AEG 3531 WK-M GB 949600835 manuale d’uso

1 3531 WK-m GB 949600835 INSTRUCTION BOOK W ok burner GB[...]

2 Your New Appliance Thank you for purchasing an AEG appliance. To enable you to use your new appliance efficiently and safely, please read this instruction book carefully before installing or using the appliance, and retain for future reference. Should the appliance be transferred to a new owner please ensure this instruction book is left with the[...]

3 Contents P a ge n o For the user Y our new appliance ...................................................................................... 2 Safety information ........................................................................................ 4 Description of the product .....................................................................[...]

4 Safety inf ormation These warnings are pro vided in the interests of your safety . Ensure you fully understand them before installing or using the appliance. Y our safety is of paramount importance. If you are unsure about the meaning of these warnings contact the Customer Care Department for assistance. Installing This wok must be installed acco[...]

5 Description of the pr oduct Burner Knob Placement of grid Guide pins for grid[...]

6 The operating knob has a ring sho wing the scale of markings. Of f. Max. flame and ignition position Min. flame Operating instructions[...]

7 Burner co ver/burner ring T ogether with the b urner ring the burner cov er forms a space where the final mixture of gas and air takes place in order to make the gas b urn correctly . Please note: It is consequently very important that the burner co ver/ring is placed correctly on the burner . The burner ring has been pro vided with holes for the[...]

8 The wok-unit has a special pan support which enables use of a wok pot with curved bottom. When using cooking utensils with a flat bottom the diameter of the utensils must not be less than 26 cm.[...]

9 1. Depress and turn the control knob for the burner , the left to Max. flame 2. The ignition electrode will emit sparks, and when the mixture of gas and air is correct, the burner will be ignited. Is not possible to connect the unit to mains, a match may be used to ignite the burner 3. After starting the burner , press the control knob for approx[...]

10 Cleaning and maintenance For reasons of hygiene and safety, the cooking burner must be kept clean. Grease stains and spilled food generate smoke when heated, and can even cause fire. The splashguard can be removed to make it easier to clean the surface. What to do: 1. Hold the splashguard as shown in the diagram. 2. Lift the splashguard straight[...]

11 Stainless steel surfaces Perform daily cleaning with a slightly damp cloth. For more severe soiling, use a liquid cream. Always clean the steel in the direction of the steel finish. To ensure that the steel retains its shine, it is recommended that you use a polishing agent for stainless steel on a regular basis. Always polish in the direction o[...]

12 T ype of gas Adjusted for Natural, G-20 - 20mbar Category and pressures GB: II 2H3+ 20 - 28/37 mbar Max. nominal load Q, H S : W ok burner = 3,9 kW x 1 T otal= 3,9 kW FSD The unit features fully-secured gas taps (thermo-fuse). H S = Gross calorific value Q = Nominal load V oltage= 220-240 V AC Ignition transformer= 50 HZ - 0,6 V A CE 048 A T - 0[...]

13 This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition). Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891 Current Editions. The hob should not be install[...]

14 Gas installation In accordance with local requirements for domestic gas cooking appliances. Gas installation must only be carried out by an authorised person. For gas types see technical data. Gas connection The gas intake is situated at the lower rear of the appliance. The intake has a ½" conical pipe thread (see fig 1) If the appliance i[...]

15 Caution: In order to av oid a hazard this appliance must be installed according to these instructions for installation The hob unit can be mounted in any type of kitchen with a table surface whose thickness is between 28 mm and 40 mm. Headroom The distance to any shelv es or tops of a cabinet under the hob is to be at least 55 mm. Fixing Scre w [...]

16 It is not necessary to attach the reinforcement beam to the work top surface, as it is held in place by a specially designed moulding, which is incorporated in the hob units flanges. The units externall y measured length 145 mm: Cooker hood 290 mm: T wo-zone ceramic-top electric hob T wo-b urner gas hob Grill Fryer Wo k 580 mm: Four -zone cerami[...]

17 Something not w orking If the hob is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. IMPORTANT: If you call out an engineer to a fault caused by incorrect use or installation, a charge will be made even if the hob is under guarantee. If after all these checks, your hob still doe[...]

18 In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning: 08705 929 929 Your call will automatically be routed to the Service Centre covering your post code area. In-guarantee customers should ensure that the recommended checks under the heading "Som[...]

19 AEG of fer the follo wing guarantee to the first purchaser of this appliance: 1. The guarantee is v alid for 12 months commencing when the appliance is handed ov er to the first retail purchaser , which must be verif ied by purchase in voice or similar documentation. 2. The guarantee co vers all parts or components which fail due to faulty workm[...]

20 Before you mov e please contact your nearest Customer Care centre, listed belo w , to giv e them details of your new home. The y will then ensure that the local service organisation is a ware of your mov e and able to look after you and your appliances. France Senlis +33 (0) 344 62 29 29 Germany Nürnberg +49 (0) 800 234 7378 Italy Pordenone +39[...]

21[...]

22[...]

23[...]

24 325 88-1661 Rev . 1-405[...]