Gigabyte GA-J1800N-D2H (rev. 1.0) manuale d’uso

GA-J1800N-D2H User's Manual Rev . 1001 12 M E - J1 8 0 D 2 H -1 0 01 R[...]

Copyright © 2014 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specications and features in this manual may be made by GIGABYTE wit[...]

T able of Contents GA - J 180 0N - D2H Mothe rboar d Layout ........................................................................... 4 GA - J 180 0N - D2H Mothe rboar d Bloc k Diagr am ............................................................... 5 Chapter 1 Hardware Inst allation ...............................................................[...]

GA- J 1 800N - D2H Motherboard Lay out Box Contents 5 GA-J1800N-D2H motherboard 5 Motherboard driver disk 5 T wo SA T A cables 5 User's Manual 5 I/O Shield The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice. KB_MS CPU_F AN AT X[...]

GA- J 1 80 0N - D2H Motherboard Block Diagram Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications." PS/2 KB/Mouse Single BIOS DDR3L 1333 MHz Dual Channel Memory LPC Bus PCIe CLK (100 MHz) x1 LAN RJ45 Realtek ® GbE LAN PCI Express Bus 2 SA T A 3Gb/s Line Out (Front Speaker Out) MIC (Center[...]

- 6 - Chapter 1 Hardware Installation 1- 1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prior to installation, make sure the ch[...]

- 7 - 1- 2 P roductSpe cications CPU  Built in with an Intel ® Dual-Core Celeron ® J1800 SoC (2.41 GHz) * Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components.  1 MB Cache Memory  2 x 1.35V DDR3L DIMM sockets supporting up to 8 GB of system memory * If only one DDR3L memory module [...]

- 8 - Back Panel Connectors  1 x PS/2 keyboard port  1 x PS/2 mouse port  1 x D-Sub port  1 x HDMI port  1 x USB 3.0/2.0 port  4 x USB 2.0/1.1 ports  1 x RJ-45 port  3 x audio jacks (Line In, Line Out, Mic In) I/O Controller  iTE ® I/O Controller Chip Hardware Monitor  System voltage detection  CPU/System temperatu[...]

- 9 - 1-3 Installing the Me mor y Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory . It is recommended that memory of the same capacity , brand, speed, and chips be used. • Always turn off the computer and unplug the power cord from the power outlet before installing the [...]

- 10 - T o congure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver . • Whenremovingthecableconnectedtoabackpanel connector,rst removethecablefromyour device [...]

- 1 1 - 1-6 Internal Connec tors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer . Unplug the power cord from the power outlet to prevent damage to the devices[...]

- 12 - A TX: Pin No. Denition Pin No. Denition 1 3.3V 13 3.3V 2 3.3V 14 -12V 3 GND 15 GND 4 +5V 16 PS_ON (soft On/Off) 5 GND 17 GND 6 +5V 18 GND 7 GND 19 GND 8 Power Good 20 -5V 9 5VSB (stand by +5V) 21 +5V 10 +12V 22 +5V 11 +12V (Only for 2x12-pin A TX) 23 +5V (Only for 2x12-pin A TX) 12 3.3V (Only for 2x12-pin A TX) 24 GND (Only for 2x12-pi[...]

- 13 - Pin No. Denition 1 GND 2 TXP 3 TXN 4 GND 5 RXN 6 RXP 7 GND 7) SA T A2 0/1 (SA T A 3Gb/s Connectors) The SA T A connectors conform to SA T A 3Gb/s standard and are compatible with SA T A 1.5Gb/s standard. Each SA T A connector supports a single SA T A device. 5) COM (Serial Port Header) The COM header can provide one serial port via an opt[...]

- 14 - 8) F_P ANEL (Front Panel Header) Connect the power switch, reset switch, and system status indicator on the chassis to this header according to the pin assignments below . Note the positive and negative pins before connecting the cables. 9) F_AUDIO (Front Panel Audio Header)  Thefrontpanel audio headersupports IntelHi[...]

- 15 - 10) F_USB (USB 2.0/1.1 Header)  The header conforms to USB 2.0/1.1 specication. EachUSB header can provide two USB ports viaan optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer . Pin No. Denition Pin No. Denition 1 Power (5V) 6 USB DY+[...]

- 16 - 13) CLR_CMOS (Clear CMOS Jumper)  Use this jumper to clear the BIOS conguration and reset the CMOS values to factory defaults.T o clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds. • Always turn off your computer and unplug the po[...]

- 17 - BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. Its major functions include conducting the Power-On Self-T est (POST) during system startup, saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that allows theusertomodifybasic[...]

- 18 - 2- 2 Main Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu. Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom line of the Main Menu. Submenu Help While in a s[...]

- 19 - 2-3 Advanced ` Intel(R) Smart Connect T echnology & ISCT Support Enables or disables Intel ® Smart Connect T echnology. (Default: Disabled) ` SuperIOConguration  This section provides information on the super I/O chip and allows you to congure the serial port and paral[...]

- 20 - & ErP Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled) Note: When this item is set to Enabled , the following functions will become unavailable: PME event wake up, power on by mouse, power on by keyboard, and wake on LAN. & Case Open Displays the detection status of the chassis intr[...]

- 21 - ` PPMConguration & EIST Enables or disables Enhanced Intel ® Speed Step T echnology (EIST). Depending on CPU loading, Intel ® EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease average power consumption and heat production. (Default: Enabled) & CPU C state Report Enables or[...]

- 22 - ` NetworkStackConguration & Network Stack Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server . (Default: Disabled) & Ipv4 PXE Support  EnablesordisablesIPv4PXESupport.Thisitemiscongurableonlyw[...]

- 23 - & Video Allows you to select whether to enable the UEFI or legacy option ROM for the graphics controller.  Do not launch Disables option ROM.  UEFI only Enables UEFI option ROM only .  Legacy only Enables legacy option ROM only .  Legacyrst   EnableslegacyoptionROMrst.(Default)  UEFIr[...]

- 24 - 2- 4 Chipset & Realtek LAN Controller Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled . ` North Bridge This section provides information on the installed memory size and memory/onboard graphics-related con?[...]

- 25 - & Restore AC Power Loss Determines the state of the system after the return of power from an AC power loss.  Power Off The system stays off upon the return of the AC power . (Default)  Power On The system is turned on upon the return of the AC power .  Last State The system returns to its last known awake state upon the return o[...]

- 26 - ` Secure Boot menu & System Mode Displays the current system mode. & Secure Boot Displays the current secure boot state. & Secure Boot Enables or disables the secure boot function. Secure Boot requires all the applications that are running duringthe booting processto be pre-signedwith valid digitalce[...]

- 27 - & VGA Support Allows you to select which type of operating system to boot.  Auto Enables legacy option ROM only .  EFI Driver Enables EFI option ROM. (Default)  Thisitemiscongurableonlywhen Fast Boot is set to Enabled . & USB Support  Disabled All USB devices are disabled before the OS boot process co[...]

- 28 - & Save Changes and Reset Press <Enter> on this item and select Ye s . This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc> to return to the BIOS Setup Main Menu. & Discard Changes and Reset Press <Enter> on this item and select Ye s . This exits the BIOS Setup without saving [...]

- 29 - Chapter 3 Appendix • Before installing the drivers, rst install the operating system. (The following instructions use Windows 8 as the example operating system.) • After installing the operating system, insert the motherboard driver disk into your optical drive. Click on the message "T ap to[...]

- 30 - Regulator y Statement s Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted. We believe that the information contained herein was accurate in all respects at the time of pr[...]

- 31 - FCC Notice (U.S.A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency [...]

- 32 - Conta ct Us GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bao Chiang Road, Hsin-Tien Dist., New T aipei City 231,T aiwan TEL: +886-2-8912-4000, F AX: +886-2-8912-4005 T ech. and Non-T ech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www .gigabyte.com WEB address (Chinese): http://www .gigabyte.tw Y [...]