RAD Data comm IPmux-11 manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148

Aller à la page of

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation RAD Data comm IPmux-11. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel RAD Data comm IPmux-11 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation RAD Data comm IPmux-11 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation RAD Data comm IPmux-11 devrait contenir:
- informations sur les caractéristiques techniques du dispositif RAD Data comm IPmux-11
- nom du fabricant et année de fabrication RAD Data comm IPmux-11
- instructions d'utilisation, de réglage et d’entretien de l'équipement RAD Data comm IPmux-11
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage RAD Data comm IPmux-11 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles RAD Data comm IPmux-11 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service RAD Data comm en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées RAD Data comm IPmux-11, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif RAD Data comm IPmux-11, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation RAD Data comm IPmux-11. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    Installation and Operation Manual IPmux-11 TDM Pseudowire Access Gateway Version 2.00[...]

  • Page 2

    [...]

  • Page 3

    IPmux-11 TDM Pseudowire Access Gateway Version 2.00 Installation and Operation Manual Notice T h i s m a n u a l c o n t a i n s i n f o r m a t i o n t h a t i s p r o p r i e t a r y t o R A D D a t a C o m m u n i c a t i o n s L t d . ( " R A D " ) . N o part of this publication may be reproduced in any form whatsoever without prior w[...]

  • Page 4

    Limited Warranty RAD warrants to DISTRIBUTOR that the hardware in the I Pmux -11 to be delivered hereunder shall be free of defects in material and workmans hip under no rmal use and service for a period of twelve (12) months following the date of shipment to DISTRIBUTOR. If, during the warranty period, any component part of the equipment becomes d[...]

  • Page 5

    Product Disposal To facilitate the reuse, recycling and ot her forms of recovery of waste equipment in protecting the environm ent, the owner of this RAD product is required to refrain from disposing of this pr oduct as unsorted municipal waste at the end of its life cycle. Upon termination of the unit’s use, customers should provide for its coll[...]

  • Page 6

    In some cases, the users may insert their own SFP la ser transceivers into the product. Users are alerted that RAD cannot be held responsible for any damage th at may result if non-compliant transceivers are used. In particular, users are warned to use only age ncy approved pro ducts that comply with the local laser safety regulations fo r Class 1 [...]

  • Page 7

    The maximum permissible current capability of the branch distribution circuit that supplies power to th e product is 16A. The circuit breaker in the building installatio n should have high breaki ng capacity and m ust operate at short-circuit current exceeding 35A. Before connecting the DC su pply wires, ensure that power i s removed from the DC ci[...]

  • Page 8

    Some SELV and non-SELV circuits use the same connectors. Use caution when connecting cables. Extra caution should be exer cise d during thunderstorms. When using shielded or coaxial cables, verify that there is a good ground connection at both ends. The earthing and bonding of the ground connectio ns should comply with the local codes. The telecomm[...]

  • Page 9

    FCC-15 User Information This equipment has been tested and found to comply with the limits of the Class A digital device, pursuant to Part 15 of the FCC rules. These limi ts are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can ra[...]

  • Page 10

    Declaration of Conformity Manufacturer's Name: RAD Data Communications Ltd. Manufacturer's Address: 24 Raoul Wallenberg St. Tel Aviv 69719 Israel declares that the product: Product Name: IPmux-11 conforms to the following standard(s ) or other normative document(s): EMC : EN 55022: 1998 Information techno logy equipment – Radio disturba[...]

  • Page 11

    IPmux-11 Ver. 2.00 Configuring IPmux-11 1 Quick Start Guide Installation of IPmux-11 should be carrie d out only by an experienced technician. If you are familiar with IPmux-11, use this guide to prepare the unit for operation. 1. Installing IPmux-11 Connecting the Interfaces 1. Connect the network to the RJ-45 connector designated ETH 1. 2. Connec[...]

  • Page 12

    Quick Start Guide Installation and Operation Manual 2 Configuring IPmux-11 IPmux-11 Ver. 2.00 Configuring the IP Management Parameters The host IP address, subnet mask and default gateway IP address must be configured via an ASCII terminal.  To configure the IP management parameters: • From the Host IP menu ( Main > Configuration > Syste[...]

  • Page 13

    IPmux-11 Ver. 2.00 i Contents Chapter 1. Introduction 1.1 Overview ..................................................................................................................... 1-1 Versio ns ....................................................................................................................... ......... 1-1 Applicat ion ....[...]

  • Page 14

    Table of Contents Installation an d Operation M anual ii IPmux-11 Ver. 2.00 Chapter 4. Configuration 4.1 Configuration Sequence .............................................................................................. 4-1 4.2 Configuring IPmux-11 for Management ....................................................................... 4-2 Configu[...]

  • Page 15

    IPmux-11 Ver. 2.00 Overview 1-1 Chapter 1 Introduction 1.1 Overview IPmux-11 offers a solution for extendin g tradit ional E1/T1 transparently over packet switched networks (PSNs) such as IP, Ethernet, and MPLS networks. The device converts the data stream coming from its TDM ports into configura ble-sized packets that are extended over the Fast Et[...]

  • Page 16

    Chapter 1 Introduction Installation and Operation Manual 1-2 Overview IPmux-11 Ver. 2.00 Application Figure 1-1 ill ustrates a typical IPmux-11 multiplexing voice and Ethernet traffic over an IP link. Figure 1-1. Multiplexing Voice and Et hernet over a Packet-Switched Network Features E1 Interface The E1 port complies with G.703, G.7 04, and G.823 [...]

  • Page 17

    Installation and Operation Manual Chapter 1 Introduction IPmux-11 Ver. 2.00 Overview 1-3 IP The data stream coming from the E1 or T1 port is converted into IP packets that are transported over the Fast Ethernet ports, and vice versa. TDM bytes are encapsulated in a UDP frame that runs over IP an d over Ethernet. The number of TDM bytes in an IP fra[...]

  • Page 18

    Chapter 1 Introduction Installation and Operation Manual 1-4 Overview IPmux-11 Ver. 2.00 QoS QoS supports: • Labeling IP level priority (ToS/Diffserv) for TDMoIP packets • VLAN tagging and priority labeling according to IEEE 802.1p&Q for TD MoIP packets • QoS marking of the TDMoIP traffic in MPLS networks. The user can configure the ToS ([...]

  • Page 19

    Installation and Operation Manual Chapter 1 Introduction IPmux-11 Ver. 2.00 Functional Description 1-5 1.2 Physical Description IPmux-11 is a compact easy-to-install standalone unit. Figure 1-2 shows a 3-dimens ional view of IPmu x-11. Figure 1-2. IPmux-11 3D View The front panel includes the IPmux-11 LEDs . For the detailed LED description, see Ch[...]

  • Page 20

    Chapter 1 Introduction Installation and Operation Manual 1-6 Functional Description IPmux-11 Ver. 2.00 Unframed In the unframed mode, the incoming bit st ream from each channel (regardless of framing) is converted into IP over Eth e rnet frames. This option provides clear channel end-to-end se rvice (unframed). Fractional In the fractional mode, th[...]

  • Page 21

    Installation and Operation Manual Chapter 1 Introduction IPmux-11 Ver. 2.00 Functional Description 1-7 • Internal timing – in this mode, the Tx clock is derived from an internal oscillator. • External timing – in this mode the Tx clock is derived from the external clock input. The external clock port also outputs the input clock signal to a[...]

  • Page 22

    Chapter 1 Introduction Installation and Operation Manual 1-8 Functional Description IPmux-11 Ver. 2.00 Figure 1-4. IPmux-11 in Ex ternal Clock Mode Single Source Clock Network When a common clock is not available on all the ends of the network, one of the IPmux-11 devices is configured to work in loopback timing, while the other IPmux-11device is c[...]

  • Page 23

    Installation and Operation Manual Chapter 1 Introduction IPmux-11 Ver. 2.00 Functional Description 1-9 Table 1-2. TDMoIP Frame Structure Field Length (Bytes) Field 7 Preamble 1 SFD 6 Destination MAC Address 6 Source MAC Address 2 Type 1 Vers/HLEN 1 Service Type 2 Total Length 2 Identification 1 Flags/Fragment Offset (most) 1 Fragment Offset (least)[...]

  • Page 24

    Chapter 1 Introduction Installation and Operation Manual 1-10 Functional Description IPmux-11 Ver. 2.00 VLAN Support VLAN, according to IEEE 802.1p& Q, adds four byt es to the MAC layer of the Ethernet frame. The user can set the cont ents of these bytes, MAC layer priority and VLAN ID. In this mode, only VLAN fo rmat frames are sent and receiv[...]

  • Page 25

    Installation and Operation Manual Chapter 1 Introduction IPmux-11 Ver. 2.00 Functional Description 1-11 Table 1-4. TDMoMPLS Frame Structure Field Length (Bytes) Field 7 Preamble 1 SFD 6 Destination MAC Address 6 Source MAC Address 2 Type 20 Outer label 3 EXP 1 Stacking bit 8 TTL 20 Inner label 3 EXP 1 Stacking bit 8 TTL ... Payload 4 CRC Packet Del[...]

  • Page 26

    Chapter 1 Introduction Installation and Operation Manual 1-12 Functional Description IPmux-11 Ver. 2.00 PDVT (Jitter) Buffer IPmux-11 is equipped with a Packet DVT (Delay Variation Tol erance) buffer. The PDVT buffer or jitter buffer is filled by the incoming IP packets and emptied out to fill the TDM stream. The buffer begin s to empty out only a [...]

  • Page 27

    Installation and Operation Manual Chapter 1 Introduction IPmux-11 Ver. 2.00 Functional Description 1-13 Configuring the TDM byt es per frame (TDM bytes/frame) parameter has impact on the Ethernet throughput (bandwidth or traf fic traveling through the Ethernet). This parameter controls the number of TDM bytes enc apsulated in one frame. The TDM byt[...]

  • Page 28

    Chapter 1 Introduction Installation and Operation Manual 1-14 Functional Description IPmux-11 Ver. 2.00 Where: • VLAN is an optional field: if enabled it adds 4 bytes to the frame overhead • payload = number of TDM bytes in frame, (48, 96, 144, 19 2, … 1440) • frame overhead = size of 46 bytes, include MAC, LLC, IP and UDP layer • CAS is [...]

  • Page 29

    Installation and Operation Manual Chapter 1 Introduction IPmux-11 Ver. 2.00 Functional Description 1-15 For V1 the maximum number of frames that can be reordered is 7, even if the calculation result exceeds 7. For V2 th e maximum number of frames that can be reordered is 64, even if t he ca lculation result exceeds 64. Duplicated Frames When frames[...]

  • Page 30

    Chapter 1 Introduction Installation and Operation Manual 1-16 Functional Description IPmux-11 Ver. 2.00 IPmux-11 transfers fault condit ions only if the payload format is configured to V2. The fault conditions are transferre d as follows: • Framed E1 or T1: RDI as RDI, LOS and AIS as AIS • Unframed E1 or T 1: LOS and AIS as AIS. VLAN Traffic Be[...]

  • Page 31

    Installation and Operation Manual Chapter 1 Introduction IPmux-11 Ver. 2.00 Functional Description 1-17 Internal Swi tch TDMo IP E1 o r T1 P ort Et hernet Networ k Port Et hernet User Port 1 Et hernet User Port 2 Figure 1-11. IPmux-11 with Two Ethernet User Port Priority is always given to TDMoIP packets insi de the internal switch. Switch Operatio[...]

  • Page 32

    Chapter 1 Introduction Installation and Operation Manual 1-18 Functional Description IPmux-11 Ver. 2.00 Table 1-7. Automatic Per-Port Rate Limiting Default VLAN Priority Automatic Rate Limiting 4 - 7 64 Mbps 2 - 3 32 Mbps 0 - 1 16 Mbps Table 1-8 illustrates relations between rate limiting and VLAN tagging modes. Table 1-8. Rate Limitin g and VLAN T[...]

  • Page 33

    Installation and Operation Manual Chapter 1 Introduction IPmux-11 Ver. 2.00 Functional Description 1-19 Switch Behavior When Handling User and Network Traffic The way the network and user ports handle the traffic depends on the selected port mode (transparent , untagged, tagged or double tagged) and fra me type (untagged, tagged or double tagged). [...]

  • Page 34

    Chapter 1 Introduction Installation and Operation Manual 1-20 Functional Description IPmux-11 Ver. 2.00 Table 1-12. Mode C Ingress Egress If a tagged frame enters the transparent port, it is switched to the tagged port • If the tagged port is not a member of the frame’s VID, the frame is disc arded • The tagged port is a member of the frame?[...]

  • Page 35

    Installation and Operation Manual Chapter 1 Introduction IPmux-11 Ver. 2.00 Functional Description 1-21 Table 1-14. Mode E Ingress Egress If a tagged frame enters the untagged port, it is switched to the tagged port If the tagged port is not a member of the frame VID, the frame is discarde d If the tagged port is a member of the frame VID, the fram[...]

  • Page 36

    Chapter 1 Introduction Installation and Operation Manual 1-22 Functional Description IPmux-11 Ver. 2.00 Table 1-16. Mode G Ingress Egress If a double-tagged frame enters the transparent port, it is switched to the double-tagged port • If the double-tagged port is not a member of the first VID of the frame, the frame is discarded • If the double[...]

  • Page 37

    Installation and Operation Manual Chapter 1 Introduction IPmux-11 Ver. 2.00 Functional Description 1-23 Switch Behavior When Hand ling Management Traffic Table 1-17 lists operation modes of the network port when handl ing the management traffic. Table 1-17. Switch Behavior (Management Traffic) Port Option Transparent Untagged Tagged Double-Tagg ed [...]

  • Page 38

    Chapter 1 Introduction Installation and Operation Manual 1-24 Technical Specifications IPmux-11 Ver. 2.00 1.4 Technical Specifications E1 Interface Compliance ITU-T Rec. G.703, G.704 , G.706, G.732, G.82 3 Data Rate 2.048 Mbps Line Code HDB3 Framing Unframed, framed, multiframe ; with or without CRC-4 Signaling CAS, CCS (transparent) Line Impedance[...]

  • Page 39

    Installation and Operation Manual Chapter 1 Introduction IPmux-11 Ver. 2.00 Technical Specifications 1-25 Timing Transmit • Internal • External input or output via dedicated connector: E1/T1 or 2048/1544 kHz squarewave (RS-485 electrical levels) • Loopback • Adaptive Pseudowire Connections Number of Connections 1 Jitter Buffer Size 3–300 [...]

  • Page 40

    Chapter 1 Introduction Installation and Operation Manual 1-26 Technical Specifications IPmux-11 Ver. 2.00[...]

  • Page 41

    IPmux-11 Ver. 2.00 Site Requirements and Prerequisites 2-1 Chapter 2 Installation and Setup 2.1 Introduction This chapter describes installation and se tup procedures for the IPmux-11 unit. After installing the unit, re fer to Chapter 3 for the operating instructions. If a problem is encountered, refer to Chapter 6 for test and diagnostic instructi[...]

  • Page 42

    Chapter 2 Installation and Setup Installation and Operation Manual 2-2 Connecting the Ethernet Equipment IPmux-11 Ver. 2.00 2.3 Package Contents The IPmux-11 package includ es the following items: • One IPmux-11 unit • Power cord • IEC 60320 AC/DC adapter plug • CBL-DB9F-DB9M-STR control po rt cable (if ordered) • CBL-RJ45/2BNC/E1/X a dap[...]

  • Page 43

    Installation and Operation Manual Chapter 2 Installation and Setup IPmux-11 Ver. 2.00 Connecting to the E1/T1 Devices 2-3 Connecting the Ethernet User Equi pment Figure 2-3 illustrates a rear panel of th e IPmux-11 unit with two user LAN ports. CO NTRO L EXT C LK E1 ETH 123 SET DEF Figure 2-3. E TH 2 and ETH 3 Co nnectors  To connect to the Ethe[...]

  • Page 44

    Chapter 2 Installation and Setup Installation and Operation Manual 2-4 Connecting IPmux-11 to Power IPmux-11 Ver. 2.00 2.6 Connecting to the External Clock Source IPmux-11 is connected to the external clock source via a balance d RJ-45 connector designated EXT CLK. Re fer to Appendix A for the connector pinout. CO NTRO L EXT C LK E1 ETH 123 SET DEF[...]

  • Page 45

    Installation and Operation Manual Chapter 2 Installation and Setup IPmux-11 Ver. 2.00 Connecting IPmux-11 to Power 2-5 Before connecting or disconnecting any cable, t he protective earth terminals of this unit must be connected to the protective ground conductor of the mains (AC or DC) power cord. If you are u sing an extension cord (power cabl e) [...]

  • Page 46

    Chapter 2 Installation and Setup Installation and Operation Manual 2-6 Connecting IPmux-11 to Power IPmux-11 Ver. 2.00[...]

  • Page 47

    IPmux-11 Ver. 2.00 Controls and Indicators 3-1 Chapter 3 Operation This chapter: • Provides a detailed description of the front panel c ontrols and indicators a nd their functions • Explains power-on and po wer-off procedures • Provides instructions for config uration using a termi nal connected to the IPmux-11 control port • Provides instr[...]

  • Page 48

    Chapter 3 Operation Installation and Operation Manual 3-2 Controls and Indicators IPmux-11 Ver. 2.00 Table 3-1. IPmux-11 LED s and Controls Name Type Function Location PWR Green LED ON – Power is ON Front panel ALM Red/yellow LED ON (red) – Active alarm is stored in the log file ON (yellow) – An alarm is present in the log file OFF – No ala[...]

  • Page 49

    Installation and Operation Manual Chapter 3 Operation IPmux-11 Ver. 2.00 Default Settings 3-3 3.3 Default Settings The following table lists the default settings of the IPmux-11 co nfiguration parameters. Table 3-2. Default Settings Parameter Default Value System IP address Empty IP mask Empty Default gateway 0.0.0.0 DHCP status Enable Authenticati[...]

  • Page 50

    Chapter 3 Operation Installation and Operation Manual 3-4 Default Settings IPmux-11 Ver. 2.00 Table 3-2. Default Settings (Cont.) Parameter Default Value Fall back clock source Port1 Master clock Ex ternal Fall back clock Internal Physical Layer (T DM, E1) Admin status Enable Transmit clock source Adaptive Loopback state Disable Rx sensitivity Shor[...]

  • Page 51

    Installation and Operation Manual Chapter 3 Operation IPmux-11 Ver. 2.00 Default Settings 3-5 Table 3-2. Default Settings (Cont.) Parameter Default Value Trail mode Termination Physical Layer (ETH) Channel state Enable Auto negotiation • Disable for fiber optic interf ace • Enable for copper interface Max capability advertised 100baseT full dup[...]

  • Page 52

    Chapter 3 Operation Installation and Operation Manual 3-6 Configuration Alternatives IPmux-11 Ver. 2.00 3.4 Configuration Alternatives If required, IPmux-11 can be reconfig ured. The IPmux-11 configuration and monitoring operations are performed using any of th e following tools: • ASCII terminal connected to supervisory port • ConfiguRAD, a We[...]

  • Page 53

    Installation and Operation Manual Chapter 3 Operation IPmux-11 Ver. 2.00 Configuration Alternatives 3-7  To enter as a user: 1. Enter user for u ser name. 2. Enter 1234 for pass word. If the password is invalid in three consecutive attempts, the system becomes inaccessible for 15 minutes.  How to use the terminal to perform a desired activity[...]

  • Page 54

    Chapter 3 Operation Installation and Operation Manual 3-8 Configuration Alternatives IPmux-11 Ver. 2.00  Type the line number corr esponding to the desired value, and then press <Enter>  To enter a value which requires free text entry, type in the desired string and then press <Enter> . Use backspace to erase the current string. N[...]

  • Page 55

    Installation and Operation Manual Chapter 3 Operation IPmux-11 Ver. 2.00 Configuration Alternatives 3-9 General Web Browsers Operating Procedures  To manage IPmux-11 via Web browser: 1. Open the Web browser. 2. Enter the IP address of IPmux-11 in the address field of the browser in the following format: http://’IP address’ ( ‘IP address’[...]

  • Page 56

    Chapter 3 Operation Installation and Operation Manual 3-10 Configuration Alternatives IPmux-11 Ver. 2.00 Overview of Menu Operations Use these menu trees as a reference ai d while performing configuration and control functions. Chapter 4 illustrates menus an d explains parameters. Host IP Manage ment User Access 1. Devi ce inf o 2. Authentication/c[...]

  • Page 57

    Installation and Operation Manual Chapter 3 Operation IPmux-11 Ver. 2.00 Configuration Alternatives 3-11 Configuration Connection Bundle Connecti on 1. System 2. Physical layer 3. Connection 4. Bridge 1. Bundle ID 2. DS0 bundle 3. Bundle connection 1. Destination IP address 2. Next hop 3. IP TOS 4. Connection status 5. Destination bundle 6. TDM byt[...]

  • Page 58

    Chapter 3 Operation Installation and Operation Manual 3-12 Turning IPmux-11 Off IPmux-11 Ver. 2.00 Diagnostics Ping Loopback Self Test Results 1. Pin g 2. Trace route 3. Loopback 4. Self test resu lts 1. Destinati on IP address 2. VLAN tagging 3. 5. Number of frames to send 6. Pin g sen d VLA N ID 4. VLA N prio rity 1. Loopb ack state 1. Framer tes[...]

  • Page 59

    IPmux-11 Ver. 2.00 Configuration Sequence 4-1 Chapter 4 Configuration This chapter illustrates the IPmux-11 c onfiguration screens an d explains their parameters. Menu trees of the IPmux-11 management software are shown in Chapter 3 . 4.1 Configuration Sequence There are four basic configurat ion steps that need to be followed when depl oying any I[...]

  • Page 60

    Chapter 4 Configuration Installation and Operation Manual 4-2 Configuring IPmux-11 for Management IPmux-11 Ver. 2.00 4.2 Configuring IPmux-11 for Management The IPmux-11 management software allows yo u to perform the following: • Defining IP parameters of the IPmux-11 host • Configuring management access • Configuring control port parameters [...]

  • Page 61

    Installation and Operation Manual Chapter 4 Configuration IPmux-11 Ver. 2.00 Configuring IPmux-11 for Management 4-3  To enable DHCP client : 1. From the System menu, select Host IP . The Host IP menu appears (see Figure 4-2 ). 2. Fr om the Host IP menu , select DHCP , and choose Enabl e . IPmux-11 starts broadcasting requests for an IP address.[...]

  • Page 62

    Chapter 4 Configuration Installation and Operation Manual 4-4 Configuring IPmux-11 for Management IPmux-11 Ver. 2.00  To acquire a new IP address from the DHCP server: 1. From the Host IP menu, set all host IP parameters (host IP, IP mask and default gateway) to 0.0.0. 0. 2. Enable the DHCP client. IPmux-11 reboots itself automatically and acqui[...]

  • Page 63

    Installation and Operation Manual Chapter 4 Configuration IPmux-11 Ver. 2.00 Configuring IPmux-11 for Management 4-5  To define read, write and trap communities: 1. From the Management menu, select Authentication/community . The Authentication/Communi ty menu appears (see Figure 4-4 ). 2. From the Authentication/Com munity menu, do th e followin[...]

  • Page 64

    Chapter 4 Configuration Installation and Operation Manual 4-6 Configuring IPmux-11 for Management IPmux-11 Ver. 2.00 It is possible to set up a local or re mote management link using the manager location and VLAN configuration. Refer to the configuration example at the end of this section.  Network-Eth1 – The network manager accesses IPmux-11 [...]

  • Page 65

    Installation and Operation Manual Chapter 4 Configuration IPmux-11 Ver. 2.00 Configuring IPmux-11 for Management 4-7 Configuration Example Local Management Figure 4-6 illustrates how to manage a local IPmux-11 from an NMS connected via Ethernet user port 2. • VLAN tagging mode of the Ethernet user ports is configured to Double Tag • User and ma[...]

  • Page 66

    Chapter 4 Configuration Installation and Operation Manual 4-8 Configuring IPmux-11 for Management IPmux-11 Ver. 2.00 User 2 User 2 Network Netwo rk Management Tr affic (VLA N 1) User Traffic (VLAN 100) User Traffic (VLA N 10 0) VLAN 1 VL AN 1 VLA N 10 0 VLA N 10 0 User 1 User 1 Network Manag emen t Station Local IPmux-11 Remot e IPmux-11 User Equip[...]

  • Page 67

    Installation and Operation Manual Chapter 4 Configuration IPmux-11 Ver. 2.00 Configuring IPmux-11 for Management 4-9  Select Access , and specify the user’s access methods (ASCII ter minal, Telnet, Web browser, Telnet and Web browser, or all of them).  Select 'su' password , and enter your current superuser pa ssword.  Select N[...]

  • Page 68

    Chapter 4 Configuration Installation and Operation Manual 4-10 Configuring IPmux-11 for Management IPmux-11 Ver. 2.00  Enable (Telnet, SNMP or Web access is enabled)  Disable (Telnet, SNMP or Web access is disabled)  Manager Only (Access is allowed only for the statio ns appearing in the manager list). Table 4-1. Management A ccess Impleme[...]

  • Page 69

    Installation and Operation Manual Chapter 4 Configuration IPmux-11 Ver. 2.00 Configuring IPmux-11 for Operation 4-11  To select the baud rate: 1. From the System menu ( Figure 4-1 ), select Control port . The Control Port menu is displayed (se e Figure 4-11 ). 2. From the Control Port menu, select Baud rate , and configure baud rate of th e IPmu[...]

  • Page 70

    Chapter 4 Configuration Installation and Operation Manual 4-12 Configuring IPmux-11 for Operation IPmux-11 Ver. 2.00  Channel 4  External  Fall back clock (Fall back clock type):  Internal  Adaptive  Rx clock  None  Fall back source (Fall back clock source):  Channel 1  Channel 2  Channel 3  Channel 4  Externa[...]

  • Page 71

    Installation and Operation Manual Chapter 4 Configuration IPmux-11 Ver. 2.00 Configuring IPmux-11 for Operation 4-13 Configuring IPmux-11 at the Physical Level The TDM (E1 or T1) and Ethernet interfaces of IPmux-11 must be configured at the physical level. Configuration>Physical layer 1. TDM > 2. Eth > 3. External clock interface (Balance)[...]

  • Page 72

    Chapter 4 Configuration Installation and Operation Manual 4-14 Configuring IPmux-11 for Operation IPmux-11 Ver. 2.00  Rx sensitivity (Maximum attenuatio n of the receive signal that can be compensated for by the interface receive path):  Short haul (-10 dB)  Long haul (-32 dB)  Trail Mode (Enables the end-to-end transfer of TDM OA M (Op[...]

  • Page 73

    Installation and Operation Manual Chapter 4 Configuration IPmux-11 Ver. 2.00 Configuring IPmux-11 for Operation 4-15 Configuration>Physical layer>TDM (E1) Channel ID (1) Restoration time >(CCITT) Signaling mode (CAS Disabled) 1. Admin status (Enable) 2. Transmit clock source >(Adaptive) 3. Rx sensitivity (Short haul) 4. Trail mode (Term[...]

  • Page 74

    Chapter 4 Configuration Installation and Operation Manual 4-16 Configuring IPmux-11 for Operation IPmux-11 Ver. 2.00  To configure T1 interface: • From the TDM (T1) men u, configure the following:  Admin Status:  Enable (T1 link is enabled)  Disable (T1 link is disabled)  Transmit clock source:  Adaptive (Adaptive clock regenera[...]

  • Page 75

    Installation and Operation Manual Chapter 4 Configuration IPmux-11 Ver. 2.00 Configuring IPmux-11 for Operation 4-17  Line buildOut (CSU mo de only, Tx gain level relative to T1 output tran smit level)  0 dB (No attenuation)  7.5 dB (Attenuation of 7.5 dB relati ve to the nominal transmit level)  15 dB (Attenuation of 15 dB relati ve to[...]

  • Page 76

    Chapter 4 Configuration Installation and Operation Manual 4-18 Configuring IPmux-11 for Operation IPmux-11 Ver. 2.00 Configuration>Physical layer>TDM (T1) Channel ID (1) 1. Admin status (Enable) 2. Transmit clock source >(Adaptive) 3. Rx sensitivity (Short haul) 4. Trail mode (Termination) 5. Line type >(ESF) 6. Line code >(B8ZS) 7. [...]

  • Page 77

    Installation and Operation Manual Chapter 4 Configuration IPmux-11 Ver. 2.00 Configuring IPmux-11 for Operation 4-19 3. When the required Ethernet interfac e is displayed, configure the following:  Channel state:  Enable (Current Ethernet interface is enabled)  Disable (Current Ethernet interface is disabled)  Auto negotiation:  Enab[...]

  • Page 78

    Chapter 4 Configuration Installation and Operation Manual 4-20 Configuring IPmux-11 for Operation IPmux-11 Ver. 2.00 Configuring Bund le Connections IPmux-11 supports one bundle that can includ e up to 31 E1 or up to 24 T1 timeslots. The bundle can be connected to any bundle of the TDMo IP device that operates opposite IPmux-11. Currently, TDMo IP [...]

  • Page 79

    Installation and Operation Manual Chapter 4 Configuration IPmux-11 Ver. 2.00 Configuring IPmux-11 for Operation 4-21  Destination bundle (bundl e number in the destin ation device): 1–8063  Next hop address (Use the next hop parameter when the destination address is not in the devic e subnet. In such cases the Ethernet frame is sent to the [...]

  • Page 80

    Chapter 4 Configuration Installation and Operation Manual 4-22 Configuring IPmux-11 for Operation IPmux-11 Ver. 2.00  Sensitive (Whether to optimize the cl ock for acc urateness or for constant delay):  Data (Accurate clock is more important than constant delay.  Delay (Constant delay is more important than accurate clock.  VLAN Tagging[...]

  • Page 81

    Installation and Operation Manual Chapter 4 Configuration IPmux-11 Ver. 2.00 Configuring IPmux-11 for Operation 4-23 Configuration>Connection>DS0 bundle +1 +2 +3 +4 +5 +6 +7 +8 +9 +10 TS 0 1 0 0 0 0 0 0 0 0 0 TS 10 0 0 0 0 0 0 0 0 0 0 TS 20 0 0 0 0 0 0 0 0 0 0 TS 30 0 1. Change cell [0 - 1] ... (0) > Please select item <1 to 1> E - E[...]

  • Page 82

    Chapter 4 Configuration Installation and Operation Manual 4-24 Configuring IPmux-11 for Operation IPmux-11 Ver. 2.00 Configuration>Connection>Bundle connection TDM channel ID: 1 Bundle ID: 1 1. Destination IP address ... (0.0.0.0) 2. Outbound label tagging (Enable) 3. Outbound tunnel label ... (4) 4. Outbound EXP bits ... 7 5. Inbound label t[...]

  • Page 83

    Installation and Operation Manual Chapter 4 Configuration IPmux-11 Ver. 2.00 Configuring IPmux-11 for Operation 4-25 2. From the Bridge menu, select Aging time and defi ne a period of time in seconds from the moment when a node is disconnected fro m the network segment or becomes inactive and remo val of the node ad dress from the database. 3. Sele[...]

  • Page 84

    Chapter 4 Configuration Installation and Operation Manual 4-26 Configuring IPmux-11 for Operation IPmux-11 Ver. 2.00  Status:  Enable (Adds the current port as a VLAN member)  Disable (Disables VLAN membership of the current port) Configuration>Bridge 1. Aging time [sec] <0-Disable>[0 - 4080] ... (304) 2. Erase MAC table 3. Bridge[...]

  • Page 85

    Installation and Operation Manual Chapter 4 Configuration IPmux-11 Ver. 2.00 Additional Tasks 4-27 4.4 Additional Tasks Displaying the IPmux-11 Inventory The IPmux-11 inventory displays informat ion on c urrent software and hardware revisions of the unit. It als o provides the IPmux-11 interface description.  To display the IPmux-11 inventory: ?[...]

  • Page 86

    Chapter 4 Configuration Installation and Operation Manual 4-28 Additional Tasks IPmux-11 Ver. 2.00 2. From the Date/Time menu, select Set time , and enter the current time in t he hh:mm:ss format. 3. Select Set date , and enter the current date in the yyyy:mm:dd format. Configuration>System>Date/time 1. Set time <HH:MM:SS> ... (09:12:06[...]

  • Page 87

    Installation and Operation Manual Chapter 4 Configuration IPmux-11 Ver. 2.00 Additional Tasks 4-29 Monitoring>Status>Diagnostics loopback Channel ID (1) Loopback state: > (Disable) > ESC-prev.menu; !-main menu; &-exit 1 Mngr/s Figure 4-30. Diagnos tics loopback Screen Displaying the TDM Phys ical Layer Information You can view the s[...]

  • Page 88

    Chapter 4 Configuration Installation and Operation Manual 4-30 Additional Tasks IPmux-11 Ver. 2.00 Monitoring>Status>Eth Physical layer Channel > (Network-Eth1) Mode > (Full Duplex) Rate(Mbps) > (100) Status > (Connected) > F - forward ESC-prev.menu; !-main menu; &-exit 1 Mngr/s Figure 4-32. ETH Physical Layer Screen Displa[...]

  • Page 89

    Installation and Operation Manual Chapter 4 Configuration IPmux-11 Ver. 2.00 Additional Tasks 4-31  Sequence errors – total number of sequence errors o ccurred on the bundle  Jitter buffer underflows – total number of jitter buffe r underflows occurred on the bundle  Jitter buffer overflows – to tal number of jitter buffer overflows [...]

  • Page 90

    Chapter 4 Configuration Installation and Operation Manual 4-32 Additional Tasks IPmux-11 Ver. 2.00 2. From the File Utilities , se lect Download/Upload using TFTP . 3. From the Download/Upload using TF TP menu, configure the following:  File name (Name of the file that you int end to transfer)  Command (Operation type)  No operation  So[...]

  • Page 91

    Installation and Operation Manual Chapter 4 Configuration IPmux-11 Ver. 2.00 Additional Tasks 4-33 Resetting IPmux-11 to the Defaults You can reset IPmux-11 t o its default setting s. The reset to the defaults does not affect the master clock setting. In additi on, you can reset local IPmux-11 without affecting its management para meters (IP addres[...]

  • Page 92

    Chapter 4 Configuration Installation and Operation Manual 4-34 Additional Tasks IPmux-11 Ver. 2.00[...]

  • Page 93

    IPmux-11 Ver. 2.00 Overview 5-1 Chapter 5 Configuring IPmux-11 for a Typical Application This chapter provides detailed instr uctions for setting up a typic al application using two IPmux-11 units. 5.1 Overview Application The section provides detailed instr uctions for configuring t wo IPmux-11 unit s operating opposite each other (see Figure 5-1 [...]

  • Page 94

    Chapter 5 Configuring IPmux -11 for a Typical Application Installation and Op eration Manual 5-2 Configuring IPmux-11 Units IPmux-11 Ver. 2.00 Table 5-1. Configuration Summary Device E1 Parameters IP Parameters Bundle Parameters Bundle Connection IPmux-11 (A) • Transmit clock source: adaptive • Line type: Framed G.704 CRC-4 enable d • CAS: di[...]

  • Page 95

    Installation and Operation Manual Chapter 5 Co nfiguring IPmux-11 for a Typical Application IPmux-11 Ver. 2.00 Configuring IPmux-11 Units 5-3  To configure the manager list: 1. Display the Manager List menu ( Configuration > System > Management > Manager list ), and enter IP parameters fo r the network manager station:  NMS IP addres[...]

  • Page 96

    Chapter 5 Configuring IPmux -11 for a Typical Application Installation and Op eration Manual 5-4 Configuring IPmux-11 Units IPmux-11 Ver. 2.00 Configuring Bund les  To assign timeslots to a bundle: 1. Display the Connection menu ( Configuration > Connection ), and assign a number 1 to a bundle. 2. Display the DS0 Bundle Configuratio n menu ( [...]

  • Page 97

    Installation and Operation Manual Chapter 5 Co nfiguring IPmux-11 for a Typical Application IPmux-11 Ver. 2.00 Configuring IPmux-11 Units 5-5 Configuration>Connection>Bundle connection 1. Destination IP address ... (192.168.10.1) 2. Next hop ... (0.0.0.0) 3. IP TOS ... (0) 4. Connection status (Enable) 5. Destination bundle [1 - 496] ... (1) [...]

  • Page 98

    Chapter 5 Configuring IPmux -11 for a Typical Application Installation and Op eration Manual 5-6 Configuring IPmux-11 Units IPmux-11 Ver. 2.00[...]

  • Page 99

    IPmux-11 Ver. 2.00 Monitoring Performance 6-1 Chapter 6 Troubleshooting and Diagnostics This chapter describes how to: • Monitor performance • Detect errors • Handle alarms • Troubleshoot problems • Perform diagnostic tests. 6.1 Monitoring Performance IPmux-11 provides powerful performance monitoring tools, which consist of the following [...]

  • Page 100

    Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual 6-2 Monitoring Performance IPmux-11 Ver. 2.00  To view the E1/T1 statistics: 1. From the Monitoring menu ( Figure 6-6 ), select Statistics . The Statistics menu appears. 2. From the Statistics menu, select Physical Layer . The Physical Layer (E1) or Physical Layer (T1) s[...]

  • Page 101

    Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics IPmux-11 Ver. 2.00 Monitoring Performance 6-3 Table 6-1. E1/T1 Statistic s Alarm Description LOS Number of seco nds with Loss of Signal . A Loss of Signal indicates that there is either no signal arriving from the adjacent E1/T1 device or no valid E1 volt age mask or no vol[...]

  • Page 102

    Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual 6-4 Monitoring Performance IPmux-11 Ver. 2.00 Table 6-1. E1/T1 Statistic s (Cont.) RAI (Yellow) Number of seconds with Remote Alarm Indica tors . A Remote Alarm Indicator is sent by a devi ce when it enters RED state (loses sync). RAI Alarm indicates that the adjacent E 1/T[...]

  • Page 103

    Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics IPmux-11 Ver. 2.00 Monitoring Performance 6-5 Table 6-1. E1/T1 Statistic s (Cont.) Alarm Description ES An Errored Second is a second containing one or more of the following: • CRC error • SEF (OOF) • AIS (T1 only) • If SES is active ES runs for 10 seconds and then [...]

  • Page 104

    Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual 6-6 Monitoring Performance IPmux-11 Ver. 2.00 Monitoring>Statistics>Bridge Channel > (User1-Eth2) Frames Received Frames Transmitted Total Frames: (0) Correct Frames: (0) Total Octets: (0) Correct Octets: (0) Oversize Frames (0) Collisions: (0) Fragments: (0) Jabbe[...]

  • Page 105

    Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics IPmux-11 Ver. 2.00 Monitoring Performance 6-7 Displaying Bundle Connection Statistics The Connection screen provides infor mation about the integrity of the TDMoIP connection, including the jitter buffer statistics. (Each bundle has it own independent jitter buffer ).  T[...]

  • Page 106

    Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual 6-8 Monitoring Performance IPmux-11 Ver. 2.00 Table 6-2. Bundle Con nection Parameters Parameter Description Sequence Errors The number of seconds with at least one seque nce error since the last clear. Each packet transmitted by IPmux-11 holds a sequ ence number. The recei[...]

  • Page 107

    Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics IPmux-11 Ver. 2.00 Monitoring Performance 6-9 Table 6-2. Bundle Connection Parame ters (Cont.) Parameter Description Jitter Buffer Underflows The number of seconds with at least one jitter buffer underflow event since the last clear. IPmux-11 is equipped with a “Packet De[...]

  • Page 108

    Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual 6-10 Detecting Errors IPmux-11 Ver. 2.00 Table 6-2. Bundle Connection Parame ters (Cont.) Parameter Description Jitter Buffer Overflows The number of seconds with at least one jitter buffer overflow ev ent since the last clear. Explanation: In steady state, the jitter buffe[...]

  • Page 109

    Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics IPmux-11 Ver. 2.00 Detecting Errors 6-11 Diagnostics 1. Ping > 2. Loopback > 3. Trace route > 4. Self Test Results > > Please select item <1 to 4> ESC-prev.menu; !-main menu; &-exit 1 Mngr/s Figure 6-4. Diagnostics Menu Diagnostics>Self Test Resu[...]

  • Page 110

    Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual 6-12 Detecting Errors IPmux-11 Ver. 2.00 Monitoring 1. Statistics > 2. Status > 3. Event Log > > Please select item <1 to 3> ESC-prev.menu; !-main menu; &-exit 1 Mngr/s Figure 6-6. Monitoring Menu Monitoring>Event log 1. Read log file [] 2. Clear lo[...]

  • Page 111

    Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics IPmux-11 Ver. 2.00 Detecting Errors 6-13 Table 6-3. Event List Event Description Corrective Action COLD START IPmux-11 has been powered up None CON LOCAL FAIL Ethernet frames are not received by the local IPmux-11 on the specified connection Check Eth/IP path CON REMOTE FAI[...]

  • Page 112

    Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual 6-14 Detecting Errors IPmux-11 Ver. 2.00 Table 6-3. Event List (Co nt.) Event Description Corrective Action LINE AIS END Line AIS state detected has ended None LINE AIS START IPmux-11 has AIS (alarm indicator signal) state on its E1/T1 port Check for a fault at the PDH ne t[...]

  • Page 113

    Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics IPmux-11 Ver. 2.00 Handling Alarms 6-15 Configuring the Bundle Statistics Collection You can set the interval for the bundle statistics collection, as we ll the statistics threshold.  To configure the bundle statistic collection: • From the Event Log menu ( Figure 6-7 [...]

  • Page 114

    Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual 6-16 Troubleshooting IPmux-11 Ver. 2.00 6.4 Troubleshooting The following table presents the event type s as they appear on the Event Log File and lists the actions required to co rrect the event (alarm) indication. Table 6-4. IPmux-11 Troubleshooting Chart Fault Probable C[...]

  • Page 115

    Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics IPmux-11 Ver. 2.00 Testing IPmux-11 6-17 6.5 Testing IPmux-11 Diagnostic capabilities of IPmux-11 include: • External loopbacks • Inband remote loopbacks for T 1 lines • Internal loopbacks • Pinging IP hosts • Running a trace route. Running Loopbacks Running Exter[...]

  • Page 116

    Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual 6-18 Testing IPmux-11 IPmux-11 Ver. 2.00  To run a loopback: 1. From the Diagnostics menu ( Figure 6-4 ), select Loopback . The Loopback menu is displayed (see Figure 6-12 ). 2. From the Loopback menu, type F to select the E1/T1 link t hat you intend to test. 3. From the[...]

  • Page 117

    Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics IPmux-11 Ver. 2.00 Testing IPmux-11 6-19 Activating T1 Inband Loopbacks T1 physical loopbacks ca n be activated by receiving a loopback activation c ode from TDM equipment connected to t he T1 port. When IPmux-11 receives a loopback activation code, it closes an external lo[...]

  • Page 118

    Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual 6-20 Testing IPmux-11 IPmux-11 Ver. 2.00 • Define loop-up code length (Length of th e code to be sent by the TDM devic e in order to activate a loopback) • Define loop-up code (Co de to be sent by the TDM de vice in order to activate a loopback) • Define loop-down cod[...]

  • Page 119

    Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics IPmux-11 Ver. 2.00 Testing IPmux-11 6-21 Diagnostics>Ping 1. Destination IP address ... (0.0.0.0) 2. VLAN tagging (Enable) 3. VLAN ID[1 - 4095] ... (0) 4. VLAN priority[0 - 7] ... (0) 5. Number of frames to send[1 - 4] ... (1) 6. Ping send > Please select item <1 t[...]

  • Page 120

    Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual 6-22 Frequently Asked Questions IPmux-11 Ver. 2.00 Diagnostics>Trace route 1. Destination IP address ... (0.0.0.0) 2. VLAN tagging (Enable) 3. VLAN ID[1 - 4095] ... (1) 4. VLAN priority tag [0 - 7] ... (0) 5. Trace route send > Please select item <1 to 5> ESC-pr[...]

  • Page 121

    Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics IPmux-11 Ver. 2.00 Frequently Asked Questions 6-23 Framed mode: In case of local failure on t he IPmux, or situation of jitter buffer underflow/overflow, a con ditioning patter n (00 to FF) will be sent towards the near-end TDM device on the timeslots related to that specif[...]

  • Page 122

    Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual 6-24 Frequently Asked Questions IPmux-11 Ver. 2.00 A configuration example: Setting IP precedence of 101 and IP ToS of 1000 will give us the byte 10110000, which means that the IPmux IP ToS parameter should be configured to 176 decimals. UDP Destination Port The IPmux uses [...]

  • Page 123

    Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics IPmux-11 Ver. 2.00 Technical Support 6-25 6.7 Technical Support Technical support for this product can be obtained from the local distrib utor from whom it was purchased. For further information, please contact th e RAD distributor nearest you or one of RAD's offices w[...]

  • Page 124

    Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual 6-26 Technical Support IPmux-11 Ver. 2.00[...]

  • Page 125

    IPmux-11 Ver. 2.00 E1 and T1 Connector A-1 Appendix A Connector Wiring A.1 E1 and T1 Connector Balanced Connector The E1 and T1 interfaces of IP mux-11 terminate in an 8-pin RJ-45 connecto r, wired in accordance with Table A-1 . Table A-1. E1/T1 Port Co nnector Pinout Pin Designation Direction Function 1 RD (R) Input Receive data (ring) 2 RD (T) In[...]

  • Page 126

    Appendix A Connector Wiring Installation and Operation Manual A-2 CONTROL Connector IPmux-11 Ver. 2.00 A.2 Ethernet Connectors The network and user Ethernet electrical interfaces terminate in 8-pi n RJ-45 connectors, wired in accordance with Table A-2 . Table A-2. Ethernet Connector Pinout Pin Function 1 Tx+ 2 Tx– 3 Rx+ 4 – 5 – 6 Rx– 7 – [...]

  • Page 127

    IPmux-11 Installation and Operation Manual Appendix A Connector Wiring IPmux-11 Ver. 2.00 External Clock Connector A-3 A.4 External Clock Connector The external clock interface terminates in an 8-pin RJ-45 conne ctor. Table A-4 lists the connector wiring. Table A-4. EXT CL K Connector Pinout Pin Function 1 RxRing (clock in) 2 RxTip (clock in) 3 Ala[...]

  • Page 128

    Appendix A Connector Wiring Installation and Operation Manual A-4 External Clock Connector IPmux-11 Ver. 2.00[...]

  • Page 129

    IPmux-11 Ver. 2.00 Booting IPmux-11 B-1 Appendix B Boot Sequence and Downloading Software This appendix provides a description of the IPmux- 11 boot procedure vi a an ASCII terminal for downloading software. The file system can hold two compressed copies of the IPmux-11 code. One copy is called the operating file, and the other is called the backup[...]

  • Page 130

    Appendix B Boot Sequence and Downloading Software Installation and Operation Manual B-2 Downloading the Application and Configuration Software IPmux-11 Ver. 2.00 From the Boot Manager menu, you can: • List all files stored in the flash memory • Exchange the operating and backup files • Delete the operating file; the backup file becomes the op[...]

  • Page 131

    Installation and Operation Manual Appendix B Boot Sequence and Downloading Software Downloading the Application and Configuration Software B-3 5. Send the software release file to IPmux -11 using the XMODEM utility of yo u terminal application. Once the downloading is completed, IPmux- 11 saves the new release as an active partition, the former act[...]

  • Page 132

    Appendix B Boot Sequence and Downloading Software Installation and Operation Manual B-4 Downloading the Application and Configuration Software IPmux-11 Ver. 2.00[...]

  • Page 133

    IPmux-11 Ver. 2.00 SNMP Environment C-1 Appendix C SNMP Management This appendix provides specific in format ion for IPmux-11 management by SNMP (Simple Network Management Protocol). The SNMP management functions of IPmux- 11 are provide d by an internal SNMP agent. The SNMP management communication uses UDP (User Datagram Protocol), which is a con[...]

  • Page 134

    Appendix C SNMP Management Installation and Operation Manual C-2 SNMP Environment IPmux-11 Ver. 2.00 Management Information Base (MIB) The MIB includes a collection of managed ob jects. A managed o bject is defined as a parameter that can be managed, such as a performance statistics value. The MIB includes the definitions of relevant mana ged o bje[...]

  • Page 135

    Installation and Operation Manual Appendix C SNMP Management IPmux-11 Ver. 2.00 SNMP Environment C-3 MIBs Supported by the IPmux-11 SNM P Agent The interpretation of the relevant MIBs is a function of the SN MP agent of each managed entity. The general MIBs supporte d by the IPmux-11 SNMP agent are: • rfc1213.mib (except the interfaces vie w whic[...]

  • Page 136

    Appendix C SNMP Management Installation and Operation Manual C-4 SNMP Environment IPmux-11 Ver. 2.00 SNMP Communities SNMP delimits management do mains by de fining commun itie s. Each community is identified by a name, which is an alphanumeric string of up to 255 charac ters defined by the user. The IPmux-11 SNMP agent defines strings of up to 10 [...]

  • Page 137

    IPmux-11 Ver. 2.00 I-1 Index —A— AIS, 4-14 Alarms, 1-15, 6-15 Autonegotiation, 4-19 —B— Boot Boot manager, B-1 Bridge aging time, 4-25 configuration, 4-24 MAC table, 4-25 modes, 1-2, 1-17, 1-19, 4-25 Bundles assigning timeslots, 4-20 collecting statistics, 6- 7 configuring connections, 4-20 configuring statistics collection, 6-15 physical l[...]

  • Page 138

    Index Installation and Operation Manual I-2 IPmux-11 Ver. 2.00 —I— Inventory, 4-27 —J— Jitter buffer, 1-12, 6-9 , 6-10 depth, 1-12 max deviation, 6-10 time sinc e, 6-10 —L— LEDs, 3-1 Loopbacks disabling, 6-18 external, 6-17 internal, 6-17 running, 6-18 T1 inband, 6-19 —M— MAC table, 4-25 Management access method, 4-9 authentication,[...]

  • Page 139

    Installation and Operation Manual Index IPmux-11 Ver. 2.00 I-3 environment, C-1 operations, C-1 Statistics bundles, 6-7 E1, 6-1 Ethernet, 6-5 T1, 6-1 Status bundles, 4-30 Diagnostics loopback, 4-28, 6- 18 Eth physical layer, 4-29 system clock, 4-31 TDM physical layer, 4-29 Superuser, 3-6, 4-8 —T— T1 collecting statistics, 6- 1 configuring the p[...]

  • Page 140

    Index Installation and Operation Manual I-4 IPmux-11 Ver. 2.00[...]

  • Page 141

    11 22 33 Front Panel 377-901-02/06 Supplement Drilling T emplate for W all Inst allation This panel is drawn to scale. T o drill the holes for a wall installation, tear this page out of the manual or print it and hold it against the wall. on letter-size paper (8.5"x1 1.0") LEDs facing up - drill at . 1 LEDs facing down - drill at . LEDs f[...]

  • Page 142

    [...]

  • Page 143

    24 Raoul W allenberg St., T el Av i v 69719, Israel T el: +972-3-6458181, F ax: +97 2-3-6483331, +972-3-6498250 E-mail: , W eb site: Customer Response Form RAD Data Communications would like your hel p in improving its product documentation. Please complete and return this form by mail or by fax or s end us an e-mail with your comments. Thank you f[...]

  • Page 144

    [...]

  • Page 145

    Error Report Type of Error(s)  Incompatibility with product or Problem(s):  Difficulty in understanding text  Regulatory in formation (Safety, Compliance, Warnings, etc.)  Difficulty in finding needed informat ion  Missing information  Illogical flow of information  Style (spelling, grammar, references, etc.)  Appearance [...]

  • Page 146

    [...]

  • Page 147

    [...]

  • Page 148

    Publication No. 352-20 0-08/06 www.rad.com INTERNATIONAL HEADQUARTER S: 24 Raoul Wallenberg Street, Tel Aviv 69719, Israel, Tel: 972-3-6458181 Fax: 972-3-6498250, 972-3-647 4436, Email: market@rad.com NORTH AMERICA HEADQUARTE RS: 900 Corporate Drive, Mahwah, N.J. 07430, Tel: (2 01) 529-1100 Toll Free: 1-800-444-7234, Fa x: (201) 529-5777, Email: ma[...]