Xerox 8830 manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162

Aller à la page of

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Xerox 8830. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Xerox 8830 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Xerox 8830 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Xerox 8830 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Xerox 8830
- nom du fabricant et année de fabrication Xerox 8830
- instructions d'utilisation, de réglage et d’entretien de l'équipement Xerox 8830
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Xerox 8830 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Xerox 8830 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Xerox en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Xerox 8830, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Xerox 8830, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Xerox 8830. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    XEROX WIDE FORMAT COPY SYSTEM 8825, 8830,8850, 510 Series, 721P & X2 TECH XEROX WIDE FORMAT COPY SYSTEM User Guide AccXES Firmware Version 10.0[...]

  • Page 2

    [...]

  • Page 3

    XEROX WIDE FORMAT COPY SYSTEM Contents • i Contents Getting to know the WIDE FORMAT COPY SYSTEM 1 Getting to know the WIDE FORMAT COPY SYSTEM ............................................................. 1 Scanner standard components ............................................................................................. 3 Scanner compact co[...]

  • Page 4

    ii • Contents XEROX WIDE FORMAT COPY SYSTEM Type Photo ............................................................................................................... 42 Type, Color .............................................................................................................. 43 Background Suppression .............................[...]

  • Page 5

    XEROX WIDE FORMAT COPY SYSTEM Contents • iii Main Men u 88 Main Menu .......................................................................................................................... 88 Configuration menu ............................................................................................................ 89 LOCALIZATION .........[...]

  • Page 6

    iv • Contents XEROX WIDE FORMAT COPY SYSTEM Appendix 5 ........................................................................................................................ 151 Appendix 6 ........................................................................................................................ 151 Appendix 7 .....................[...]

  • Page 7

    XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM • 1 Getting to know the WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM This manual contains operating instructions for the user and the system administrator for the XEROX WIDE FORMAT COPY SYSTEM 8825/8830/8850/510 Series and 721P with version 10.0 AccXE[...]

  • Page 8

    2 • Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM Table 1. WIDE FORMAT COPY SYSTEM configurations Scanner Printer Controller Pr oduct Code WIDE FORMAT SCAN SYSTEM XEROX WIDE FORMAT 8825 N5T, EV4 WIDE FORMAT SCAN SYSTEM XEROX WIDE FORMAT 8830 N5T, CNG WIDE FORMAT SCAN SYSTEM XEROX WIDE FORMAT 8850 CNG, HFT WIDE FORMAT S[...]

  • Page 9

    XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM • 3 Scanner standard components The illustrations below show the components of the WIDE FORMAT SCAN SYSTEM. These com ponents are standard on the XEROX WIDE FORMAT COPY SYSTEM 8825, 8830, 8850,510 Series. And X2 TECH. The Stand is standard or optional on the 8850. With the [...]

  • Page 10

    4 • Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM WIDE FORMAT SCAN SYSTEM Front View A : Document Handler D : Stand B : Scanner Control Panel E : Productivity Document Feed - in Tray C : Thick Document Lever A . Document Handler Raise the Document Handler for routine maintenance functions and to access the optical pape[...]

  • Page 11

    XEROX WIDE FORMAT COPY SYSTEM Getting to k now the WIDE FORMAT COPY SYSTEM • 5 E . Standard Organizer The Organizer is located on the front of the Scanner. It is useful for holding multiple documents that are to be scanned. It has two extensions at its end tha t can be pulled out to accommodate longer documents (up to size E or A0). F Document Fe[...]

  • Page 12

    6 • Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM A . Standard Stacker The Stacker is located at the rear of the Scanner. When the AUTORETURN feature is set to REAR, documents exit the Scanner onto the Stacker. The Stacker can be adjusted to any one of four positions by raising or l owering it. The height of the Stacke[...]

  • Page 13

    XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM • 7 Scanner compact components The illustrations show the optional compact Stacker and organizer that are available for the WIDE FORMAT SCAN SYSTEM. The compact componen ts allow the XEROX WIDE FORMAT COPY SYSTEM to be installed in sites where space requirements are at a pr[...]

  • Page 14

    8 • Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM Rear View A : Compact Stacker[...]

  • Page 15

    XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM • 9 Scanner Control Panel The Scanner Control Panel is divided into three sections: • The options keys section, which contains the - Media Selection , Image Quality , and Reduce/Enlarge options selections • The graphical display and the navigation keys section. • The [...]

  • Page 16

    10 • Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM Control Panel Options Area The Media Selection area of the Scanner Control Panel allows you to select the media Source , Type , and Output Format . The illustration below depicts the Media Selection portion of the control panel . Media Selection[...]

  • Page 17

    XEROX WIDE FORMAT COPY SYSTEM Get ting to know the WIDE FORMAT COPY SYSTEM • 11 Source The Source option allows you to select the source of the media on which the image will be printed. To select the medi a source, press the key beneath the Source settings until the desired source indicator lamp illuminates. The Source settings are: • Sheet - T[...]

  • Page 18

    12 • Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM Output Format The Output Format option allows you to select the size to which the roll feed media will be cut. It has three modes - Manual, Preset, a nd Synchro. Manual Manual allows you to enter the desired length and width manually. To select the Manual mode: 1. Pres[...]

  • Page 19

    XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM • 13 PRESET OUTPUT FORMAT SELECT: 8.5 X 11 ANSI A 2. Press the Previous or Next key to select an item from the list. NOTE: Formats can be added or removed from this list. Refer to "Custom Media Formats" in the "Main Menu" section for more information. 3.[...]

  • Page 20

    14 • Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM The SCAN SYSTEM firmware must be at version 3.0.9 or greater to support Normal , Line , Photo , or Color Type. If the SCAN SYSTEM is not at the required version an error message. Depending on what Mode is selected (COPY or SCAN) the message will be d isplayed as show b[...]

  • Page 21

    XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM • 15 Original , Type The Type option allows you to specify the type classification of your document. To select the document type, press the key beneath the Type settings until the desired Type indicator lamp illuminates. Normal — (factory default) Select Normal for most c[...]

  • Page 22

    16 • Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM NOTE: Th e Background Suppression option cannot be used with the Photo setting. If Photo is selected, Background Suppression is automatically set to Off. Color — Select Color when scanning full color documents. When Color Type is selected a version of the follow ing [...]

  • Page 23

    XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM • 17 Background S uppression The Background Suppression option enables you to make adjustments for documents that contain poor contrast between the foreground image and the background. Four Background Suppression choices are provided: Off This setting disables Background S [...]

  • Page 24

    18 • Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM Background Suppression can operate in either the dynamic or static mode based on the whether the DYNAMIC BACKGROUND REMOVAL is enabled, check mark in the box or disabled, no check mark in the box. Reference Menu CONFIGURATION>IMAGE ENHANCEMENT. IMAGE ENHANCEMENT COL[...]

  • Page 25

    XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM • 19 The Reduce/Enlarge area of the Scanner Control Panel allows you to select one of three reduct ion/enlargement modes - Auto , Manual , and Preset . The illustration below depicts the Reduce/Enlarge portion of the Control Panel. NOTE: Reduce/Enlarge can only be selected [...]

  • Page 26

    20 • Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM NOTE: If the indicator lamp is already lit, press the key once to display the screen. MANUAL REDUCTION/ENLARGEMENT ENTER (25.0 – 400.0): 100.0% 2. Enter a reduction/enlargement between 25 and 400. You can select any value between these limits in 0.1% increments. 3. P[...]

  • Page 27

    XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM • 21 NOTE: Refer to "Media Series" in the "Main Menu" section for mor e information about enabling media series and defining custom presets. 3. Press the Enter key to confirm your choice and return to the READY screen. The READY screen now displays the n[...]

  • Page 28

    22 • Getting to know th e WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM Next The Next key highlights the following item in a displayed list. Enter The Enter key either confirms the selection of the currently highlighted item or confi rms an entered numeric value. Exit The Exit key cancels a selection operation and returns you to a previou[...]

  • Page 29

    XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM • 23 The right side of the Scanner Control Panel contains a numeric keypad for entering quantities, keys for selecting other features, and keys for controlling the scanning and printing of images. To the left of some of the keys are indicator lamps that illuminate when the [...]

  • Page 30

    24 • Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM • When in READY TO BUILD SET mode, pressing this key brings up the scanned document ( Refer to Sets Build key section of this manual for additional information ). • When in the entry state for numeric entry fields, pressing this key acts as a backspace/delete key. [...]

  • Page 31

    XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM • 25 The Printer and the Controller For detailed operating instructions about the Printer and Controller comp onents of the WIDE FORMAT COPY SYSTEM and about network connectivity, refer to the documentation listed below. • The XEROX WIDE FORMAT 8825/8830 Printer Operator [...]

  • Page 32

    26 • Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM To switch on the Scanner, press the Power On/Off Switch on t he back of the Scanner to the On (I) position as shown below. Wait for 30 seconds or until a P is displayed on the status LED. When the Scanner is switched on, the fluorescent lamp inside the Scanner illumina[...]

  • Page 33

    XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM • 27 A : Controller B : Circuit Breaker switch C : Printer Power Switch[...]

  • Page 34

    28 • Gett ing to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM NOTE: Ensure that the Scanner is switched on first and the P is displayed in t he Status Indicator window. The HFT Controller has its own power switch. When powering it on, first power on the Controller and then power on the Printer. Switching on the HFT Controller an[...]

  • Page 35

    XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM • 29 NOTE: Ensure that the Scanner is switched on first and the P is displayed in the Status Indicator window before powering on the Controller. The KLF Controller and the X2 TECH printer each have their own power switch. When powering them on, first power on the printer, t[...]

  • Page 36

    30 • Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM Powering off the System To power off the WIDE FORMAT COPY SYSTEM, do the following: 1. Power off the Controller and the Printer. • For the 8825/8830/8850/510 Series, switch the Circuit Breaker Switch to the Off (O) position. Then switch the Print er Switch to the Off[...]

  • Page 37

    XEROX WIDE FORMAT COPY SYSTEM Document quality • 31 Document quality Document quality Document quality is the primary factor in obtaining good copies from scanned originals. For most documents, the four Background Suppression key selections with DYNAMIC BACKGROUND R EMOVAL enabled, which is the default setting, provides an accurate copy. Some doc[...]

  • Page 38

    32 • Document quality XEROX WIDE FORMAT COPY SYSTEM REMOVAL will automatically make the appropriate compensation to optimize the reproduction of the dark details. If the input document has a faded background, the feature will enable a faithful reproduction of the original. However, the faded background must be inserted with the fading running in [...]

  • Page 39

    XEROX WIDE FORMAT COPY SYSTEM Document quality • 33 Determining document quality Some documents require additional adjustments to obtain the best copy quality. Documents of good quality are easy to scan and usually give good copies on the first attempt. Documents of bad quality may require more than one attempt, using different settings, to obtai[...]

  • Page 40

    34 • Document quality XEROX WIDE FORMAT COPY SYSTEM • The document has creases, folds, stains, tears, or extraneous marks that the Scanner might interpret as foreground. Preparing documents When prepar ing documents for scanning, keep the following points in mind: If documents have been stored rolled up, flatten them out. They will be much easi[...]

  • Page 41

    XEROX WIDE FORMAT COPY SYSTEM Document quality • 35 Scanning strategies When scanning documents, always try the default I mage Q uality settings first. S elect the documents type - , line, photo, mixed or color and use the Original, Type , Normal , Line , Photo or Color default settings for that type. Color is a Scan to Net feature and only avail[...]

  • Page 42

    36 • Document quality XEROX WIDE FORMAT COPY SYSTEM Type of original First step to try Second step to try Third step to try Line, photo or mixed original on film, clear film, vellum/tracing or other translucent media Set Background Suppression to (light) and Normal . Select Photo for photo and select Line for line drawing. Use No rmal for mixed d[...]

  • Page 43

    XEROX WIDE FORMAT COPY SYSTEM Image Quality • 37 Image Quality The Image Quality area of the Scanner Control Panel allows you to make adjustments for both the type of Original document and the output Copy to produce the best possible copy quality. It contains selections for Original (Document): Type and Background Suppression , and Copy options l[...]

  • Page 44

    38 • Im age Quality XEROX WIDE FORMAT COPY SYSTEM Original, Type Type The Type option allows you to specify the type classification of your document. To select the document type, press the key beneath the Type settings un til the desired Type indicator lamp illuminates. NOTE: The SCAN OPTIONS will not be displayed unless the Scan to Net feature i[...]

  • Page 45

    XEROX WIDE FORMAT COPY SYSTEM Image Quality • 39 IMAGING screen IMAGING AUTO-ROTATE 4 REDUCTION LINE PRESERVATION REDUCTION LINE PRESERVATION — fine lines i n the original document are preserved when reducing images during copying in Normal and Line mode sonly. IMAGE ENHANCEMENT screen. IMAGE ENHANCEMENT COLOR IQ : SRGB IMAGE ENHANCEMENT COLOR [...]

  • Page 46

    40 • Image Quality XEROX WIDE FORMAT COPY SYSTEM SCAN MODE Normal mode attempts to reproduce the document being scanned to provide the best image quality including halftones and shadings as well as fine lines. To select the scan options for Color Mode: 1. Pr ess the Mode key. The Please Enter Directory screen is displayed. 2. Enter the Directory [...]

  • Page 47

    XEROX WIDE FORMAT COPY SYSTEM Image Quality • 41 Line — Select Line for an image containing text, line art, or a mixture of these. If the COPY mode is selected the READY TO COPY screen will be displayed. If the Mode selected is SCAN , and the Scan to Net Feature Key is installed, the SC AN OPTION (LINE) screen will be displayed. SCAN OPTIONS (L[...]

  • Page 48

    42 • Image Quality XEROX WIDE FORMAT COPY SYSTEM Select Photo when the document contains a gray scale or color image, such as a photograph. When Photo is selected in the Scan Mode, the screen below will b e displayed. The screen provides additional options for the user SCAN OPTIONS (PHOTO) 4 COMPRESSION: FILE FORMAT: RAW TIFF PREVIEW The SCAN OPT[...]

  • Page 49

    XEROX WIDE FORMAT COPY SYSTEM Image Quality • 43 4. Do one of the following: • For PREVIEW, press the Enter key to e nable or disable the option. A check mark appears in the box to the left of the option when the option is enabled. The factory default setting is enabled. • For COMPRESSION, press the Previous or Next key to highlight the desir[...]

  • Page 50

    44 • Image Quality XEROX WIDE FORMAT COPY SYSTEM • INDEX - Saves the document as 8 - bit indexed RGB (using thresholding) compressed with PACKBITS. • INDEX ED - Saves the document as 8 - bit in dexed RGB (using error diffusion) compression with PACKBITS SCAN OPTIONS (COLOR) ü COMPRESSION: FORMAT: : PACKBITS : TIFF PREVIEW SCAN OPTIONS (COLOR[...]

  • Page 51

    XEROX WIDE FORMAT COPY SYSTEM Image Quality • 45 • NORMAL - Saves a document at an average compression ratio and has average image quality. • BEST COMPRESSION - Saves a document at a higher compression ratio but has a lower image quality Background Suppression The Background Suppression enables you to make adjustments for documents that conta[...]

  • Page 52

    46 • Image Quality XEROX WIDE FORMAT COPY SYSTEM indicator lamp for the selected contrast setting illuminates. The middle contrast setting is the factory default setting. You can use this feature to further adjust the effects of the Type and Background Suppression selections. The feature operates with all four Background Suppression modes.[...]

  • Page 53

    XEROX WIDE FORMAT COPY SYSTEM Making copies • 47 Making copies Making copies When the Graphical Display indicates READY TO COPY, the WIDE FORMAT COPY SYSTEM is ready to make copies. NOTE : The X2 TECH printer does not curre ntly support the Copying mode. Several settings are available for controlling how the Scanner starts and finishes a scan. Th[...]

  • Page 54

    48 • Making copies XEROX WIDE FORMAT COPY SYSTEM READY position at the completion of the scan. When the DOCUMENT RETURN feature is set to REAR, the Scanner delivers the document to the rear Stack er at the completion of the scan. Some documents will always exit to the rear at the completion of the scan regardless of the DOCUMENT RETURN setting. T[...]

  • Page 55

    XEROX WIDE FORMAT COPY SYSTEM Making copies • 49 The Image Quality area of the Scanner Control Panel allows you to make adjustments for both the type of original document and the output copy to produce the best possible image quality. It contains selections for Original (Document): Type and Background Suppression, and Copy options lighter or dark[...]

  • Page 56

    50 • Making copies XEROX WIDE FORMAT COPY SYSTEM Making a copy with the default settings When the default document settings are used, the display ind icates that the roll of media that best fits the size of the original document will be automatically selected. The reduction/ enlargement setting is 100%, so the copy will be the same size as the or[...]

  • Page 57

    XEROX WIDE FORMAT COPY SYSTEM Making copies • 51 starting position. It then scans t he document. The resulting image is electronically sent to the Printer and your copy is printed. NOTE: If AUTOSCAN is disabled, you will need to press the Start key to begin the scan. Refer to "Controlling the scan" on the previous page. NOTE: If the PR [...]

  • Page 58

    52 • Making copies XEROX WIDE FORMAT COPY SYSTEM image so that no image rotation is required. This w ill achieve the fastest processing time. For example, if an A - size copy is required on a 12 - inch (30.48 cm) roll, feed the original with the short edge first, not the long edge first. If a B - size copy is required on a 17 - inch roll, feed th[...]

  • Page 59

    XEROX WIDE FORMAT COPY SYSTEM Scanning when using a Folder • 53 Scanning when using a Folder Scanning when using a Folder When using a Folder, the document must be inserted in the correct orientaqtion in order to have the title block visible after the copy is folded. Refer to the Finisher k ey information in the Special feature keys section of th[...]

  • Page 60

    54 • Sca nning when using a Folder XEROX WIDE FORMAT COPY SYSTEM When the Finisher key is pressed and the finishing o ptions are selected a new page icon is added to the READY TO COPY screen. The page icon is displayed with a dotted box at one of the page corners. The dotted box indicates the title block location selection made using the Finisher[...]

  • Page 61

    XEROX WIDE FORMAT COPY SYSTEM Scanning oversized documents • 55 Scanning oversized documents Scanning oversized documents An oversized document i s defined as any document that is larger in width or length than a standard E - size (A0) document. LONG DOCUMENTS Operator assistance will be required to guide and control the position of a long docume[...]

  • Page 62

    56 • Special features keys XEROX WIDE FORMAT COPY SYSTEM Special features keys Special features keys There are many enhanced features for making copies that meet special needs. The keys that control these features are on the right side of the Scanner Control Panel. To enable a feature, press the applicable key. If the feature has an associated sc[...]

  • Page 63

    XEROX WIDE FORMAT COPY SYSTEM Special features keys • 57 Stop Start 1 Transform Sample Printer Interrupt Store/ Recall Batch Sets Build Finisher A B C 4 5 6 7 8 9 3 0 C/CA /. 2 D E F G H I J K L M N O P R S T U V W X Y Printer Interrupt key Jobs on the WIDE FORMAT COPY SYSTEM have the following priority: 1. Any job currently printing 2. A copy jo[...]

  • Page 64

    58 • Special features keys XEROX WIDE FORMAT COPY SYSTEM Store/Recall key The Store/Recall feature contains the following menu choices: • LAST JOB - Enables you to recall and reuse the informati on from the last copy job. • JOB TEMPLATES - Enables you to save the settings from previous jobs in memory as templates. • SAVE DEFAULT TEMPLATE - [...]

  • Page 65

    XEROX WIDE FORMAT COPY SYSTEM Special features keys • 59 2. Press the Enter key to select LAST JOB. The LAST JOB menu screen is displayed. The selected option is highlighted. LAST JOB RECALL LAST JOB DELETE LAST JOB 3. Press the Previous or Next key to highlight the desired option. 4. Press the Enter key to select the highlighted option. The scre[...]

  • Page 66

    60 • Special features keys XEROX WIDE FORMAT COPY SYSTEM 1. Press the Store/Recall key. The STORE/RECALL menu screen is displayed. 2. Press the Enter key to select LAST JOB. The LAST JOB menu screen is displayed. 3. Press the Next key to highlight DELETE LAST JOB. 4. Press the Enter key to select DELETE LAST JOB. A delete confirmation screen is d[...]

  • Page 67

    XEROX WIDE FORMAT COPY SYSTEM Special features keys • 61 JOB TEMPLATES RECALL TEMPLATE SAVE TEMPLATE DELETE TEMPLATE 4. Press the Previous or Next key to highlight the desired option. 5. Press the Enter key to select the highlighted option. The screen for the selected option is displayed. The RECALL TEMPLATE option allows you to recall job parame[...]

  • Page 68

    62 • Special features keys XEROX WIDE FORMAT COPY SYSTEM You can now use the parameter settings as they have been recalled, or you may change some of them. NOTE: If yo u change any of the Image Quality settings (i.e., document type, background suppression, or copy contrast) or if you want to invert the image, an error message will advise you to r[...]

  • Page 69

    XEROX WIDE FORMAT COPY SYSTEM Special features keys • 63 NOTE: You can replace the contents of a used location with the current job settings information. If you choose a location that already contains information, the TEMPLATE IS IN USE screen is displayed as shown below. Press the Enter key to overwrite the contents. Press the Exit key to cancel[...]

  • Page 70

    64 • Special feature s keys XEROX WIDE FORMAT COPY SYSTEM The SAVE DEFAULT TEMPLATE option of the STORE/RECALL menu enables you to save the settings for the current job as the default settings. Each additional job will then have these settings established as the default selections. To sa ve the current job settings as the default template: 1. Ens[...]

  • Page 71

    XEROX WIDE FORMAT COPY SYSTEM Special features keys • 65 Finisher key A finishing device, such as a folder, can be connected to the WIDE FORMAT COPY SYSTEM If such a device is connected, the Finisher key en ables or disables that device. To enable/disable a finishing device: 1. Press the Finisher key. The Finisher indicator lamp illuminates and t[...]

  • Page 72

    66 • Special features keys XEROX WIDE FORMAT COPY SYSTEM page for an illustration and description of each option. Also refer to the Folder User Documentation for additional information on the available folding options. 4. Press the Previous or Ne xt key to scroll through the choices for the selected option. 5. When the desired choice is highlight[...]

  • Page 73

    XEROX WIDE FORMAT COPY SYSTEM Special features keys • 67 OVERLENGTH OPTIONS OVERLENGTH: NO FOLD The TAB OPTIONS option enables you to override the pre - programmed tab settings for the selected finishing program. The choices are ALWAYS ON, ALWAYS OFF, and USE PROGRAM SETTING. USE PROGRAM SETTING is the factory default setting. TAB OPTIONS TAB: US[...]

  • Page 74

    68 • Special features keys XEROX WIDE FORMAT COPY SYSTEM choices are ALWAYS ON, ALWAYS OFF, and USE PRO GRAM SETTING. USE PROGRAM SETTING is the factory default setting. CROSSFOLD OPTIONS CROSSFOLD: USE PROGRAM SETTING The TITLE BLOCK LOCATION option enables you to specify the location of the title block for the copy jobs that are about to be run[...]

  • Page 75

    XEROX WIDE FORMAT COPY SYSTEM Special features keys • 69 The OUTPUT BIN option enables you to specify which finisher output bin to use for the finished output. The choices are DON'T CARE, BIN X (where X equals 1 to the actual number of finisher bins), FANFOLD, and BYPASS. BYPASS is the factory default setting. OUTPUT BIN OUTPUT BIN : BYPASS [...]

  • Page 76

    70 • Special features keys XEROX WIDE FORMAT COPY SYSTEM 2. Press the Previous or the Next key to select FORWARD or REVERSE collation. • FORWARD prints the collated set in the order that the sheets were scanned. Page 1 will be on the top. PRINTED 1 2 3 SCANNED 1 2 3 • REVERSE prints the set i n the reverse order that they were scanned. Page 1[...]

  • Page 77

    XEROX WIDE FORMAT COPY SYSTEM Special features keys • 71 7. Enter the number of copies desired and press the Start key. The Printer prints the number of sets requested. NOTE: In COLLATION FORW ARD only, an extra set is made as a check plots set. After the printing of the set, the set can be recalled, the values changed again, and the set reprinte[...]

  • Page 78

    72 • Special features keys XEROX WIDE FORMAT COPY SYSTEM Transform key The Transform feature contains the following menu choices: • MARGINS - Allows you to adjust the dimensions of the margins around the image. By entering p ositive margins, blank space is inserted around the image. By entering negative values, unwanted parts of the image can b[...]

  • Page 79

    XEROX WIDE FORMAT COPY SYSTEM Special features keys • 73 Margins are added to the image in one of two ways: • If S ynchro has been selected from the Output Format area of the Scanner Control Panel, the lead margin is added before the image is printed. The trail margin is added after the media cut signal is received from the Scanner. Thus, the l[...]

  • Page 80

    74 • Special features keys XEROX WIDE FORMAT COPY SYSTEM LEAD + 1.0 IN LEFT - 1.0 IN RIGHT + 0.0 IN TRAIL + 0.0 IN The illustration below shows a negative left margin with TOP LEFT justification. • To change the v alue setting, use the numeric keypad to enter the value. The values can be set in increments of 0.1 in (1.0 mm) and over a range of [...]

  • Page 81

    XEROX WIDE FORMAT COPY SYSTEM Special features key s • 75 4. Press the Previous or the Next key to select the X (horizontal) or Y (vertical) coor dinate. 5. Press the Enter key to confirm your choice. 6. Press the Previous or Next key to select a choice for justification. For the X direction, the choices are LEFT, CENTER, and RIGHT. For the Y dir[...]

  • Page 82

    76 • Special features keys XEROX WIDE FORMAT COPY SYSTEM Table 4. Mirror transformations Axis Transform X Y XY OFF 6. Press the Enter key to confirm your choice. The graphical display updates accordingly. The illustration below shows the TRANSFORM screen with "X" as the mirror image selection. TRANSFORM MIRROR : X INVERT : OFF NOTE: To [...]

  • Page 83

    XEROX WIDE FORMAT COPY SYSTEM Special features keys • 77 TRANSFORM MIRROR: OFF INVERT : OFF 4. Press the Next key to highlight INVERT. 5. Press the Enter key to select INVERT. 6. Press the Previous or Next key to turn the option ON or OFF. 7. Press the Enter key to confirm your choice. The graphical display updates accordingly. When INVERT is ON,[...]

  • Page 84

    78 • Special features keys XEROX WIDE FORMAT COPY SYSTEM and the Printer Interrupt indicator lamp illuminates. The Printer immediately prints a sample of the next image inserted into the Scanner. The SAMPLE MODE screen is displayed. SAMPLE MODE PRESS START TO ACCEPT PAGE. PRESS C/CA TO REJECT. 2. Do one of the following: • Press the Start key t[...]

  • Page 85

    XEROX WIDE FORMAT COPY SYSTEM Special features keys • 79 5. Press the Enter key to enable SCAN IMAGE TO PRINTER. Press the Exit key to exit the menu. The proce ssing time for Scan to Printer images will be longer, depending on the image size.[...]

  • Page 86

    [...]

  • Page 87

    XEROX WIDE FORMAT COPY SYSTEM Scanning to the Network (SCAN mode) • 81 Scanning to the Network (SCAN mode) Scanning to the Network (SCAN mode) The WIDE FORMAT COPY SYSTEM has two scanning modes of operation: COPY mode and SCAN mode. NOTE: The SCAN mode is optional on the XEROX WIDE FORMAT COPY SYSTEM 8825. X2 TECH Color Scan - to - Net is an avai[...]

  • Page 88

    82 • Scanning to the Network (SCAN mode) XEROX WIDE FORMAT COPY SYSTEM automatically. For more information, refer to the AccXES Client Tools User Guide. Other remote retrieval programs can use the File Transfer Protocol (FTP) to retrieve and delete files from the WIDE FORMAT COPY SYSTEM hard disk over the network. These other programs will copy t[...]

  • Page 89

    XEROX WIDE FORMAT COPY SYSTEM Scanning to the Network (SCAN mode) • 83 Understanding the READY TO SCAN screen Below is an example of the READY TO SCAN screen. Following the example are descriptions of the special information displayed on the screen. READY TO SCAN INSERT DOCUMENT 400 TIFF/CCITTG4 1 1 BIT TIFF/CCITTG 41 BIT This area indicates the [...]

  • Page 90

    84 • Scanning to the Network (SCAN mode) XEROX WIDE FORMAT COPY SYSTEM • Specifying the output format - The image file always has the format of the length of the document by the sc an width. The scan width can be manually specified, if the entire width of the document is not desired. Refer to "Scanner Control" in the "Main Menu&q[...]

  • Page 91

    XEROX WIDE FORMAT COPY SYSTEM Scanning t o the Network (SCAN mode) • 85 NOTE: To print a Sample in the next Step on an X2 TECH, the Scan - to - print feature key must be installed. For more information, refer to the Sample key section, Scan Mode Sample. 5. To view a sample of the file before it is scan to a file, Press the Sample key on the Contr[...]

  • Page 92

    86 • Scanning to the Network (SCAN mode) XEROX WIDE FORMAT COPY SYSTEM Clearing the scanned images The C / CA key enables you to remove scanned images from the WIDE FORMAT COPY SYSTEM hard disk. To clear scanned images: 1. Press the C/CA key. The CLEAR SCANNED IMAGE screen is displayed. CLEAR SCANNED IMAGE DO NOT CLEAR IMAGE 2. Press the Previous[...]

  • Page 93

    XEROX WIDE FORMAT COPY SYSTEM Scanning to the Network (SCAN mode) • 87 • Deleting all of the images currently stored on the hard disk. Refer to "File System" in the "Main Menu" section of this manual for complete information about the above functions.[...]

  • Page 94

    88 • Main Menu XEROX WIDE FORMAT COPY SYSTEM Main Menu Main Menu The Main Men u provides options for configuring the system, obtaining system information, performing system administration functions, and running system diagnostics. When you access the Main Menu, a menu containing the following sub - menus is displayed: • CONFIGURATION - Enables [...]

  • Page 95

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 89 The MAIN MENU screen is displayed. The black arrows indicate that the menu list contains more items than are visible. The selected option is highlighted. MAIN MENU CONFIGURATION SYSTEM INFORMATION SYSTEM ADMINISTRATION 2. Press the Previous or Next key to scroll through the list options. 3. When the de[...]

  • Page 96

    90 • Main Menu XEROX WIDE FORMAT COPY SYSTEM CONFIGURATION LOCALIZATION CONTROL PANEL COPY OPTIONS 3. Press the Previous or Next key to scroll through the list of options. 4. When the desired option is highlighted, press the Enter key to select the options. The menu or screen for the selected option is displayed. The LOCALIZATION option of the CO[...]

  • Page 97

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 91 The CONTROL PANEL option of the CONFIGURATION menu controls whether the beeper is used for the key click and invalid entry beeps. It al so allows selection of the font display style and the default mode of operation for the WIDE FORMAT COPY SYSTEM. To set the beeper, text style or default operating mod[...]

  • Page 98

    92 • Main Menu XEROX WIDE FORMAT COPY SYSTEM The COPY OPTIONS option of the CONFIGURATION menu provide s a sub - menu of the following choices: • MEDIA SERIES - Sets the standard media sizes for preset output formats. Table 5 on the below shows the standard media series and the sizes associated with them. • CUSTOM MEDIA FORMATS - Sets the cus[...]

  • Page 99

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 93 Table 5. Media sizes Choose Series To Display Sizes Di mensions (width x length) ANSI A 8.5 x 11 inches (215.9 x 279.4 mm) B 11 x 17 inches (279.4 x 431.8 mm) C 17 x 22 inches (431.8 x 558.8 mm) D 22 x 34 inches (558.8 x 863.6 mm) E 34 x 44 inches (836.6 x 1117.6 mm) ARCH A 9 x 12 inches (228.6 x 304.8[...]

  • Page 100

    94 • Main Menu XEROX WIDE FORMAT COPY SYSTEM 5. Press the Enter key to select MEDIA SERIES. The MEDIA SERIES screen is displayed. Below is an example of the MEDIA SERIES screen. MEDIA SERES ANSI ISO A ARCH ISO B JIS B 6. Press the Previous or Next key to highlight a media series. 7. Press the En ter key to ENABLE or DISABLE the highlighted media [...]

  • Page 101

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 95 Below is an example of the MEDIA SERIES screen. In the example, the display units have been set to inches. CUSTOM MEDIA FORMATS (IN) 0.0 X 0.0 0.0.X 0.0 0.0 X 0.0 0.0.X 0.0 0.0 X 0.0 0.0.X 0.0 7. Press the Previous or Next key to highlight the desired field. 8. Use the numeric keypad to enter the value[...]

  • Page 102

    96 • Main Menu XEROX WIDE FORMAT COPY SYSTEM The CUSTOM R/E PRESETS option controls which reduction/enlargement ratios are displayed when Preset is selected from the Reduction/Enlargement portion of the Scanner Cont rol Panel. You can specify up to six reduction/enlargement presets. To specify a reduction/enlargement preset: 1. Press the Menu key[...]

  • Page 103

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 97 1. Press the Menu key. The MAIN MENU screen is displayed. 2. Press the Enter key to select CONFIGURATION. The CONFIGURATION menu screen is displayed. 3. Press the Next key until COPY OPTIONS is highlighted. 4. Press the Enter key to select COPY OPTIONS. The COPY OPTIONS menu screen is displayed. 5. Pre[...]

  • Page 104

    98 • Main Menu XEROX WIDE FORMAT COPY SYSTEM IMAGE ENHANCEMENT COLOR IQ : SRGB IMAGE ENHANCEMENT COLOR IQ : 4 DYNAMIC BACKGROUND REMOVAL SRGB NORMAL MODE: BEST IQ 6. Press the Next key to select the enhancement option you want: • NONE: scanned color has no color correction applied. • SRGB: scanned colors will be converted to the SRGB color sp[...]

  • Page 105

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 99 NOTE: To prevent images from being lost, feature time - outs will not occur during the sets build process. • PRINTER INTERRUPT - Controls how long the Printer remains in t he interrupted state with no interruption at the Scanner Control Panel. This timer pertains to print jobs that have been interrup[...]

  • Page 106

    100 • Main Menu XEROX WIDE FORMAT COPY SYSTEM To adjust the power saver: 1. Press the Menu key. The MAIN MENU screen is displayed. 2. P ress the Enter key to select CONFIGURATION. The CONFIGURATION menu screen is displayed. 3. Press the Next key until POWER SAVER is highlighted. 4. Press the Enter key to select POWER SAVER. The POWER SAVER screen[...]

  • Page 107

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 101 the media guidelines on the Feed - in Tray . The width sensors eliminate the need for a prescan thereby increasing the overall throughput of the system resulting in higher productivity. When this feature is used the operator must select the media series, ANSI, ARCH, ISO A, ISO B JIS B and CUSTOM etc s[...]

  • Page 108

    102 • Main Menu XEROX WIDE FORMAT COPY SYSTEM CUSTOM MEDIA FORMATS (IN) 0.0 X 0.0 0.0.X 0.0 0.0 X 0.0 0.0.X 0.0 0.0 X 0.0 0.0.X 0.0 8. Press the Exit key to return to the CONFIGURATION menu screen.[...]

  • Page 109

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 103 System Information menu The SYSTEM INFORMATION option of the MAIN MENU contains the following menu choices: • SYSTEM DESCRIPTION - Provides information about each component connec ted to the WIDE FORMAT COPY SYSTEM. • RECENT FAULT LIST - Displays the most recent faults related to the Scanner. • [...]

  • Page 110

    104 • Main Menu XEROX WIDE FORMAT COPY SYSTEM SYSTEM DESCRIPTION SCANNER CONTROLLER CONTROL PANEL 5. Press the Previous or Next key to highlight the component about which you want to view information. 6. Press the Enter key to select the highlighted component. The screen for the selected component is displayed. Following are examples of the scree[...]

  • Page 111

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 105 NOT E: The XXXX represents the Printer name 721 FINISHER MODEL: NOTE: This screen identifies the F inisher, if any. If there is no finisher, the MODEL is displayed as NONE. If a Folder is connected, the FINISHER screen displays the configuration of the connected Folder. 7. Press the Exit key to return[...]

  • Page 112

    106 • Main Menu XEROX WIDE FORMAT COPY SYSTEM The CONFIGURATION PRINTS option of the SYSTEM INFORMATION menu allows you to print one of the following selections: • Copier Configuration • Printer Configuration • Printer Settings • All of the above. To print a configuration print: 1. Press the Menu key . The MAIN MENU screen is displayed. 2[...]

  • Page 113

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 107 PRINTER CONFIGURATION QUEUE TO PRINTER : YES PRINTER SETTINGS QUEUE TO PRINTER : YES ALL CONFIGURATION PRINTS QUEUE TO PRINTER : YES 9. Press the Exit key to return to the CONFIGURATION PRINTS screen.[...]

  • Page 114

    108 • Main Menu XEROX WIDE FORMAT COPY SYSTEM System Administration menu The SYSTEM ADMINISTRATION option of the MAIN MENU is reserved for the system administrator. It can be accessed only after entering the system administration password. When this option is selected, the system administrator is immediately prompted for a password. See "Ent[...]

  • Page 115

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 109 SYSTEM ADMINISTRATION JOB ACCOUNTING MODE FILE SYSTEM CHANGE PASSWORD SECURITY SETTINGS NOTE: If an incorrect password is entered, an error message will be displayed as shown below. Enter the password again. SYSTEM ADMINISTRATION PASSWORD: ***** INVALID PASSWORD, RE-ENTER 6. Press the Previous or Next[...]

  • Page 116

    110 • Main Menu XEROX WIDE FORMAT COPY SYSTEM 3. Press the Enter key to select FILE SYSTEM. The FILE SYSTEM menu screen is displayed. FILE SYSTEM LIST BY DIRECTORY DELETE IMAGES DELETE ALL IMAGES 4. Press the Previous or Next key to highlight the desired option. 5. Press the Enter key to select the highlighted option. The LIST BY DIRECTORY option[...]

  • Page 117

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 111 5. Press the Exit key to retu rn to the FILE SYSTEM menu screen. The DELETE IMAGE option allows the system administrator to delete all the images stored for a particular account. To delete stored images by account: 1. Access the SYSTEM ADMINISTRATION m enu. See "Entering the system administration[...]

  • Page 118

    112 • Main Menu XEROX WIDE FORMAT COPY SYSTEM DELETE IMAGES DIRECTORY: IMAGES DELETED Images o 10. Pr ess the Exit key to return to the FILE SYSTEM menu screen. The DELETE ALL IMAGES option allows the system administrator to delete all the images stored on the file system. To delete all stored images: 1. Access the SYSTEM ADMINISTR ATION menu. Se[...]

  • Page 119

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 113 The CHANGE PASSWORD option of the SYSTEM ADMINISTRATION menu allows the system administrator to change the system administration password. The default system administration password on all newly delivered machines, is 0 (zero). The system admini strator is required to change the password after the ini[...]

  • Page 120

    114 • Main Menu XEROX WIDE FORMAT COPY SYSTEM 7. Press the Enter key to confirm the new password. The CHANGE PASSWORD screen will instruct you to re - enter the new password. CHANGE PASSWORD RE-ENTER NEW PASSWORD: 8. U se the numeric keypad to re - enter the new password. The password will display as asterisks. 9. Press the Enter key to confirm t[...]

  • Page 121

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 115 Diagnostics menu The DIAGNOSTICS op tion of the Main Menu contains the following menu choices: • USAGE METERS - Enables you to view usage information for documents scanned and media printed. • CLEAR SCANNER USAGE - Enables the Customer Service Engineer to reset to zero the usage value for docume n[...]

  • Page 122

    116 • Main Menu XEROX WIDE FORMAT COPY SYSTEM Select the USAGE METERS option of the DIAGNOSTICS menu to view the total system usage for documents scanned and media p rinted. To view area and media usage: 1. Press the Menu key. The MAIN MENU screen is displayed. 2. Press the Next key until DIAGNOSTICS is highlighted. 3. Press the Enter key to sele[...]

  • Page 123

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 117 The SCANNE R DIAGNOSTICS option of the DIAGNOSTICS menu provides a sub - menu of the following choices: • IMAGE PATH - Enables you to validate the operation of the image processing (IP) card and the image bar. • SCAN BAR - Enables you to calibrate the response of the scan bar. • FULL SYSTEM TEST[...]

  • Page 124

    118 • Main Menu XEROX WIDE FORMAT COPY SYSTEM SCANNER DIAGNOSTICS IMAGE PATH SCAN BAR FULL SYSTEM 6. Press the Previous or Next key to scroll through the list of options. 7. When the desired option is highlighted, press the Enter key to select th e option. The menu or screen for the selected option is displayed. Select the IMAGE PATH option to va[...]

  • Page 125

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 119 Select the SCAN BAR option to calibrate the response of the scan bar. To run the SCAN BAR diagnostic: 1. Press the Menu key. The MAIN MENU screen is displayed. 2. Press the Next key until DIAGNOSTICS is highlighted. 3. Pr ess the Enter key to select DIAGNOSTICS. The DIAGNOSTICS menu screen is displaye[...]

  • Page 126

    120 • Main Menu XEROX WIDE FORMAT COPY SYSTEM FULL SYSTEM TEST A) B) C) D) E) F) G) H) I) PRESS START TO BEGIN Nine sub - tests are included in the system test. Each letter on the screen corresponds to a sub - test as follows: a) Post Test 5 - NVM (Non Volatile Memory) Verification b) Post Test 6 - Motor Communications c) Post Test 7 - SCVM Code [...]

  • Page 127

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 121 The RESET NVR DEFAULTS option is for use by the Customer Service Engineer only and requires the entry of the diagnostic password. It allows the Customer Service Engineer to reset the NVR values to the factory default values. If you select this option, the RESET NVR DEFAULTS screen is displayed. You ca[...]

  • Page 128

    122 • Main Menu XEROX WIDE FORMAT COPY SYSTEM SCANNER RELIABILITY METER LINEAR SCAN (FT): 5678 COLOR (FT): 0 8. Press the Exit key to return to the SCANNER DIAGNOSTICS menu screen. Select the SCANNER FAULTS (ORDERED) option to view the entries in the internal Scanner Fault Log. To run the SCANNER F AULTS (ORDERED) diagnostic: 1. Press the Menu ke[...]

  • Page 129

    XEROX WIDE FORMAT COPY SYSTEM Mai n Menu • 123 The entries are presented three to a screen. You can view all valid entries in the Scanner Fault Log from this screen. Empty log entries are not displayed. 9. When finished viewing the fault data, press the Exit key to return to the SCANNER DIAGNOSTICS menu screen. Select the SC ANNER FAULTS (COUNT) [...]

  • Page 130

    124 • Main Menu XEROX WIDE FORMAT COPY SYSTEM The CLEAR SCANNER FAULT LOG option is for use by the Customer Service Engineer only and requires the entry of the diagnostic password. It allows the Customer Service Engineer to erase the co ntents of the Scanner Fault Log. If you select this option, the CLEAR SCANNER FAULT LOG screen is displayed. Yo[...]

  • Page 131

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 125 • LAMP - Enables you to turn the lamp on and off and receive a feedback from the illumination sensor. • CALIBRATION MOTOR - Enables you to test the calibration zone motor. To access the COMPONENT TESTS menu: 1. Press the Menu key. The MAIN MENU screen is displayed. 2. Press the Next key until DIAG[...]

  • Page 132

    126 • Main Menu XEROX WIDE FORMAT COPY SYSTEM MOTOR SPEED EXPECTED LENGTH : 610 MEASURED LENGTH: 0 PRESS START TO ADJUST SPEED Select the LEAD EDGE/TRAIL EDGE option to execute the lead edge/trail edge adjustment diagnostic. To run the LEAD EDGE/TRAIL EDGE diagnostic: 1. Press the Menu key. The MAIN M ENU screen is displayed. 2. Press the Next ke[...]

  • Page 133

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 127 1. Press the Menu key. The MAIN MENU screen is displa yed. 2. Press the Next key until DIAGNOSTICS is highlighted. 3. Press the Enter key to select DIAGNOSTICS. The DIAGNOSTICS menu screen is displayed. 4. Press the Next key until SCANNER DIAGNOSTICS is displayed. 5. Press the Enter key to select SCAN[...]

  • Page 134

    128 • Main Menu XEROX WIDE FORMAT COPY SYSTEM A : Left D : Register B : Exit E : Input C : Right c) Observe the Display. The status of the covered optical paper sensor changes from NO to YES if the sensor is okay.. d) Move the sheet of paper fully to the left and right to check the LEFT and RIGHT sensors. 10. To check the status of the thick docu[...]

  • Page 135

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 129 A : Calibration Roll Drive Gear 12. Press the Exit key to return to the COMPONENT TESTS me nu screen. The MOTOR COMMUNICATIONS test is for use by the Customer Service Engineer only. However, user access is permitted in the event that Service instructs the user to perform this test. This test allows th[...]

  • Page 136

    130 • Main Menu XEROX WIDE FORMAT COPY SYSTEM 2. Press the Next key until DIAGNOSTICS is highlighted. 3. Press the Enter key to select DIAGNOSTICS. The DIAGNOSTICS menu screen is dis played. 4. Press the Next key until SCANNER DIAGNOSTICS is displayed. 5. Press the Enter key to select SCANNER DIAGNOSTICS. The SCANNER DIAGNOSTICS menu screen is di[...]

  • Page 137

    XEROX WIDE FORMAT COPY SYSTEM Main Menu • 131 Select the CALIBRATION MOTOR option to set the calibration zone motor. To run the CALIBRATION MOTO R diagnostic: 1. Press the Menu key. The MAIN MENU screen is displayed. 2. Press the Next key until DIAGNOSTICS is highlighted. 3. Press the Enter key to select DIAGNOSTICS. The DIAGNOSTICS menu screen i[...]

  • Page 138

    132 • Main Menu XEROX WIDE FORMAT COPY SYSTEM 17. Press the Exit key to return to the Co mponent Tests menu screen. The READ NVR option allows the examination of the contents of the non - volatile RAM (NVR). The service center may ask you to provide this information when calling for service. To run the READ NVR diagnostic: 1. Press the Me nu key.[...]

  • Page 139

    XEROX WIDE FORMAT COPY SYSTEM Job Accounting • 133 Job Accounting Job Accounting NOTE: The JOB ACCOUNTING feature is included in the WIDE FORMAT COPY SYSTEM 8830, 8850, , 510 Se ries and 721P. It is an optional feature on the WIDE FORMAT COPY SYSTEM 8825 and X2 TECH. If you obtain this feature, the System Administrator can enable it at any time o[...]

  • Page 140

    134 • Job Accounting XEROX WIDE FORMAT COPY SYSTEM • DISABLED jobs do not require an account number. The Scanner and Printer share a common job based a ccounting database referred to as the AccXES Account Management Tool. This AccXES Account Management Tool is composed of two components, an external accounting software package, installed on an [...]

  • Page 141

    XEROX WIDE FORMAT COPY SYSTEM Job Accounting • 135 If Job Accounting is ENABLED, the following screen is displayed: PLEASE ENTER USER: Note: If Job Accounting Mode is enabled as OPTIONAL the phrase OR PRESS ENTER will display at the bottom of the screen. No USER ID is required, press Enter to continue You must enter the User ID code assigned to y[...]

  • Page 142

    136 • Job Accounting XEROX WIDE FORMAT COPY SYSTEM ERROR: INVALID USER OR ACCOUNT When Job Accounting Mode is enabled the system examines the in coming job for a valid account number. If none is found, the job is rejected, and an error page is printed. NOTE: The 8825/8830 print drivers and AccXES Client Tools (ACTS) software all have a feature th[...]

  • Page 143

    XEROX WIDE FORMAT COPY SYSTEM Cleaning and maintenance - Scanner • 137 Cleaning and maintenance - Scanner Cleaning and maintenance - Scanner For the Scanner to do its best job, the Platen Glass, Document Drive Rolls, Backer Roll, Calibration Strip, and Document Feed Tra y must be kept clean. This requires some daily and monthly cleaning and maint[...]

  • Page 144

    138 • Cleaning and maintenance - Scan ner XEROX WIDE FORMAT COPY SYSTEM A : Platen Glass D : Document Drive Rolls (front) B : Backer Roll E : Document Feed T ray C : Document Drive Rolls (rear) Cleaning the Platen Glass and Document Drive Rolls Perform the following steps daily: 1. Open the Top Cover. 2. Dampen a clean, lint - free towel (600S437[...]

  • Page 145

    XEROX WIDE FORMAT COPY SYSTEM Cleaning and maintenance - Scanner • 139 Cleaning the Calibration Strip Perform the following steps monthly: 1. Press the Menu key, then scroll to the Diagnostic and press the Enter key. Scroll to CLEAN CAL ZONE and press the Enter key. Press the Ent er key to select CLEANING POSITION. NOTE: The Top Cover must be clo[...]

  • Page 146

    140 • Problem solving XEROX WIDE FORMAT COPY SYSTEM Problem solving Problem solving This section contains a problem - solving table and an error message table for help in resolving problems with the WIDE FORMAT SCAN SYSTEM. Identify the problem you are experiencing and follow the step(s) indicated in t he table for fixing the problem. If the proc[...]

  • Page 147

    XEROX WIDE FORMAT COPY SYSTEM Problem solving • 141 this change can be made from the Web PMT only. Refer to the 8825/8830/8850/510 Serie s/721P Controller Setup Manual or the Web Printer Manager Tool User Guide for more information. Constant Scanner NOT READY message Lift the Document Handler Switch off the Scanner Switch off the Printer/Controll[...]

  • Page 148

    142 • Problem solving XEROX WIDE FORMAT COPY SYSTEM scanned. edge first. The Scanner will not accept a thic k document. Ensure that both the Scanner and the Printer are powered up and initialized. Set the Thick Document Lever to its next higher setting. Thick documents may require operator assistance. The Scanner measures the width of the origina[...]

  • Page 149

    XEROX WIDE FORMAT COPY SYSTEM Problem solving • 143 The image density on the copy varies from light to dark. Rotate the original 90 degrees. Adjust the Copy setting for best image quality. Cop ies made in Photo mode have geometric patterns. Set the Original , Type to Normal and the Background Suppression to Off. Set Original , Type to Line and Ba[...]

  • Page 150

    144 • Problem solving XEROX WIDE FORMAT COPY SYSTEM CONTROLLER FAULT - 50000007 A software problem was encountered in controlling the Scanner. Power off and power on the System. See the "Powering off the System" and "Powering on the System" sections for more information. CONTROLLER FAULT - 50000008 - DOCUMENT JAM A document ja[...]

  • Page 151

    XEROX WIDE FORMAT COPY SYSTEM Specifications • 145 Specifications Specifications Speed 8825 8830 8850 510 Series 721P 2 inches per second standard 4 inches per second optional standard standard standard standard 1 inch per second color optio nal optional optional optional optional 7.33 inches per second* standard * Requires Turbo III Feature Key,[...]

  • Page 152

    146 • Specifications XEROX WIDE FORMAT COPY SYSTEM Maximum Elevatio n : 0 - 6560 feet 0 - 1.995 km Heat Emission Running: 690 BTU/hr Power Consumption Standby: 130 W Running: 200 W Electrical Requirements Voltage (AC): 100 - 120 VAC 200 - 240 VAC Current: 4 amps 3 amps Frequency : 50/60 Hz Audible Noise Standby: 33.7 dBA Running: 52.1 dBA Impulse[...]

  • Page 153

    XEROX WIDE FORMAT COPY SYSTEM Appendices • 147 Appendices Appendix 1 Table 9 below shows the minimum and maximum scanning speeds for a 36 inch (914 mm) wide document in Line, Mixed, and Photo modes at various resolutions. NOTE: Speeds are given in inches per second (IPS) and centimeters per second (cm/s). NOTE: Thick documents are scanned at a ma[...]

  • Page 154

    148 • Appendices XEROX WIDE FORMAT COPY SYSTEM Appendix 2 Paper sizes supported by the 8825, 8830, 8850 510 Series, and 721P Printers an d the Controller with Firmware 9.1 or higher are shown in Table 10. The X2 TECH Color Printer is available in two configurations, capable of printing on media up to 36" wide, or on media up to 54" wide[...]

  • Page 155

    XEROX WIDE FORMAT COPY SYSTEM Appendices • 149 Appendix 3 Table 11 below shows roll sizes supported by the 8825, 8830, 8850,510 Series and 721P Printers. Table 11. Printer roll sizes Roll size Width 8825/8830/885 0 /510dp Series /721P ISO Roll A0 841 mm X X ISO Roll A1 594 mm X X ISO Roll A2 420 mm X X ISO Roll A3 297 mm X X ISO Roll A0 880 mm X [...]

  • Page 156

    150 • Appendices XEROX WIDE FORMAT COPY SYSTEM • Test Print Stick Font • HP2 Stick Font Latin • CalComp Stick Font • CalComp Stick Font - Proportional • VG - CalComp • VG - CalComp - Proportional • VG - Hershey - BoldItalic - Proportional • VG - Hershey - Italic - Proportional • VG - Hershey - SanSerif - Proportional • VG - He[...]

  • Page 157

    XEROX WIDE FORMAT COPY SYSTEM Appendices • 151 Appendix 5 File formats supported by the Controller with Firmw are 10.0 are shown in the list below. • CalComp 906/907/PCI • HP - GL (HP7585/6) • HP - GL/2 • TIFF 6.0 • CGM • VCGL • VDS (VRF, Block Raster, Compressed Raster, VOF) • Versatec Raster/Green Sheet • Post Script Appendix [...]

  • Page 158

    152 • Appendices XEROX WIDE FORMAT COPY SYSTEM Appendix 7 Appendix 7 shows the structure of the Main Menu. The menu tree below shows the top level of the Main Menu. The pages that follow contain menu trees for each of the four top - level options. Main Menu Configuration System Administration System Information Diagnostics The menu tree below sho[...]

  • Page 159

    XEROX WIDE FORMAT COPY SYSTEM Appendices • 153 The menu tree below shows the structure of the System Information option of the Main Menu. System Information System Description Configuration Prints Recent Fault List Scanner Controller Control Panel Printer Finisher Copier Configuration Printer Configuration Printer Settings Configuration Prints Th[...]

  • Page 160

    [...]

  • Page 161

    [...]

  • Page 162

    Prepared by: Xerox Corporation Global Knowledge & Language Services 800 Phillips Road Building 845 - 17S Webster, New York 14580 - 9791 USA Printed in the United States of America AccXES is a trademark of the Xerox Corporation 2003, 2004. All other product names mentioned herein are trademarks of their respective companies. All rights reserved.[...]