Haier HWM60-20B manuale d’uso

Full Automatic W ashing Machine User ' s manual This manual is for Please read this manual carefully before using. Retain it for future reference. HWM60-20B 0030507862[...]

1/15L 2/18L 3/23L 4/26L 5/28L 6/31L 7/33L 8/35L 9/38L 10/42L Specifications.....................................................................................the 2 nd cover Names of the parts................................................................................................1 Safety precautions ........................................[...]

Liquid detergent inlet 1 Names of the par ts T op lid Detergent box Control panel (Installed by user) Lint filter Filter cover Pulsator Control panel film Cabinet Inner tub Power line Water valve W ater absorption cushion Hanging hole for the drain hose Adjustable foot Adjustable foot stick Fixed foot (3) ack cover Drain hose Cabinet handle Meaning[...]

2 Safety precautions Do not damage the power cord, bend ,extend, twist, bind or alter it by force. Do not press or nip it with weight. If the power cord or the power plug is bad, or the power plug becomes flexible, to avoid risk it is required to have it replaced by the technicians of our special shop or the after-sale service department. Keep the [...]

3 Safety precautions Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.) The handicapped or children without care shall not use the machine. Keep the machine away from dir[...]

4 Installa tion and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Push the lint filter downward to location for lint filter. Install the lint filter Dismantle Install Install the bottom plate After you open the package, please lea[...]

5 How to change the direction of the drain hose 1.Dismantle the ba ck cover of the washing machine. 3.Dismantle the protecting cover of the drain outlet at the other side (method the same as the bushing). Install the bushing as per indicated in Figure 4. 4.Extend the drain hose from the other side. Fix the drain hose onto the base frame with the dr[...]

6 Water tap,suitable Water tap,not suitable It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage. 3. Loosen the screw till the water tap can be accessed. Put the jointer of the water inlet hose on the tap. See to Figure 2. (If the tap diameter[...]

7 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer . 3.Fasten the nut. Swaying it gently to confirm if it's suitable. 1.Close the water tap. 2.Press t[...]

8 Pr eparation bef or e washing Confirm if there's special requirement for the laundries. Clear the pocket. Take out the coins , sand, hairpins etc. Fasten the buttons and zippers. When the pulsator is running , the buttons of the laundries may cause noise. For the sake of discretion, please put the laundries with buttons into other laundries.[...]

9 Liquid whitener inlet Control panel seat See to the manual o f s oftener for the usage and dosage. Do not leave the softener fo r long period after a dding it into the box. O therwise it may be solidified and block the inlet. As the softener is easy t o s olidify , p lease c lean the box frequently .(Y ou shall c lean each t ime you use reserve f[...]

Procedure button Program button Push it to select one or more programs from SOAK WASH RINSE and SPIN Reserve button Water level button Push the button to select washing finishing time between 2-24 hours. Push the POWER ON/OFF POWER ON/OFF button to switch on the power. When the power is on, push it again to switch off the power. Push the button to [...]

1 Push the "POWER ON/OFF " button to switch on the power . POWER ON/OFF 3 Push the PROCEDURE button to select suitable procedure. 11 SPIN WASH RINSE SOAK ST ANDARD GENTLE HEAVY FAST POWER ON/OFF START PAUSE WATER LEVEL RESERVE SU RPLUS (MIN) RES ERVE( HOUR S LAT E R) PROCEDURE PROGRAM JEANS Steps of using the operation buttons and descrip[...]

Even there's no water in the tub, a certain period is required before spin starting. Do not use the soak program for the woolen textiles. Separate the laundries that are not colorfast from other laundries in washing. WA T ER LEVEL When the laundries need only rinsing, spinning after manual washing 12 The pulsator will not rotate unless the wat[...]

• •• RESERVE SURPLUS (MIN) RESERVE(HOURS LATER) 13 Push the "reserve" button to select suitable reserve wash program After switching on the power, th e reserve program is set to off mode automatically . If you need to set the washing procedure to be finished at reserved time, please push the " reserve " b utton to set the [...]

Clean the detergent box and set it on the control panel seat. The method of dismantle : Push it up aslant and gently . The method of install : install it upwards and aslant and push it in . 14 Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the ma[...]

The pulsator pauses during water filling in washing and rinsing. It is to avoid splashing during water filling. 15 Reorder the laundries. Close the top lid. Set the washing machine horizontally and then open and close the top lid once. Trouble-shooting Answ er to question (If there's breakdown, please pull off the pow er plug before checking) [...]

16 User's manual Components of the water inlet hose Bottom plate T apping screws One One One Seven One Full automatic washing machine Packing list Lint filter One Guarantee One Name Quantity[...]