Warning: mysql_fetch_array() expects parameter 1 to be resource, boolean given in /home/newdedyk/domains/bkmanuals.com/public_html/includes/pages/manual_inc.php on line 26
Epson SureColor SC-T3000 manuale d’uso - BKManuals

Epson SureColor SC-T3000 manuale d’uso

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163

Vai alla pagina of

Un buon manuale d’uso

Le regole impongono al rivenditore l'obbligo di fornire all'acquirente, insieme alle merci, il manuale d’uso Epson SureColor SC-T3000. La mancanza del manuale d’uso o le informazioni errate fornite al consumatore sono la base di una denuncia in caso di inosservanza del dispositivo con il contratto. Secondo la legge, l’inclusione del manuale d’uso in una forma diversa da quella cartacea è permessa, che viene spesso utilizzato recentemente, includendo una forma grafica o elettronica Epson SureColor SC-T3000 o video didattici per gli utenti. La condizione è il suo carattere leggibile e comprensibile.

Che cosa è il manuale d’uso?

La parola deriva dal latino "instructio", cioè organizzare. Così, il manuale d’uso Epson SureColor SC-T3000 descrive le fasi del procedimento. Lo scopo del manuale d’uso è istruire, facilitare lo avviamento, l'uso di attrezzature o l’esecuzione di determinate azioni. Il manuale è una raccolta di informazioni sull'oggetto/servizio, un suggerimento.

Purtroppo, pochi utenti prendono il tempo di leggere il manuale d’uso, e un buono manuale non solo permette di conoscere una serie di funzionalità aggiuntive del dispositivo acquistato, ma anche evitare la maggioranza dei guasti.

Quindi cosa dovrebbe contenere il manuale perfetto?

Innanzitutto, il manuale d’uso Epson SureColor SC-T3000 dovrebbe contenere:
- informazioni sui dati tecnici del dispositivo Epson SureColor SC-T3000
- nome del fabbricante e anno di fabbricazione Epson SureColor SC-T3000
- istruzioni per l'uso, la regolazione e la manutenzione delle attrezzature Epson SureColor SC-T3000
- segnaletica di sicurezza e certificati che confermano la conformità con le norme pertinenti

Perché non leggiamo i manuali d’uso?

Generalmente questo è dovuto alla mancanza di tempo e certezza per quanto riguarda la funzionalità specifica delle attrezzature acquistate. Purtroppo, la connessione e l’avvio Epson SureColor SC-T3000 non sono sufficienti. Questo manuale contiene una serie di linee guida per funzionalità specifiche, la sicurezza, metodi di manutenzione (anche i mezzi che dovrebbero essere usati), eventuali difetti Epson SureColor SC-T3000 e modi per risolvere i problemi più comuni durante l'uso. Infine, il manuale contiene le coordinate del servizio Epson in assenza dell'efficacia delle soluzioni proposte. Attualmente, i manuali d’uso sotto forma di animazioni interessanti e video didattici che sono migliori che la brochure suscitano un interesse considerevole. Questo tipo di manuale permette all'utente di visualizzare tutto il video didattico senza saltare le specifiche e complicate descrizioni tecniche Epson SureColor SC-T3000, come nel caso della versione cartacea.

Perché leggere il manuale d’uso?

Prima di tutto, contiene la risposta sulla struttura, le possibilità del dispositivo Epson SureColor SC-T3000, l'uso di vari accessori ed una serie di informazioni per sfruttare totalmente tutte le caratteristiche e servizi.

Dopo l'acquisto di successo di attrezzature/dispositivo, prendere un momento per familiarizzare con tutte le parti del manuale d'uso Epson SureColor SC-T3000. Attualmente, sono preparati con cura e tradotti per essere comprensibili non solo per gli utenti, ma per svolgere la loro funzione di base di informazioni e di aiuto.

Sommario del manuale d’uso

  • Pagina 1

    User's Guide NPD4669-00 EN[...]

  • Pagina 2

    Copyrights and Trademarks No part of this publication may be reproduced, stored in a retr ieval system, or t ransmitted in an y form or by any means, electr onic, mechanical, photocopying, recording, or otherwise, with out the prior written permission of Seiko Epson Cor poratio n. The in formatio n conta in ed herein is designed only for use with t[...]

  • Pagina 3

    Contents Copyrights and Trademarks Introduction I m p o r t a n t S a f e t y I n s t r u c t i o n s ................ . 6 When choosing a place for this produc t. . . . . . . . 6 W h e n s e t t i n g u p t h i s p r o d u c t ............. .. 6 W h e n u s i n g t h i s p r o d u c t ....... ........... . 6 W h e n h a n d l i n g t h e i n k c a[...]

  • Pagina 4

    F o l d e d D o u b l e - S i d e ( W i n d o w s o n l y ) ......... 7 6 N - u p .......................... ...... 7 6 P o s t e r ( W i n d o w s o n l y ) .... ........... .... 7 7 Printing Multiple Documents (the Layout M a n a g e r ) ( W i n d o w s O n l y ) .................. 8 1 S e t t i n g P r o c e d u r e s f o r P r i n t i n g .....[...]

  • Pagina 5

    N o t e s o n T r a n s p o r t i n g ................ .. 1 4 8 A f t e r M o v i n g o r T r a n s p o r t i n g ............. 1 4 8 S y s t e m R e q u i r e m e n t s .................. ... 1 4 8 S p e c i f i c a t i o n s T a b l e ........... ............ 1 4 9 S t a n d a r d s a n d A p p r o v a l s ................. 1 5 0 Where To Get Hel[...]

  • Pagina 6

    Introduction Important Safety Instructions Read all of these instructio ns before using the printer. Also be sure to follow all warnings and instructions marked on the printer. When choosing a place for this product ❏ Place this product on a fl at, stable surface that i s larger than this product . This product will not operate pr operly if i t i[...]

  • Pagina 7

    ❏ Always turn the product off using the Po wer button on the control panel. When this button is pressed, the Power light flashes brief l y t h e n g o e s o f f . D o n o t unplug the power c ord or turn off the produ ct until the Power light stops flashing. When handling the ink cartridges ❏ Keep ink cartridges out of the reach of children and[...]

  • Pagina 8

    Macintosh refers to Mac OS X. ❏ Mac OS X refers to Mac OS X 10.5.8 and l ater versions . SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Introduction 8[...]

  • Pagina 9

    Printer Parts Front section A Printer cover Open this cover when cleaning the printer or clearing jam s. B Poster board support Raise this support so that you can plac e the media on it when printing on poster board. The support ensures that poster boards feeds smoothly. U “Loading and Removing Poster Board” on page 31 C Maintenance box covers [...]

  • Pagina 10

    D Paper basket Output from the printer collects in this bask et, keeping the media cl ean and free of creases. It can hold up to 20 sheets of plain pape r printed in line drawing mode. The optional Stand (24”) for the SC-T 3000 Series comes with a paper basket. U “Using the Paper Basket” on page 37 E Casters There are two casters on each leg.[...]

  • Pagina 11

    Green : 1000Base-T O USB port Connect the USB cable here. P Control panel U “Using the Control Panel” on page 40 Q Alert lamp This lamp lights or flas hes when an error occurs. Lights or flashes : An error has occurred. How the lamp lights or flashes varies with th e type of error. The control panel displays a description of the error. Off : No[...]

  • Pagina 12

    Roll paper adapter Use the supplied roll pape r adapter when loading roll paper onto the printer. U “Loading Roll Paper” on page 24 A Adapter lock lever Lift to unlock, lower to lock. Unlock when attaching roll paper to the adapter, loc k once the roll is attached. B Size l ever Position according to the size of the roll core. Control panel A P[...]

  • Pagina 13

    D Screen Displays the printer’s stat us, menus, erro r messages, and so on. U “Screen View” on page 13 E Menu button Displays the menu for the tab currently selected in the displa y. U “Using the Control Panel Menu” on page 99 F y button (Back button) If menus are displayed, pressing this button takes you up one level in the menu hierarch[...]

  • Pagina 14

    Displays the printer’s status, operation, and error messages. U “What to Do When a Message Is Displayed” on page 125 B Tabs/Info Display Area The tab/info display area contains the six tabs listed below. Use the l / r buttons to select a tab. Information on the selected tab appears in the info display area. , : The P rint Queues Tab This tab [...]

  • Pagina 15

    : An error occurred. Check the message on the sc reen, and clear the error . : Non-gen uine cart ridge. Epson recommends the use of genuine Epson ink cartridges.Epson cannot guarantee the quality or reli ability of non-genuine ink. 2 Ink color codes C: C y a n Y: Y e l l o w M: M a g e n t a MK : Matte Black PK : P hoto Black - : The Maintenance Ta[...]

  • Pagina 16

    Features The main features of this printer are described below. Realizing High Productivity High-speed printing The speed of the print head and paper feed have been increased for faster printing. The printer is equipped with a high-s peed rotary cutter for quick cutting, significantly increasing p roductivity. Paper basket holds consecutive sheets [...]

  • Pagina 17

    New printer driver offers greatly improved ease-of-use Print settings can be optimiz ed simply by choosing the desired use or target. This spares you the troubl e of adjust ing print settings individu ally. On startup, the printer driver automatically checks the status of the paper load ed in the printer and displays it in the Media Settings di alo[...]

  • Pagina 18

    Notes when using the printer Note the follow ing points when using this printer to avoid breakdowns, malfunct ions , and print quality decline. ❏ When using the printer, observe the operating temperature and humidity range described in the "Specifications Table". U “Specifications Table” on page 149 Even when the conditions above ar[...]

  • Pagina 19

    ❏ To ensure good results, use all the ink in the cartridge within a year of installation. ❏ Ink cartridges that have been stored at low temperatures for an ex tended pe riod should be allowed to return to room temperature ove r a period of four hours. ❏ Do not touch the IC chips on the sides of ink cartridges. You may not be able to print pro[...]

  • Pagina 20

    ❏ If you put the print outs in an album before they are completely dry, they may be blurred. ❏ Do not use a drye r to dry th e print outs. ❏ Avoid direct sunlight. ❏ Prevent color distortion while displaying or storing the print outs by following the instructions in the paper’s documentation. Note: Typically, print outs and phot os fade o[...]

  • Pagina 21

    Introducing the Supplied Software Contents of the Software Disc The supplied Software Disc contains the fo llowing software. Install as required. More in format ion be fou nd in the Network Guide (pdf) or via online help for the application in question. For Windows Software Name Epson Driver and Utilities The fo llowing soft ware is installed. Prin[...]

  • Pagina 22

    Software Name Epson Network Utilities Select this option during instal lation if the printer and computer are connected via a n e t w o r k . I n s t a l l i n g t h i s u t i l i t y a l l o w s a w i z a r d t o b e u s e d t o s i m p l i f y t h e p r o c e s s o f s e t t i n g the addresses needed for network co nnections. EpsonNet Config Wit[...]

  • Pagina 23

    Summary of the Printer Driver The main functions of the pr inter driver are described below. ❏ Converts print data receiv ed from applications into printable data and sends it to the printer. ❏ S e t t i n g s s u c h a s d o c u m e n t size and print quality can be adjusted from the settings dialogs. Windows You can save these sett ings and e[...]

  • Pagina 24

    Basic Operations Loading and Removing the Roll Paper Loading Roll Paper Load roll paper after attach ing the supplied roll paper adapters. c Important: Insert the paper just before printing. The roller may leave an impression on paper that is left in the print er. Note: The paper that can be used in the printer is detailed in the following section.[...]

  • Pagina 25

    2-inch core F Raise the adapter lock lever to releas e the lock on each of the two roll pape r adapters. G Attach an adapter to each end of the roll. Press the adapters in until they are fully inserted in the roll, with no gaps. H Lower the lock levers to lock the adapters in place. I Slide th e roll paper right unti l it contact s the adapter guid[...]

  • Pagina 26

    Pull the paper straight through until the leading edge of the paper reach es the lines on th e poster board supports as shown. Note: Do not touch the paper wh ere it will be printed. After loading the roll pape r, rotate the roll paper adapters as shown to feed the paper through. L Lower the roll lock lever. M Following the on-screen ins tructions,[...]

  • Pagina 27

    ❏ Manual cut: Press the ) button to cut the paper using the built-in cutter. A cutline is printed for manual cutting and can be used as a guide when cutting paper using the built-in cutter. You can specify the method either from the control panel or the printer driver. Note, however, that the setting select ed with the printer d river takes prior[...]

  • Pagina 28

    Removing the roll paper This section describe s how to remove and store roll paper after printing. The pressure rollers may leave impressions on paper that is left in the printer. Buttons that are used in the following settings A Confirm that the printer is ready and press the ( button. The Load/Remove Paper menu wil l be displayed. B Press the d /[...]

  • Pagina 29

    G Lift the adapter lock le vers to release the roll paper adapters. H Remove the roll paper adapters. After rewinding the roll paper carefully, stor e it in the original package. Close the rol l paper cove r. Loading and Removing Cut Sheets The procedure for loading and positioning cut sheets varies with the thickness of th e paper. 0.08 to 0.8 mm [...]

  • Pagina 30

    A Turn on the printer by pressing the P button. Note: ❏ Closing the paper basket makes the work easier. U “Using the Paper Basket” on page 37 ❏ Leaving the poster board supports raised can cause jams; lower all the sup ports before proceeding. To lower the supports, gras p them, pull them diago nally downw ard, and then release. B Press the[...]

  • Pagina 31

    Removing Cut Sheets This section describe s how to remove cut sheets when printing is complete. Note: To remove paper that was loaded but not used, press the ( button and select Remove Paper . Buttons that are used in the following settings A Confirm that Paper Eject is displayed in the control panel. Keeping a hand on the cut sheets to prevent the[...]

  • Pagina 32

    Note: The paper that can be used in the printer is detailed in the following section. U “Supported Media” on page 139 A Turn on the printer by pressing the P button. Note: Closing the paper basket makes the work easier. U “Using the Paper Basket” on pag e 37 B Press the ( button in the contr ol panel. Press the d / u button to highlight Pos[...]

  • Pagina 33

    E Insert the board, using the edge to kee p the supports pressed down. F Open the printer cover. G I n s e r t t h e b o a r d , c h e c k i n g t o b e s u r e t h a t i t p a s s e s under the rollers. H Close the printer cover. I Position the trailing and right edges of the bo ard as shown by the loading indicators. Center the right edge over th[...]

  • Pagina 34

    Removing Poster Board This section describes how to remov e poster board when printing is complete. Note: To remove paper that was loaded but not used, press the ( button and select Remove Paper . Buttons that are used in the following settings A Confirm that Paper Eject is displayed in the control panel. Keeping a hand on the poster board to preve[...]

  • Pagina 35

    Viewing and Changing Media Settings The following is displayed in the control panel after paper is loaded. Note: If On is selected for Roll Paper Remaining and a barcode with roll data is printed on the current roll, the printer will read the barcode and adjust settings automatically, and the above dialog will not be displayed. Checking Media Setti[...]

  • Pagina 36

    A Select an op tion. To print at current settings Press the d / u buttons to highlight Keep Settings Above and press the Z button. Proceed to Step 6. To change settings Press the d / u buttons to highlight Change Settings and press th e Z button. B Highlight a setting you wi sh to change and press the Z button. C Highlight an option and press the Z[...]

  • Pagina 37

    Cut Shee ts Cut sheets are automatically ejected to the rear, where they can be removed by hand. Poster Board Poster board is partial ly ejected to the front. Supporting the board with o ne hand to prevent it falling, press the Z button and pull out the board. If the next job will not use poster board, lower all the poster board supports. Leaving t[...]

  • Pagina 38

    Press the paper basket to the opposi te side. Opening the Paper Basket If the paper basket is closed, it can be opened for use as described below. Lightly pull the paper basket down. c Important: The paper basket will not function correctly when opened to the position shown below at rig ht. Stop when the paper basket is in the position shown below [...]

  • Pagina 39

    Guide positioned for other sizes of paper Using the Auto Take-up Reel Unit (SC-T7000 Series Only) The optional auto take-up reel unit automaticall y takes up paper as it is printed. It i mproves efficiency for banners or large jobs involving continuous printing on roll paper. The auto take-up reel unit for this printer can take up paper in eith er [...]

  • Pagina 40

    c Important: Confirm that the end of the roll is cut straight across. The unit will not fu nction as expec ted if the end of the roll is wavy or curved . U “Manual cut method” on page 27 Note: For information on installing the auto take-up reel unit, see the documentation suppli ed with the auto take-up reel unit attachment. Using the Control P[...]

  • Pagina 41

    Buttons that are used in the following settings A Set the auto take-up reel unit Auto switc h to Off. Plug the power cord into an outlet and confirm that the power lamp lights. B Turn on the printer by pressing the P button. C Check that the roll paper is correctly loaded in the printer. D Press the ) button in the control panel. Keep the d button [...]

  • Pagina 42

    Note: The tensioner supplied with the auto take-up reel unit is used with some types of paper. Slacken the paper and insert the tensioner near the center of the paper as shown. See the following section for information on paper that requires the tensioner. U “Epson Spe cial Media Tabl e” on page 13 9 H Set the Auto switch to Forward. Taking Up [...]

  • Pagina 43

    E Tape the end to the roll core. Place tape (available from third-party suppliers) at the center and then at the left and right ends. F Keep the d button in the control panel pressed until you have fed enough paper for about three wraps around the roll core. G Keep the Manual switch pressed to Backward to wrap the paper three times around the core.[...]

  • Pagina 44

    A Set the Auto switch to Off. B Cut the paper and take it up until it is all on th e auto take-up reel unit roll core. U “Manual cut method” on page 27 After cutting the paper, support th e end to prevent the printed surface touching the floor; continue to support the paper until it is all taken up. Keep the Manual switch pressed in the take-up[...]

  • Pagina 45

    Basic Printing Methods (Windows) Printing is performed from the application used to create the document you wish to print. The basic procedure is described below. A Turn on the printer, and load the paper. U “Loading Roll Paper” on page 24 U “Loading Cut Sheets” on page 29 U “Loading Poster Board” on page 31 B When you have created the [...]

  • Pagina 46

    E In the Size Settings area, choose the desired Paper Size . Choose the Paper Size selected when the document was created in the application. If the desired size is not available in the menu, click Custom Paper Size to add a cu stom paper size. U “Printing at Non-Standard Sizes” on page 64 F Select “fit to” and borderless printing options. [...]

  • Pagina 47

    I Click the OK butt on. J When settings are complete, click Print . The progress bar is displa yed, and printing starts. Screen while printing The following screen is displayed when you start printing, and the progress bar (the computer’s processing status) is displaye d. On this screen you can check the remaining ink level, product numbers for t[...]

  • Pagina 48

    Basic Printing Methods (Mac OS X) A Turn on the printer, and load the paper. U “Loading Roll Paper” on page 24 U “Loading Cut Sheets” on page 29 U “Loading Poster Board” on page 31 B When you have created the data, from th e File menu of the application, click Print and so on. C The print screen is displayed. Mac OS X v10.7 Click Show D[...]

  • Pagina 49

    XXXX (cut sheet): Prin t with margins on cut sheets. Print with top, right, and left margins of 3 mm and a bottom margin of 14 mm. When performing borderless or banner printing; see U “Borderless Printing” on page 67 , U “Enlargements and Horizontal and Vertical Banners” on page 58 E To view basic print settings, select Printer Settings fro[...]

  • Pagina 50

    Also, if an error occurs while printing, a notification message is displayed. SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations 50[...]

  • Pagina 51

    Printable area This section describes t he printable areas for the prin ter. If the margin set in an application is larger than the following set ting values, sect ions beyond the specified margins are not printed. For example, if 15 mm is selected for the left and right margins in the printer menus and the document fills the page, the 15 mm at the[...]

  • Pagina 52

    The arrow in the illustration indicates the direct ion of the ejecte d paper. Turning Off the Power Using Power Off Timer The printer offers the following two power management options. ❏ Sleep mode The printer enters s leep mode when ther e are no errors, no print jobs being received, and no control panel or o ther operati ons performe d. When th[...]

  • Pagina 53

    About Power Managem ent You can adjust the time be fore Power Management is applied. Any increase will affect the printer’s energy efficiency. Please consid er the environment before making any change. Canceling Printing There are a few ways to st op pr inting operations depending on the situation. When the computer has finished sending data to t[...]

  • Pagina 54

    Canceling from the computer (Mac OS X) A Click the printer icon in the Dock. B Select the job you want to cancel, and then clic k Delete . If the job has been sent to the printer, print data is not displayed on the above screen. Canceling on the printer Press the W button, select Job Cancel on the screen, and then press the Z button. The print job [...]

  • Pagina 55

    Using the Optional Hard Disk Unit The Purpose of the Hard Disk Unit W h e n a n o p t i o n a l h a r d d i s k u n i t i s c o n n e c t e d , p r i n t j o b s can be viewed and managed as described below. Print Job Managemen t • From the Print Queues menu For more information, see U “Viewing and Printing Saved Print Jobs” on page 57 • Fr[...]

  • Pagina 56

    Note: Held print jobs can be saved if On is selected for Store Held Job in the control panel Setup menu. The factory default setting is Off . U “Setup menu” on page 107 • Viewing and Printing Stored Jobs Print jobs can be stored on the hard disk unit and printed at a later date. Print jobs selected for printing at a later date can be printed [...]

  • Pagina 57

    C In the Advanced tab, clic k the Sett ings button in the Hard Disk Unit area and select Print and Save or Save only . D Next, print the document normally. If Save only is selected, the print job will be saved to the optional hard disk unit but not printed. Viewing and Printing Saved Print Jobs This section describe s how to view and print saved jo[...]

  • Pagina 58

    More Ways to Print Enlargements and Horizontal and Vertical Banners The printer driver can enlarge or reduce documents for different paper sizes. Ther e are three setting methods. Befor e printing at non-st andard si zes, inc luding v ertical or horizontal banners and documents with equal sides, enter the desired paper size in the printer driver. U[...]

  • Pagina 59

    Fitting Documents to the Width of the Roll Paper Making Settings in Windows A Display the printer driver’s Printer Se ttings tab and select a Paper Siz e that matches the document page size. U “Basic Printing Methods(Windows)” on page 45 B In the Layout tab, select Reduce/Enlarge and click Fit to Roll Paper Width . C Choose whether to fit the[...]

  • Pagina 60

    B Select Fit to Roll Paper Width and choose whether to fit the short or long edge of the document to the r oll paper width. C Check other settings, and then start printing. Choosing a Print Size Making Settings in Windows A Display the printer driver’s Printer Se ttings tab and select a Paper Siz e that matches the document page size. U “Basic [...]

  • Pagina 61

    B Select Specify Size , choose a method for specifying the size, and select a size. Enter a value dire ctly or click the arrows to the right of the scale box to set the value. C Check other settings, and then start printing. Fitting Documents to the Output Size Making Settings in Windows A Display the printer driver’s Printer Se ttings tab and se[...]

  • Pagina 62

    B Select Fit to Output Size and choose a paper size that matches the paper in the printer. C Check other settings, and then start printing. Note: Output can also be fitted to the paper size by selecting Scale to fit paper size in the p rint dialog Paper Handling pane. Making Enlarged Copies with a Scanner Connect an Epson scanner to the printer mak[...]

  • Pagina 63

    c Important: Connect the scanner directly to the printe r. Enlarged copies are only available when the scanner is connected directly to the printe r. Making Enlarged Copies Buttons that are used in the following settings A Turn the printer and scanner on. The devices may be turned on in any order. B Load the printer with paper that supports enlarge[...]

  • Pagina 64

    ❏ A4/2->Banner(Auto) is selected f or Auto . ❏ B1 , A0 , or A0 (2 Sheets) is selected for Output Size ❏ The original is 4 by 6 size ❏ The original is printed on thick stock (e.g., postcards or photographs ) ❏ When multiple copies ar e made from an original placed on the glass, the original may be scanned once for each copy. Wait until [...]

  • Pagina 65

    Making Settings in Windows A Display the printer driver’s Printer Se ttings tab and click the Custom Paper Size . U “Basic Printing Methods(Windows)” on page 45 c Important: Custom Paper Size is not available when Front - Poster Board is selected fo r Source . B Enter the desired size i n the User Defined Paper Size dialog and click Save . ?[...]

  • Pagina 66

    C Enter the Width , Height for the Paper Size , and enter the margins, and then click OK . The range of values available for page sizes and margins vary with the printer model and the values selected wit h the printer. U “Printable area” on page 51 Note: ❏ To edit a saved custom size, choose its name from the list on th e left. ❏ To copy a [...]

  • Pagina 67

    Making Settings for Mac OS X A Display the print dialog and select Printer Settings from the list. U “Basic Printing Methods(Mac OS X)” on page 48 B Click the Select Target for Mode and select CAD/Line Drawing(Black) or CAD/Line Drawing(Color) . Note: The CAD/Line Drawing(Black) and CAD /Line Drawing(Color) options are available for Select Targ[...]

  • Pagina 68

    ❏ Retain Size Create the print data larger than th e paper size in the applications to produce borderless output. The printer driver does not enlarge th e image data. Use settings such as Page Layout in the applicati ons to set the size of the image data as follows. - Create print data l arger than its actual print size by 3 mm on the left and ri[...]

  • Pagina 69

    About Roll Paper Cutting When performing borderless printing on ro ll paper, you can sp ecify whether it is left and right borderless printing or all edges borderless printing, and how to cut the paper in the printer driver’s Roll Paper Option . The cutting operation for each value is shown in the fol lowing chart. Printer driver settings Borderl[...]

  • Pagina 70

    Setting Procedures for Printing Making Settings in Windows A Display the printer driver’s Printer Se ttings tab and adjust the following settings. U “Basic Printing Methods(Windows)” on page 45 B Select Borderless in the Size Settings ar ea. To fit output to the roll width, cho ose Fit to Roll Paper Width before selecting Borderless . C In th[...]

  • Pagina 71

    D When roll paper is used, Auto Cut options are available in the Advanced tab Roll Paper Option area. U “About Roll Paper Cutting” on page 69 E Check other settings, and then start printing. Making Settings for Mac OS X A Open the Print screen and select th e paper size from the Paper Size option, and then select a borderless printing method. U[...]

  • Pagina 72

    Correct color and print The printer d river automati cally and internally corrects colors to matc h the color sp ace. You can select from the following color correction modes. ❏ EPSON Standard (sRGB) Optimizes the sRGB space and corrects the color. ❏ Business Graphics Performs color correction to sharpen your images based on the sRGB space. ❏[...]

  • Pagina 73

    Select Color Management and then Document . Select Printer Manages Colors as the Color Handling setting, and then click Print . B In the printer dri ver’s Printer Sett ings tab, select Advanced Settings for P rint Quality and choose a color correction option. U “Basic Printing Methods(Windows)” on page 45 Additional adjustments can be made by[...]

  • Pagina 74

    Note: For information on suppo rted platforms, see the website for the application in question . Example of Adobe Photoshop CS5 Open the Print scr een. Select Color Management and then Document . Select Printer Manages Colors as the Color Handling setting, and then click Print . B Display the Print screen. U “Basic Printing Methods(Mac OS X)” o[...]

  • Pagina 75

    F Make the necessary settings. See the printer drive r help for more details on each item. G Check other settings, and then start printing. Multi-Page/Poster Printing You can print multiple pages on a single sheet or a single page across multiple sheets. The following three multi-page/poster printing methods are available. • Folded Double-Side (W[...]

  • Pagina 76

    • Poster (Windows only) A single page can be printed across multiple sheets. The sheets can then be joined together to l arge posters (up to 16 times the original size). If Borderless Poster Print is selected, the sheets can be joined without trimming the edge s, but because the portions outsid e the edges of the paper will be lost, the joins may[...]

  • Pagina 77

    B In the Print Layout dial og, select the Number of pages per sheet and Page Order . If the Print page frames check box is selected, page frames are printed on each page. C Check other settings, and then start printing. Making Settings for Mac OS X A When the Pri nt screen is disp layed, sel ect Layout from the list, and then specify the number of [...]

  • Pagina 78

    C Enable or disable borderless print ing. When borderless is sele cted: Select Borderless Poster Print . Note: ❏ If Borderless Poster Print is grayed out, the selected paper or the size does not sup port borderless printing. U “Supported Media Sizes for Borderl ess Printing” on page 68 U “Epson Speci al Media Tabl e” on page 139 ❏ If Si[...]

  • Pagina 79

    The following describes how to join four printed pages together. A Ready the two t op sheets and trim the excess from the left sheet by cutting along the line joining the two join guides (the centers of the X marks). B Lay the upper left sheet on top of uppe r right sheet. Lineup the X marks as shown in the illustration below, and temporarily faste[...]

  • Pagina 80

    E Repeat steps 1 to 4 for the lower sheets . F Trim the bottom from the uppe r sheets by cutting alon g the line join ing the join guides (the centers of the X marks) . G Lay the upper sheet on top of the lo wer sheet. Lineup the X marks as shown in the illustration below, and temporarily fasten them using an adhesive tape on the back. H With the t[...]

  • Pagina 81

    J After joining all the sheets, trim off the borders by cutting al ong the cut gu ides (outsid e the X marks). Printing Multiple Documents (the Layout Manager) (Windows Only) Documents created in different applications can be printed together in your choice of layout. The Layout Manager can be used to improve efficiency and conserve paper. Sample M[...]

  • Pagina 82

    Setting Procedures for Printing A Open the file you want to print in your application. B In the printer dri ver’s Printer Sett ings tab, select Layout Manager and in the Size Sett ings area select the Paper Size chosen for the document in the source application. U “Basic Printing Methods(Windows)” on page 45 Note: The Paper Size is the size o[...]

  • Pagina 83

    Saving A On the Layout Manager screen, click File menu and then Save As . B Enter the file name, s elect the location, and th en click Save . C Close the Layout Manager screen. Opening saved files A Right-click the Util ity shortcut icon on the Windows Taskbar ( ), and then click Layout Manager on the menu displayed. The Layout Manager screen is di[...]

  • Pagina 84

    Color Management Printing About Color Management Even when using the same image data, the original image and the displayed image may look different, and the printed results may look different to the image yo u see on the display. Th is occurs due to the difference in characteristics when input devices such as scanners and digital cameras capture co[...]

  • Pagina 85

    Setting profiles Settings for the inpu t profile, printer profile, and intent (matching method) vary betw een three types of color management printing since their color management engines are used differently. Th is is because color management usage differs between the engine s. Make settings in the printer driver or application as described in the[...]

  • Pagina 86

    C Set color management to off. For Windows In the Printer Settings tab, select Advanced Settings in the Print Quality area and choose Off (No Color Management) for Color Mode . Note: When using Wi ndows 7/ Windows Vista/Windows X P ( S e r v i c e P a c k 2 o r l a te r a n d . N E T 3 . 0 ) , Off (No Color Management) is automatically selected. Fo[...]

  • Pagina 87

    Select Color Management and then Document . Select Printer Manages Colors as the Color Handling setting, and then click Print . When using applications without a color management function, start from step 2 . B In the printer dri ver’s Printer Sett ings tab, select Advanced Settings for Print Qualit y , then selec t ICM for Color Mode and click S[...]

  • Pagina 88

    D Choose Printer Settings from the list and select Advanced Settings for Mode . Select Off (No Color Management) for Color Mode . E Check other settings, and then start printing. Color management printing by Driver ICM (Windows only) The printer driver uses its own printer pr ofiles to perform color management. You can use the following two color c[...]

  • Pagina 89

    A In the printer dri ver’s Printer Sett ings tab, select Advanced Settings for Print Qualit y , then selec t ICM for Color Mode and click Settings . U “Basic Printing Methods(Windows)” on page 45 B From ICM Mode in the ICM screen, select Driver ICM (Basic) or Driver ICM (Advanced) . If you select Driver ICM (Advanced) , you can specify the pr[...]

  • Pagina 90

    Tips for Using the Printer Driver (Windows) Displaying the Settings Screen You can access the printer driver in the following ways: ❏ From Windows applications U “Basic Printing Methods(Windows)” on page 45 ❏ From the Printer icon From the Printer icon Follow the steps below when specifying common settings among applications or performi ng [...]

  • Pagina 91

    Displaying Help You can access the printer dr iver help in the following ways: ❏ Click Help ❏ Right-click on the item you want to check and display Click the Help Button to Display By displaying help, you can use the contents page or keyword search to read the help. Right-click on the item you want to check and display Right-click the it em, an[...]

  • Pagina 92

    Customizing the Printer Driver You can save the s ettings or change the display items as you prefer. Saving various settings as your Select Settings All printer driver settings can be saved to Se lect Setting . In addition, Select Se tting contains pre-defined settings recommended for a variety o f common situations. Recall Select Setting to increa[...]

  • Pagina 93

    C Adjust settings for the new custom media and click OK . D Click Custom Settin gs in the Advanced tab. E Enter any name in the Name box, and then cl ick Save . You can save up to 100 settings. You can choose a setting you have registered from the Media Type list box. Note: You can save the settings as a file by clicking Export . You can share the [...]

  • Pagina 94

    ❏ To delete a group (folder), click Delete Group . ❏ Drag and drop unnecessary items to Not Display . Note: When Delete Group is performed, the group (folder) is deleted, ho wever the items in the delete d group (folder) remain. D Click Save . Overview of the Utility Tab The printer driver’s Utility tab provid es access to the following. Nozz[...]

  • Pagina 95

    EPSON Status Monitor 3 You can check the printer’s st atus, such as the remaining ink level and error messages, from the computer’s screen. Monitoring Preferences You can select the error noti fications displayed on the EPSON Status Monitor 3 screen, or register a shor tcut for the Utility icon to the Taskbar. Note: If you select the Shortcut I[...]

  • Pagina 96

    Uninstalling the printer driver Follow the steps below to remove the printer driver and EPSON LFP Re mote Panel 2. c Important: ❏ You must log in with an Administrators group. ❏ In Windows 7/Windo ws Vista, if an Administrator password or confirmation is requested, enter the password and then continue with the operation. A Turn off the printer,[...]

  • Pagina 97

    Tips for Using the Printer Driver (Mac OS X) Displaying the Settings Screen The display meth od of the printer driver setting screen may differ depending on the application or the OS version. U “Basic Printing Methods(Mac OS X)” on page 48 Displaying Help Click in th e printer driver setting screen to display Help. Using Epson Printer Utility 4[...]

  • Pagina 98

    EPSON Status Monitor You can check the printer’s st atus, such as the remaining ink level and error messages, from the computer’s screen. Nozzle Check This function prints a nozzle check pattern to check if the print head nozzles are cl ogged. If you see banding or gaps in the print outs, perform head clean ing to clear any clogged nozzles. U ?[...]

  • Pagina 99

    Using the Control Panel Menu Menu Operations The steps for displaying the various menus are shown below. The example be low shows the steps for accessing the Paper menu. *1 Availabl e when optio nal ha rd disk unit is installed. *2 Standard menu (displayed if option al hard disk unit is not installed). *3 After pressing the Z button to select the h[...]

  • Pagina 100

    Menu List The items and options available in the menu are describe d below. See the reference pages for more details on ea ch item. , Print Queues menu U “Print Queues menu” o n page 104 Menu item Description Print Queue XXXXXXXXXXX (name of queued print job) List s the Waiting Job Na me, User, Estimated Start Time, Estimated Print Time, and Pr[...]

  • Pagina 101

    Menu item Description Custom Paper Setting XXXXXXXXXXXX XXXXXXXX (name of custom paper type) Selec t Ref erenc e Paper Photo Paper Lists suppor ted Epson media. Matte Paper Plain Paper Others No Paper Selected No Paper Selected Platen Gap Narrow, Standard, Wide, Wider Detect Paper Thickness Press Z to s tart printin g. Paper Feed Adjust Pattern Pre[...]

  • Pagina 102

    / Setup menu U “Setup menu” on page 107 Menu item Description Printer Setup Roll Paper Setup Auto Cut On, Off Refresh Margin O n, Off Page Line On, Off Roll Paper Margin Normal, Top15 mm/Bottom15mm, Top 35 mm /Bottom 15 mm, Top 45 mm/Bottom 15 mm, 3mm, 15mm Roll Paper Remaining On, Off Remaining Alert 1 to 15 m (4 to 50 ft) Advanced Settings Ro[...]

  • Pagina 103

    Menu item Description Administrator Menu Change Password Enter a password. Operational Control Network Setup Password Required, No Password Required Power Cleaning Manage HDD Format Hard Disk Yes, No Date And T ime MM/DD/YY HH:MM Time Zone Enter the time difference between GMT and the current time zone. Reset All Settings Yes, No + Enlarged Copy me[...]

  • Pagina 104

    Menu Descriptions Print Queues menu Item Description Print Queue * XXXXXXXXXXX ( name of queued print j ob) Waiting Job Name User Estimated Start Time Estimated Print Time Printing Availability Lists the estimated start time and time needed to print t he select ed job. It also predicts whether the jo b can be completed without replacing pa per, ink[...]

  • Pagina 105

    Item Description Print Job Log Sheet Press the Z button to pri nt the print j ob log. * Displayed only when optional har d disk unit is installed. Paper menu indicates factory default settings. Item Description Load/Remove Paper Remove Paper Press the Z button to view instructions fo r removing the paper. Follow the on-screen instructions to remove[...]

  • Pagina 106

    Item Description Paper Feed Adjust Pattern Use this setting if you are unable to resolve banding issues (horizontal striped lines or uneven colors) in the standard print area (for cut sheets, the area excluding the 1 to 2 cm strip at the bottom of the paper) ev en after head c leaning or head alignment. Pattern Selected Press the Z button to print [...]

  • Pagina 107

    Item Description Restore Settings Yes Restore the selected custom paper settings to default values. No Print Paper List Press the Z button to print a list of custom pa per setti ngs. Maintenance menu Item Descript ion Nozzle Check Press the Z button to print a nozzle chec k pattern. Visually inspect the printed pattern and perform head cleaning if [...]

  • Pagina 108

    indicates factory default settings. Item Description Printer Setup Roll Paper Setup Auto Cu t On Choose On to automatically cu t roll paper using the built-in cutter as each page is printed, Off to disable auto paper cutting. The setting selected with the printer driver takes priority when the printer driver is used. Off Refresh Margin On If On is [...]

  • Pagina 109

    Item Description Remaining Alert 1 to 15 m (4 to 50 ft) Displayed w hen On is selec ted for Roll Paper Remaining . Set within a range from 1 to 15 m (4 to 50 ft) to display a warning when the amount of remainin g roll paper d rops below that limi t. You can set in 0.5m (1 ft) increments. Advanced Setti ngs Roll Paper Tension Low Select High or Extr[...]

  • Pagina 110

    Item Description Store Held Job On Th is item is avai lable wh en an optional hard disk unit is installed. If On is selected, print jobs tha t require a paper type, source, or output paper siz e (width) that differs from those currently selected with the printer will be saved as held jobs; select Off to disable this feature. If Off is select ed, an[...]

  • Pagina 111

    Item Description Power Settings Sleep Mode 5 to 180 minutes The pr inter enters sleep mo de automatically when there are no errors, no print jobs being receiv ed, and no control panel or other operations are performed for the selected period. Use this option to choose the period before the prin ter enters sleep mode. U “Turning Off the Power Usin[...]

  • Pagina 112

    Item Description Administrator Menu Change Password Enter an administrato r password of up to 20 characters. Selecting A dministrator M enu displays a password pro mpt. The Admi n- istrator Menu will only be displaye d if the correct password is entered, preventing non-administrators from accidentally cha nging settings. Keep the password in a safe[...]

  • Pagina 113

    indicates factory default settings. Item Description Color/B&W Color Choose whether to copy in col or or in black and white. B&W Auto A3->Auto,B4->Auto,A4->Au- to,B5->Auto,A5->Auto,LTR->Au- to,4x6->Auto,A4/2->Banner(Au- to) With Border Document sizes are listed to the left of the ar rows. The copy is enlarged to fit [...]

  • Pagina 114

    Maintenance Adjusting the Print Head You need to adjus t the print head if white lines appear in your print outs or if you notice the print quality has declined. You can perform the following printer maintenance functions for maintaining the print head in good condition to ensure the best print quality. Carry out appropriate maintenance depending o[...]

  • Pagina 115

    From the printer Buttons that are used in the following settings A Make sure that the roll paper or a cut sheet of A4 size or larger is loaded in the printer. Make sure you set the paper source and media type correctly according to the paper you use. B Confirm that the printer is ready to print. Press the " button. The Maintenance menu will be[...]

  • Pagina 116

    Cleaning the print head From the computer Explanations in this section use the Windows printer driver as an example. Use Epson Printer Ut ility 4 for Mac OS X. U “Using Epson Prin ter Utility 4” on page 97 A Click Head Cleaning from the Utility tab in the printer driver’s Properties (or Printing preferences ) screen. B Click Start . Head clea[...]

  • Pagina 117

    ❏ From the printer Head alignment can be performed automatically or manually. In auto adjustment, the se nsor reads the adjustment pattern while it is printing, and automatically registers the optimum adjustment value to the printer. Auto head alignment takes about 30 minutes to complete. In manual adjustment, you need to check the pattern and en[...]

  • Pagina 118

    B Click Print Hea d Alignment from the Utility tab in the printer driver’s Properties (or Printing preferences ) screen. Follow the on-screen instructions to align the print head. The sensor reads the adju stment pattern while it is printing, and automatically register s the optimum adjustment value to the printer. From the printer Buttons that a[...]

  • Pagina 119

    Replacing Consumables Replacing Ink Cartridges If one of the installed ink cartridges is expended, printing cannot be performed. If an ink low warning is displayed, we recommend replacing the ink cartridge(s) as soon as possible. If an ink cartridge runs out while printing, you can continue printing after replacing the ink cartridge. However, when [...]

  • Pagina 120

    E Holding the cartridge with the label out , slide it all the way into the slot. Match the color of the ink cartri dge to the color of the label on the printer. Repeat steps 3 to 5 to re place other ink cartridges. c Important: Install all ink cartridges into each slot. You cannot print if any of the slots are empty. F Close the cartridge cover . c[...]

  • Pagina 121

    C Place the used Maintenance Box in the clear bag included with your new Maintenance Box, and make sure that the zipper is closed tight. D Install the new Maintenance Box. c Important: Do not touch the IC chip on the side of Maintenance Box. Doing so may prevent normal operation and printing. E Close the maintenance box cover. Replacing the Cutter [...]

  • Pagina 122

    ! Caution: Do not store the cutte r within the reach of children. The cutter’s blade could cause an injury. Pay careful attention when replacing the cutter. G Install the new cutter. Insert the cutter so that th e pin on the printer matches up with the hole on the cutt er. Use a cross-head screwdriver to tighten do wn the screw to hold t he cutte[...]

  • Pagina 123

    Cleaning the Printer To keep your pr inter i n optimu m operat ing con dition, clean it (about once a month). Cleaning the outside A Remove any paper from the printer. B Make sure the printer is turned off and th e screen has turned off, and then unplug the power cable from the electrical outlet. C Use a soft, clean cloth to carefully remove any du[...]

  • Pagina 124

    c Important: ❏ Be sure not to touch the roller or the ink absorbing areas (b, shown in gray) during cleaning; other wise, prints may be soiled. ❏ Be careful not to touch the ink tubes inside the printer, ot herwise, the printer may be damaged. D If any paper particles (that looks like white powder) accumulates on the platen, use something like [...]

  • Pagina 125

    Problem Solver What to Do When a Message Is Displayed If the printer displays one of the mess ages shown below, refer to the solutio n listed and t ake the necessary steps . Message What to do Ink Ca rtridg e Error Ink cartridge cannot be recognized. Insert again or replac e ink cartridge. ❏ Remove and reinsert the ink cartridge. If the message p[...]

  • Pagina 126

    Message What to do HDD Error HDD used for another printer needs to be formatted. Continue? Optional hard disk units that have been instal led on other devices must be formatted after being transferred to this printer. The disk can not be used until it is formatted. To format the disk, use the Setup menu in the control p anel. U “Setup menu” on [...]

  • Pagina 127

    Message What to do Paper Sensor Error Loaded paper or print out has a problem. Refer to the manual f or details. Press the W button to clear the error from the control panel. If this error is displayed w hen performing automatic head alignment, check the following items. ❏ Does the paper support auto head alignment? Head alignment is not availabl[...]

  • Pagina 128

    Ink system error 14**,162*,1900 Replacement part required 110*, 143* Mechanical error 15** SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Problem Solver 128[...]

  • Pagina 129

    Troubleshooting You cannot print (because the printer does not work) The printer does not turn on. o Is the power cable plu gged into the electrical outlet or the printer? Make sure the power cable is securely plugged into the printer. o Is there a problem with the power outlet? Make sure your outlet works by conne cting the power cable for an othe[...]

  • Pagina 130

    o Is the USB hub recognized correctly? Make sure the USB hub is recognized correctly on the computer. If the computer correctly detects the USB hub, disconnect all USB hubs from the computer and connect the printer directly to the comput er USB port. Ask the USB hub ma nufacturer about USB hub operation. You cannot print under the network environme[...]

  • Pagina 131

    The printer sounds like it is printing, but nothing prints The print head moves, but nothing prints. o Confirm the printer operation Print a nozzle check pattern. Because a nozzle check pattern c an be print ed withou t connecti ng to a computer, you can check the operations and print status for the printer. U “Checking for clogged nozzles” on [...]

  • Pagina 132

    o Have you compared the printing result with the image on the display monitor? Since monitors and printers produce colors differently, printed colors wi ll not al ways ma tch on-screen colors perfectly. o Did you open the pr inter cover while printing? If the printer cover is opened while printing, the p rint head stops suddenly causing unevenness [...]

  • Pagina 133

    o Is the paper crea sed o r folded ? Do not use old paper or paper with fol ds in it. Always use new pa per. o Is the paper wavy or slack? Cut sheets become wavy or slack due to chan ges in temperature or humidity which may result in the printer being unable to recogniz e the paper size correctly. Flatten the paper before loading it in the printer,[...]

  • Pagina 134

    o Are you printing on tracing paper? If too much ink is used when printing in B&W on tracing paper, you may get bet ter results by c hoosing a lower print density in the Pape r Configuration d i a l o g o r b y s e l e c t i n g Tracing Pape r <Low Duty> for Media Type . Margins appear in borderless printing. o Are the settings for the pr[...]

  • Pagina 135

    o Are you using the printer at normal room temperature? Epson special media shoul d be used at normal room temperature (temperature: 15 to 25˚C, humidity: 40 to 60%). o Is paper jammed in the printer? Open the printer cover of the printer and chec k that there are no paper jams or foreign objects in th e printer. If paper is jammed, see "Pape[...]

  • Pagina 136

    C Open the printer cover and move the print head away from the jam. D Remove the jammed paper. E After removing the paper, close the printer cover and press the Z button. Reload the paper and resume printing. U “Loading and Removing Cut Sheets” on page 29 Others The control panel display k eeps turning off. o Is the printer in sleep mode? Norma[...]

  • Pagina 137

    Appendix Options and Consumable Products The following options and consumable products are avai lable for use with your printer. (As of May, 2012) For the latest information, see the Epson Web site. Ink cartridges SC-T7000/SC-T7070/SC-T 5000/SC-T5070/SC-T3000/SC -T3070 Explanat ion Color Capacity 700 ml 350 ml 110 ml Photo Black T6941 T6931 T6921 E[...]

  • Pagina 138

    Product name Product number Explanation Roll Paper Belt C12C890121 This holder keeps roll pape r from unrolling after it is removed from the printer. U “Removing the roll paper” on page 28 Hard Disk Unit C12C843911 Use U “Using the Optional Hard Disk Unit” on page 55 Auto Take-up Reel Unit C12C815321 For the SC-T7000 Series . It can not be [...]

  • Pagina 139

    Supported Media We recommend yo u use the following Epso n special media for high-quality printing results. Note: For information about the media types and appropriate settings for printing on paper other than Epson special med ia or when using raster image processing (RIP) software, see the documentation supp lied with the pape r, or contact the d[...]

  • Pagina 140

    Premium Semigloss Photo Paper (250), 3 inch core Size Thickness Borderless Take-up Enlarg ed Head Alignment ICC Profile F B 406mm/16" 0.27mm ✓✓ ✓ ✓ ✓ EPSON SC-T3000_5000_7000_Serie s Premium Semigloss Photo Paper 250.icc 610mm/24" 914mm/36" *1 1118mm/44" *2 *1 SC-T3000 Series not supported *2 SC-T3000 Series/SC-T5000 S[...]

  • Pagina 141

    Photo Paper Gloss 250, 3 inch core Size Thickness Borderless Take-up Enlarg ed Head Alignment ICC Profile F B 432mm/17" 0.25mm ✓✓ ✓ ✓ ✓ EPSON SC-T3000_5000_7000_Serie s Photo Paper Gloss 250.icc 610mm/24" 914mm/36" *1 1118mm/44" *2 *1 SC-T3000 Series not supported *2 SC-T3000 Series/SC-T5000 Series not supported Premiu[...]

  • Pagina 142

    Enhanced Synthetic Paper, 2 inch core Size Thickness Borderless Take-up Enlarg ed Head Alignment ICC Profile F B 610mm/24" 0.13mm ✓ *2 ✓✓ -- EPSON SC-T3000_5000_7000_Serie s Enhanc ed Synth etic Paper.icc 1118mm/44" *1 *1 SC-T3000 Series/SC-T5000 Series not supported *2 Borderless prin ting availa ble, but borders may appear or prin[...]

  • Pagina 143

    Singleweight Matte Paper, 2 inch co re Size Thickness Borderless Take-up Enlarg ed Head Alignment ICC Profile F B 432mm/17" 0.15mm ✓ ✓ *3 - ✓✓ EPSON SC-T3000_5000_7000_Serie s Singleweight Matte Paper.icc 610mm/24" 914mm/36" *1 1118mm/44" *2 *1 SC-T3000 Series not supported *2 SC-T3000 Series/SC-T5000 Series not supporte[...]

  • Pagina 144

    Name Size Thickness Borderless Enlarged Head Alignment ICC Profile Photo Quality Inkjet Paper Super A3/B 0.12mm ✓ *2 - ✓ EPSON SC-T3000_5000_7 000_Series Photo Quality Ink Jet Paper.icc A2 - US-C ✓ *2 Enhanced Matte Posterboard 610 × 762 mm (24" × 30") 1.30mm - - - EPSON SC-T3000_5000_7 000_Series Enhanced Matte Poster Board.icc 7[...]

  • Pagina 145

    Usable Commercially Available Paper Size This printer supports the fo llowing paper specifications for non-Epson media. c Important: ❏ Do not use paper that is wrinkled, scuffed, torn, or dirty. ❏ Although plain paper and recycled paper manufactured by other companies can be loaded and fed in the pr inter as long as they meet th e follow ing sp[...]

  • Pagina 146

    Before printing on non-Epson media When using non-Epson media (Custom Paper), make the paper configuration according to the paper characteristics before printi ng. Settings are adjusted as follows. ❏ Select Custom Paper Setting in the printer Paper menu. U “Paper menu” on page 105 ❏ Save custom paper settings to the printer using EPSON LFP [...]

  • Pagina 147

    Notes When Moving or Transporting the Printer Perform the foll owing op erations when moving or transportin g the printer. Position your hands where sho wn when lifting the printer. SC-T7000 Series/ SC-T5000 Ser ies SC-T3000 Series c Important: ❏ Only hold the required area; otherwise, the printer may be damaged. ❏ Move and transport the printe[...]

  • Pagina 148

    Notes on Transporting When transporting the printer, repack it using the original box and packing materials to protect it from shock and vibration. After Moving or Transporting After moving or transpor ting, check if the p rint head is clogged before use. U “Checking for clogged nozzles” on page 114 System Requirements The following system requ[...]

  • Pagina 149

    Specifications Table Printer Specifications Printing method On-demand ink jet Nozzle configura- tion Black: 360 nozzles × 2 rows × 2 colors (Photo Black and Matte Black) Color: 360 nozzles × 2 rows × 3 colors (Yellow, Ma genta, and Cyan) Resolution (maxi- mum) 2880 × 1440 dpi Control code ESC/P raster (undisclosed command) HP-GL/2, HP RTL *1 P[...]

  • Pagina 150

    Printer Specifications Weight *3 SC-T7000 Series: Approximately 82 kg SC-T5000 Series: Approximately 75 kg SC-T3000 Series: Approximately 51 kg (With optional Stand (24”): Approximately 61 kg) *1 For information on HP-GL/ 2 and HP RTL, see the Epson website. *2 Paper bas ket clos ed. *3 Excluding ink cartridges. Ink Specifications Type Special in[...]

  • Pagina 151

    Where To Get Help Technical Support Web Site Epson’s Technical Support Web Site provides help with problems that cannot be solved using the troubleshooting information in your product documentation. If you have a Web br owser and can connect to the Internet, access th e site at: http://support.epson.net/ If you need the latest drivers, FAQs, manu[...]

  • Pagina 152

    Help for Users in North America Epson provides the technical support services listed below. Internet Support Visit Epson’s support website at http://epson.com/ support and select your product for solutions to common problems. You can do wnload drivers and documentation, get FAQs an d troubleshooting advice, or e-mail Epson with your questions. Sp[...]

  • Pagina 153

    We encourage you to have all the relevant information on hand when you ri ng. The more information you prepare, the faster we can help solve the pro blem. This information includes your Epson product documentation, type of c omputer, operating system, application programs, and an y information you feel is required. Help for Users in Singapore Sourc[...]

  • Pagina 154

    Bandung Lippo Center 8th floor Jl. Gatot Subroto No.2 Bandung Phone/Fax: (62) 22-7303766 Surabaya Hitech Mall lt IIB No. 12 Jl. Kusuma Bangsa 116 – 118 Surabaya Phone: (62) 31-5355035 Fax: (62)31-5477837 Yogyakarta Hotel Natour Garuda Jl. Malioboro No. 60 Yogyakarta Phone: (62) 274-565478 Medan Wisma HSBC 4th floor Jl. Diponegoro No. 11 Medan Pho[...]

  • Pagina 155

    World Wide Web ( http://www.epson.co.in ) Information on product specifications, drivers for download, and products enquiry ar e available. Epson India Head O ffice - Bangalore Phone: 080-30515000 Fax: 30515005 Epson India Region al Offices: Location Telephone number Fax number Mumbai 022-28261515 / 16/17 022-28257287 Delhi 011-30615000 011-3061500[...]

  • Pagina 156

    Software License Terms Open Source Software Licenses OPEN SOURCE SOFTWARE LICENSE 1) This printer product includes open source software progra ms listed in Section 6) acco rding to the license terms of each open source software program. 2) We provide the source code of the GPL Programs, LG PL Programs, Apache License Program and ncftp license Progr[...]

  • Pagina 157

    The list of LGPL Programs: uclibc-0.9.32 libusb-1.0.8 zeroconf 0.6.1-1 iksemel-rev25 e2fsprogs-1.41.14 Apache License This printer product includes the open source softwar e program “Bonjour” which apply the Apache License Version2.0 (“Apache License Program”). Bonjour License This printer product includes the open source soft ware program [...]

  • Pagina 158

    Bonjour This printer product includes the open sourc e software programs which apply the Apple Public Source License Version1.2 or its latest versio n ("Bonjour Programs"). We provide the sour ce code of the Bonjour Programs pursuant to the Apple Public Source License Version1.2 or its latest version until five (5) years after th e discon[...]

  • Pagina 159

    1.8 "Source Code" means the human re ad able form of a program or other work that is suitable for making modifications to it, including all modul es it contains, plus any associated in terface definition files, scripts used to control compilation and installation of an executable (object code). 1.9 "You" or "Your" mean[...]

  • Pagina 160

    2.4 Third Party Rights. You expressl y acknowledge and agre e that although Apple and each Contributor g rants the licenses to t heir respective portio ns of the Covere d Code se t forth herein, no ass urances are provided by Apple or any Contributor that the Covered Code does not infringe the pate nt or other intelle ctual proper ty rights of any [...]

  • Pagina 161

    9. LIMITATION OF LIABILITY. TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT SHALL APPLE OR ANY CONTRIBUTOR BE LIABLE FOR ANY INCIDE NTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR RELATI NG TO THIS LICENSE OR YOUR USE OR I NABILITY TO USE THE COVERED CODE , OR ANY PORTION THEREOF, WHETHER UNDER A THEORY OF CONTRACT, WARRANTY, TO[...]

  • Pagina 162

    13.2 Relationsh ip of Parties. This Licens e wi ll not be construed as creating an agency, partnership, joint venture or any other form of legal ass ociation between or among You, Ap ple or any Contributor, and You will not represent to the contrary, whether expressly, by impl ication, appearance or otherwise. 13.3 Independent Developme nt. Nothing[...]

  • Pagina 163

    Other Software Licenses Info-ZIP copyright and license This is version 2007-Mar-4 of the Info-ZIP license. The defin itive version of this document should be available at ftp://ftp.info-zip.org/pub/infozip/license.html indefini tely and a copy at http://www. info-zip.org/pub/infozip/ license.html. Copyright © 1990-2007 Info-ZIP. All rights reserve[...]