Crestron CHV-TSTATRF manuale d’uso

Crestron CHV-TSTATRF infiNET™ Thermostat Operations & Installation Guide[...]

This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, pr oduct names and tradem arks are the proper ty of their respective owners. ©2008 Crestron Electronics, Inc.[...]

Crestron CHV-TSTATRF infiNET™ Thermostat Contents infiNET™ Thermostat: CHV-TSTATRF 1 Introduc tion ................................................................................................................... ............ 1 Features and Functions .............................................................................................[...]

[...]

Crestron CHV-TSTATRF infiNET™ Thermostat infiNET™ Thermostat: CHV-TSTATRF Introduction The CHV-TSTATRF is a wireless networked t hermostat featuring infi NET™ wireless technology. The CHV- TSTATRF is designed to be installed easily in place of a conventional thermostat without re quiring additional cont rol wiring. Although it can be used as [...]

infiNET™ Thermostat Crestron CHV-TSTATRF Heat/Cool Thermostat The CHV-TSTATRF is designed for heati ng and cooling control of baseboard, forced air, heat pump and dual-fuel h eat pum p HVAC systems. The large backlit LCD display provides a clear vi ew of current temperat ure, setpoint, system mode, fan mode, system status and setup functions. C l[...]

Crestron CHV-TSTATRF infiNET™ Thermostat Specifications Specifications for the CHV-TSTATRF are listed in th e following table. CHV-TSTATRF Specifications SPECIFICATION DETAILS Wireless C2N-MNETGW gateway/transceiver required (sold separately) RF Transceiver Two-w ay RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.6 MHz), IEEE 802.15.4 compliant RF O[...]

infiNET™ Thermostat Crestron CHV-TSTATRF CHV-TSTATRF Specifications (Continued) SPECIFICATION DETAILS Weight 6.7 oz (189.9 g) Available Models CHV-TSTAT RFA infiNET Thermostat, Almond CHV-TSTAT RFB infiNET Thermostat, Black CHV-TSTATRFW infiNET Thermostat, White Available Accessories C2N-MNETGW infiNET Gateway/Transceiver C2N-MNETRPT infiNET Repe[...]

Crestron CHV-TSTATRF infiNET™ Thermostat CHV-TSTATRF Overall Dimensions (Front and Side Views) 1.03 in (2.60 cm) 5.53 in (14.05 cm) 4.50 in (11.43 cm ) 1 2 3 4 5 MODE FAN CHV-TSTATRF Overall D imensions (Rear View) 3.27 in (8.30 cm) Operations & Installation Guide – DOC. 6490A infiNET™ Thermostat: CHV-TSTATRF • 5[...]

infiNET™ Thermostat Crestron CHV-TSTATRF CHV-TSTATRF (Connection View, front with cover removed) 6 6 Connectors, Controls & Indicators # CONNECTORS, CONTROLS & INDICATORS DESCRIPTION 1 MODE BUTTON Cycles through available System Modes: OFF, HEAT, EMERGENCY HEAT (for heat pump or dual-fuel systems only), COOL and AUTO. 2 FAN BUTTON Toggles[...]

Crestron CHV-TSTATRF infiNET™ Thermostat Industry Compliance As of the date of manufact ure the CHV-TSTATRF has been tested and found to comply wit h specifications for CE m arking and standards per EMC and Radiocomm unications Com pliance Labelli ng. FCC ID: EROCWD1013 Compliance Statement (Part 15.19) This device complies with Part 15 of th e F[...]

infiNET™ Thermostat Crestron CHV-TSTATRF Installation NOTE: Installers should have a strong working knowl edge of HVAC systems. Mounting the CVH-TSTATRF to the Wall The location of the thermostat can affect its perform ance and efficiency. Install the thermostat away from direct sunli ght, drafts, doorways, skyl ights and windows. Also make sure [...]

Crestron CHV-TSTATRF infiNET™ Thermostat Installation view Operations & Installation Guide – DOC. 6490A infiNET™ Thermostat: CHV-TSTATRF • 9[...]

infiNET™ Thermostat Crestron CHV-TSTATRF Wiring the CHV-TSTATRF to the HVAC System Make the necessary connectio ns as called out in the illustratio ns that follow. A flat head screwdriver (not supplied) is requi red to attach the control wi res from the HVAC system. Apply power after all connections have been m ade. The illustrations on the follo[...]

Crestron CHV-TSTATRF infiNET™ Thermostat CHV-TSTATRF in Heat Only Application Transformer Heat Relay Optional, for power R C System 120 VAC (Refer to “Basic Thermostat Setup” on page 15) CHV-TSTATRF in Heat Only with Fan Application Transformer Heat Relay Optional, for power R C System 120 VAC Fan Relay RH-RC jumper required since supply powe[...]

infiNET™ Thermostat Crestron CHV-TSTATRF CHV-TSTATRF in Cool Only Application (Refer to “Basic Thermostat Setup” on page 15) Optional, for power Transformer R C C Y G R Compre ssor Relay Fan Relay RH-RC jumper r equired since supply power is returned t hrough RH CHV-TSTATRF in Heat-Cool App lication with Separate Systems C W R Y R Compresso r[...]

Crestron CHV-TSTATRF infiNET™ Thermostat CHV-TSTATRF in Heat-Cool Applica tion with Integrated Control Unit (Refer to “Basic Thermo stat Setup” on page 15) Transformer C W Y G R Optional, for powe r RH and RC jumpere d since contro l unit has them on a single t erminal Heat Relay Fan Relay Cool Relay R C CHV-TSTATRF in Heat Pump System A ppli[...]

infiNET™ Thermostat Crestron CHV-TSTATRF CHV-TSTATRF in Dual-Fuel Heat Pump Application Transformer R C C Y G O R Comp ressor Relay Fan Relay Changeover Valve Transformer R C Optional, for power Fossil Heat System (Refer to “Basic Thermostat Setup” on page 15) NOTE: The diagram above applies where furn ace control is not integrated into the h[...]

Crestron CHV-TSTATRF infiNET™ Thermostat Basic Setup Basic Thermostat Setup The following document s the most com mon CHV-TSTATR F setup requirements. For full details on all setup o ptions, refer to “Advanced Setup” which starts on page 19. Install two AA batteries (supplied) in the battery compartment. NOTE: When first setting up the CHV-TS[...]

infiNET™ Thermostat Crestron CHV-TSTATRF NOTE: The power stealing function m ay cause problems wi th some types of HVAC systems. While rare, the symptom w ould be a heat or cool call occurring when the thermostat itself does not indicate a heat or cool call. If this occurs, you should change the power setting to “24” a nd ensure that you have[...]

Crestron CHV-TSTATRF infiNET™ Thermostat Use and to choose 11 – 26 for fixed-channel operation, (Au) for aut o channel or (0) to disable the radio. Disabl ing the radio is useful for ext ending battery li fe if, for example, you have inst alled the therm ostat prior to installing t he gateway and/or control system. Press MODE until the Start in[...]

infiNET™ Thermostat Crestron CHV-TSTATRF network. Verify that the MNET ID for th e infiNET device is set to match the MNET ID specified in the program . Check the D3 Pro, SystemBuilder or SIMPL Windows program to ensure that a CHV-TSTATR F has been added at the proper MNET-ID. Refer to “Program ming wi th Crestron D3 Pro or SystemB uilder” on[...]

Crestron CHV-TSTATRF infiNET™ Thermostat Advanced Setup Setup Mode After the CHV-TSTATRF is installed, it is necessary to set it up for a particular heating/cooling syst em. Please note that som e of the setup param eters listed bel ow will not always be available. Refer to “Setup Mod e Parameters/Functions”, which starts on page 20 for detai[...]

infiNET™ Thermostat Crestron CHV-TSTATRF it will display “—” when a functio n is selected. All other display elements will be hidden (refer to “LCD Display ” which starts on page 28). NOTE: While in Setup mode, a period o f one minute with no butto n activity will cause the CHV-TSTATRF to revert to sta ndard operation, unless a functi o[...]

Crestron CHV-TSTATRF infiNET™ Thermostat Setup Mode Parameters/Functions (Continued) PARAMETER/ FUNCTION CODE VALID VALUES DEFAULT VALUE NOTES Heat Anticipator HA 1 – 6 3 Lower setting results in more frequent cycles and faster response (tighter regulation). Higher setting results in less frequent cycles and slow er response (looser regulation)[...]

infiNET™ Thermostat Crestron CHV-TSTATRF Setup Mode Parameters/Functions (Continued) PARAMETER/ FUNCTION CODE VALID VALUES DEFAULT VALUE NOTES Power Source Po 24V alway s available (24) or steal power (SP) 24 Selects source of input power for thermostat. 24VAC assumes constant power is available between the C and RH connectors. The steal-power fu[...]

Crestron CHV-TSTATRF infiNET™ Thermostat Setup Mode Parameters/Functions (Continued) PARAMETER/ FUNCTION CODE VALID VALUES DEFAUL T VALUE NOTES Check Battery Life bA Not started (--) Estimated remaining battery life (0 – 99) N/A Gives estimated remaining battery life in percent. Restore Factory Defaults Fd Not started (--) In progress (blank or[...]

infiNET™ Thermostat Crestron CHV-TSTATRF Operation System Mode The MODE button on the CHV-TSTATRF will cy cle the unit through all available system m odes in the following order: Off , Heat , Emergency Heat (for heat pump and dual-fuel systems), Cool and Auto (if enabled in Setup). The system mode will change upon release of the MODE button and t[...]

Crestron CHV-TSTATRF infiNET™ Thermostat 2. Use the and butto ns to adjust th e setpoint. Actual operation will depend on whether you are using single or dual setpoints. a. In dual setpoint Auto m ode, the first press of the or buttons (or second press if the first press simply turned on the backlight) will cause either the flame or snowflake ico[...]

infiNET™ Thermostat Crestron CHV-TSTATRF Fan The FAN button toggles the fan setting between fan AUTO and fan ON. When set to AUTO, a fan call will be made whenever the system makes a cool call or when the system makes a heat call or auxiliary heat call (if the HF setup parameter is set to “Y”). When set to ON the fan will always ru n. Setpoin[...]

Crestron CHV-TSTATRF infiNET™ Thermostat When the system mode changes to Heat or Emergency Heat , the current setpoint will be set to the scheduled heat setpoint . When the system mode changes to Cool , the current setpoint will be set to the scheduled cool setpoint. Remote Operation As an infiNET device, the CHV-TSTATR F can be controlled rem ot[...]

infiNET™ Thermostat Crestron CHV-TSTATRF LCD Display CHV-TSTATRF LCD Display C F HOLD AUTO H C F A OFF 5 1 2 3 4 6 7 8 9 LCD Display Elements # LCD DISPLAY ELEMENT DESCRIPTION 1 Large seven-segment digits Indicates current ambient temperature 1, 2 . In Setup mode, indicates current setup parameter/function. Display range is limited to –9º to 9[...]

Crestron CHV-TSTATRF infiNET™ Thermostat LCD Display Elements (Continued) # LCD DISPLAY ELEMENT DESCRIPTION 5 Fan icon Displayed at all times. Flashes if a communication error occurs. 6 AUTO indicator Displayed when FAN setting is AUTO. If this is not displayed, FAN is alw ays ON. 7 OFF indicator Displayed w hen the system mode is Off. 8 HOLD ind[...]

infiNET™ Thermostat Crestron CHV-TSTATRF Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be vi ewed in the Online Help section of the Crestron website . To post a question or view questions y ou have submitted to Crestron’s True Blue Support, log in at http://support.cres[...]

Crestron CHV-TSTATRF infiNET™ Thermostat NOTE: It is not recomm ended to add the CHV-TSTATRF di rectly. Instead, add one of the available “m odules” listed underneat h it as shown below. Locating the C2N-MNETGW in th e Device Library Locating the CHV-TSTATRF in the Device Librar y • The system tree of the control system displays the device [...]

infiNET™ Thermostat Crestron CHV-TSTATRF “CHV-TSTATRF Device Settings” Window • The ID code specified in the SIMPL Windows program m ust ma tch the MNET ID of each unit. Program Manager Program Manager is t he view where programm ers “program” a Crestron cont rol system by assigning signals to sym bols. The sym bol can be viewed by doub[...]

Crestron CHV-TSTATRF infiNET™ Thermostat Uploading and Upgrading Crestron recomme nds using the latest pr ogramm ing software and that each device contains the latest firmware to take advantage of the m ost recently released features. However, before attempting to upload or upgrade it is necessary to establish comm unication. Once comm unication [...]

infiNET™ Thermostat Crestron CHV-TSTATRF Firmware Check the Crestron website to fi nd the latest firm ware. (New users may be requi red to register to obtain access to certain areas of the site, including the FTP site.) Upgrade CHV-TSTATRF firmware vi a Crestron Toolbox. • Establish communications with the CHV-TSTATRF and display th e “System[...]

Crestron CHV-TSTATRF infiNET™ Thermostat Problem Solving Troubleshooting The following table provides correct ive action for possible troubl e situations. If further assistance is required, please contact a Crestron customer service representative. CHV-TSTATRF Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION No power from system. Check[...]

infiNET™ Thermostat Crestron CHV-TSTATRF CHV-TSTATRF Troubles hooting (Continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Cannot change setpoint setting. The upper or lower temperature limits were reached. Heat setpoint range is 38º to 89ºF (3º to 32ºC). Cool setpoint range is 59º to 99ºF (15º to 37ºC) or 38º to 99ºF (3º to 37ºC) [...]

Crestron CHV-TSTATRF infiNET™ Thermostat If the CHV-TSTATRF goes into boo tloader, the large seven-seg ment display will show “Ld”, except when in Setup mode. All other LCD segments will be off. All button presses will be ignored, excep t for the sequence which enters Setup mode (refer to “Setup Mode” which starts on page 19). From the bo[...]

infiNET™ Thermostat Crestron CHV-TSTATRF Appendix: About Heat Pumps A heat pump extracts available heat from one area and transfers it to another. Even cold air contains som e heat and heat pumps can extract heat from the outside air on a cold day and transfer it indoors to m aintain a com fortable tem perature. A heat pum p also works in reverse[...]

Crestron CHV-TSTATRF infiNET™ Thermostat Glossary Anticipators Used to anticipate the drop or rise in temperature and energize the appropriate system before reaching th e set point. Anticipators affect how tightly the setpoint temperature is maintained. Auto Dead Band Sets the mini mum separat ion in auto mode between heat and cool setpoints (wit[...]

infiNET™ Thermostat Crestron CHV-TSTATRF Humidity The total amount of moisture in ai r. Relative hum idity (RH) is t he amount of moisture in air, relative to its total capability based upon its tem perature (dew point). Moisture will condense on surfaces that are below this dew point. HVAC Heating, ventilation and air conditioning. Interstage Di[...]

Crestron CHV-TSTATRF infiNET™ Thermostat Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise m ay be returned for credit, exchange or service without prior aut horization from CRESTR ON. To obtain warranty service for CR ESTRON products, contact an authorized CRESTRON dealer. On ly authorized CRESTRON deal ers may [...]

infiNET™ Thermostat Crestron CHV-TSTATRF This page is intention ally left blank. 42 • infiNET™ Thermostat: CHV-TSTATRF Operations & Installation Guide – DOC. 6490A[...]

Crestron CHV-TSTATRF infiNET™ Thermostat Operations & Installation Guide – DOC. 6490A infiNET™ Thermostat: CHV-TSTATRF • 43 This page is intention ally left blank.[...]

Crestron Electronics, Inc. Operations & Installation Guide – DOC. 6490A 15 Volvo Drive Rockleigh, NJ 07647 (2015101) Tel: 888.CRESTRON 11.08 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.[...]