Greenheck SE1 manuale d’uso

1 Sidewall Propeller Fans Belt and Direct Drive Exhaust, Supply and Reversible December 2007[...]

2 Greenheck’s sidewall propeller fan line is the ideal choice for factory and warehouse applications where high volumes of air and low pressures are required. From general ventilation to industrial duty, the range of construction and performance capabilities offered in this catalog represent the most comprehensive sidewall propeller fan line in t[...]

3 Model Comparison Direct Drive Fan Selection Three propeller and drive frame combinations are available. Models SE1 and SS1 are designed for smaller size applications where lower volumes and static pressures are found. Models SE2, SS2, SCE3 and SCS3 are designed and constructed for applications with higher volumes and static pressures. Belt Drive [...]

4 Mounting Options Overview wal l wall Mounting Option Description Page Standard W all Mounting Fan can be mounted directly to a wall. 5 Standard Horizontal Mounting Fan can be horizontally mounted to move air up or down. 6 W all Collar The wall collar is an easy way to mount the sidewall propeller fan and its accessories. 7 W all Housing The wall [...]

5 Mounting Fan Dir ectly to W all The split drawing below illustrates the typical ways of mounting fans directly to the wall when a wall housing or collar is not used. For exhaust fans, there is a minimum dimension (M) which must be maintained between the propeller and damper or guard to achieve optimum performance (failure to meet this minimum dim[...]

6 Horizontally mounted fans are available for applications requiring vertical airflow. Typical applications include mounting fans in ductwork or plenums as transfer fans or suspending them from the ceiling in a wall housing for use as recirculation fans. Both belt and direct drive fans can be horizontally mounted. Motors can be mounted on top or on[...]

7 Wall collars offer an alternate method for mounting sidewall propeller fans and the optional accessories shown here. Standard construction is of galvanized steel (painted steel is optional) with heavy gauge mounting flanges and pre-punched mounting holes. Size Wall Collar Damper Guard Weatherhood Motor Side Guard Damper A B** W.O. C D E F Width G[...]

8 Wall housings are the safest, most efficient and sturdy platform for mounting sidewall propeller fans and their optional accessories. Wall housings allow for a wide range of mounting arrangements to meet specific applications. It is constructed of galvanized steel (painted steel optional) with heavy gauge mounting flanges and prepunched mounting [...]

9 The wall housing is designed to reduce installation time and provide maximum installation flexibility. Attached accessories such as backdraft dampers, guards and weatherhoods may mount to either end. As a result a wide variety of configurations are available to accommodate the needs of the system designer. The following information will help dete[...]

10 Filtered supply wall housings are available in seven sizes for fans ranging from size 24 to 54 inches (610 to 1372 mm). They are designed with the draw-thru concept to achieve the highest filter and fan efficiencies. Standard construction is galvanized steel (painted steel optional). Mounting flanges are factory installed for either flush exteri[...]

11 Backdraft Dampers Used alone or in conjunction with the wall housing or wall collar, backdraft dampers are available for exhaust or supply configurations. Backdraft dampers are constructed with galvanized frames, aluminum blades and vinyl blade seals. Actuators are available in 24, 120, 208, 230 or 460 volts. Actuators for 50 cycle voltages are [...]

12 Other Options and Accessories Electrical Disconnect Switches Toggle type and heavy duty disconnect switches are available for positive electrical shut-off and safety in servicing fans. The following switches are available to meet individual electrical requirements and can be factory mounted or shipped loose for field mounting. Wiring from the mo[...]

13 Basics of Fan Selection Direct Drive Model Number Code The model number system is designed to completely identify the fan. The correct code letters must be specified to designate direct drive with exhaust or supply air configuration. The remainder of the model number is determined by the size and performance selected from pages 15 through 21. S [...]

14 Panel/Drive frame - Galvanized steel with one-piece drawn venturi Sizes 8-12; D, G, & E motor speeds - zinc plated heavy welded wire guard/support structure (paint optional). Sizes 12-24; A, B, & C motor speeds - bolted structural steel channels and motor plate. (paint optional). Propeller - Aluminum blades riveted to a steel hub. Motors[...]

15 Performance certified is for Models SE1/SS1 for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness va[...]

16 Panel/Drive frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and motor plate (paint optional). Propeller - Heavy duty, welded and gusseted painted steel. Motors - Heavy duty, permanently lubricated, ball bearing type. Material Gauges Max. Motor Frame Size Approx. Weight (lbs.) Fan Size Fan Panel Drive Frame[...]

17 Direct Drive - Level 2 Model SE2 for exhaust — Model SS2 for supply Performance certified is for Models SE2/SS2 for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal. Performance is [...]

18 Panel/Drive frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and motor plate. (paint optional). Propeller - Heavy duty, cast aluminum. Motors - Heavy duty, permanently lubricated, ball bearing type. Material Gauges Max. Motor Frame Size Approx. Weight (lbs.) Fan Size Fan Panel Drive Frame Prop Hub Prop Blad[...]

19 Direct Drive - Level 3 Model SCE3 for exhaust — Model SCS3 for supply Performance certified is for Models SCE3/SCS3 for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal. Performance[...]

20 Panel/Drive frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and motor plate. (paint optional). Propeller - Heavy duty, cast aluminum. Motors - Heavy duty, permanently lubricated, ball bearing type. Material Gauges Max. Motor Frame Size Approx. Weight (lbs.) Fan Size Fan Panel Drive Frame Prop Hub Prop Blad[...]

21 Direct Drive - Level 3 - Reversible Model SCR3 Reversible for exhaust and supply Performance certified is for Model SCR3 for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal. Performa[...]

22 The model number system is designed to completely identify the fan. The correct code letters must be specified to designate belt drive with exhaust or supply air configuration. The remainder of the model number is determined by the size and performance selected from pages 26 through 38. Belt Drive Model Number Code SB E - 2 L 24 - 7 Sidewall Bel[...]

23 Propeller - Galvanized steel, riveted blades (aluminum optional). Bearings - Stamped steel pillow blocks up to size 36 and cast pillow blocks for size 42 and larger. Panel/Drive frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and one-piece motor/bearing plate (paint optional). Material Gauges Shaft Size Ma[...]

24 Propeller - Reinforced galvanized steel, riveted blades, keyed hub. Bearings - Cast iron pillow blocks with grease fittings. Panel/Drive frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and one-piece motor/bearing plate (paint optional). Material Gauges Shaft Size Max Motor Frame Size Approx. Weight (lbs.) [...]

25 Propellers - SBE-3/SBS-3 - Heavy duty, welded, reinforced, steel blades coated in Permatector™. SBCE-3/SBCS-3 - Heavy duty, cast aluminum blades. All with keyed hubs. Bearings - Cast iron pillow blocks with grease fittings. Panel/Drive Frame - Galvanized steel with one-piece drawn venturi, bolted structural steel channels and one-piece motor/b[...]

26 Using The Performance Table Shown below is a portion of a typical performance table used in this catalog. Performance data shown offers the best selections for each propeller type (“L” or “H”) relative to sound, RPM and static pressure. Consider “L” type propellers first for most applications. Many sidewall applications can be met wi[...]

27 24 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Performance certified is for Models SBE/SBS for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal. Performance is b[...]

28 30 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Performance certified is for Models SBE/SBS for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal. Performance is b[...]

29 36 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 Level 1 Performance Max RPM L - 551 H - 694 Max Motor Frame Size - 56 TS = RPM x 7.854 SBE/SBS-1L36-3 1/3 329 0.25 12.3 9491 6448 361 [...]

30 42 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 Level 1 Performance Max RPM L - 424 H - 533 Max Motor Frame Size - 145T TS = RPM x 10.995 SBE/SBS-1L42-3 1/3 250 0.24 9.4 11651 275 0.[...]

31 48 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 Level 1 Performance Max RPM L - 355 H - 429 Max Motor Frame Size - 145T TS = RPM x 12.566 SBE/SBS-1L48-5 1/2 231 0.31 8.6 14885 266 0.[...]

32 54 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 Level 1 Performance Max RPM L - 343 H - 377 Max Motor Frame Size - 145T TS = RPM x 13.135 SBE/SBS-1L54-7 3/4 224 0.51 10.7 19676 12031[...]

33 60 Belt Drive SBE/SBS Model SBE for exhaust — Model SBS for supply Performance certified is for Models SBE/SBS for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal. Performance is b[...]

34 24-30 Belt Drive SBCE/SBCS Cast Aluminum Model SBCE for exhaust — Model SBCS for supply Performance certified is for Models SBCE/SBCS for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is no[...]

35 36-42 Belt Drive SBCE/SBCS Cast Aluminum Model SBCE for exhaust — Model SBCS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 36 Performance Max RPM L - 1183 H - 1480 Max Motor Frame Size - 184T TS = RPM x 9.424 SBCE/SBCS-3L36-7 3/4 516 0.[...]

36 48-54 Belt Drive SBCE/SBCS Cast Aluminum Model SBCE for exhaust — Model SBCS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 48 Performance Max RPM L - 908 H - 1182 Max Motor Frame Size - 215T TS = RPM x 12.566 SBCE/SBCS-3L48-15 1 1 ⁄ 2[...]

37 60-72 Belt Drive SBCE/SBCS Cast Aluminum Model SBCE for exhaust — Model SBCS for supply Model Number Motor HP Fan RPM Max BHP *Sones CFM / Static Pressur e in Inches WG 0.00 0.10 0.125 0.15 0.20 0.25 0.30 0.375 0.50 0.625 0.75 1.00 60 Performance Max RPM L - 620 H - 775 Max Motor Frame Size - 254T TS = RPM x 15.691 SBCE/SBCS-3L60-20 2 310 1.51[...]

38 24-72 Belt Drive SBCR Reversible (Exhaust and Supply) Performance certified is for Model SBCR for installation type A: free inlet, free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). * Speed (RPM) shown is nominal. Performance is based on actual spee[...]

39 Belt Drive Specifications Belt Drive Belt driven, axial type sidewall fans shall be provided as follows: Propellers shall be constructed with fabricated steel, fabricated aluminum, or cast aluminum blades and hubs. Propellers shall be securely attached to fan shafts. All propellers shall be statically and dynamically balanced to AMCA standard 20[...]

Greenheck warrants this equipment to be free from defects in material and workmanship for a period of one year from the purchase date. Any units or parts which prove defective during the warranty period will be replaced at our option when returned to our factory, transportation prepaid. Motors are warranted by the motor manufacturer for a period of[...]