Electrolux K 78800-4 i manuale d’uso

SANT O K 78800-4 i Refriger ator Oper ating Instructions PERFEKT IN FORM UND FUNKTION[...]

2 Dear customer , Before placing your new r efrigerator/fr eezer into operation please r ead these operating instructions car efully . They contain important informa- tion for safe use, for installation and for care of the appliance. Please keep these operating instructions for futur e refer ence. P ass them on to possible new owners of the applian[...]

3 Contents Important Safety Instruction s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Dis posal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appliance P ackaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disposal of old Appliances [...]

4 Important Safety Instructions These warnings ar e provided in the inter ests of your s afety . Ensur e you fully understand them befor e installing or u sing the appliance. Y our safety i s of paramount importance. If you ar e un sure about the meaning of these warnings contact the Cu stomer Care Department for assi stance. Intended use • The r[...]

5 • Please make old appliances unusable prior to disposal. Pull out the mains plug, cut off the mains cable, break or r emove spring or bolt catches, if fitted. By doing this you ensure that childr en cannot lock themselves in the appliance when playing (there is risk of suffoca- tion!) or get themselves into other dangerous situations. • Often[...]

6 Disposal Appliance P ackaging Information All materials are envir onmentally sound! They can be disposed of or burned at an incinerating plant without danger . About the materials: The plastics can be recycled and ar e identified as follows: >PE< for polyethylene, e.g. the outer covering and the bags in the interior . >PS< for polysty[...]

7 Installation Installation Location The appliance should be set up in a well ventilated, dry room. Energy use and efficient performance of the appliance is affected by the ambient temperatur e. The appliance should therefor e – not be exposed to direct sunlight; – not be installed next to radiator s, cookers or other sour ces of heat; – only[...]

8 Installation Building-in Please check whether , after installing your appliance and especially after rever sing the door , the door seal seals right round. A badly fitting door seal may lead to heavy frosting and ther eby to a higher power consumption (see also „What to do if...“). Y our r efriger ator needs air Integratable models (i-applian[...]

9 Installation ☞ 1. The appliance’s door has been locked in position for transport by means of pins on both sides. According to the door opening dir ection, remove relevant pins at the top and at the bottom. B A 2. Press in the joint cover s between the appliance and the kitchen furniture. D765 3. Push the appliance into the housing until stop [...]

10 Installation 5. Apply blanking covers (B) as indicated. B B 6. Separate parts A, B, C, D as shown in the figure. A B C D 7. Place guide (A) on the inside part of the furniture door , upper and lower posi- tions as shown in the figure and mark the position of external holes. After hav- ing drilled holes, fix the guide with the screws supplied. 20[...]

11 Installation 9. Open the appliance door and the furni- ture door at 90°. Insert the small squar e (B) into guide (A). Put together the appliance door and the furniture door and mark the holes as indicated in the figure. Remove the squares and drill holes with Ø 2 mm at 8 mm from the outer edge of the door . Place the small square on the guide [...]

12 Installation P ower supply A correctly installed, earthed socket is r equired for the electrical sup- ply . The supply must have a fuse rating of at least 1 0 Amps. If the socket is not accessible once the appliance is built in, the electrical installation must include suitable means of isolating the appliance from the mains (e.g. a fused spur).[...]

13 1.The wire colour ed green and yellow must be connected to the termi- nal marked with the letter “E” or by the earth symbol or coloured green and yellow . 2.The wire colour ed blue must be connected to the terminal “N” or coloured black. 3.The wire colour ed brown must be connected to the terminal marked “L” or coloured r ed. 4.Upon [...]

14 Prior to Initial Start–Up Please clean the appliance interior and all accessories prior to initial start-up (see section: “Cleaning and Care”). ☞ Starting up and temper atur e regulation Important! Only use the appliance when built–in! ☞ 1. Connect the appliance to the mains electricity supply . When the refriger ator compartment doo[...]

15 Interior Accessories Stor age shelves Various glass stor age shelves are included with your appliance. The height of the storage shelves can be adjusted: ☞ 1. To do this pull the stor age shelf for- ward until it can be swivelled upwards or downwar ds and removed. 2. Please do the same in rever se to insert the shelf at a different height. Swi[...]

16 Corr ect stor age For physical reasons, ther e are differ ent temperatur e regions in the fridge. The coldest region is on the lowest stor age shelf. Warmer r egions are the top stor- age shelf, the vegetable drawer and the storage compartments on the door . The arrangement example shows at which places in the refriger ator suitable tem- peratur[...]

Cleaning and Car e For hygienic reasons the appliance interior , including interior acces- sories, should be cleaned regularly . Warning! • The appliance must not be connected to the mains during cleaning. Danger of electrical shock. Before cleaning switch the appliance off and remove the plug fr om the mains, or disconnect from the elec- tricity[...]

18 Symptom P ossible Cau se Remedy Appliance does not work. Appliance is not switched on. Mains plug is not plugged in or is loose. Fuse has blown or is defec- tive Socket is defective. Mains malfunctions are to be corrected by an electrician. Switch on the appliance. Insert mains plug. Check fuse, replace if nec- essary . Ener gy Saving Tips • D[...]

19 What to do if ... The compressor does not start immediately after changing the temperatur e setting. This is normal, no error has occurred. Water in the bottom of the cabinet. Water dr ain hole is blocked. See the “Cleaning and Care” section. The compressor starts after a period of time. Symptom P ossible Cau se Remedy Temper ature is set to[...]

20 Changing the light bulb Warning! Ther e is a risk of electric shocks! Before changing the light bulb , switch off the appliance and unplug it, or disconnect from the power supply . Light bulb data: 220-240 V, max. 15 W ☞ 1. To switch off the appliance, turn the thermostat knob to position "0". 2. Unplug the mains plug. 3. To change t[...]

21 Regulations , Standar ds, Guidelines This appliance was designed for household use and was manufactured in accordance with the appr opriate standards. The necessary measur es in accordance with appliance safety legislation r egulations (GSG), acci- dent prevention r egulations for refriger ation appliances (VBG 20) and the regulations of the Ger[...]

22 T echnical terminology • Refrigerant Liquids that can be used to a generate a cooling effect ar e known as refriger ants. They have a relatively low boiling-point, indeed so low , that the warmth from the food stor ed in the fridge or freezer can cause the refriger ant to boil and vaporise. • Refrigerant Cir cuit Closed circulation system th[...]

[...]

AEG Hausgeräte GmbH P ostfach 1 036 D-90327 Nürnberg http://www .aeg.hausgeraete.de © Electrolux plc 2004 2222 754-52 -00- 0304 Subject to change without notice[...]