Centro 3000 manuale d’uso

THIS BARBECUE IS FOR OUTDOOR USE ONL Y W ARNING Failure to follow all of the manufactur er’ s instructions could result in hazar dous fires, explosions, pr operty damage, or serious personal injury or even death. W ARNING Follow all leak check procedur es carefully prior to operation of barbecue, even if barbecue was store assembled. Do not try t[...]

i i T ABLE OF CONTENT S W arrant y . . . . . . . . . . . . . . . . . i i Installation Informatio n . . . . . . 1 Additional W a r ning s . . . . . . . . 1 Use of LP Gas Cylinde r , . . . . . 1- 2 T ransportation and Storage of the LP Cylinde r , Filling the LP Cylinde r Prior to Using the Gril l . . . . . . . 3 Safety Hose and Regulato r . . . . 4 [...]

1 ADDITIONAL W ARNINGS INST ALLA TION INFORMA TION The installation of this appliance must be in accordance with all local codes, or in the absence of local codes: • Canadian installation must conform to the current national standar ds, which at this time are CAN / CGA-B149.1/2-Natural Gas / Pr opane installation code. Drawing A Minimum clearance[...]

2 FILLING THE LP CYLINDER The cylinder must be filled prior to use and must have the air purged. For safety , follow these instructions when having your cylinder filled: • Have only your local qualified LP gas dealer fill or repair a cylinder . • Do not overfill the cylinder beyond the safe 80% fill level. • Make sure the dealer tests and che[...]

3 Orifice Size: The orifice, in conjunction with the control valve, acts to r egulate and restrict the amount of gas delivered to the burner . The hole size in the orifice varies by the gas sup- ply pressur e and by the BTU rating of the bur ner . Grills equipped for LP gas operate at a much higher gas pressur e and therefore have a smaller size or[...]

4 SAFETY HOSE AND REGULA TOR Propane Gas Models: Y our barbecue is designed to operate on L.P . (Propane) gas at a pressur e of 2.74 Kpa (11˝ water column). A regulator preset to this pr essure is supplied with the barbecue and must be used. This regulator is equipped with the T ype-1 quick-closing connecting system, which incor- porates these saf[...]

5 Drawing B Drawing C Drawing D SAFETY LEAK TESTING Perform a “Leak T est” • Before lighting your barbecue for the first time. • Every time the cylinder is refilled, or any component is r eplaced. • At least once every year , preferably at the start of the season. The “Leak T est” must be done outdoors, away from heat, open flames and[...]

6 LIGHTING THE GRILL Make Sure you have followed all the safety checks, pr ocedures and instructions indicated in the previous section, befor e attempting to light the grill. Lighting The Main Burners 1. Always open the hood completely and always inspect the grill and burners to confirm that all components are pr operly positioned before lighting t[...]

7 6. Confirm that the burner is properly lit. If the flame pattern is other than normal, consult the T roubleshooting Guide for corrective action. 7. Always preheat the Barbecue befor e starting to cook. Light all bur ners and adjust them to the HIGH position for 5-10 minutes. Before placing any food on the Barbecue, clean the cooking grids with a [...]

8 Lighting the Second Burner • T urn the second control knob on the main control panel to the “HIGH” position. The unlit burner will automatically ignite. Lighting the Side Burner Use the Electronic Ignitor located on the main contr ol panel and the far left side bur ner control knob in this step. 1. Push in and turn the Side bur ner control [...]

9 Parts Included With Y our Grill This model comes equipped with a 12’ Natural Gas hose with male socket connection that will allow you to attach your Barbecue to your residential gas line. Before lighting your Barbecue for the first time, and at the beginning of every season you must do the following: W ar ning: We str ongly recommend contacting[...]

10 Always disconnect the Grill and close its individual manual shutoff valve, when conducting pressur e tests of the gas supply piping system at pressures which exceed 1/2 psi (3.5kPa). When conducting pressur e test always isolate the Grill from the gas supply piping system by closing its individual manual shutoff valve. All gas supply plumbing mu[...]

11[...]

12 12 P ARTS LISTING FOR 85-1114-2 (PROP ANE) (G50212) Item No. Quantity Specification Part No. A 1 T op Lid Assembly AA 1 T op Lid Weldment G502-5600-01 AB 1 Thermometer G413-0029-01 AC 2 Screw F/ T op Lid G501-0005-01 AD 1 Handle F/ T op Lid G502-0001-01 B 1 Burner Box Assembly BA 1 Burner Box Weldment G502-3700-01 BB 1 Upper Side Panel, Left G50[...]

13 BN BO BP BQ BS BR BS BT BU BW BV 85-1114-2 (PROP ANE) (G50212)[...]

14 P ARTS LISTING FOR 85-1099-8 (NA TURAL GAS) (G50214) Item No. Quantity Specification Part No. A 1 T op Lid Assembly AA 1 T op Lid Weldment G502-5600-01 AB 1 Thermometer G413-0029-01 AC 2 Screw F/ T op Lid G501-0005-01 AD 1 Handle F/ T op Lid G502-0001-01 B 1 Burner Box Assembly BA 1 Burner Box Weldment G502-3700-01 BB 1 Upper Side Panel, Left G5[...]

15 BW BN BO BP BS BS BR BT BU BQ 85-1099-8 (NA TURAL GAS) (G50214)[...]

16 16 16 Hardwar e Pack List No. Description Part Number Quantity 1 1/4” x 38mm Screw 20120-13038-250 4 2 1/4” x 13mm Screw 20120-13013-250 12 3 Ø7 Lock Washer 41400-07000-250 16 4 Ø7 Washer 40300-07000-250 16 5 1/4"-20UNC Nut 30220-13000-250 6 6 NO.10_10 Screw 20124-10010-250 16 7 Ø5 Lock Washer 41400-05000-250 16 8 Ø5 Washer 40300-05[...]

17 1 Attach two front casters (CN) and two back casters with lock (CM) to the bottom shelf (CK) using the wrench #13 pr ovided. 2 Assemble the left and right cart side panel (CA & CB) to the bottom shelf (CK) as shown using hardwar e #2 ( X6) (from the top) and #3, #4 and #5 (X6) (from the bottom). 3 Assemble the upper rail (CJ) to the cart ass[...]

18 5 Open lid and position the 3 flame tamers (BN) above the 3 main burners (BK & BL). Place the 2 cooking grate (BJ) into the burnerbox above the flame tamers (BN). BN 4 Place the top lid and burner box assembly (A+B) onto the cart assembly as shown. Attach them using hardwar e #6, #7 and #8 (x6) to the screw holes as shown. Fig. 4 Fig. 5 6 At[...]

19 7 Insert the left and right grease tray bar (CD & CE) into the holes of upper rail (CJ) as shown. Assemble the upper rear panel (BQ) to the burner box and cart assem- bly using hardwar e #1, #3 and #4 (x4). Attach the upper rear panel (BQ) to both gr ease tray rails (CD & CE) and heatshield (CC) using hardwar e #9 (x4) as shown. 8 Insert[...]

20 BF 10 Push the side burner valve stem (BF) and mount it by using screws and washers included on the valve bracket, threading thr ough the side burner control panel. Affix the Bezel (BT) onto the valve stem using hardwar e provided. Push the knob (BS) onto the valve stem with the arrow on the knob pointing upwar ds. Insert the side burner (DB) in[...]

21 Fig. 10 13 For propane model only Secure 20 lb pr opane tank onto the bottom shelf of the cart as shown, attach the regulator valve to 20 lb pr opane tank. W ARNING Do not store extra pr opane tanks within BBQ cart.[...]

DISTRIBUTOR T rileaf Distribution T rifeuil T oronto, Canada M4S 2B8[...]