Grizzly H7947 manuale d’uso

COPYRIGHT © DECEMBER, 2006 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #JC8622 PRINTED IN TAIWAN MODEL H7947/H7948 INSTRUCTION MANUAL H7947 7 / 16 " 16 GAUGE S TAPLER H7948 1 / 2 " 16 GAUGE S TAPLER[...]

Safety Instructions For Pneumatic Tools 1. KEEP ALL SAFETY DEVICES IN PLACE and in working order. 2. REMOVE ADJUSTING KEYS AND WRENCHES . Form habit of check- ing to see that keys and adjusting wrenches are removed from tool before operation. 3. KEEP WORK AREA CLEAN . Cluttered areas and benches invite accidents. 4. DO NOT USE IN DANGEROUS ENVIRONM[...]

H7947/H7948 16 Gauge Stapler -1 - 10. USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching. 11. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neck - ties, rings, bracelets, or other jew- elry which may get caught in moving parts. Non-slip footwear is recom[...]

H7947/H7948 16 Gauge Stapler -2 - 1. HAND INJURIES: Do not place your hands near the staple point of entry. A staple can deflect and tear through the surface of the workpiece, puncturing your hand or fingers. 2. COMBUSTIBLE GASES: Never connect the stapler to pressur- ized oxygen or other combustible gases as a power source . Only use filtered, lub[...]

H7947/H7948 16 Gauge Stapler -3 - Operating t his stapler can propel objects into the air, causing imme- diate eye damage. To protect your- self, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when oper- ating this equipment. In addition, the intensity of sound made by this sta- pler at discharge can rea[...]

H7947/H7948 16 Gauge Stapler -4 - INTRODUCTION If you have any c omme nts reg ard ing th is man ual, pl ease w rite to u s at the follow ing add ress : Grizzly Industrial, Inc. C/O Technical Documentation Manager P.O. Box 2069 Bellingham, WA 98227-2069 Email: manuals@grizzly.com Mo st im por t antl y , we s tand beh ind our too ls. If you have any [...]

H7947/H7948 16 Gauge Stapler -5 - SETUP Figure 1. Model H7947/H7948 inventory. Unpacki ng Y our Mod el H7947 / H79 48 lef t our ware - hou se in a carefu lly pac ked box. If you dis cover th e s tap ler is da mage d af ter you have si gne d for de liver y , pl ease im med i- ately ca ll Cust omer Ser vice at (570) 546 - 96 63 for advi ce. Save t he[...]

H7947/H7948 16 Gauge Stapler -6 - Compressed Air Sy stem The Mod el H7947 / H79 48 is de sig ned to be opera ted at 70 – 1 1 0 PSI usin g c lean , dr y , re gula ted, co mpre ssed a ir . DO NOT excee d 120 PSI. An in - lin e f ilt er/ lu br ic ator /r eg ula tor un it, de pic ted in Fig ure 2 , c an be in stal led an d sho uld be l oc ated as c l[...]

H7947/H7948 16 Gauge Stapler -7 - T esting Safety Nose Mechanism A safet y mecha nis m (b ump fire) on the nos e o f t he st apl er prote cts a gain st ac ci- den tal fir ing. T his me chan ism is ac tiva ted whe n sta ple s a re loa ded into the mag a- zine. T he s tap ler wi ll n ot f ire whe n t he tri gge r is pulle d unt il the safet y no se i[...]

H7947/H7948 16 Gauge Stapler -8 - OPERATIONS Loadin g St aples Use staples meeting the specifications listed for your stapler on Page 4 of this manual. To load staples in your stapler: 1. DISCONNECT STAPLER FROM THE AIR SUPPLY! Point the stapler away from you and others when connecting the air supply. The stapler can cycle and discharge a staple wh[...]

H7947/H7948 16 Gauge Stapler -9 - Rotati ng Exhau st Co ver The exhaust cover rotates as needed to direct the exhaust away from you. To rotate the exhaust cover: 1. Use the 4mm hex wrench to loosen the exhaust cover cap screw as shown in Figure 5 . Figure 5. Loosening the exhaust cap screw. 2. Rotate the exhaust cover by hand to aim the exhaust por[...]

H7947/H7948 16 Gauge Stapler -10 - Note: Deflection is caused when grain irregularities, knots or foreign objects inside the wood cause the staple to change its path, resulting in the staple puncturing the surface of the workpiece. Besides damaging your workpiece, deflection can cause injury if your free hand is securing the workpiece in the locati[...]

H7947/H7948 16 Gauge Stapler -11 - A jammed staple must be cleared before the stapler is used again. To clear a jammed staple from the dis- charge area: 1. DISCONNECT STAPLER FROM THE AIR SUPPLY! Cleari ng Jammed Staples Figure 10. Unlatching the nose cover. 3. Open the nose cover as shown in Figure 11 . Figure 11. Opening the nose cover. Nose Cove[...]

H7947/H7948 16 Gauge Stapler -12 - Replacin g Pi stons / O - Ri ngs If you nee d to re plac e pi ston p ar ts in your sta pler, yo u c an pur cha se a pis ton rep air kit fro m Gr izzl y: c all 1 - 80 0 -52 3- 4777 . The Pist on Re pair Kit par t n umbe r for Mo del H7947 i s PH79 4 70 81 ; the Pis ton Rep air K it par t n umbe r f or Mo del H794 8[...]

H7947/H7948 16 Gauge Stapler -13 - CLEANING & LUBRICATING Cleanin g Use an au tomot ive grad e solve nt suc h a s Spr ayway C - 60 ® (G2 544 i n t he Griz zly cat alo g) to clea n t he nose asse mbly of the sta pler. Always b e sure t hat t he st aple r is dr y before us ing it a gain. Do not allo w du st, chi ps, or s and into th e air c onne[...]

H7947/H7948 16 Gauge Stapler -14 - H7947 PARTS BREAKDOWN  ?[...]

H7947/H7948 16 Gauge Stapler -15 - H7947 PARTS LIST REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PFH06M FLAT HD CAP SCR M6-1 X 20 41 PH7947041 CONTACT TRIP BLOCK 2 PH7947002 FRONT BRACKET 42 PH7947042 ADJUSTING BLOCK 3 PH7947003 EXHAUST COVER 43 PH7947043 CONTACT ARM 5 PH7947005 EXHAUST FILTER PLATE 44 PSB33M CAP SCREW M5-.8 X 12 6 PSB38M CAP SC[...]

H7947/H7948 16 Gauge Stapler -16 - H7948 PARTS BREAKDOWN                                              ?[...]

H7947/H7948 16 Gauge Stapler -17 - REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PFH06M FLAT HD CAP SCR M6-1 X 20 41 PH7947041 CONTACT TRIP BLOCK 2 PH7947002 FRONT BRACKET 42 PH7947042 ADJUSTING BLOCK 3 PH7947003 EXHAUST COVER 43 PH7947043 CONTACT ARM 5 PH7947005 EXHAUST FILTER PLATE 44 PSB33M CAP SCREW M5-.8 X 12 6 PSB38M CAP SCREW M5-.8 X 25 45[...]

H7947/H7948 16 Gauge Stapler -18 - TROUBLESHOOTING Symptom Possible Cause Solution Air leaking at trig- ger valve area. 1. O-rings in trigger valve hous- ing are damaged. 1. O-rings must be replaced. Air leaking between housing and hose. 1. Loose screws in housing. 2. Damaged O-ring. 3. Loose air fitting. 1. Tighten screws. 2. Replace O-ring. 3. Ti[...]

Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty and any and all warr[...]

[...]

WARRANTY CARD Name _________________________________________________________________ Street _________________________________________________________________ City _______________________ State _________________________ Zip _________ Phone # ____________________ Email ________________________ Invoice # _____ Model # ____________________ Order # ____[...]

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here[...]