D-Link DWL-G510 manuale d’uso

Manual 802.1 1g (2.4GHz) DWL-G510 D-Link Air Plus G TM Wireless PCI Adapter Building Networks for People[...]

2 Content s Package Contents ................................................................................ 3 Introduction ............................................................................................ 4 Wireless Basics .................................................................................... 5 Installation Considerations[...]

3 Content s of Package: D-Link Air Plus G DWL-G510 802.1 1g (2.4GHz) Wireless PCI Adapter Manual, W arranty and Drivers on CD Printed Quick Installation Guide Package Content s If any of the above items are missing, please contact your reseller . System Requirement s for Configuration:    An 802.1 1g or 802.1 1b access point ( for Infrastr[...]

4 Features Comp atible with 802.1 1b and 802.1 1g Devices - Fully compatible with the IEEE 802.1 1b and 802.1 1g standards, the DWL-G510 can connect with existing 802.1 1b- or 802.1 1g- compliant routers, access points and cards. That means you can still communicate with colleagues and friends while you have the ability to link to even more wireles[...]

5 Wireless Basics Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, [...]

6 D-Link Air Plus TM G DI-624 Wireless Router Wireless Basics (continued) S t andards-Based T echnology The DWL-G510 Wireless PCI Adapter utilizes the 802.1 1b and the 802.1 1g standards. The IEEE 802.1 1g standard is an extension of the 802.1 1b standard. It increases the data rate up to 54 Mbp s within the 2.4GHz band, utilizing OFDM technology .[...]

7 Wireless Basics (continued) Inst allation Considerations The D-Link Air Plus G DWL-G510 lets you access your network, using a wireless connection, from virtually anywhere within its operating range. Keep in mind, however , that the number , thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, ma[...]

8 Getting S t arted On the following pages we will show you an example of an Infrastructure Network and an Ad-Hoc Network . An Infrastructure network contains an access point or a wireless router . The Infrastructure Network example shown on the following page contains the following D-Link network devices (your existing network may be comprised of [...]

9 Getting S t arted (continued) Setting up a Wireless Infrastructure Network For a typical wireless setup at home (as shown above), please do the following: Y ou will need broadband Internet access (a Cable or DSL-subscriber line into your home or office). Consult with your Cable or DSL provider for proper installation of the modem. Connect the Cab[...]

10 Getting S t arted (continued) Setting up a Wireless Ad-Hoc Network Install the D-Link DWL-G510 Wireless PCI Adapter into one desktop computer . (See the Quick Installation Guide included with the product for installation instructions.) Install another DWL-G510 into a desktop computer . (See the Quick Installation Guide included with the product.[...]

11 Select the Wireless Networks tab. Uncheck the box in the properties window that enables windows configuration. D-Link Air Plus TM G DWL-G510 uses the Configuration Utility as the management software. The utility provides the user an easy interface to change any settings related to the wireless adapter . After you have completed the inst allation[...]

12 Status: Displays the MAC address of the access point that is associated with the DWL- G510. SSID: The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is set to default . Tx Rate: Tx Rate settings are automatically determined for an optimal speed up to a maximum of 54Mbps. Channel: The channel selecti[...]

13 SSID: Service Set Identifier is a name that identifies a wireless network. Access points and wireless devices attempting to connect to a specific WLAN (Wireless Local Area Network) must use the same SSID.The default setting is default . Wireless Mode: Click on the pull-down menu; select from the following options: Infrastructure - Connecting to [...]

14 Configuration Utility (continued) D-Link Air Plus DWL-650+ 2.4GHz Wireless Cardbus Adapter Encryption Data Encryption – Enable WEP encryption by clicking on the box. Auth. mode – Choose one of the following Authorization modes: Open Authentication –Communicates the key across the network. Shared Authentication –Allows communication only [...]

15 Available Networks The top section of the window displays the Available Networks. Scroll up and down the list and highlight the network to which you wish to connect. Click on the Connect button. Profile In the lower half of the screen, you can manage the profiles that you have created for the wireless network at home, at the office and in public[...]

16 Configuration Utility (continued) Site Survey > Add, Connect or Properties In this window you can configure all the properties of a profile in order to connect with a network of your choice. After you have entered your changes in this window , click OK to save the changes.[...]

17 The About screen gives you information about the F irmware and Utility V ersions of the DWL-G510. Configuration Utility (continued) About[...]

18 In this section you will learn how to establish a network at home or work, using Microsoft Windows XP . Note: Please refer to websites such as http://www .homenethelp.com and http://www .microsof t.com/windows2000 for information about networking computers using Windows 2000/Me /98SE. Go to Start>Control Panel>Network Connections. Select S[...]

19 Please follow all the instructions in this window: Networking Basics (continued) Click Next. In the following window , select the best description of your computer . If your computer connects to the Internet through a router , select the second option as shown. Click Next.[...]

20 Enter a Computer description and a Computer name (optional.) Networking Basics (continued) Click Next. Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next.[...]

21 Please wait while the Network Setup Wizard applies the changes. Networking Basics (continued) When the changes are complete, click Next . Please wait while the Network Setup Wizard configures the computer . This may take a few minutes.[...]

22 Networking Basics (continued) In the window below , select the option that fit s your needs. In this example, Create a Network Setup Disk has been selected. Y ou will run this disk on each of the computers on your network. Click Next . Insert a disk into the Floppy Disk Drive, in this case drive A. Click Next.[...]

23 Networking Basics (continued) Please read the information under Here’ s how in the screen below . After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. T o continue, click Next.[...]

24 Networking Basics (continued) Please read the information on this screen, then click Finish to complete the Network Setup Wizard . The new settings will take ef fect when you restart the computer . Click Ye s to restart the computer . Y ou have completed configuring this computer . Next, you will need to run the Network Setup Disk on all the oth[...]

25 Networking Basics (continued) Naming your Computer T o name your computer in Windows XP , please follow these directions: Click Start (in the lower left corner of the screen). Right-click on My Computer . Select Properties .    Select the Computer Name T ab in the System Properties window . Y ou may enter a Com- puter Description if you[...]

26 Networking Basics (continued) Naming your Computer Checking the IP Address in W indows XP The wireless adapter-equipped computers in your network must be in the same IP ad- dress range (see Getting St arted in this manual for a definition of IP address range.) T o check on the IP address of the adapter , please do the following: Right-click on t[...]

27 Networking Basics (continued) Checking the IP Address in W indows XP This window will appear . Click the Support tab. Click Close .   Assigning a S tatic IP Address in W indows XP/2000 Note: DHCP-capable routers will automatically assign IP addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technolo[...]

28 Networking Basics (continued) Assigning a S tatic IP Address in W indows XP/2000  Double-click on Network Connections .   Double-click on Properties . Right-click on Local Area Connections .[...]

29 Networking Basics (continued) Y ou have completed the assignment of a static IP address. (Y ou do not need to assign a static IP address if you have a DHCP-capable gateway/router.) Click on Internet Protocol (TCP/IP) Click Properties .   IP Address: e.g., 192.168.0.2 Subnet Mask: 255.255.255.0 Default Gateway: Enter the LAN IP address of t[...]

30 Networking Basics (continued) Checking the Wireless Connection by Pinging in Windows XP/2000 Checking the Wireless Connection by Pinging in Windows Me/98SE Go to Start > Run > type cmd . A window similar to this one will appear . T ype ping xxx.xxx.xxx.xxx , where xxx is the IP address of the wireless router or access point. A good wireles[...]

31 1. How do I check that the drivers for the DWL-G510 are inst alled properly? Click Device Manager .  Select the Hardware Ta b .  T roubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DWL-G510. Read the following descriptions if you are having problems. (The examples below a[...]

32 T roubleshooting (continued)     Double-click on Network Adapters. Right-click on D-Link DWL-G510 Wireless PCI Adapter . Select Properties to check that the drivers are in- stalled properly . Click OK . D-Link Air Pro DWL-AB650 Wireless Cardbus Adapter  Look under Device status to check that the device is working properly . D-Link[...]

33 T roubleshooting (continued) Make sure that the DWL-G510 Wireless PCI Adapter is properly seated in the computer’s PCI slot. If Windows does not detect the hardware upon insertion of the adapter , make sure to completely remove drivers that were previously loaded. T o remove the drivers, do the following:   5. What should I do when the c[...]

34 Check that the LED indicators for the broadband modem are indicating normal activity . If not, there may be a problem with the broadband connection. Check that the LED indicators on the wireless router are functioning properly . If not, check that the AC power and Ethernet cables are firmly connected. Check that the IP address, subnet mask, gate[...]

35 Check that the Network Connection for the wireless client is configured properly . Select AP (Infrastructure) when connecting to an access point and select Ad-Hoc mode when connecting without an access point. Double- click on the WLAN icon in the taskbar > click on Configuration to change the settings for the wireless adapter . If Security is[...]

36 T echnical S pecifications IEEE 802.1 1b IEEE 802.1 1g IEEE 802.1 1  Standards   T emperature Operating: 0ºC to 55ºC (32ºF to 131ºF)  5%-95% maximum, non-condensing Humidity:  W arranty: 3 years  0.12 lb. (55 grams)  Weight: Antenna T ype: Built-in diversity patch antenna, 2dBi gain (max.)  PCI 2.2 PCI Standard:  S[...]

37 T echnical S pecifications (continued) Power: 3.3 V olt ± 5%  Dat a Modulation T ype: DBPSK, DQPSK, CCK and OFDM (BPSK/QPSK/16-QAM/64-QAM)  Channels: 1-1 1 channels (North America)  Power Consumption: 802.1 1g: TX 550mA, RX 330mA, S tandby 300mA 802.1 1b: TX 580mA, RX 350mA, S tandby 300mA  Regulation Compliant: Wireless: Wi-Fi US: [...]

38 T echnical S pecifications (continued) *Environmental factors may adversely affect range. Modulation T echnology: Orthogonal Frequency Division Multiplexing (OFDM)  15dBm ± 2dB T ransmitter Output Power:  Data Rates: With Automatic Fallback 54Mbps; 48Mbp s; 36Mbps; 24Mbps; 18Mbps; 12Mbp s; 1 1Mbps; 9Mbps; 6Mbps; 5.5Mbps; 2Mbps; 1Mbps  [...]

39 T echnical Support Y ou can find sof tware updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United S tates and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phon[...]

40 Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: • D-Link or its authorized reseller or distributor and • Products purchased and delivered within the fifty states of the United S tat[...]

41 • The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same. • The original product owner must obtain a Return Material Authorization (“RMA”) number from the Authorized D-Link Service Office and, if reques[...]

42 Governing Law : This Limited W arranty shall be governed by the laws of the S tate of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply . This limited warranty provides specific legal [...]