Daewoo DWD-M1031 manuale d’uso

INSTRUCTION MANUAL DWD-M1031 W ashing Machine Instruction Manual CONTENTS Page A NO TE T O Y OU Thank you for buying a DAEWOO appliance. DAEWOO washers are easy to use, save time, and help you manage your home better. This manual contains valuable information about how to operate and maintain your washer properly and safely. Please read it carefull[...]

2 PA R TS AND FEA TURES The parts and features of your washer are illustrated on the page. Become familiar with all parts and features before using your washer. Accessories NO TE The drawings in the book may vary from your washer model. They are designed to show the different features of all models coverd by this book. Your model may not include al[...]

3 Save these instructions Your safety is important to us. To reduce the risk of fire, electrical shock, or injury when using your washer adhere to the following basic precautions. Understanding y our responsibilities • Do not use chlorine bleach and ammonia or acid(such as vinegar or rust remover) in the same wash. Hazardous fumes can form. • U[...]

4 Remo ving transit bolts 1. Before operating the washer, remove the transit bolts(3ea) along with the rubber. • If the bolts are not removed, it may cause heavy vibration, noise and malfunction. 2. Unscrew the 3 bolts with the 10mm hex wrench or spanner or cross-tip screwdriver. Keep the 3 bolts for a later time. • When the appliance is transp[...]

5 Drain system • Never forget to install drain hose before operating your washer. • Open the packing box, and the drain hose is tied at backside of washer. • If you use the laundry tub, Top of laundry tub must be at least 60cm high and no higher than 100cm from bottom of washer. • When installing the drain hose to tub(sink), secure it tight[...]

6 Recommended earthing method For your personal safety, this washer must be earthed. This washer is equipped with a power supply cord ‘A’ having a earthing plug ‘B’. To minimize possible shock hazard, the cord must be plugged into a mating earthing-type wall receptacle ‘C’. If a mating wall receptacle is not available, it is the persona[...]

7 • Drop items into washer loosely. Items should move easily through wash water for best cleaning and wrinkle-free results. • Load washer properly and select correct load size setting. Overloading and selecting a setting too small for the wash load can : - Cause poor cleaning - Increase wrinkling - Create excessive lint - Wear out items faster [...]

8 THE FUNCTIONS OF THE CONTR OL P ANEL Pr ogram selector For switching the washing machine on and off and for selecting the program. Can be rotated in both direction. Even if the program selector rotates while the program is running, the program is not changed (except for off ) . (All program is electronically controlled by PCB) Indicator light The[...]

9 PR OGRAMS AND FUNCTIONS Pr ograms and functions Program Proper Temp. Cold 30°C 40°C 60°C 60°C/Pre 95°C 30°C 30°C Cold 30°C 40°C 60°C 60°C/Pre Cold 30°C 40°C 30°C Cold 30°C 40°C Degree of soiling Lightly soiled Normally to heavily soiled Heavily soiled Normally soiled Lightly soiled Normally soiled Lightly soiled Normally to heavil[...]

10 W ASHING PR OCEDURE AND PR OGRAM SELECTION W ashing Procedure • Turn the program selector to the desired program The indicator light of Start/Hold button is on. • If required, press the button(s) for option(s). The indicator light of the selected option button is on. • If you select 'Rinse Hold' button, led of 'Rinse Hold&ap[...]

11 Changing the program If you have accidentally selected the wrong program, follows next procedure. Using Time delay Firstly, you select the desired program and option(s). • Press the Start/Hold button. The selected program stops and the indicator light of Start/Hold button is not twinkle but on. • Turn the program selector to OFF and reselect[...]

12 MAINTENANCE Proper care of your washer can extend its life. This section explains how to care for your washer properly and safely. Cleaning y our washer Winter storage or moving care Install and store your washer where it will not freeze. Because some water may stay in the hoses, freezing can damage your washer. If you store or move your washer [...]

13 HO W T O CLEAN THE FIL TER Cleaning the water inlet filter • Clean the filter when water leaks from the water inlet. Cleaning the drain filter • This drain filter is used to screen the foreign stuffs such as threads, coins, pins, buttons etc.. • If the drain filter is not cleaned at proper time(every 10 times of use), drain problem could b[...]

14 Stained, heavily-soiled, or greasy items may need to be prewashed or soaked for best results. Soaking helps remove protein-type stains like blood, milk or grass. Prewashing helps loosen soil before washing. Stain remo val rules • Use warm water for soaking or prewashing stained laundry. Hot water can set stains. • Most stains are easier to r[...]

Most problems are easily solved if you understand the cause. Check the following list for problem before calling for service. 15 TR OUBLE SHOO TING Program dose not start. Water dose not enter the washing machine. Washing machine is not drain. Washing machine is not spin. Spin result is unsatisfactory. Foam come out of the detergent case. Serious n[...]

16 Power Consumption Dimension (mm) Maximum mass of textile (kg) Unit Weight (kg) Standard Water Consumption Spin Speed (RPM) Operating Water Pressure 220V~240V/50Hz (2000W) 595x440x850 (WxDxH) 6 kg 54(Net) / 57(Gross) 42 " 1000/800/600 0.03MPa ~ 0.8MPa (0.3kgf/cm 2 ~ 8kgf/cm 2 ) MODEL DWD-M1031 SPECIFICA TION[...]

# # $ $ % % $ $ & & ' ' ! ! ( ( ) ) * * + + , , $ $ # # * * - - ! ! $ $ ' ' ( ( . . /0 123 456 789 :;<= >? ABOUT THIS MANU AL ABOUT THIS MANU AL @A BCD E FGH I+*J&& K L M L N.!O&I*P IQNRSTUS V.!O&I*P IJIQOSTUS SW XTTY.TZ.S[Q] B^ _` XW DaU W >W [W bcd e e f f 6D O*O&!ghi!jkS7lm n o p #$%$ &am[...]