Haier HWM50TLF manuale d’uso

W ashing Machine HWM50TLF HEAVY NORMAL GENTLE QUICK SOAK WASH RINSE SPIN LARGE MEDIUM SMALL WARM COLD DELA Y S TART PROCESS WATER LEVEL TEMP SELECT WASH C YCLE POWER ON OFF TIME REMAINING TIME ON HWM50TLF HOT[...]

IMPOR T ANT SAFETY INSTRUCTIONS Warning - T o reduce the risk of fire, electric shock, or injury when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using the appliance. 2. Use this appliance only for its intended purpose as described in this use and care guide. 3. Use only detergents or sof[...]

16. Do not use this appliance for commercial clothes washing. 17. Do not operate this appliance unless all enclosure panels are properly in place. 18. Do not tamper with controls. 19. T o reduce risk of injury do not allow children to play with the appliance. Close supervision of children is necessary when the appliance is used near children. 20. T[...]

T able Of Contents PAGE 1 4 4 6 1 0 1 2 1 2 1 3 1 3 1 4 1 6 1 6 1 7 1 7 1 7 1 9 1 9 Back cover IMPORTANT SAFETY INSTRUCTIONS.................. OPERATING INSTRUCTIONS................................. Parts and Features................................................ Operations............................................................. Normal Opera[...]

OPERA TING INSTRUCTIONS Parts and Features 12 4 11 11 11 11 12 Adjustable foot seam Lint Filter T op lid Detergent box Inner tub Hight Pulsator Control panel seat Adjustable foot Back faceplate Control panel film Power switch 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 Cabinet HEA VY NORMAL GENTLE QUICK SOAK WASH RINSE SPIN LARGE MEDIUM SMALL WARM CO[...]

Cold Water inlet valve Power cord Hook Handle Back cover Hot Water inlet valve 4 1 2 3 5 6 7 5 1 2 3 5 6 7 4 Drain hose bushing[...]

Po wer Button:(1) Press the button i n to turn the power ON and press the button out to turn the power OFF . Button in=P ower On Button out=power Off Start/Pause Button:(2) Understanding the Control Panel OPERATIONS Delay Start Button:(3) This convenient feature lets you delay the start of the wash cycle between 2 to 24 hours. Confirming a reserved[...]

Quick Cycle Quick washing of the light dirt laundries only 25 minutes Gentle Cycle Wa shing the woollen textile or underwear PROCESS Button:(5) This is to select washing process. Soak will not work in Quick cycles. W a ter level indicator will shut of f if only Spin is selected. WA TER LEVEL Button:(6) W a ter levels may be set at the beginning of [...]

are desired, press the Process Selectbutton to choose. Note: Spin shall begin after some time evenif there is no water in the tub. Do not use soak processfor woolen clothes. Clothesprone to fading should be washed separately . 4. Water Level Selection After W a sh Cycleselection press the Water Level button to select the proper water level for wash[...]

Loading the W a sher: Load each item loosely . Separatethe white and coloredclothes. Separateheavy clothes from light clothes. Carefully check all pockets and cuf fs for small items. They can easily slide in to the tub and may damage the tub. Pre-treat all stains and heavily soiled areas for best results. Do not overloadyour washer . When loading w[...]

Bleach Dispenser: Bleachdispenser is located on front cor ner under the loading door . Pour in recommended amount of bleach into dispenser during the first wash fill. Note: Use only liquid bleach in dispenser . W arning: Be careful not to spill undilutedbleach on the washer cabinet or your clothes. As it is a strong chemical, it may damage some of [...]

Lint Filter The lint filter must be used during washing. It must be cleaned in time after each using. 1. Take of f the lint filter . Pull up the lint filter from the agitator . 2. Remove lint Press the lint screenclip with your thumband index finger , and get the screen downward as shown in figure below . While wet, remove the lint from the screen.[...]

W arning: Always unplug your washer to avoid electric shock beforecleaning. Ignoring this war n ing may result in deathor injur y . Before using cleaning products, always read and follow manufacturer s instructions and war n ings to avoid personal injur y or product damage. Cleaning and Maintenance Use only damp or sudsy cloth for cleaning control [...]

Moving & Vacationing Tur n of f water supply faucet'sand disconnect hoses. Drain water from all hoses. This will preventfrom damaging due to water leakage if the hoses accidentally get ruptured or they become loose. Disconnect electrical plug. Dr y inner wash tub. If moving washer , disconnect drain hose. Tu r n the leveling legs clockwise[...]

W asher does not operate: Check if unit is plugged in. The plug may have come loose. Check if the electrical wall receptacle is of proper voltage. Check if the circuit breaker needsto be reset or if the fuse needs to be replaced. Check if the washer is overloaded: load may need to be re-balanced and clothes may need to be redistributed. Check if th[...]

W asher is making noise: W a sher may need to be reinstalled. (Checkwasher installation section) W a sher load may need to be re-balanced, as the load may be uneven. Coins, loose change, buttons or other heavy objects couldmake noise (read Operating Guide Nor m al Operating Sounds). Squealing Sound: Due to overloaded wash tub. V i bration Noise: Du[...]

INST ALLA TION INSTRUCTIONS TOOLS and Materials Required You w ill need to have the following tools to help you in the installation of your Washer: . Scissors .Phillips Screwdriver .Standard Screwdriver .pliers .Wrench .T ape Measure .Gloves .Level Accessories Supplied Quantity 1. Bottom panel 1 2. Screws for the bottom panel 8 3. Water inlet hose [...]

Unpacking Y our W asher Remove all packing materials. This includesthe foambase and all adhesive tapeholding the washer accessories inside and outside. Open the top lid to remove the styrofoam drum brace.Pull to remove. Note: Save drum brace.Reinstall when moving the washer . Inspect and remove any remains of packing, tape or printed materials befo[...]

Installing Your W a sher: Read though these Instructions Carefully beforeinstallation. 1. Insert a new flat washer into each end of the water inlet hoses. Fi r m ly put the washers in the coupling. Note: You may have to use pliers to tighten the coupling. Do not over tighten because you may cause damage to the valve. 2. Connect the hot and cold wat[...]

Gr ounding Instructions This appliance must be grounded. In the eventof an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounded plug. The plug must be inser ted into an outlet that is properly instal[...]

Specification Model HWM50TLF Rated voltage frequency 230-240V~ 50Hz Rated washing / spinning capacity 5kg (weight of standard dry cloth) W ater level/Water quantity (about) Large/55L Medium/44L Low/35L Max water consumption Injection pressure 0.03MPa-0.78MPa Rated washing power 450W Rated spinning power 300W Weight( ) 37kg Dimension 540x560x940 Abo[...]