Axis Communications P3364-LVE manuale d’uso

AXIS P3364–L VE User Manual User Manual[...]

About this Document This manual is intended for administrators and users of AXIS P3364-LVE Fixed Dome Network Camera, and is applicable to rmware 5.60 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-b[...]

Photobiological Safety Battery Low battery power affects the operation of the RT C, causing it to reset at every power-up. When the battery needs replacing, a log message will appear in the product’s server report. For more information about the server report, see the product´s setup pages or contact Axis support. The battery should not be repla[...]

AXIS P3364–L VE User Manual T able of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Hazard Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Other Message Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

AXIS P3364–L VE User Manual T able of Contents Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

AXIS P3364–L VE User Manual Safety Infor mation Safety Infor mation Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury . WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury . CAUTION Indicates a hazardous situation which, if not avoi[...]

AXIS P3364–L VE User Manual Hardware Overview Hardware Overview Important Make sure the switch under the camera is congured to P oE class 3 with regard to heater and IR illumination, both of which will not work if congured otherwise. 1 2 1 6 1 0 1 2 3 4 5 6 7 8 1 3 1 4 1 5 1 1 9 1. Heater (only in outdoor model) 2. IR light 3. Network conne[...]

AXIS P3364–L VE User Manual Hardware Overview Connectors and Buttons For technical specications, see page 64 . Network Connector RJ45 Ethernet connector with P ower over Ethernet (P oE). NO NO NO TICE TICE TICE The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall be intende[...]

AXIS P3364–L VE User Manual Hardware Overview LED Indicators Note • The Status LED can be congured to be unlit during normal operation. T o congure, go to Setup > System Options > P orts & Devices > LED . See the online help for more information. • The Status LED can be congured to ash while an event is active. • Th[...]

AXIS P3364–L VE User Manual Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are • Internet Explorer ® with Windows ® • Safari ® with OS X ® • Chrome TM or Firefox ® with oth[...]

AXIS P3364–L VE User Manual Access the Product For Technical notes on this and other topics, visit the Axis Support web at www .axis.com/techsup Set the Root P assword To access the Axis product, you must set the password for the default administrator user root . This is done in the Congure Root P assword dialog, which opens when the product i[...]

AXIS P3364–L VE User Manual Access the Product Click Pulse to activate the product’s output port for a dened period of time. For information about how to enable and congure output buttons, see page 30 . The output button name may differ depending on the name entered in the I/O P orts conguration. Click the Active/Inactive buttons to ma[...]

AXIS P3364–L VE User Manual Access the Product AXIS Media Control viewer toolbar The AXIS Media Control viewer toolbar is available in Internet Explorer only . See AXIS Media Control (AMC) on page 15 for more information. The toolbar displays the following buttons: The Play button connects to the Axis product and starts playing a media stream. Th[...]

AXIS P3364–L VE User Manual Access the Product Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls. User-dened buttons can also appear in the Control panel. See Controls on page 3 1 . Select a PTZ preset position to steer the camera view to the saved position. See Preset P ositions on page 3 1 . P a[...]

AXIS P3364–L VE User Manual Media Streams Media Streams The Axis product provides several audio and video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, audio streams and to the list of available stream[...]

AXIS P3364–L VE User Manual Media Streams The AMC Control P anel can be used to congure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control P anel from: • Windows Contr[...]

AXIS P3364–L VE User Manual Media Streams Note • <ip>= IP address • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. Access Audio Streams The Live View[...]

AXIS P3364–L VE User Manual Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. T o open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have access to all se[...]

AXIS P3364–L VE User Manual Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality . Y ou can congure the following: • Video stream settings. See page 19 . • Stream proles. See page 20 . • Camera settings. See page 2 1 . • View area. See page 23 . • Overlay image. See page 23 .[...]

AXIS P3364–L VE User Manual Video and Audio H.264 H.264, also known as MPEG-4 P art 1 0/A VC, is a video compression standard that provides high quality video streams at low bit rates. An H.264 video stream consists of different types of frames such as I-frames and P-frames. An I-frame is a complete image whereas P-frames only contain the differe[...]

AXIS P3364–L VE User Manual Video and Audio To select a default stream prole for the Live View page, go to Setup > Live View Cong . Camera Settings The Video & Audio > Camera Settings page provides access to advanced image settings for the Axis product. Image Appearance To change Image Appearance go to the menus under Setup > V[...]

AXIS P3364–L VE User Manual Video and Audio Shutter & Gain The shutter and gain settings affect the amount of motion blur and noise in the image. T o adapt to different lighting, available storage space and bandwidth, it is often necessary to prioritize either low motion blur or low noise. The Axis product allows using different prioritizatio[...]

AXIS P3364–L VE User Manual Video and Audio Built-in IR Illuminations LEDs The IR illumination can be activated or de-activated, and its intensity can be increased or decreased by moving the slider , from the product’s Live View page. Other settings can be dened from Setup > Video & Audio > Camera Settings . De-select the Enable IR[...]

AXIS P3364–L VE User Manual Video and Audio 2. T o include an overlay image, select Include overlay image at the coordinates . The overlay image must rst be uploaded to the Axis product, see Overlay Image . 3. T o include date and time, select Include date and Include time . 4. T o include a text string, select Include text and enter the text [...]

AXIS P3364–L VE User Manual Video and Audio 3. T o control the image’s position, enter the X and Y coordinates. The X=0 and Y=0 position is the top left corner . If a part of the image is positioned outside the video image, the overlay image will be moved so that the whole image is visible. 4. Click Save . Use Overlay Text in an Action Rule Act[...]

AXIS P3364–L VE User Manual Video and Audio To set focus and zoom: 1. Install the camera as described in the Installation Guide. 2. Go to Video & Audio > Focus & Zoom . 3. On the Basic tab , set the zoom level using the slider . The buttons < and > move the zoom position one step in either direction. The buttons << and >[...]

AXIS P3364–L VE User Manual Video and Audio Note The internal microphone is used by default; the external microphone is used when connected. It is possible to disable the internal microphone by connecting a plug to the mic input. Select Microphone to use an external microphone or Line to use a Line in device, e.g. an audio mixer for multiple micr[...]

AXIS P3364–L VE User Manual Video and Audio Audio Clips An audio clip is a sound le that can be played when events occur or directly from the Live View page. The audio clip must rst be uploaded to the Axis product or recorded by a microphone connected to the product. To add, download, modify or remove audio clips, go to Video & Audio &g[...]

AXIS P3364–L VE User Manual Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 20 . • Default Viewer for Browser . See page 29 . • Viewer Settings. See pag[...]

AXIS P3364–L VE User Manual Configure the Live View Page User Dened Links To display user-dened links in the Live View page, select the Show custom link option, give the link a name and then enter the URL to link to. When dening a web link do not remove the 'http://' from the URL address. Custom links can be used to run script[...]

AXIS P3364–L VE User Manual PTZ (Pan T ilt Zoom) PTZ (Pan T ilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area. For more information on view areas, see View Area on page 23 . Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a specic pos[...]

AXIS P3364–L VE User Manual PTZ (Pan T ilt Zoom) • Zoom control To disable specic controls, deselect the options under Enable/Disable controls . Note Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to preset positions that require a tilt movement. Control Queue[...]

AXIS P3364–L VE User Manual Detectors Detectors Camera T ampering Camera T ampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, spray-painted or severely defocused. To send an alarm, for example an email, an action rule must be set up. To congure tampering detection: 1. Go to Detectors > Camera T [...]

AXIS P3364–L VE User Manual Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window . Set Up Motion Detect[...]

AXIS P3364–L VE User Manual Detectors Note • T o trigger on small objects or movements, use several small motion detection windows rather than one large window , and select a low object size. • T o avoid triggering on small objects, select a high object size. • While monitoring an area where moving objects are not expected, select a high hi[...]

AXIS P3364–L VE User Manual Applications Applications AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications for Axis products. For information about available applications, downloads, trials and licenses, go to www .axis.com/applications Note • Several applications can[...]

AXIS P3364–L VE User Manual Applications If the Axis product is reset to factory default, uploaded applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . 37[...]

AXIS P3364–L VE User Manual Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected. The set of conditions that denes how and when the action is triggered is called an action rule[...]

AXIS P3364–L VE User Manual Events - Day/Night Mode – Trigger the rule when the product switches between day mode (IR cut lter on) and night mode (IR cut lter off). This can for example be used to control an external infrared (IR) light connected to an output port. - Live Stream Accessed – T rigger the rule when any stream is accessed a[...]

AXIS P3364–L VE User Manual Events - Use Schedule – T rigger the rule according to the selected schedule. See Create Schedules on page 42 . Actions Available actions include: • IR Illumination – Activate or deactivate IR light. • Day/Night Vision Mode – Set day mode (IR cut lter on) or night mode (IR cut lter off). • Output P or[...]

AXIS P3364–L VE User Manual Events Recipient Use with action Notes Email Send Images Send Notication Send Video Clip An email recipient can contain multiple email addresses. FTP Send Images Send Video Clip HTTP Send Images Send Notication Send Video Clip HTTPS Send Images Send Notication Send Video Clip Encrypted le transfer using Hyp[...]

AXIS P3364–L VE User Manual Events Create Schedules Schedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outside ofce hours. Use one of the predened schedules or create a new schedule as described below . To create a new schedule: 1. Go to Events > Schedules and clic[...]

AXIS P3364–L VE User Manual Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 45 . • To set up action rules, see page 38 . • To access recordings, see Find Recordings on page 43 . • To play recordings, see Play Recording on pag[...]

AXIS P3364–L VE User Manual Recordings To play a recording, follow these steps: 1. Go to Recordings > List . 2. T o reduce the number of recordings displayed, select the desired options under Filter and click the Filter button to apply the lters. See also Find Recordings on page 43 . 3. Select the recording and click Play . The recording wi[...]

AXIS P3364–L VE User Manual Recordings To remove a recording, select the recording and click Remove . Continuous Recording The Axis product can be congured to continuously save video to a storage device. For information about storage devices, see Storage on page 55 . To prevent the disk from becoming full, it is recommended to congure the d[...]

AXIS P3364–L VE User Manual Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. To switch languages, go to Setup > Languages and rst upload the new language le. Browse and locate the le and click the Upload Language button. Sel[...]

AXIS P3364–L VE User Manual System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may[...]

AXIS P3364–L VE User Manual System Options To enable HTTPS on the Axis product: 1. Go to System Options > Security > HTTPS 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user gro[...]

AXIS P3364–L VE User Manual System Options Note Installed certicates, except preinstalled CA certicates, will be deleted if the product is reset to factory default. Preinstalled CA certicates that have been deleted will be reinstalled. A Server/Client certicate can be self-signed or issued by a Certicate Authority (CA). A self-sign[...]

AXIS P3364–L VE User Manual System Options If using an NTP server , select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes . The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the predened formats or see File[...]

AXIS P3364–L VE User Manual System Options Linux/Unix example arp -s 192.168.0.125 00:40:8c:18:10:00 temp ping -s 408 192.168.0.125 Windows syntax (this may require that you run the command prompt as an administrator) arp -s <IP address> <serial number> ping -l 408 -t <IP address> Windows example (this may require that you run t[...]

AXIS P3364–L VE User Manual System Options Advanced T CP/IP Settings DNS Conguration DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are congured under System Options > Network > TCP/IP > Advanced . Select Obtain DNS server address via DHCP to use the DNS settings provided by the D[...]

AXIS P3364–L VE User Manual System Options NAT traversal (port mapping) for IPv4 A network router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwarding network trafc from the private network to the “outside”, that is, the Internet. Security on the private network (LAN) is increas[...]

AXIS P3364–L VE User Manual System Options QoS (Quality of Service) QoS (Quality of Service) guarantees a certain level of a specied resource to selected trafc on a network. A QoS-aware network prioritizes network trafc and provides a greater network reliability by controlling the amount of bandwidth an application may use. The QoS setti[...]

AXIS P3364–L VE User Manual System Options RTP/H.264 The RTP port range and multicast settings are congured under System Options > Network > RTP . The RTP port range denes the range of ports from which the video/audio ports are automatically selected. For multicast streams, only certain IP addresses and port numbers should be used. Se[...]

AXIS P3364–L VE User Manual System Options 4. The card can now be removed. Format SD Card NO NO NO TICE TICE TICE Formatting the SD card will remove all data and recordings stored on the card. The Axis product can be congured to automatically format SD cards that are inserted into the product. If autoformat is enabled and an SD card is inserte[...]

AXIS P3364–L VE User Manual System Options To avoid lling the share, it is recommended to remove recordings continuously . Under Recording Settings , select Remove recordings older than and select the number of days or weeks. To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings . P orts &[...]

AXIS P3364–L VE User Manual System Options Support Support Overview The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require technical assistance. See also Troubleshooting on page 60 . System Overview To get an overview of the Axis product’s status and setting[...]

AXIS P3364–L VE User Manual System Options File Upload Files, for example webpages and images, can be uploaded to the Axis product and used as custom settings. T o upload a le, go to System Options > Advanced > File Upload . Uploaded les are accessed through http://<ip address>/local/<user>/<file name> where <user[...]

AXIS P3364–L VE User Manual Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular problem. The c[...]

AXIS P3364–L VE User Manual Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www .axis.com/techsup/ Symptoms, P ossible Causes and Remedial Actions Problems setting the IP address When using ARP/Ping Try the ins[...]

AXIS P3364–L VE User Manual Troubleshooting Problems with streaming H.264 Problems with AXIS Media Control ( Internet Explorer only ) To enable the updating of video images in Internet Explorer , set the browser to allow ActiveX controls. Also, make sure that AXIS Media Control is installed on your computer . No H.264 displayed in the client Chec[...]

AXIS P3364–L VE User Manual Troubleshooting No audio Incorrect setup Check the sound card in the computer . Ensure that mute is not selected and that the volume settings are correct. Check that Enable audio support is selected under Setup > System Options > Security > Audio Support . Check that the correct Audio Input source is selected [...]

AXIS P3364–L VE User Manual T echnical Specifications T echnical Specifications Function/group Item Specications Models AXIS P3364–LVE Image sensor Progressive scan RGB CMOS 1/3”, 1.3MP Lens Varifocal, remote focus and zoom, P-iris, IR corrected, mexapixel resolution 6 mm models: 2.5-6 mm, F1.2 Wide: horizontal angle of view: 1 05°- 1 0[...]

AXIS P3364–L VE User Manual T echnical Specifications Function/group Item Specications Audio streaming T wo-way , full duplex Audio compression AAC LC 8/16 kHz, G.7 1 1 PCM 8 kHz, G.726 ADPCM 8 kHz Congurable bit rate Audio Audio input/output External microphone input or line input, line level output Security P assword protection, IP addre[...]

AXIS P3364–L VE User Manual T echnical Specifications Function/group Item Specications Edge storage SD/SDHC memory card slot (card not included) Support for recording to network share (Network Attached Storage or le server) Operating conditions -40 to 55 °C (-40 to 13 1 °F), humidity 1 0 - 1 00% RH (condensing) Storage temperature -40 to[...]

AXIS P3364–L VE User Manual T echnical Specifications Function Pin Notes Specications 0 V DC (-) 1 0 V DC DC output 2 Can be used to power auxiliary equipment. Note: This pin can only be used as power out. 3.3 V DC Max load = 50 mA Digital input 3 Connect to pin 1 to activate, or leave oating (unconnected) to deactivate 0 to max 40 V DC Di[...]

AXIS P3364–L VE User Manual T echnical Specifications SD Card Slot Supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC or SDXC card with speed class 1 0. P erformance Considerations When setting up your system, it is important to consider how various settings and situations will affect performance. Some fac[...]

User Manual V er . M3.1 1 AXIS P3364–LVE User Manual Date: May 20 15 © Axis Communications AB, 20 12 - 20 15 P art No. 1460948[...]