Daewoo DTS - 42 manuale d’uso

PLASMA TELEVISION USER MANUAL DTS-42 Proper use guarantees product life. Before using the product, be advised that you read this user manual well and try to operate it.[...]

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE. REFER SERVICING T O QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol is lntended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of [...]

Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a damp cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8 . Do not install near a[...]

4 This User Manual presents safety precautions and how to use the product. After reading it thoroughly , use the product safely . Keep this manual where the user can see it easily . Failure to comply with warnings and cautions for the safe use of electric appliances may cause fire or human injury . • 42” VGA wide Plasma Panel • Built in Anal[...]

FCC RF INTERFERENCE ST FCC RF INTERFERENCE ST A A TEMENT TEMENT NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,[...]

Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. If anything strange happens, unplug this product from the wall outlet. • Do not disassemble or replace any parts of the TV . Refer to a qualified service personnel for repair . Safety Precautions 6 W ARNING Y ou can be de[...]

7 Do not open the cover (or back) because high voltage is present within the TV enclosure. It may cause electric shock. Never push any kind of objects into this product through openings at the back of TV. It may cause fire or electric shock. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such [...]

8 Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. Safety Precautions Power Installation CAUTION Y ou can be injured, or this product or any other of your property can be damaged if you don’t follow instructions. When moving your TV, remove the power plug, antenna, and c[...]

9 9 During Use Do not wipe the TV using a cloth damped with chemicals (benzene, thinner, etc.). TV appearance may be marred. (Unplug the power plug and wipe with soft cloth.) Do not place any object or cover on the TV. In an event of improper ventilation, the TV will be overheated causing fire. Do not place heavy objects or heat sources on the pow[...]

10 VIDE O/ DVD S AT TV CATV DISP LAY MU LTIM ED IA T V/VIDEO CH CH V O L V O L Z O O M + Z O O M - M ENU P R E V C H S C R E E N S I Z E M U TE C APTIO N F.F/ SLO W PLAY F.R /SLOW R EC S TOP PAU SE PR EV O P EN /C LO SE NEXT PIC TU RE MO D E SO UN D M OD E STILL P O W E R M T S A D D / E R A S E S L E E P Remote Control 1 UNIT Component Cable 1 UNI[...]

11 Note The following items are optional accessories. Refer purchasing optional accessories from Daewoo Electronics Local retailer or the retailer from where you purchased the unit. Optional Accessories T able T op Stand Speakers DTS-42SP - Speaker Main Unit Dimension : 100(W) x 628(H) x 83(D) mm 39.37(W) x 24.72(H) x 3.27(D) inch - Dimension Inclu[...]

[...]

13 6 • Safety Precautions 10 • Checking Accessories 14 • Panel Controls 15 • Remote control 16 • Remote Control Setup PREP ARA TION CONNECTION 17 • Antenna Connection 20 • T o Watch TV 22 • Channel Setup 28 • W atching Digital Broadcasts 30 • W atching Cable Broadcasts 32 • W atching Satellite Broadcasts 34 • W atching a DVD[...]

Panel Controls 14 Front Panel, Back Panel, Remote Control * Items having same names on Plasma television and the remote control would function in exactly the same way . Front Rear ON/OFF • Power control sensor • Power Standby: Red - Standby Green - ON • Power button Select when adjusting volume or select/adjust “ MENU. ” Press when moving[...]

15 Remote Control When Using Remote Control: • Be sure not to allow the Remote Control to drop or to become wet. • Keep it away from hot or moist locations. Installing the Batteries in your Remote Control: • Push to open the cover of the remote controller • Set the batteries in the battery cell after checking the electrode, and then shut th[...]

16 Remote Control Setup - The remote control provided is designed to operate the Daewoo PDP set. - However, using the remote control, you can control the Cable Converter, VCR , DVD and Satellite Broadcasting Receiver of other brands after setting up the remote control. HOW TO SET UP THE REMOTE CONTROL FOR US ING OTHER DEVICES . • Turn on the Devi[...]

Antenna Connection 17 1. Connect the feeder cable of the antenna to the combining adapter . 2. Connect the combining adapter to the antenna input at the back of the TV set. WHEN THE IMAGE IS NOT CLEAR Unclear screen image and bad reception may be a cause of wrong antenna connection. Be sure to check its direction and place when installing. WHEN USI[...]

CTV Antenna Connection 18 TV Antenna installation may be found in most. When a coaxial cable is used Plug the coaxial cable to the antenna socket, and fi x it fi rmly. It is recommended to use the provided coaxial cable. When a feeder cable is used ANT/CABLE 1 ANT/CABLE 1 Provided coaxial cable[...]

19 Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses Single Antenna Connection. Separate Antenna Connection. VHF Antenna UHF Antenna ANT/CABLE 1 ANT/CABLE 1 Outdoor Antenna Connection[...]

T o W atch TV 20 - The buttons on the keypad in the PDP unit, which have the same name as those on the remote controller, perform the same function as the remote controller. VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .F/SLOW PLA Y F .R/SLOW REC STO[...]

21 Press the “ON/OFF” button. POWER • Press the “ON/OFF” button of the PDP set. • The main power lamp turns on in red color. • Press the "POWER" button of the remote control or any button in the keypad of the main body. • The LED of the PDP set turns on in “green” color and the set turns on. Select Channel. CH CH V O L[...]

Channel Setup 22 VIDEO / DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E M UTE CAPTION F .F/SLOW PLA Y F .R/SLOW REC STOP P AUSE PREV OPEN/CLOSE PIC P O W E R - This is the function for the TV to memorize the broadcasting channels. If the Auto Setup is done, you can simply ?[...]

23 Select the [Auto Search]. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • Select the “ Auto Search ” with the “ CH ” button. Press the “VOL ” button. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • By pressing the “ VOL ” button automatically searches OnAir Channel as [...]

Additional Channel Memory • This is method for additionally memorizing channels not memorized due to weak broadcasting signal. • This function is available even in the [Menu] - [Channel] - [ADD/ERASE]. VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F[...]

25 Erase of Memorized Channel • This is function to erase unnecessary memorized channel. • This function is available even in the [Menu] - [Channel] - [ADD/ERASE]. VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .F/SLOW PLA Y F .R/SLOW REC STOP P AU[...]

26 Fine T une - If you are unable to get a good picture or sound because of a poor signal reception, it is possible to adjust it with the Fine Tune feature.. VIDEO / DVD SA T TV CA TV DISPLA Y M UL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E M UTE CAPTION F .F/SLOW PLA Y F .R/SLOW REC STOP P AUSE PREV[...]

27 Select “Air/Cable” in [Ch Mode]. • This function is used for selecting “ Air TV ” and “ Cable TV ” • The screen is changed to “ Air TV ” and “ Cable TV ” whenever pressing the “ VOL ” button. Move Adjust MENU Exit Picture Screen Sound Features Channel Ch Mode Channel Memory Fine Tune Auto Search Air 42 Add 0 2 Select [...]

W atching Digital Broadcasts • T o watch digital broadcasts: - Purchase a separate digital Broadcasting Receiver(SET -TOP BOX) - Connect the PDP to a Digital Broadcasting Receiver as shown right. 28 W atching Digital Broadcasts VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E [...]

29 Input Select MUL TIMEDIA • Select [Component 1 or Component 2] by pressing the “ Multimedia ” button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “ Multimedia ” button, different input modes appear . The sequence is as follows: Select a Desired Channel and Function • [...]

W atching Cable Broadcasts • T o watch cable broadcasts, subscribe to your local Cable TV Broadcasting, and then connect a cable Broadcasting Receiver TV to the PDP as shown right. W atching Cable Broadcasts 30 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CA[...]

31 Input Select TV/VIDEO • Select [Video 1 or Video 2] by pressing the TV/VIDEO button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “ TV/VIDEO ” button, different input modes appear. The sequence is as follows: Select a Desired Channel and Function • Select a desired channel[...]

W atching Satellite Broadcasts • T o watch satellite broadcasting, subscribe to Digital Satellite Broadcasting, then connect satellite Broadcasting Receiver to the PDP as shown right. W atching Satellite Broadcasts 32 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E [...]

33 Input Select TV/VIDEO • Select [Video 1 or Video 2] by pressing the TV/VIDEO button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press “ TV/VIDEO ” button, a different input mode appears. The sequence is as follows: Select a Desired Channel and Function • Select a desired channel a[...]

W atching a DVD Image • Component Input is set to 480i and 480p mode. • Connect the cable from the DVD Video Output (Y , Pb/Cb, Pr/Cr) to the Component Input at the back of PDP , and connect the cable from DVD Audio output (Left, Right) to the Audio Input at the back of PDP . W atching a DVD Image 34 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDI[...]

35 Input Select MUL TIMEDIA • Select [Component 1 or Component 2, Video1, V ideo2] by pressing the “ MUL TIMEDIA ” or “ TV/VIDEO ” button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the PDP set. • Each time you press the “ MUL TIMEDIA ” or “ TV/VIDEO ” button, a different input mode appears. The sequen[...]

W atching a VCR Image • V ideo can use either the video terminal or the S-video terminal. W atching a VCR Image 36 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .F/SLOW PLA Y F .R/SLOW REC STOP P AUSE PREV OPEN/CLOSE NEXT PICTURE MODE SOUND MODE STI[...]

37 Input Select TV/VIDEO • Select [V ideo 1 or Video 2] by pressing the “ TV/VIDEO ” button of Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “ TV/VIDEO ” button, a different input mode appears. The sequence is as follows: Select a Desired Title and Function • Select a desired ti[...]

W atching a Camcorder/Game Console Image • Enjoy images recorded by camcorder or the game console after connecting to the PDP . W atching a Camcorder/Game Console Image 38 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .F/SLOW PLA Y F .R/SLOW REC STO[...]

39 Input Select TV/VIDEO • Select [V ideo 1 or Video 2] by pressing the “ TV/VIDEO ” button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “ TV/VIDEO ” button, a different input mode appears. The sequence is as follows: Select Function • Select the Function by using the Re[...]

Connecting PC • This product supports resolution of VGA, SVGA, XGA, and SXGA. • Before connecting a PC to the PDP , be sure to adjust the resolution of PC. Connecting PC(15pin D-sub) 40 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .F/SLOW PLA Y F[...]

41 Input Select MUL TIMEDIA • Select [PC] by pressing the “ MUL TIMEDIA ” button of the Remote Control or PDP unit. • Each time you press the “ MUL TIMEDIA ” button, a different input mode appears. The sequence is as follows: Enjoy Dynamic Ultra Screen TV by Using PC’ s Keyboard or Mouse. 4 5 Press the Power Buttons. • T urn on the [...]

Connecting PC • This product supports resolution of VGA, SVGA, XGA, SXGA. • Before connecting a PC to the PDP , be sure to adjust the resolution of PC. • This product is supported by Plug and Play only at DVI. Connecting PC(DVI) 42 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S [...]

43 Input Select MUL TIMEDIA • Select [DVI] by pressing the “ MUL TIMEDIA ” button of the Remote Control or PDP unit. • Each time you press the “ MUL TIMEDIA ” button, a different input mode appears. The sequence is as follows: Enjoy Dynamic Ultra Screen TV by Using PC’ s Keyboard or Mouse. 4 5 Press the Power Buttons. • T urn on the[...]

44 PC and DVI Input Resolution A vailable in PDP • Depending on graphic card, problems like no signal detected or line noises can happen. If these problems happen, contact the graphic card company for help. Resolution H Freq. (KHz) V Freq. (Hz) Remark DVI PC 37.861 31.469 37.861 37.500 43.269 31.469 37.927 35.156 37.879 48.077 46.875 53.674 48.36[...]

Selecting Picture Mode • Select the Picture mode that is appropriately set depending on the kinds of pictures, and enjoy them. Selecting Picture Mode PICTURE MODE • Press the [PICTURE MODE] on the Remote Control. • While pressing the [PICTURE MODE] for the fi rst time, the current PICTURE MODE will be displayed. Each Press of the Button Will[...]

Customizing Picture • Y ou can adjust the color tone and brightness to your preference. Customizing Picture 46 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .F/SLOW PLA Y F .R/SLOW REC STOP P AUSE PREV OPEN/CLOSE NEXT PICTURE MODE SOUND MODE STILL P[...]

Select User Mode Adjustments Picture Condition Adjustments • Press the “ VOL ” buttons to adjust the picture at your preference. 4 5 Move Adjust MENU Exit Normal 30 60 40 32 48 Picture Screen Sound Features Channel Mode Brightness Contrast Color Tint Sharpness Color T emp. User Move Select MENU Exit Normal 30 60 40 32 48 Picture Screen Sound [...]

Adjusting Screen Size • Y ou can adjust screen size or aspect ratio as desired. Adjusting Screen Size 48 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .F/SLOW PLA Y F .R/SLOW REC STOP P AUSE PREV OPEN/CLOSE NEXT PICTURE MODE SOUND MODE STILL POWER M[...]

49 Press the MENU Button. • Press the [MENU] button on the Remote Control. Select [Screen]. • Press the Channel “ CH ” button to select [Screen]. Select the [Screen Size]. • Enter the sub menu by pressing “ VOL ” button. • Press the V olume “ VOL ” buttons to select [Screen Size]. 3 1 2 Adjusting from MENU Screen Move Select MEN[...]

Adjusting Screen Position and Size • Y ou can adjust the screen position and size as desired. VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .F/SLOW PLA Y F .R/SLOW REC STOP P AUSE PREV OPEN/CLOSE NEXT PICTURE MODE SOUND MODE STILL POWER MTS ADD/ ERA[...]

51 Press the V olume “ V O L ” button. • Press the V olume “ VOL ” button to enter the sub menu of [Screen]. • While you are in [Screen] mode, press the “ CH ” button to select a desired item, and then, adjust the value by pressing the “ VOL ” . 3 Move Adjust MENU Exit Picture Screen Sound Features Channel H. Size V . Size H. Po[...]

VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .F/SLOW PLA Y F .R/SLOW REC STOP P AUSE PREV OPEN/CLOSE NEXT PICTURE MODE SOUND MODE STILL POWER MTS ADD/ ERASE SLEEP Press the “ZOOM+” Button. • Press the “ ZOOM+ ” button to show currently sele[...]

Move the Screen Position. • While you are in the ‘ Zoom ’ mode, press the “ CH ” and “ VOL ” buttons to move screen stepwise up/down and left/right, respectively . 2 53 NOTES: 1) When the screen is enlarged, the pixel of the screen can become thick and dim. 2) When only subtitle of zoom level remains, you can scroll the image. If subt[...]

VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .F/SLOW PLA Y F .R/SLOW REC STOP P AUSE PREV OPEN/CLOSE NEXT PICTURE MODE SOUND MODE STILL POWER MTS ADD/ ERASE SLEEP Press the “STILL” Button. • If you wish to freeze a picture, press the “ STILL [...]

Adjusting Auto Sound Mode • Enjoy various sound modes by selecting your favorite Sound Mode depending on the kinds of moving pictures. Adjusting Auto Sound Mode 55 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .F/SLOW PLA Y F .R/SLOW REC STOP P AUSE[...]

Customizing Sound Mode • This feature allows the user to adjust at his preference. Customizing Sound Mode 56 Press the “ C H ” button. • Select [Sound] by pressing the “ CH ” button, then press the “ VOL ” button to display the following. Select SOUND BALANCE. • Select Sound [Balance] by the “ VOL ” button, then adjust it. •[...]

Select the Effect Mode. • Select [Ef fect] by pressing the “ CH ” buttons, then select ON/OFF by pressing the “ VOL ” button. • [Effect]: Used to emphasize stereo ef fect. Select the Sound Mode. 4 5 Move Adjust MENU Exit Mono Off Normal 0 0 0 0 0 Picture Screen Sound Features Channel Balance Effect MTS AV C Mode 120Hz 500Hz 1.5kHz 5kHz [...]

Selecting INPUT SIGNAL 58 Press the INPUT SELECT Button. MUL TIMEDIA TV/VIDEO • Press the “ TV/VIDEO ” and “ MUL TIMEDIA ” button on the Remote Control or the PDP Display to select desired input signal. • Each time you press the “ TV/VIDEO ” or “ MUL TIMEDIA ” button, a different screen mode appears. The sequence used is as foll[...]

59 NOTES: 1) If an external device is not connected or INPUT signal is not applied, W arning Message ( “ No Signal ” ) would be displayed. 2) In this case, check if external device is connected and/or terminal connection is properly done. 3) Also, you can select input using [INPUT SELECT] button in the keypad of the pdp set. The used sequence i[...]

Checking the Current Input Signal • Used to check the INPUT signal mode, resolution, frequency(video only), etc. of the current screen. Checking the Current Input Signal 60 Press the “DISPLA Y” Button. DISPLA Y • Press the “ DISPLA Y ” button on the Remote Control. 1 VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O[...]

Menu Background and Language Settings • Used to select transparent of MENU background and language used in MENU. Press the MENU Button. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • The MENU screen will be displayed as below . Press the “ C H ” Button. • Select [Features] by Pressing the “ CH ” button. S[...]

VIDEO/ DVD SA T TV CA TV DISPLA Y MUL TIMEDIA TV/VIDEO CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E MUTE CAPTION F .F/SLOW PLA Y F .R/SLOW REC STOP P AUSE PREV OPEN/CLOSE NEXT PICTURE MODE SOUND MODE STILL POWER MTS ADD/ ERASE SLEEP MENU Background, Language and Key pad Lock Settings Select LANGUAGE by using the “ C [...]

63 MGDI Demo • When [MGDI] is set to Demo mode, Half of screen is [MGDI] ON and the other half is [MGDI] OFF . • As [MGDI] is of f, the sharpness of the Picture mode cannot be controlled. Press the MENU Button. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • The MENU screen will be displayed as below . Select Feat[...]

POWER/ST ANDBY Indicator Front panel LED lights • When the AC power is on : Green. • When the AC power is in the standby mode : Red. 64 Auto Power Setting Auto Power Setting • Select the [Auto Power] by pressing the “ CH ” button from [Features]. • You can select [Auto Power] ON and OFF mode by using the “ VOL ” button. 4 Move Adjus[...]

Closed Caption Setting CAPTION • Press the “ CAPTION ” button on the Remote Control. • Whenever pressing the “ CAPTION ” button, caption mode is changed as follow. Closed Caption Setting in the Menu. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • Press the Menu Button. • The MENU screen will be displaye[...]

Caption Box Setting • Black : Background of the caption box is black. • T ransparent : Background of the caption box is T ransparent. 66 Closed Caption Setting Select Features CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • Select [Features] by pressing the “ CH ” button. Select Closed Caption • Enter the su[...]

Press the MENU Button. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • The MENU screen will be displayed as below . Select Features CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • Select [Features] by the “ CH ” button. Select Time Setting CH CH V O L V O L Z O O M + Z O O M - MENU P[...]

Clock(current time) Setting • The “ Current time ” must be set up ahead of setting up other time memories. 68 T ime Setting Off Time and W ake T ime settings. • Select Functions by pressing the “ CH ” button. First, set [Clock]- current time, and then Y ou can setup off-time and wake time. • [Clock] : Enter clock setting menu by press[...]

ISM • Image sticking minimization. • Displaying a still image like PC input for a long time causes part image sticking in the panel • The ISM function minimize this effect. Image Sticking Minimization(ISM) 69 Press the MENU Button. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • The MENU screen will be displayed[...]

70 Image Sticking Minimization(ISM) Select Functions. • Every press of the “ VOL ” button after select function by the “ CH ” button would switch between ON/OFF . 4 Move Adjust MENU Exit Picture Screen Sound Features Channel ISM Pixel Shift Low Bright Off Off CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E NOTES[...]

Parental Lock • When “ Parental Lock ” is on, the locked channels are not available on the screen. Parental Lock Setting 71 Press the MENU Button. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • The MENU screen will be displayed as below . Select Features • Select [Features] by pressing the “ CH ” button. [...]

New Password setting New Password setting menu is displayed at fi rst use. Set New Password for using Parental Lock menu. 72 Parental Lock Setting Press “Password”. • Press Password by using number 0~9. Caution) If using your password, remember it. It is needed for continuous use of this function hereafter . On – Off of the Parental Contro[...]

73 MUTE Move Select MENU Exit Picture Screen Sound Features Channel Parental Control Parental Lock TV GuidLines Movie Retings No Ratings Ext. Sources Change Password Unblock Off Block • Rating of movie is setup even in movie, videotape and other media objects including TV program. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N[...]

74 Parental Lock Setting “Change Password”. • In the initial purchase of TV set, password is set to blank. In continuous use of Parental Control, you need to change your password. • If pressing the “ VOL ” button after selecting password, the second screen of below drawing appears. Here, newly enter your unique password by using number [...]

75 Back to Initialization • Y ou can restore the values of the adjustment setting made in the MENU to factory settings. Initialize Setting Press the MENU Button. CH CH V O L V O L Z O O M + Z O O M - MENU P R E V C H S C R E E N S I Z E • The MENU screen will be displayed as below . Select Features • Select [Features] by the “ CH ” button[...]

76 When [INITIALIZA TION] is completed: 1) When [INITIALIZATION] is completed, those values that have been set in the User Mode of [SCREEN MODE] and [SOUND MODE] will be returned to the factory preset values. 2) Once initialized, you can not undo. 3) The items in the [SCREEN] Menu in PC or DVI INPUT are also initialized (i.e., H. Size, V. Size, H. [...]

77 Setting Sleep Timer • SLEEP TIMER turns the PDP off after a preset time. Press the “SLEEP” Button. SLEEP • Press the “ SLEEP ” button on the Remote Control. • Pressing the “ SLEEP ” button fi rst time will display the current setting for SLEEP TIMER. • T o cancel the SLEEP TIMER, press the “ SLEEP ” button to select ‘ [...]

Before Requesting Service 78 Before Requesting for Service St yo mm ps C h e c k s A c t i o n • There are empty spots at the top and the bottom area of the screen. • Check if the screen size of an image is wider than 16:9 aspect ratio (theater screen size). • When video screen is wider than 16:9 aspect ratio, you may see dark areas at the to[...]

79 SPECIFICA TIONS In the event that the product has been submerged in the water in rainy season: Immediately wash it with clean water, and dry it in a shadow place, then call for service from the nearest Daewoo Service Center. Never plug the Power Cord since there is risk of electric shock and damage of the product. * Appearance and speci fi cati[...]