Frigidaire 241666500 manuale d’uso

P/N 241666500 (0905) READ AND SA VE THESE INSTR UCTIONS U se & C ar e M anual B ev erage Center II W elcome 2 Safety Instructions 3 Installation 4-5 Door Rever sal 6 Features At A Glance 7 T emperature Contr ols 7 First Steps 8-12 Helpful Hints 13 Bevera g e Center Extra Features Optional Ice Service 14 Energy Sa ving Tips 15 V acation and Mo v[...]

2 WELCOME & CONGRA TULA TIONS Congratulations on your purchase of a new beverage center! We here at Electrolux Home Products, Inc. are very proud of our product and we are completely committed to providing you with the best service possible. Y our satisfaction is our #1 prior ity . Please read this Use & Care Manual v e ry carefully . It co[...]

3 IMPOR T ANT SAFETY INSTRUCTIONS FOR Y OUR SAFETY • Do not store or use gasoline, or other flammable liquids in the vicinity of this or any other appliance. Read product labels for warnings regarding flammability and other hazards. • Do not operate the beverage center in the presense of explosive fumes. • Avoid contact with any moving parts [...]

4 INST ALLA TION This Use & Care Manual provides specific operating instructions for your model. Use this beverage center only as instructed in this Use & Care Manual. Before starting this bevera ge center , f ollow these impor tant first steps. LOCA TION • Choose a place that is near a grounded electrical outlet. Do Not use an extension [...]

5 INST ALLA TION - CONNECTING ICE MAKER TO WA TER SUPPL Y Before Installing The W ater Supply Line, Y ou Will Need • Basic T ools: adjustable wrench, flat-blade scre wdriver , and Phillips TM screwdriver • Access to a household cold water line with water pressure between 30 and 100 psi. • A water supply line made of ¼ inch (6.4 mm) OD , copp[...]

6 DOOR REMO V AL / REVERSAL INSTR UCTIONS Door Stop Screw Center Hinge Screw Bottom Hinge Screw To p Hinge Screw 1. Remove toe grille. 2. Remove top hinge with 3/8” hex driver and lift freezer door off of center hinge pin. Set door aside. 3. Unscrew center hinge pin using adjustable wrench and save for reassembly . Ensure plastic washer sta ys on[...]

7 FEA TURES AT A GLANCE Features may vary according to model TEMPERA TURE CONTROLS COOL DO WN PERIOD T o ensure safe f ood storage, allow the be verage center to operate with the doors closed for at least 12 hours before loading it with food and beverages. BEVERA GE CENTER CONTROLS T emperature Control This rotary control is the primary control for[...]

8 FIRST STEPS This Use and Care Manual provides specific assemb ly , operating and maintenance instructions for your model. Use the beverage center only as instructed in this Use and Care Manual. Before starting the beverage center , follow these important first steps. PA R T S Y our bev erage center comes with a box that contains all the required [...]

9 FIRST STEPS (continued) REGULA T OR INST ALLA TION • Check to ensure plastic washer is inside the hex nut. NOTE NOTE NOTE NOTE NOTE If the plastic washer is missing, please call Electrolux Consumer Services at 1-800-944-9044 for assistance . • F asten the CO 2 regulator (10) to the CO 2 canister (16). Place the regulator to the right of the t[...]

10 BRAIDED HOSE T O COUPLER CONNECTION • Slip one Worm Clamp (14) onto the other end of the braided hose (13). • Push the other end of the braided hose (13) onto the keg coupler (11) until seated against hex head. • Secure the hose (13) to the keg coupler (11) using the remaining worm clamp (14). Use a flat tip screwdriver to tightly secure t[...]

11 FIRST STEPS (continued) DELIVER Y HOSE PRESSURIZA TION • Open the CO 2 canister valve all the way by turning counterclockwise until it stops. This valv e seals at both the fully open and fully closed positions. F ailure to completely open or close the valve could result in premature loss of CO 2 pressure. • Open the regulator shut-off valve [...]

12 FIRST STEPS (continued) OPERA TING Y OUR BEVERA GE CENTER • Make sure that the beverage center is plugged in properly to a 115V , 60Hz AC only electrical outlet. Refer to Electrical Information on page 3. • Make sure that the drip tray and sump are secured under the faucet. • Start with a clean beverage glass that has been wetted in cold w[...]

13 HELPFUL HINTS BEVERA GE COOLER EXTRA FEA TURES OPTIONAL CASTER KIT If you’ d like to make y our bev erage center so it can be rolled from room to room, there is an optional caster kit available from your authorized F r igidaire dealer or ser vice center . Just ask for part number 5304451343 - Caster , Rail and Hardware Kit, which includes 2 fi[...]

14 OPTIONAL ICE SER VICE If your bev er age center has an automatic ice maker , it will provide a sufficient supply of ice for normal use. Howe v er , during the initial star tup of your be v erage center, no ice will be produced during the first 24 hours of operation. Automatic ice makers are also optional accessories that may be installed in most[...]

15 ENERGY SA VING TIPS • Install the beverage center in the coolest part of the room, out of direct sunlight and away from heating ducts or registers. Do not place the beverage center next to heat-producing appliances such as a range , oven, or dishw asher. • Do not overcrowd the beverage center or block cold air vents. Doing so causes the beve[...]

16 NORMAL OPERA TING SOUNDS & SIGHTS UNDERST ANDING THE SOUNDS YOU MA Y HEAR Y our new high-efficiency bev e rage center ma y make unfamiliar sounds . These are all nor mal sounds and soon will become familiar to y ou. They also indicate y our b e verage center is operating as designed. Hard surfaces, such as vinyl or wood floors, walls, and ki[...]

17 CARE & CLEANING Keep your beverage center cl ean to prevent odor build-up. Wipe up any spills immediately and clean both sections at least twice a year . Never use any type of scouring pads, brushes , abrasive cleaners or strong alkaline solutions on any surf ace. Do not wash any remo va ble par ts in a dishwasher . Always unplug the electri[...]

18 CARE & CLEANING (continued) PR OPER CLEANING OF BEVERA GE CENTER DISPENSING SYSTEM Y our bev erage center’ s bever age dispensing system needs regular cleaning and sterilization in order to continue serving draft beer with its pure bre wer y flav or . It is recommended that the delivery lines be cleaned weekly and the entire delivery syste[...]

19 WARRANTY INFORMA TION BEVERAGE CENT ER WARRANTY Your bevera ge center is protected by thi s warr anty WARR ANTY PERIOD T HROUGH OUR AUTHORIZED SERVICERS, WE WILL: THE CONSUM ER WILL BE RESPONSI BLE FOR: FULL ONE-YEAR WARR ANTY One ye ar from origina l purchase date. Pay all cost s for r epair ing or r epl acing a ny par ts of this appli ance whi[...]

20 TROUBLESHOO TING GUIDE TROUBLESHOOTI N G GUIDE Befor e call ing f or ser vice, revi ew thi s li st. I t may save you t i me and expense . Th is l ist in cludes common occurr ences t hat are not th e r esult of def ecti ve workmanshi p or mater ial s in t his appl iance. PROBLEM CAUSE CORRECTION BEVERAGE CENTER OPERATION Bevera ge cent er does no[...]

21 TROUBLESHOO TING GUIDE SOUND AND NOI SE (CON T.) Vibrating or ra tt ling noise. • Bev erage ce nter i s touching the wall. • Move bever age cent er s li ghtl y away f r om th e wall . Snappi ng noi se • Temperat ure c ontr ol t urnin g bever age cent er on and o ff. • T his is no rma l WATER / MOI STURE / FR OST IN SIDE BEVERAGE CENTER M[...]

22 BEFORE YOU CALL A TTENTION T o Pr operly Install Y our Be verag e Center See “Installation” Section On P ages 4-5 OR T o Reverse The Doors See “Door Remov al & Rever sal” Section On P age 6 Common Occurr ences Before callin g for service, revi ew this li st. It may save you tim e and expense . This list incl udes comm on occ urrences[...]