Hawking Technology HNC210 manuale d’uso

1[...]

Step 1: Check Conte nts & Install at i on Re qui rements 3 Step 2: Physical Description 5 Step 3: Hardware Installation 7 Step 4: Run the Quick Setup Wizard 9 Step 5: Viewing & Tips 24 2[...]

Congratulations on the purchase of your new Hawking Net- Vision TM HNC210 Wired 10/100Mbps Network Camera. The HNC210 is a high perform ance standalone camera system that provides an ideal solu tion for remote mo nitoring, surv eillance, or sending l ive vide o over the I nternet. T he camera of fers a broa d array of applications and can be used t[...]

4[...]

Front Panel Lens & Manual Focus Rin g LED: Link/Activit y LED: Read y LEDs - Link/Activity: Green when monitoring; flash ing for v ide o transmission/ reception - Ready: Orange when device is powered on & ready for access 5[...]

Bottom Panel Reset Button Power In p ut LAN Port 6[...]

1 1 Locate the net work cable connector (RJ-45 port) on the camera’s bottom panel. Conn ect an Ethernet cable to the port. Connect the ot her end of the cable to the network. 7[...]

2 2 Locate the power input connector on the camera’s bottom panel, and att ach the external power supply. Then, plug the adapter into an ava ilable outlet. Ple ase check to see that the ora nge “Ready” LED lo cated next to the lens of the camera is lit t o ensure that the cam era is powered on. (To en sure that there is a network connection, [...]

1 Insert the Hawkin g Net-Vision TM HNC210 Installat ion & Utilities CD into your CD-ROM Drive. When the main page loads, click on Quick Setup Wizard . 1 9[...]

2 2 The Setup Wizard will search fo r similar cameras available on your local area network. A “similar” cam era will have the same code of four letters at t he beginning of its serial number. This code is “HEMT” and can be found on either the ri ght or left panel of the box, or on the label on the bott om of the cam era. 10[...]

Each available camera will be displayed in the camera list with its MAC ad dress, current default IP address, an d model number. (NOTE: The Setup Wizar d may display an IP address for the camera that is already consistent wit h your network [LAN] settings, rather than the default on e.) In the camera list, click on the camera you would like to conf[...]

3 Next, the login username and password screen will appear. Please type in the de fault logi n and password a nd then press “ OK ”. The default values are: Login: admin Password: 12 34 If you have al ready set a usernam e and password , enter them and press “ OK ”. 3 12[...]

4 The Setup Wizard will try to determine your network settings. If a DHCP server is prese nt on your net work, the Wizard will obtain your network settings and auto matically configure you r network camera to oper ate on your LAN by returning network settings that are con sistent with your network. If no DHCP server is present, the Wizard will poll[...]

4 14[...]

5 To protect your camera fro m unauthorized access and use, you will need to chang e the Admin Password , which is “1234” by default . The password can have a ma ximum of four characters . Confirm the new pass word by typing i t again identically in the “R econfirm” field. Click Next once you have confirmed yo ur new password. 5 15[...]

6 The following status page will appear. It will display a summary of t he changes y ou have m ade to the netwo rk camera’s settings. If all the settings are correct, click Next to continue. 6 16[...]

7 The setup process has now been completed. Please brief ly revie w the te xt on t he page before clicki ng on Reboot . After clicking Reboot , the Setup Wizard will close. Please allow about 45 seconds to one minute for the camera to reboot. After the camera has finished rebooting, you can type in its new IP address in your web browser to begin ac[...]

Example on How to Set th e IP Address Manua lly The example shown her e illustrates how to manually set an IP address using the Windows XP operating system. However, the procedure is similar for all other versions of Windows. When setting an IP address, you must make sure that the address you specify has the sam e first three oct ets (or segment s)[...]

a. Click on Start in the bottom l eft corn er of your screen. Then click on My Network Places . a 19[...]

b. Click on View Network Connections . b 20[...]

c. In the Network Connections window, you should see an icon titled Local Area Connection (or something similar). You can access this icon in two ways : a . by clicking or doub le- clicking on it, or b . by right-clicking on it and then clicking on Status from the resulting menu. c 21[...]

d. A window with the title Local Area Connection Status (or something similar) will appear. (See the figure on the following page.) Click on the Support tab. Un der the heading Address Type , you will find an IP Address line and a Default Gateway line. These two lines will have IP addresses with the first three octets in common. Use this informatio[...]

d 23[...]

• You can access an d view your net work camera’s images via a web browser by typing “http:// IPAddressofCamera ” in the address bar. • You ca n also use the i ncluded software a pplication t o view, record, and playb ack the network camer a’s images. • T he example illus trated in the pre vious section “Ste p 4: Run the IP Setup Pr[...]