IKEA FWMND6 manuel d'utilisation

RENLIG FWMND6 GB[...]

[...]

ENGLISH 4[...]

Contents Safety information 4 Product description 7 Control panel 8 First use 10 Personalisation 11 Daily use 11 Helpful hints and tips 14 Washing programmes 15 Consumption values 17 Care and cleaning 18 What to do if… 21 Technical data 24 Installation 24 Electrical connection 25 Environment concerns 26 IKEA GUARANTEE 26 Subject to change without[...]

Installation • A qualified and competent person must do the electrical and the plumbing install ation. • This appliance is heavy. Take care when you move it. • Make sure that the appliance is not dam- aged because of transp ort. Do not connect a damaged appliance. If necessary, con- tact dedicated After Sales Service. • Remove all packaging[...]

• Do not use connection hoses from an old appliance to connect it to the water supply. • The water pressure must be in the limits (refer to the chapter «Technical data» ta- ble). Make sure that the local water au- thority gives you the average mai ns pres- sure in your ar ea. • Make sure that there are no kinks in th e water inlet hose and [...]

Product description 1 2 3 4 5 6 1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Rating Plate 5 Drain pump 6 Adjustable feet Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain re- mover used during the stain action phase (if available). The prewash and soak deter- gent is added at t[...]

Control panel Below is a pi cture of the control panel. It show s the programme selector dial as we ll as the buttons and the indicator lights. These are pr esented by rel evant numbers on the follow- ing pages. 2 1 5 6 7 8 9 10 3 4 1 Programme selector dial 2 Display 3 Door locked indicator light 4 Delay Start button 5 Start/Pause button 6 Extra R[...]

Programme selec tor dial It allows you to switc h the appliance On/Off a nd/or to select a programme. Spin reduction button By pressing this butto n you can change the spin speed of the selected programme. • No Spin option: by selecting this option, all spinning phases are suppressed and replaced by a drain, so as not to wrin- kle the laundry. Re[...]

Delay Start button The programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button. Display 10.1 10.2 The display shows the following information: • 10.1 – Child safety lock. This dev ice permits you to leave the appliance unatten- ded during it's functioning. • 1[...]

Personalisation Acoustic signals The machine is provided with an acoustic de- vice, which sounds in the following cases: • at the end of the cycle • if there is a fault. By pressing the 7 and 8 buttons simultane- ously for about 6 seconds , the acoustic signa l is deactivated (except if there is a fault). By pressing these 2 buttons again, the [...]

2 Pour fabric so ftener into the compart- ment marked (must not exceed the «MAX» mark in the drawer). Close the drawer gently Select the required programme by turning the programme sele ctor dial (1) The appliance is now switched on. The indi- cator light of button 5 starts to blink. At the end of the programme the selector di- al must be turned [...]

• The selected delay can be changed only after selecting the washing pro- gramme again. • The door will be locked throughout the delay time. If you need to open the door, you must first set the wash- ing machine to PAUSE by pressing button 5 and wait a few minu tes be- fore opening the door. After you have closed the door, press the same but- t[...]

Remove the laundry from the drum and care- fully check that the drum is empty. If you do not intend to carry out another wash, close the water tap. Leave the door open to pre- vent the formation of mildew and unpleasant smells. Stand by : once the programme has finished after a few minutes the energy saving system will be enabled. The br ightness o[...]

Washing programmes Please always re fer to the care label symbol of your garment and select the wash ing pro- gramme based on what it says. Programme/ Temperature Type o f laundry Cycle Description Max. Load Red. Load 1) Available Options Detergent Compartment COTTONS 90°-60° White cotton (heavy- normally soiled items). Main wash Rinses Max. fina[...]

Programme/ Temperature Type of laundry Cycle Description Max. Load Red. Load 1) Available Options Detergent Compartment WOOL 40° Special programme for wool garments bearing the «Pure new wool, non-shrink, appliance washable» label. Main wash Rinses Max. final spin at 900 rpm 2 kg Spin No Spin Rinse Hold JEANS 40° With this programme it is possi[...]

Programme/ Temperature Type of laundry Cycle Description Max. Load Red. Load 1) Available Options Detergent Compartment SPIN Separate spin for hand washed gar- ments and after pro- grammes with the Rinse Hold option se- lected. You can choose th e spin speed by pressing the relevant button to adapt it to the fabrics to be spun. Max. final spin at 1[...]

Care and cleaning Warning! Switch the appliance off before you carry out any cleaning or maintenance work. Maintenance Wash With the use of low temperature was hes it is possible to get a build up of residues inside the drum. We recommend that a maintenance wash be performed on a regular basis. To run a maintenance wash: • The drum should be empt[...]

2 Place a container close to the pump (A), to collect any spillage. 3 Pull out the emer- gency emptying cap (B) from the pum p cover, using plie rs. 4 1 2 When no more wa- ter comes out, un- screw the pump cov- er (A) using pliers, and remove the fil- ter. Always keep a rag nearby to dry up spillage of water when removing the pump. Clean the filter[...]

10 Close the pump door. Cleaning the water inlet filters If the appliance takes long to fill with water or doesn't fill, the starting button indicator light blinks in red. Check if the water inlet fil- ters are blocked (see chapter "What to do if..." for more details). Proceed as follows: 1 • Turn off the water tap. • Unscrew the[...]

• place a bowl on the floor and place the end of the emergency emptying hose into the bowl. Remove its cap. The water should drain by gravity into the bowl. When the bowl is full, put the cap back on the hose. Empty the bowl. Repeat the pro- cedure until water stops flowing out; • clean the pump if necessary as previously described; • replace[...]

Problem P ossible cause Solution An option or a programm e that ends with the water still in the tub or a that eliminates all the spinning phases has be en selected. Select the draining or spinning pro- gramme. The appl iance door is open or not closed cor- rectly. Close the door firmly. The appl iance does not start: The plug is not properly inser[...]

Problem P ossible cause Solution The emergency cap for emp tying has not been replaced into the filter or the filter has not been properly screwed in after cleaning action. Refit the emergency cap for empty- ing or screw the filter fully in. The door will not open: The washing programme is still run- ning. Wait the end of washing pro- gramme. The d[...]

Model description (MOD) : ............ ......... 21552 © Inter IKEA Systems B.V. 1999 Made In Italy 000.000.00 Product number (PNC ): ........ ............ ....... Serial number (S. N.): .......... .......... ........... Technical data Dimensions Width (cm) 59,6 Height (cm) 84,5 Depth (cm) 48,4 max. Water supply pressure 1) Minimum Maximum 0,5 bar[...]

If a repair is necess ary, the appliance must be easily access ible for the engineer . Put the appliance adjacent to a water tap and a drain. Water inlet 1 Connect the hose to a tap with 3/4" thread. 2 35° 45° Turn the inlet hose to the left or the right to suit the installa- tion. Tight the lock- nut correctly to pre- vent water leaks. Caut[...]

Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as hous ehold was te. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negati ve [...]

• Deliberate or negli gent damage, damage caused by failure to obse rve operating in- structions, incorrect installation or by con- nection to the wrong voltage, damage caused by chemical or electro-chemical re- action, rust, corrosion or water damage in- cluding but not limited to damage caused by excessive lime in the water supply, damage cause[...]

3. ask for clarification on user manual con- tents and specifi cations of the IKEA appl i- ance. To ensure that we provide you with the best assistance, please read carefully the Assem- bly Instructions and/or the User Manual sec- tion of this booklet before contacting us. How to reach us if You need our service Please refer to the last page of thi[...]

Country Phone number Call Fee Opening time België 070 2 4 6 0 1 6 Binnenlandse gespreksk osten 8 tot 2 0 W eekdagen Belgique T arif des appels nationaux 8 à 20. En semaine България 0 7 00 1 0 2 1 8 Такса за повикване от страната От 9 до 1 8 ч в работни дни Česká r epublika 2 46 0 1 9 7 2 1 Cena [...]

30[...]

31[...]

© Inter IKEA Syst ems B.V. 2008 AA-504245-1 132939330-B -012011[...]