNING: T O PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORT ANT SAFEGUARD FIRE AND SHOCK PRECAUTIONS Adequate ventilation must be provided to prevent heat build up inside unit. Keep the inside of unit free from foreign objects, such as hairpins, nails, paper , etc. Do not build the set into a bookcase or [...]

Language english General s ettings Colour sy stem Noise r educe Factory re set Sleep ti mer Deinterlacer[...]

- 3 - Selecting a location for the TV 1)Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen. 2)Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the TV . NOTE: Please contact local dealer for wall mounting. Prepa[...]

R L AU D I O I N Note: The above figures are for reference only , please refer to the actual units to determine their appearance. SCART2 SCA RT1 - 4 - B B R R COMPO N ENT I N AN T I N 75[...]

Preparation for Using your new TV Caution: Do not plug the TV in until you have finished connecting all of your equipment. Connecting your TV T o enjoy its multimedia features, you can connect your to A/V equipments such as VCR, DVD, STB, Satellite receiver, Camcorder , Audio amplifier etc., and select signal sources using your remote control. TV C[...]

Preparation for Using your new TV T o enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna (not supplied). Perfect picture quality requires a good signal and generally means that an outdoor antenna must be used. The exact type and location of the antenna will depend on your particular area. Consul[...]

Preparing the remote control for use Installing the remote control batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery compartment. 3. Close the battery cover. Note: 1.Dispose of your batteries in a designated disposal ar[...]

Learning about the remote control Using the remote control - 8-[...]

Using the TV features Basic Operations Multimedia - TV receiver , Video monitor and PC display , all in one. Wider viewing angle, 16:9 display - 176 ¡ã viewing angle at typical value Digital display device - truthfully reproducing the images, without distortion or blurring, irrespective of magnetic or geomagnetic effect. 200 channels storage Slee[...]

Using the TV features Power ON/OFF Select channels by [ CH+/CH- ] You can also use[CH+ / CH-] to se lect channels. ndicates channel number increase; indicates channel number decrease. [CH+] i [CH-] Press [Display] button to display the present channel number, but it will also disappear 3 seconds after your pressing. Display channel number Press the[...]

Using the TV features 11- Using the TV settings menu 1) Press the MENU button to enter the main menu. 2) Press the [VOL+ or VOL-] button to select the item TV settings. 3) Press the [CH+ or CH-] button to select Auto search and press the [ VOL+ ] button to enter Auto search . 4) Press the [ VOL+ ] button to switch among Normal and Auto +L/L`. AUTO-[...]

-12 - Using the Picture menu Using the TV features PROGRAM Picture parameters Brightness Contrast Saturation Colour temp Sharpness 1) Press the [MENU] button to enter the main menu. 2) Press the button to select the item Picture Parameters. 3) Press the button to select the item you want to adjust. 4) Press the button to adjust the level. 5) The ad[...]

-13 - Using the TV features OSD settings Using the OSD settings menu OSD po sition OSD ti meout OSD la nguage OSD lo ck Tra nsparency 1) Press the [MENU] button to enter the main menu. 2) Press the button to select the item OSD settings. 3) Press the button to select OSD position 4) Press the button to adjust the OSD POSITION [VOL+ or VOL-] [VOL+ o[...]

1) Press the MENU button to enter the main menu. 2) Press the [VOL+ or VOL-] button to select the item General settings 3) Press the [CH+ or CH-] button to select Factory reset. 4) Press the [ VOL+-] button to select Y es or No . Factory reset 1) Press the MENU button to enter the main menu. 2) Press the [VOL+ or VOL-] button to select the item Gen[...]

-15- Using the TV features Teletext Operations Select the channel that is broadcasting the desired T eletext program. Press [ TEXT ] button and alternate between T eletext mode and normal mode. Note: All the operations below should be under the T eletext mode except TIME operation. Selecting teletext mode Page selection You can directly input your [...]

Size (top/bottom/full) Press the [ PC ] button to display the TOP HALF of the page. Press again to display the BOTTOM HALF of the page. Press again to return to a FULL P AGE display. Note: Changing pages reverts to a FULL P AGE display. Fast text The RED, GREEN, YELLOW & CYAN buttons are used for quick access to colour coded pages transmitted b[...]

Also known as Peritel, this standard provides a cheap multi-signal connector to domestic TV and other video equipment. Arrangement 1 is the original and allows for composite video input/output, RGB inputs and stereo audio input/output. Arrangement 2 allows for composite video input/output,and stereo audio input/output. Cation:The output of video an[...]

SCART arrangement 2 Pin Signal Signal level Impedance 1 Audio output B (right) 0.5V rms <1kohm 2 Audio input B (right) 0.5V rms >10kohm 3 Audio output A (left) 0.5V rms <1kohm[...]

SCART arrangement 3 Pin Signal Signal level Impedance 1 Audio output B (r ight) 0.5V rms <1kohm 2 Audio input B (r ight) 0.5V rms >10kohm 3 Audio output A (left) 0.5V rms <1kohm 4 Ground (audio) - - 5 Ground - - 6 Audio input A (left) 0.5V rms >10kohm 7 - 8 High (9.5 - 12V) - AV mode Low (0 - 2V) - TV m ode >10kohm 9 Ground - - 10 11[...]

Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Symptoms Possible Solutions TV will not turn on No picture, no sound No sound, p icture OK Poor sound, p icture OK Poor picture, sound O K Unable t o s elect a c ertain channel Poor colour or no colour The re[...]

-21 - Specifications T elevision system Channel c overage Multi- system(P AL,SECAM) VHF-L: E2-S8 VHF-H: S9-S37 UHF: S38-E69 LCD panel 940.3mm TFT LCD Power source Power consumption Audio output Connection interface Dimensions AC160V --240V , 5 0/60Hz 200W 5W+5W 950mmX760mmX107mm Design and specifications are subject to change without notice. Contra[...]