Electrolux S75348KG5 manuale d’uso

S75348KG5 User manual Fridge-Freezer[...]

Thank you for choosing on e of our high-quality prod ucts. To ensure optimal and regula r performanc e of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pas[...]

the appliance are thoroughly familiar with it s operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its l ife will be properly informed on appliance use and safety. For the safety of life and property keep the precautions of these user&apo[...]

2. Make sure that the power plug is not sq uashed or damaged by the back of the appliance. A squashed or damaged power plug m ay overheat and cause a fire. 3. Make sure that you can come to the mains plug of the appliance. 4. Do not pull the mains cable. 5. If the power plug socket is loose, do no t insert the power plug. There is a risk of electri[...]

• Adequate air circulation should be around th e appliance, lacking this leads to overheat - ing. To achieve sufficient ventilation follow the instructions relevant to installation. • Wherever possible th e back of the product should be against a wall to avoid touching or catching warm parts ( compressor, condenser) to prevent possible burn. ?[...]

12 Freezer temperature indicator 13 Freezer temperature regulator, - button 14 Alarm reset butto n 15 Alarm indicator Switching on 1. Insert the plug into the mains socket. 2. Set ON/OFF switch to ON. 3. The alarm indicator light flashes since the temperature is reached. The acoustic alarm sounds. 4. Press the alarm reset bu tton to reset the alarm[...]

1. press continuously the temperature regulator (+ button) until the letter " H" (Holiday) appears on the temperature indicator. The Holiday function sets the temperature ap - prox +15°C. The refrigerator is in the energy-saving mode. To deactivate the function: 1. set the required temperature by pres sing the fridge te mperature regulat[...]

In the event of accidental defrosting, for example due to a power failure, if the power has been off for longer than the value shown in the technica l characteristics chart under "rising time", the defrosted food must be co nsumed quickly or cooked immediately and then re-frozen (after cooling). Thawing Deep-frozen or frozen food, prior t[...]

Vegetable Drawer The drawer is suitable for storing fruit and vege - tables. There is a separator insi de the drawer that can be placed in different pos itions to allow for the subdivision best suited to personal needs. There is a grille (if foreseen) on the bottom of the drawer to separate the fruit and vegetabl es from any humidity that may form [...]

Removal of freezing ba skets from the freezer 1 2 2 1 The freezing baskets have a limit stop to prevent their accidental removal or falling out. At the time of its removal from the fr eezer, pull the basket towards yourself and, upon reaching the end point, remove th e basket by tiltin g its front upward s. At the time of putting it back, slightly [...]

Hints for refrigeration Useful hints: Meat (all types) : wrap in polythene bags and place on the glass shelf above the vegeta - ble drawer. For safety, store in this way on ly one or two days at the most. Cooked foods, cold dishes, etc..: these should be covered and may be placed on a ny shelf. Fruit and vegetables: these should be thorou ghly clea[...]

This appliance contains h ydrocarbons in its coo ling unit; mainte nance and recharging must therefore only be carried out by authorized technicians. Periodic cleaning The equipment has to be cleaned regularly: • clean the inside and accessories with lukewarm water and some neutral soap. • regularly check the door seals and wipe cl ean to ensur[...]

Defrosting of the freezer The freezer compartment of this model, on the other hand, is a "no frost" type. This means that there is no buildup of frost when it is in operation, neither on the inter nal walls nor on the foods. The absence of frost is due to the continuous circulation of cold air inside the compart - ment, driven by an auto [...]

Problem Possible cause Solution Water flows on the ground. The melting water outlet does not flow in the evaporative tray above the com pressor. Attach the melting water outl et to the evaporative tray. There is too much frost and ice. Products are not wrapped pro p - erly. Wrap the products b etter. The door is not closed correctl y. Refer to &quo[...]

Closing the door 1. Clean the door gaskets. 2. If necessary, adjust the door. Refer to "Installation". 3. If necessary, replace the defective do or gaskets. Contact the Service Center. TECHNICAL DATA Dimension Height 1850 mm Width 595 mm Depth 648 mm Rising Time 18 h The technical information are situ ated in the rating plate on the in te[...]

Location The appliance should be installed well away from sources of heat su ch as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appliance is positioned be - low an overhanging wall unit, the minimum dis - tance between the top of the cabinet and the [...]

3 Brown: Live 5 Blue: Neutral As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identi fying the terminals in yo ur plug, proceed as follow s: 1. Connect the wire coloured green and yellow to the terminal marked either with the letter “E“ or by the earth symbol or coloured green and ye[...]

Levelling When placing the appliance ensure that it stands level. This can be achieved by two adjust - able feet at the bottom in front. Removing the shelf holders Your appliance is equipped with shelf retainer s that make it possible to secure the shelves dur - ing transportation. To remove them proceed as follows: 1. Move the shelf holder s in th[...]

1. Open the doors. Unscrew the middle hinge (m2). Remove the plastic spacer (m1). 2. Remove the spacer (m6) and move to the other side of the hinge pivot (m5). 3. Remove the doors. 4. Remove the left-hand cover pi n of the middle hing e (m3,m4) and move to the other side. 5. Fit the pin of the middle hinge (m5 ) in - to the left-hand hole of the lo[...]

10. Remove the handle. Unscrew the top handle bracket from the hand le rod (h1). Unscrew t he bottom ha ndle brack - et from the door (h2) Unscrew the top handle bracket from the door (h3). 11. Install the handle in the opposite side. Re-screw the handle bracket on the door (h4). Turn the handle bracket with the handle and screw them to the door (h[...]

21[...]

22[...]

23[...]

www.aeg-electrolux.com/shop 210621236-1 1052010 925033134[...]