Belling SCIH60 manuale d’uso

Belling IH60 UK Part No 082749202 Date 21/11/2012 Users Guide & Installation Handbook[...]

CONTENTS & INTRODUCTION CONTENTS • SAFET Y • USING THE PRODUCT • CLEANING • INST ALL A TION INSTRUCTIONS • TECHNICAL DA T A • CUSTOMER CARE INTRODUCTION Thank you for buying this British- built appliance from us. This guide book is designed to help you through each step of owning your new appliance, from installati[...]

Safety WARNING! - This appliance and its accessible parts may become hot during use. T o avoid burns, chi ldren less than 8 years of age shall be kept aw ay unless continuously supervised. This appliance can be used by children aged from 8 y ears and above and persons with re- duced physical, sensory or mental capabilities or lack of experience and[...]

Safety General Servicing should be carried out only by authorised personnel. Do not spray aer osols in the vicinity of this appliance while it is in operation. Donotstoreoruseammableliquidsor items in the vicinity of this appliance. Do not modify this appliance. • Always ensure that pan bases are dry ,stableand[...]

Safety Avoiding damage to the appliance. The ceramic glass of the hob can be damaged by objects falling onto it. Be especially careful with heavy jars of f ood being stored in cupboards above the hob , we recommend storing them away f rom the hob area. The edge of the glass can be damaged by being knocked by cookware. Cookware made of cast iron, ca[...]

USING THE HOB - INDUCTION Before using your hob It is recommended that you clean and wash the hob surface bef ore using for the rsttime.Applyathincoatofceramic hob cleaner to the hob to maintain and protect it. See the customer care section for details of how to obtain all the av ail- able cleaning products. TOUCH CONTROL[...]

USING THE HOB Central On/Off switch The central on/off switch enables all of the cooking zones to be switched off simultaneously at a touch of a key . To switch on the hob The hob is switched On by touching the“ON/OFF” key for 1 sec. A beep sounds and all the heater displays show a full stop in the cook zone display . If the selection of a heat[...]

USING THE HOB Pan Detection As soon as you lift the pan off the zone the power is automatically reduced, help- ing to save energy . The above “U” symbol appears when a zone has been activated but no pan has been placed on the cook zone, If the “U” symbol does not disappear when a pan is placed on the zone it indicates that the pan is not su[...]

USING THE HOB Induction Cook Zone Smallest Recom- mended Diameter (mm) LHF 150 LHR 120 RHR 150 RHF 120 Cookware made of enamelled steel or with aluminium or copper bottoms can leave discolor ations on the ceramic glass surfacewhicharedifcultorimpossibleto remove. Pans unsuitable for Induction: Pans made of copper , stainless[...]

USING THE HOB TROUBLESHOOTING The hob produces a smell the rst few times it is used Heat a pan full of water on each zone f or half an hour . Pans make a noise during cooking This is caused by vibration due to the pas- sage of energy from the hob to the pan. On a high setting this is quite normal for certain types of saucepan. It will not dam- a[...]

USING THE HOB Appliance Errors Fault Description Action F0 Software Error Switch the power off and on, system should reset FA Safety key Error Switch the power off and on, system should reset FC Safety key Error Switch the power off and on, system should reset FE T ouch Ntc Error Switch the power off and on, system should reset Ft T ouch Ntc Error [...]

CLEANING ELECTRIC HOB Ceramic glass hobs • It is recommended that you clean and wash the hob surface bef ore usingforthersttime.Applyathin coat of ceramic hob cleaner to the hob to help maintain and protect it. • The ceramic hob top can be cleaned using a clean, damp cloth or kitchen paper . Do not use a used di[...]

installation General information Installation should only be carried out by aqualiedinstallerorengineer . Please keep to the following points most carefully; Although every care has been taken to ensure this appliance has no burrs, or sharp edges, we recommend that you wear protective gloves when install- ing and moving this applianc[...]

installation CHOOSING YOUR INSTALLATION Make sure that the air inlets through the ventilator grids underneath the hob are never blocked. W e recommend that you install this ap- pliance in a work top which is a minimum 38mmdeep. Thehobcanbettedintoaworktop lessthan38mmdeep,butthe20mmgap betwee[...]

installation Clearances and dimension – require- ments No shelf or overhang of combustible material should be closer than 650mm above the hob. There must be a minimum clearance of 50mm between the edges of the hob and any side walls; this clear ance must be maintained up to 420mm above the worktop. There must be a minimum clearance of 50mm betwee[...]

installation Fitting into worktop Cut a hole in the work surface to the required size. A clearance of at least 50mm should be maintained between the cutout and any rear or side wall. The worktop must be of heat-resistant material or covered with heat -resistant material. Protecting the cut-out; The types of chipboard used for work surfaces swell re[...]

installation Fixing Bracket Advice Dealing with sides, cross-rails and back -panels in the cabinetry . Depending on the cabinets, the worktop thickness and the hob positioning, it is possible for the hob base and/or the clamp brackets to interf ere with parts of the cabinet. Cut away cabinetry and use appr opriate xingbracketsf oryour?[...]

installation Connect to the electricity supply (For Fixed Wiring only) WARNING: This appliance must be earthed. Only connect to the electrical mains terminal with the power switched off . The electrical mains terminal is live. Follow the terminal block connection schematic. Loose and inappropriate connections can make the terminal overheat. Ensure?[...]

TECHNICAL DATA SINGLE PHASE SUPPLY: 230 -240V ~ 50Hz 6.6kW - 7.2kW 3 PHASE SUPPLY: 230 / 400V 3N ~ 50Hz Individual Cook Zone Power Ratings Cook Zone Normal Power/Boost Power Rating kW LHF 1.5/2.0 LHR 1.2/1.6 RHR 1.5/2.0 RHF 1.2/1.6[...]

CUSTOMER CARE CUSTOMER CARE WEB SHOP Having purchased a superior cooker , hob or hood from us, you’ll naturally want to keep it looking great. And who better to help you care for it than the manuf ac- turer? W e offer an extensive r ange of accesso- ries, components and cleaning products which, will instantly give your cooker a good as new look. [...]

Please keep this handbook for f uture reference, or for an yone else who may use the appliance.[...]

Please keep this handbook for f uture reference, or for an yone else who may use the appliance.[...]

Please keep this handbook for f uture reference, or for an yone else who may use the appliance.[...]

CUSTOMER CARE T o contact Belling about your appliance, please call Warranty Registration 0844 481 0182 to register your appliance Customer Care Helpline 0844 815 3746 incaseofdifcultywithintheUK Alternatively general, spar es and service information is available f rom our website at www.belling.co.uk Please ensure that you hav[...]