Finlux 32F702 manuale d’uso

32in Passive 3D TV 32 F702 Owner’ s manual happy Finnish[...]

- 1 - Contents Package Contents .................................................. 2 Preparation ............................................................. 3 Safety Precautions ................................................. 3 3D Mode and 3D Images........................................ 4 CAUTION ..............................................[...]

- 2 - Package Contents TV Remote Control LCD TV Instruction Book Batteries: 2 X AAA Passive 3D glasses: 4x Note: Y ou should check the contents after opening your purchase and make sure that every item is included. Note: The HDMI connection between PC and TV may cause radio interference in which case it is recommended to use VGA(DSUB-15) connection[...]

- 3 - Introduction Thank you for choosing this product. This manual will guide you through the proper operation of your TV . Before operating the TV , please read this manual thoroughly . Please keep this manual in a safe place for future reference. This device is intended to receive and display TV programmes. The dif ferent connection options make[...]

- 4 - • Use only the supplied 3D glasses. • If you experience screen ickering when watching 3D images in poor light conditions, you should turn the lamp off or dim the light. • When using headphones, you should adjust the volume so as to avoid excessive levels, since hearing damage may result. CAUTION • Please read these safety instructi[...]

- 5 - material on the cloth, make sure to shake off any dust before using it. • Do not scratch the surface of the Liquid crystal shutters with a sharp tool and do not clean it using chemicals. This may degrade the screen quality . • Do not apply force to the liquid crystal. • Do not drop or bend the product. • If the receiving range is out [...]

- 6 - Connection to a T elevision Distribution System (Cable TV etc.) from T uner Devices connected to the protective earthing of the building installation through the mains connection or through other apparatus with a connection to protective earthing-and to a television distribution system using a coaxial cable, may in some circumstances create a[...]

- 7 - Remote Control Buttons TV 1. Standby / On 2. Channel list 3. V olume up-down 4. Menu on/off 5. OK / Conrm 6. Return / Back 7. No function 8. No function 9. No function 10. Coloured buttons (Red, Green, Y ellow, Blue) 1 1. Mono-Stereo Dual I-II / Current language 12. Fast rewind (in media browser mode) 13. T imeshift recording / Pause (in m[...]

- 8 - TV and Operating Buttons FRONT and REAR VIEW Control switch VIEW Control Switch 1. Standby button 2. TV/A V button 3. Programme Up/Down buttons 4. V olume Up/Down buttons Note: Press “ ” / “ ” buttons at the same time to view main menu. Viewing the Connections - Back Connectors D I H M 1 SPDIF Coax.OUT D I H M 2 1. HDMI 2: HDMI Input [...]

- 9 - 5. VGA Input is for connecting a personal computer to the TV set. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC. 6. SPDIF Out outputs audio signals of the currently watched source. Use an SPDIF cable to trasfer audio signals to a device that has SPDIF input. Viewing the Connections - Side Connectors 1. The C[...]

- 10 - Using USB Media USB Connection • Y ou can connect a USB hard disk drive or USB memory stick to your TV by using the USB inputs of the TV . This feature allows you to play les stored in a USB drive or record programmes. • 2.5” and 3.5” inch (hdd with external power supply) external hard disk drives are supported. • T o record a p[...]

- 1 1 - • Multipartiton suppo rt is available. Maximum two different partitions are supported. If the disk have more than two partitions, crash may occur . First partition of the usb disk is used for PVR ready features. It also must be formatted as primary partition to be used for PVR ready features. • Some stream packets may not be recorded be[...]

- 12 - Input Selection Once you have connected external systems to your TV , you can switch to different input sources. Press “ ” button on your remote control consecutively for directly changing sources. Note: YPbPr mode can be used only when you connect a device that has a YPbPr output through the PC input with YPbPr to PC cable (not supplied[...]

- 13 - • Functions of the menu system are described in the following sections. V olume Setting • Press V+ button to increase the volume. Press V- button to decrease the volume. A volume level scale (slider) will be displayed on the screen. Programme Selection (Previous or Next Programme) • Press P- button to select the previous programme. •[...]

- 14 - • After all the available stations are stored, Channel List will be displayed on the screen. If you like the sort channels, according to the LCN, please select “Y es” and than press “OK”. • Press OK button to quit channel list and watch TV Viewing Electronic Programme Guide (EPG) Y ou can view the electronic programme guide (EPG)[...]

- 15 - Green button (Next Time Slice): Displays the programmes of the next time slice. Y ellow button (P r ev D ay ) : Displays the programmes of previous day . Blue button (Next day): Displays the programmes of the next day . “ ” button (Filter): Views ltering options. Numeric buttons (Jump) : Jumps to the preferred channel directly via num[...]

- 16 - Quick Menu Quick Settings menu allows you to access some options quickly . This menu includes Power Save Mode, 3D Mode, Picture Mode, Equalizer Settings, Favourites and Sleep T imer options. Press Q.MENU button on the remote control to view quick menu. See the following chapters for the details of the listed features. Installation Press MENU[...]

- 17 - Digital Manual Search In manual channel scan, the number of the multiplex or frequency are entered manually and only that multiplex or frequency are searched for the channels. After selecting search type as Digital , you can enter the multiplex or frequency number using the numeric buttons and press OK button to search. Analogue Manual Searc[...]

- 18 - Renaming a Channel • Select the channel that you want to rename and select Edit Name option. Press OK button to continue. • Pressing “ ” or “ ” button moves to the previous/ next character . Pressing “ ” or “ ” button toggles the current character , i.e., ‘b’ character becomes ‘a’ by “ ” and ‘c’ by “ ”[...]

- 19 - On-Screen Information Y ou can press “ ”button to display on-screen information. Details of the station and current programme will be displayed on the information banner . The information banner gives information on the channel selected and the programmes on it. The name of the channel is displayed, along with its channel list number . H[...]

- 20 - Y ellow : Opens subtitle time correction menu. Ret/Back: Back to previous menu. Press OK to conm Press BLUE button for clear Press SWAP (Exit) button to switch back to previous menu. Viewing Photos via USB When you select Photos from the main options, available image les will be ltered and listed on this screen. Jump (Numeric button[...]

- 21 - 0..9 (Numeric buttons): The TV will jump to the le starting with the letter you input via the numeric buttons on your remote control. Play This (OK button) : Plays the selected le. Previous/Next (Left/Right buttons) : Jumps to previous or next le to play . Y ellow Button: Change viewing style BLUE: Changes media options. Note: If th[...]

- 22 - • Connect a 3D compatible player via an HDMI cable and play the 3D content. Refer to the manual of the player for the settings of the player . • Press SOURCE button and select the connected input. • Y ou should select suitable 3D Mode before viewing. • T o view 3D contents or programmes in 3D mode (3-Dimensional) you must wear the su[...]

- 23 - Instant Recording IMPORT ANT : T o record a programme, you should rst connect a USB disk to your TV while the TV is switched off. Y ou should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available. • Press (RECORD) button to start recording an event instantly while watching a programme. The[...]

- 24 - Changing Image Size: Picture Formats • Y ou can change the aspect ratio (image size) of the TV for viewing the picture in dif ferent zoom modes. • Press the “ ”button repeatedly to change the image size. Available zoom modes are listed below . Auto When AUTO is selected, the aspect ratio of the screen is adjusted by the information p[...]

- 25 - Conguring Picture Settings Y ou can use different picture settings in detail. Press MENU button and select the Picture icon by using “ ” or “ ” button. Press OK button to view Picture Settings menu. Operating Picture Settings Menu Items • Press “ ” or “ ” button to highlight a menu item. • Use “ ” or “ ” button[...]

- 26 - H Position : This item shifts the image horizontally to right hand side or left hand side of the screen. V Position : This item shifts the image ver tically towards the top or bottom of the screen. Dot Clock : Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or pa[...]

- 27 - Operating Settings Menu Items • Press “ ” or “ ” button to highlight a menu item. • Press OK button to select an item. • Press MENU button to exit. Settings Menu Items Conditional Access : Controls conditional access modules when available. Language : Congures language settings. Parental : Congures parental settings. Time[...]

- 28 - Current (*) (*) These settings can be changed if only the broadcaster supports. Otherwise, settings will not be available to be changed. • Audio : Changes the audio language for the current channel. • Subtitle : Sets the subtitle language for the current channel. Note : If the Country option is set to Denmark, Sweden, Norway or Finland, [...]

- 29 - Setting Sleep Timer This setting is used for setting the TV to turn off after a certain time. • Highlight Sleep Timer by using “ ” or “ ” button. • Use “ ” or “ ” button to set. The timer can be programmed between Off and 2.00 hours (120 minutes) in steps of 30 minutes. Setting Programme Timers Y ou can set programme time[...]

- 30 - T o view the details about the USB disk, highlight Hard Disk Info by using “ ” or “ ” key and press OK . USB disk information will be displayed: Conguring Date/Time Settings Select Date/Time in the Settings menu to congure Date/T ime settings. Press OK button. • Use “ ” or “ ” buttons to highlight Date / T ime. Date,T[...]

- 31 - Menu Timeout : Changes timeout duration for menu screens. Scan Encrypted Channels : When this setting is on, search process will locate the encrypted channels as well. If it is set as Off , encrypted channels will not be located in automatic search or manual search. Blue Background (Optional) : Activates or deactivates blue background system[...]

- 32 - Coloured Buttons (RED/GREEN/YELLOW/ BLUE) Y our TV supports both F ASTEXT and TOP text systems. When these systems are available, the pages are divided into groups or topics. When F ASTEXT system is available, sections in a teletext page will become colour-coded and can be selected by pressing the coloured buttons. Press a coloured button th[...]

- 33 - Appendix A: PC Input T ypical Display Modes The display has a maximum resolution of 1920 x 1200. The following table is an illustration of some of the typical video display modes. Y our TV may not support different resolutions. Supported resolution modes are listed below . If you switch your PC to an unsupported mode, a warning OSD will appe[...]

- 34 - Appendix C: Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI to HDMI cables (not supplied), you can refer to the following resolution information. Index Resolution Frequency 1 640x400 70Hz 2 640x480 60Hz-66Hz-72Hz -75Hz 3 800x600 56Hz-60Hz-70Hz- 72Hz -75Hz 4 832x624 75 Hz 5 1024x768 60Hz-66Hz-70Hz- 72H[...]

- 35 - Appendix E : Supported File Formats for USB Mode Media File Extension Format Remarks Video Audio (Maximum resolution/Bit rate etc.) Movie .mpg, .mpeg MPEG1, 2 MPEG Layer 1/2/3 MAX 1920x1080 @ 30P 20Mbit/sec .dat MPEG1, 2 MPEG2 .vob MPEG2 .avi MPEG2 PCM/MP3 MAX 1920x1080 @ 30P 20Mbit/sec Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-b[...]

- 36 - Appendix F: Supported 3D Content Resolutions HDMI MBV MBP DTV AT V OTHER 1080p@24 FP Supported Not Supported Not Supported Not Supported Not Supported Not Supported 720p@50 FP Supported Not Supported Not Supported Not Supported Not Supported Not Supported 720p@60 FP Supported Not Supported Not Supported Not Supported Not Supported Not Suppor[...]

- 37 - 3D Viewing Information Y our 3D Viewing experience can be affected by the location of the viewer and the TV set. T o maximise your enjoyment we recommend you follow the guidelines below: Viewing Distance Size (inch) 22 26 32 37 40 Viewing distance (m) 1,30 1,50 1,90 2,20 2,40 Size (inch) 42 46 47 55 Viewing distance (m) 2,50 2,75 2,80 3,25 H[...]

- 38 - Specications TV BROADCASTING P AL/SECAM B/G D/K K’ I/I’ L/L ’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND NUMBER OF PRESET CHANNELS 1000 CHANNEL INDICA TOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERA TING VOL T AGE 220-240V AC, 50 Hz AUDIO German + Nicam Stereo AUDIO OUTPUT POWER (W RMS. ) (10% THD) 2 [...]

- 39 - Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply . MAINS (AC) OPERA TION The wires in the mains lead are coloured in accordance with the following code : IMPORT ANT As the colours of the wires in the mains lead of this appliance may not correspond with t[...]

- 40 - T o Program Y our SKY Remote For Y our TV 1. Make sure your SKY box is connected to your TV 2. T urn your TV and SKY box on 3. Press TV on your SKY remote control handset 4. Hold down SELECT and the RED button together for about two seconds, until the red light on the SKY remote blinks twice. 5. Key in 065 on your SKY remote. The light on th[...]

- 41 - T o Enable 3D Playback from a SKY box* Make sure your SKY box is connected to your TV Select a SKY 3D channel Press the ‘Menu’ button on your TV remote control Select ‘Picture’ Select ‘3D Menu’ Change the setting to 3D side by side Once setup, 3D channels will now be available in 3D. Note: Y ou will need to de-select this mode wh[...]

www .finluxdirect.com Customer helpline: 0845 459 5282 5 0 2 3 4 6 5 3[...]