Atlantis Land A02-RA243-W54M manuale d’uso

Where solutions begin WebShare 243WM Wireless MIMO ADSL2+ Router A02-RA243-W54M USER’S MANUAL A02-RA243-W54M_ME01 Company certified ISO 9001:2000[...]

[...]

WEBSHARE 243WM Copyright The Atlantis Land logo is a registered tradem ark of Atlantis Land SpA. All other names mentioned mat be trademarks or r egistered trademarks of their respective owners. Subject to change without notice. No liability for technical errors and/or omissions. CE Mark Warning This is a Class B product. In a domestic environment,[...]

WEBSHARE 243WM TABLE OF CONTENTS CHAPTER 1 ............................................. 1 1.1 A N O VERVIEW OF T HE W EB S HARE 243WM ................................................................................ 1 1.2 P ACKAGE C ONT ENTS ............................................................................................................[...]

WEBSHARE 243WM 3.6.3.3.2 Remote Access ................................................................................................... 39 3.6.3.3.3 Firmware .............................................................................................................. 40 3.6.3.3.4 Backup/Restore ..................................................[...]

[...]

WEBSHARE 243WM 1 Chapter 1 Introduction 1.1 An Overview of the WebShare 243WM Broadband Sharing and IP sharing The Wireless MIMO ADSL2+ Router supports 4 x 10/100 Mbps auto-negotiating Fast Ethernet ports for connection to your PC or LAN and downstream ( with built-in ADSL2+ modem) rate up to 24Mbps. Power by NAT technology, dozens of network users[...]

WEBSHARE 243WM 2 1.2 Package Contents • WebShare 243WM Wireless ADSL2+ Router • Vera (Multilanguage Interactive Tutorial) • One CD-Rom containing the online manual • One Quick Start Guide • 3* 5 dBi Antenna (R-SMA) • One RJ-11 ADSL/telephone cable • One CAT-5 LAN cable • One AC-DC power adapter (12VDC, 1A) If any of the above items [...]

WEBSHARE 243WM 3 • Network Address Translation (NAT): Allows multi-users to access outside resource such as Internet simultaneously with one IP address/one Internet access account. Besides, many application layer gateway (ALG) are supported such as web browser, ICQ, FTP, Telnet, E-mail, News, Ne t2phone, Ping, NetMeeting and others. • Firewall:[...]

WEBSHARE 243WM 4 • Virtual Server: Users can specify some services to be visible from outside users. The router can detect incoming service request and forward it to t he specific local computer to handle it. For ex ample, users can assign a PC in a LAN acting as a WEB server inside and expose it to the outside network. Outside users can browse a[...]

WEBSHARE 243WM 5 1.4 WebShare 243WM Wireless Application[...]

WEBSHARE 243WM 6 Chapter 2 Using WebShare 243WM Wireless 2.1 Cautions for using the WebShare 243WM Wireless Do not place the WebShare 243WM Wire less under high humidity and high temperature. Do not use the same power source for WebShare 243WM Wireless with other equipment. Do not open or repair the case yourse lf. If the WebShare 243WM Wireless is[...]

WEBSHARE 243WM 7 LAN Lights when connected to Ethernet device: • Green for 100Mbps; Orange for 10Mbps • Blinking when data transmit/received. ADSL Lights when successfully connected to an ADSL DSLAM. PPP Steady glow when there is a PPPoA / PPPoE connection. 2.3 The Rear Ports PORT Meaning LINE Connect the supplied RJ-11 cable to this port when [...]

WEBSHARE 243WM 8 them and the wall socket (unless you are using a C entral Splitter or Central Filter installed by a qualified and licensed electrician) , and ensure that all line filter s are correctly installed and the right way around. Missing line filters or line filters installed the wrong way around can cause problems with your ADSL connectio[...]

WEBSHARE 243WM 9[...]

WEBSHARE 243WM 10[...]

WEBSHARE 243WM 11 Chapter 3 Configuration The WebShare 243WM Wireless can be confi gured with your Web browser. The web browser is included as a standard application in the following operation systems, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me , and etc. The product prov ides a very easy and user- friendly interface for configuration. 3.1 Befor[...]

WEBSHARE 243WM 12 3.3 Configuring PC in Windows For Windows 95/98/ME 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible , or the name of any Ne twork Interface Card (NIC) in your PC. 3. Click Properties. 4. Select the IP Address tab. [...]

WEBSHARE 243WM 13 5. Then select the DNS Configuration tab. 6. Select the Disable DNS radio button and click “OK” to finish the configuration.[...]

WEBSHARE 243WM 14 For Windows NT4.0 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties . 3. Select the Obtain an IP address from a DHCP server radio button and click “OK” .[...]

WEBSHARE 243WM 15 For Windows 2000 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and Dial-up Connections . 2. Double-click LAN Area Connection . 3. In the LAN Area Connection Status window, click Properties .[...]

WEBSHARE 243WM 16 4. Select Internet Protocol (TCP/IP) and click Properties . 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click “OK” to finish the configuration.[...]

WEBSHARE 243WM 17 For Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections. 2. Double-click Local Area Connection 3. In the LAN Area Connection Status window, click Properties .[...]

WEBSHARE 243WM 18 4. Select Internet Protocol (TCP/IP) and click Properties . 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons 6. Click “OK” to finish the configuration.[...]

WEBSHARE 243WM 19 3.4 Factory Default Settings Before configurating this WebShare 243WM Wireless , you need to know the following default settings. • Username: admin • Password: atlantis • IP address (192.168.1.254), Subnet Mask (255.255.255.0) • DHCP Server: enable • WAN= PPPoA Routing, VPI=8, VCI=35, VC-Mux • SSSID= A02-RA243-W54M , C[...]

WEBSHARE 243WM 20 3.4.2 LAN and WAN Port Addresses The parameters of LAN and WAN ports are pre-set in the factory. Th e default values are shown below. LAN Port WAN Port IP address 192.168.1.254 Subnet Mask 255.255.255.0 DHCP server function Enabled N/A 3.5 Information from the ISP Before configuring this device, you have to c heck with your ISP (I[...]

WEBSHARE 243WM 21 You will get a status report web page when login successfully. At the configuration homepage, the left navigation page where bookmarks are pr ovided links you directly to the desired setup page, including: • Status (ARP Table, Rout ing Table, DHCP Table, System Log, Security Log) • Quick Start • Configuration (LAN, WAN, Syst[...]

WEBSHARE 243WM 22 • IP Address: A list of IP addresses of devices on your LAN (Local Area Network). • MAC Address: MAC (Media Access Control) address for each device on your LAN. • Interface: The interface name (on the router) t hat this IP Address connects to. • Static: Static status of the ARP table entry: • “ no ” for dynamically-g[...]

WEBSHARE 243WM 23 • Leased: DHCP assigned IP addresses information. • IP Address: IP addresses of devices on your LAN (Local Area Network). • MAC Address: The MAC Address that you want to assign the fixed IP address • Client Host Name: Expired IP addresses information • Register Time: Register time information 3.6.1.4 System Log Display t[...]

WEBSHARE 243WM 24 3.6.2 Quick Start Guide For detailed instructions on c onfiguring WAN settings, see the WAN section of this manual. The information you need for the Quick Start wizard to get you online are your login (often in the form of username@ispname), your password, and the encapsulation type. Your ISP can supply all the details you need. A[...]

WEBSHARE 243WM 25 • NAT: Select “ Enabled ”. Optional Setting • IP Address: Type your ISP assigned IP address in the IP Address text box. • Subnet Mask: Enter a subnet mask in dotted decimal notation. • Default Gateway: You must specify a gateway IP address (supplied by your ISP) DNS • Obtain DNS automatically: Select this check box t[...]

WEBSHARE 243WM 26 3.6.3 CONFIGURATION When you click this item, y ou get following sub-items to configure WebShare 243WM Wireless : • LAN • WAN • System • Firewall • QoS • Virtual Server • Advanced 3.6.3.1 LAN A Local Area Network (LAN) is a shared comm unication system to which many computers are attached and is limited to t he immed[...]

WEBSHARE 243WM 27 3.6.3.1.2 Wireless • Mode: 802.11b + g (Mixed mode), 802.11b and 802.11g. The factor y default is 802.11b + g. • ESSID: Enter the unique ID given to the Access Po int (AP), which is already built-in to the router’s wireless interfac e. To connect to this device, your wireless clients must have the same ESSID as the device. ?[...]

WEBSHARE 243WM 28 You must make sure that the SSID, Encryption and Channel is set the same as that AP you wish to c onnect. When WDS is enable only WEP ecryption is supported. The range of radio frequencies used by IEEE 802.11b wireless devices is called a “channel”. Channels available depend on your geographical area. You may have a choice of [...]

WEBSHARE 243WM 29 3.6.3.1.3 Wireless Security You can disable or enable with WPA or WEP for protecting wireless network. The default mode of wireless security is disabled . WPA Pre-Shared Key: • WPA Algorithms: TKIP (Temporal Key Integrity Protocol) utilizes a stronger encryption method and incorporates Mess age Integrity Code (MIC) to provide pr[...]

WEBSHARE 243WM 30 • WEP Encryption: To prevent unauthorized wireless st ations from accessing dat a transmitted over the network, the router offers highly secu re data encryption, known as WEP. If you require high security for tr ansmissions, there are two alternatives to select from: WEP 64 and WEP 128 . WEP 128 will offer increas ed security ov[...]

WEBSHARE 243WM 31 To disable the router’s DHCP Server, check Disabled and click Next then click Apply. When the DHCP Server is disabled you need to manually assign a fixed IP address to each PC o n your network, and set the default gateway for eac h PC to the IP addre ss of the router (the default is 192.168.1.254). To configure the router ’s D[...]

WEBSHARE 243WM 32[...]

WEBSHARE 243WM 33 3.6.3.2 WAN Before you start installing this device, you have to check with your ISP what kind of service (connection method) is provided such as PPPo E, PPPoA, RFC1483 bridged or routed, IP oA. Gather the information as illustrated in the following table and keep it for reference. PPPoE VPI/VCI, VC-based/LLC-based multiplexing, U[...]

WEBSHARE 243WM 34 PPPoE(RFC 2516) or PPPoA(RFC 2364) PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using PPP. PPPoA stands for Point to Point Protocol over ATM Adaptation Layer 5 (AAL5). It provides access control and billing functionality in a manner similar to dial-up services using PPP. • Description[...]

WEBSHARE 243WM 35 • Always on: If you want the router to es tablish a PPPoE session when starting up and to automatically re-establish the PPPoE session when disconnected by the ISP. • Connect to Demand(PPPoE only): If you want to establish a PPPoE session only when there is a packet requesting access to the Internet (i.e. when a program on you[...]

WEBSHARE 243WM 36 RFC 1483 Routing • Description: Your description of this connection. • VPI and VCI: Enter the information provided by your ISP. • NAT: The NAT (Network Address Translation) f eature allows multiple users to access the Internet through a single IP account, sharing the sing le IP address. If users on your LAN have public IP ad[...]

WEBSHARE 243WM 37 BRIDGE (PPPoE) • Description: A user-definable name for this connection. • VPI/VCI: Enter the information provided by your ISP. • Encapsulation method: Select the encapsulation format, this is provided by your ISP. 3.6.3.2.2 DNS A Domain Name System (DNS) contains a m apping table for domain name and IP addresses. On the Int[...]

WEBSHARE 243WM 38 3.6.3.2.3 ADSL • ADSL Mode: There are four modes “ Annex A ”,” Annex L ”,” Annex M” ,” Annex J” , that user can select for this connection. • Modulator: There are four modes “ AUTO ”,” ADSL multimode ”,” ADSL2 ”and” ADSL2+ ” that user can select for this connection. • DSP Firmware Version: DSP[...]

WEBSHARE 243WM 39 3.6.3.3 System There are six items within the System section: Time Zone, Remote Access, Firmware Upgrade, Backup/Restore, Restart and User Management. 3.6.3.3.1 Time Zone The router does not have a real time clock on board; instead, it uses the Simple Network Time Protocol (SNTP) to get the current time from an SNTP server outside[...]

WEBSHARE 243WM 40 3.6.3.3.3 Firmware Your router’s “firmware” is the software that allows it to operate and provides all its functionality. Think of your r outer as a dedicated computer, and the firmware as the software it runs. Over time this software may be impr oved and modified. Your router allows you to upgrade the software it runs to ta[...]

WEBSHARE 243WM 41 3.6.3.3.4 Backup/Restore These functions allow you to save and backup your router’s current settings to a file on your PC, or to restore a previously saved backup. This is useful if you wish to experiment with different settings, knowing that you have a backup handy in the ca se of any mistakes. It is advisable to backup your ro[...]

WEBSHARE 243WM 42 3.6.3.3.5 Restart Click Restart with option Current Settings to reboot your router and restore your last saved configuration. If you wish to restart the router using the fa ctory default settings (f or example, after a firmware upgrade or if you have saved an incorrect confi guration), select Factory Default Settings to reset to f[...]

WEBSHARE 243WM 43 You are strongly advised to chan ge the password on the default “ admin ” account when you receive your router, and any time you rese t your configuration to Factory Defaults.[...]

WEBSHARE 243WM 44 3.6.3.4 Firewall Your router includes a full DoS firewall for cont rolling Internet access from your LAN, as well as helping to prevent attacks from hackers. In addition to this, when using NAT (Network Address Translation. Please see the WAN configuration section for more details on NAT) the router acts as a “natural” In tern[...]

WEBSHARE 243WM 45 Packet filtering function enables you to configure your router to check specified internal/external user (IP address) from Internet access, or y ou can disable specific service request (Port number) to /from Internet. This configuration program allows you to set up different filter rules up to 10 for different us ers based on thei[...]

WEBSHARE 243WM 46 • Packet Type: Specify the packet type (TCP, UDP, IC MP or any) that the rule will be applied to.Select TCP if you want to scope for the connection-based application service on the remote server using the por t number. Or select UDP if you want to scope for the connectionless application service on the remote server using the po[...]

WEBSHARE 243WM 47 http(OutGoing/Ingoing):[...]

WEBSHARE 243WM 48 POP3 (OutGoing/Ingoing):[...]

WEBSHARE 243WM 49 SMTP (OutGoing/Ingoing):[...]

WEBSHARE 243WM 50 FTP (OutGoing/Ingoing)::[...]

WEBSHARE 243WM 51 DNS (OutGoing/Ingoing): 3.6.3.4.2 MAC address Filtering MAC filtering function enables you to configure y our ADSL Firewall Router to block internal user ( MAC address ) from Internet access. If you check Enable, remember to choosea defaulkt rules policy between Forward or Drop . If you select Forward , the packet with the MA C ad[...]

WEBSHARE 243WM 52 • Active: Select Yes from the drop down list box to enable MAC address filtering. • Action When Matched: Select “Drop” or “Forward”. • Log: Choose “Yes” if you wish to generate logs when the filer rule is applied to a packet. • MAC Address: Enter the MAC addresses you wish to manage. 3.6.3.4.3 Intrusion Detecti[...]

WEBSHARE 243WM 53 • Alert Mail Time: Set the time for re ceiving Alert mail. • Your E-Mail: Set your email address. • Recipient’s E-mail: Set the Recipient’s email ad dress to which the E-<mail notification is sent. • SMTP server: Set the SMTP (mail) server address. 3.6.3.4.4 Block Wan Request The “ Block WAN Request ” is a stand[...]

WEBSHARE 243WM 54 From/To: IP Address Block Mode: You can select when Router have yo use thess settings Keywords Filtering: Allows blocking by specific keywords within a partic ula r URL rather than having to specify a complete URL (e.g. to blo ck any image called “advertisement.gif”). When enabled, your specified keywords list will be ch ecked[...]

WEBSHARE 243WM 55 Restrict URL Features • Block Java Applet: Blocks Web content whic h includes the Java Applet to prevent someone who wants to damage your system via the standard HTTP protocol. • Block ActiveX: Blocks ActiveX • Block Cookies: Blocks Cookies • Block Proxy: Blocks Proxy[...]

WEBSHARE 243WM 56 3.6.3.5 QoS Quality of Service Introduction If you’ve ever found your ‘net’ speed has slow ed to a crawl because another family member is using a P2P file sharing pr ogram, you’ll understand why the Qua lity of Service features in routers is such a breakthrough for home users and office users. QOS: Keeping Your Net Conne c[...]

WEBSHARE 243WM 57 Application : A name that identifie s an existing policy. Time Schedule : Scheduling your QOS policy to be applied. Direction : The traffic flow direction to be controlled by the QOS policy. There are two settings to be provided in the Router: ~ LAN to WAN: You want to control the traffic flow from the local network to the outside[...]

WEBSHARE 243WM 58 : Before using these buttons to edit or delete a policy, please select one policy you want to edit/delete from the radio option . : After you have configured the policies, you can pre ss this button to apply the configuration. If you want to make the change persistent in flash, choose in the left windows to save it into flash. Whe[...]

WEBSHARE 243WM 59 ~ GRE: For PPTP VPN Connections. Assigned Data rate: Assign the data ratio for this poli cy to be controlled. For examples, we want to only allow 20% of the total data trans fer rate for the LAN-to -WAN direction to be used for FTP server. Then we can specify here with data ratio = 20. If you have ADSL LINE with 256K/bps.rate, the[...]

WEBSHARE 243WM 60 Silver service (L) Class 2, Gold (010010) Silver service (M) Class 2, Silver (010100) Silver service (H) Class 2, Bronze (010110) Bronze service (L) Class 3, Gold (011010) Bronze service (M) Class 3, Silver (011100) Bronze service (H) Class 3, Bronze (011110) Local Machine IPs : The IP address values for Local LAN machines you wan[...]

WEBSHARE 243WM 61 QOS example for your Network Connection Diagram ADSL Subscription Rate Upstream: 256 kbps Downstream: 1024 Mbps Example QOS Plan :. Application IP or Ports Control Flow Data Rate Time Schedule VoIP User 192.168.1.1 Outgoing Minimal 20% with high priority for non-used bandwidth with SDCP marking Class 1 Gold Service Always FTP Seve[...]

WEBSHARE 243WM 62 Example QOS Setup[...]

WEBSHARE 243WM 63 VoIP application Voice is latency-sensitive application. Most VoIP devices are use SIP protocol and the port number will be assigned by SIP module automatic ally. Better to use fi xed IP address for catching VoIP packets as high priority. Above settings will help to improve quality of your VoIP service when traffic is full loading[...]

WEBSHARE 243WM 64 FTP Server Application Some of companies will setup FTP server for customer downloading or home user sharing their files by using FTP. LAN to WAN direction:[...]

WEBSHARE 243WM 65 WAN to LAN direction: With above settings that help to limit utilization of upstream of FTP. Time schedule also help you to only limit utilization at day time.[...]

WEBSHARE 243WM 66 HTTP Web Browsing You can control the internet web browsing by specify the HTTP 80 (8080 for some proxy server). LAN to WAN direction:[...]

WEBSHARE 243WM 67 WAN to LAN direction:[...]

WEBSHARE 243WM 68 3.6.3.6 Virtual Server When you click Virtual Server, you get the following figure. Being a natural Internet firewall, this network router protects your network from being accessed by outside users. When it needs to a llow outside users to access internal servers, e.g. Web server, FTP server, E-mail server or News server, this mod[...]

WEBSHARE 243WM 69 Application OutBound Inbound ICQ 98, 99a N/A N/A NetMeeting 2.1 a 3.01 N/A 1503 TCP, 1720 TCP VDO Live N/A N/A MIRC N/A N/A Cu-SeeMe 7648 TCP &UDP, 24032 UDP 7648 TCP &UDP, 24032 UDP PC AnyWhere 5632 UDP, 22 UDP, 5631 TCP, 65301 TCP 5632 UDP, 22 UDP, 5631 TCP, 65301 TCP Edonkey N/A 4660-4662 TCP , 4665 UDP MSN Messanger N/[...]

WEBSHARE 243WM 70 3.6.3.7 Advanced Configuration opt ions within the Advanced section are for users w ho wish to take advantage of the more advanced features of the router. Users who do not understand the features should not attempt to reconfigure their rout er, unless advised to do so by support staff. • Static Route • Dynamic DNS • VLAN Con[...]

WEBSHARE 243WM 71 E.G. 3.6.3.7.2 Dynamic DNS The Dynamic DNS function lets you alias a dynam ic IP address to a stat ic hostname, so if your ISP does not assign you a static IP address you can st ill use a domain name. This is especially useful for hosting servers via your ADSL connection, so that anyone wishing to connect to you may use your domai[...]

WEBSHARE 243WM 72 The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname. This dynamic IP address is the WAN IP address. For example, to use the service, you must first apply for an account from this free Web server http://www.dyndns.org/ . There are more than 8 DDNS servers supported. • Dynamic DNS: Select the regi[...]

WEBSHARE 243WM 73 Group individual ports into a small “Virtual” network of their own to be independent of the other ports. To add a VLAN group check on the por t to be a member to this VLAN Group, and press “ Apply ” button to execute the setting. 3.6.3.7.4 Device Management The Device Management advanced configuration setti ngs allow you t[...]

WEBSHARE 243WM 74 Embedded Web Server: HTTP Port: This is the port number the r outer’s embedded web serv er (for web-based configuration) will use. The default value is the standard HTTP port, 80. Users may specify an alternative if, for example, they are r unning a web server on a PC within their LAN. For Example: User A changes H TTP port numb[...]

WEBSHARE 243WM 75 Traps supported: Cold Start, Authentication Failure. The following MIBs are supported: • RFC 1213 (MIB-II): System group Interfaces group Address Translation group IP group ICMP group TCP group UDP group EGP (not applicable) Transmission SNMP group • RFC1650 (EtherLike-MIB): dot3Stats • RFC 1493 (Bridge MIB): dot1dBase group[...]

WEBSHARE 243WM 76 The WebShare 243WM Wireless supports both IGMP version 1 (IGMP-v1) and IGMP version 2 (IGMP-v2). At star t up, the WebShare 243WM Wireless queries all directly connected networks to gather group membership. After that, the WebShare 243WM Wireless periodically updates this information. IP mu lticasting can be enabled/di sabled on t[...]

WEBSHARE 243WM 77 Chapter 4 Troubleshooting If the Router is not functioning properly, you can refer first to this chapter for simple troubleshooting before contacting your service pr ovider. This could save you time and effort but if the symptoms persist, then consult your service provider. Problems Starting Up the ADSL Router Problem Corrective A[...]

WEBSHARE 243WM 78[...]

WEBSHARE 243WM 79 APPENDIX A Traffic Shaping Traffic Shaping is an agreement between the carrier and the s ubscriber to regulate the average rate and “burstiness” or fluctuation of data transmission over an ATM network. This agreement helps eliminate congesti on, which is important for tr ansmission of real time data such as audio and video con[...]

WEBSHARE 243WM 80 APPENDIX B Technical Features Protocols IP, NAT, ARP, ICMP, IGMP, DHCP(server, client and relay), RIP1/2 , SNTP clien t, UPnP, Telnet server, SNMP LAN port 4 x RJ45 10/100 Base-T ports WAN port RJ-11 (1 port ADSL) Antenna 3*5dBi Antennas (R-SMA) External buttons Reset/Power Button LED Indicators Power, System, WLAN, 4 X Lan, ADSL [...]

WEBSHARE 243WM 81 APPENDIX C Firmware Recovery The detail instruction in Emer gency /Failure Recovery Button 1. Recovery procedures for non-working routers (e.g. after a failed firmware upgrade flash): Hold the Emergency/Failure Recovery Butt on on the back of the modem in. Keep this button held in and turn on the modem. Once the lights on the mode[...]

WEBSHARE 243WM 82 APPENDIX D Support If you have any problems with the WebShare 243WM Wireless , please consult this manual. If you continue to have problems you should c ontact the dealer where you bought this ADSL Router. If you have any other questions you c an contact the Atlantis Land company directly at the following address: Atlantis Land Sp[...]