Honeywell 6110 manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122

Aller à la page of

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Honeywell 6110. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Honeywell 6110 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Honeywell 6110 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Honeywell 6110 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Honeywell 6110
- nom du fabricant et année de fabrication Honeywell 6110
- instructions d'utilisation, de réglage et d’entretien de l'équipement Honeywell 6110
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Honeywell 6110 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Honeywell 6110 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Honeywell en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Honeywell 6110, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Honeywell 6110, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Honeywell 6110. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    Dolphin ™ 6110 Mobile Computer with Windows ® Embedded Handheld 6.5 User’s Guide[...]

  • Page 2

    Disc laimer Honeyw ell International Inc. (“HII”) reser v es the right to make changes in specifications and other inf or- mation contained in this document without prior notice, and the reader should in all cases consult HII to deter mine whether any such changes ha v e been made . The inf ormation in this publication does not rep- resent a co[...]

  • Page 3

    iii Chapter 1 - Agency Approvals Chapter 2 - Getting Started Out of the Box ..................................................................................................................... 2-1 Initial Setup for Dolphin 6110 Terminals ............................................................................. 2-1 LED Indicators ..............[...]

  • Page 4

    iv Alpha/Numeric Modes ......................................................................................................... 4-2 Alpha Indicators on the Number Keys ........................................................................... 4-2 Function Key Combinations ...........................................................................[...]

  • Page 5

    v Connections Menu ............................................................................................................... 8-3 Receiving Data .................................................................................................................... 8-3 Connections Manager ...........................................................[...]

  • Page 6

    vi Chapter 12 - Dolphin 6110 Net Base Device (Model 6100-NB) Overview ............................................................................................................................ 12-1 Parts and Functions ........................................................................................................... 12-2 Front Panel .....[...]

  • Page 7

    1-1 1 Agency Appr ov als Label Locations Dolphin 6110 mobile computers meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. Read these guidelines carefully befor[...]

  • Page 8

    1-2 N4313-TTL Safety & RF Appr ov als by Country: * Does not apply to N4313-TTL laser engine. R&TTE Compliance Statement—802.11a/b/g/n and/or Bluetooth Dolphin RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/ EC). This product is marked with in accordance with the Class II product requirem[...]

  • Page 9

    1-3 CB Scheme Certified to CB Scheme IEC 60950-1. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. NII frequency band 5150-5250 MHz is restricted to indoor use only. Dolphin RF T erminal—802.11a/b/g/n and/or Bluetooth This device complies with Part 15 of t[...]

  • Page 10

    1-4 This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numérique de la Classe B est conforme[...]

  • Page 11

    2-1 2 Getting Star ted Out of the Bo x Verify that your carton contains the following items: • Dolphin 6110 mobile computer (the terminal) • Battery pack (3.7v, Li-Ion) • AC power supply (KSAS0100500200D5; Input: 100-240V AC, 50/60Hz 0.4 Amps; Output: 5 Volts DC, 2.0 A) • Localized plug adapters Note: Be sure to keep the original packaging [...]

  • Page 12

    2-2 We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Step 2. Charge the Batteries We recommend use of Honeywell peripherals, power cables, and power adapters that comply with L.P.S. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage n[...]

  • Page 13

    2-3 The power adapter on the power cable converts the voltage from the power source to 5 volts DC. Only power adapter cables from Honeywell convert the voltage appropriately. The power cable contains a plug adapter for each geography (US, UK, EU, etc.). Step 3. Boot the Terminal The terminal is not connected to an external power source, it begins b[...]

  • Page 14

    2-4 Home Screen After the Dolphin ter minal initializes the first time , you see the Home screen. T ap to reach the Star t screen from the home screen. T ap to access the Dolphin Wireless Manager Window (see page 8-7) from the home screen. Title Bar The Title bar , located at the top of the screen, displays the activ e program, the status of v ar i[...]

  • Page 15

    2-5 Horizontal Scr oll Indicator Meaning Synchronizing data The ter minal could not synchronize data with the w orkstation via ActiveSync. New e-mail New te xt message New v oicemail New instant message Ringer off A batter y error has occurred. Replace the batter y pack with a Hone ywell Li-poly or Li-ion batter y pack. Batter y is has a full charg[...]

  • Page 16

    2-6 Horizontal Scr oll The Horizontal Scroll, located at the top of most application windows , provides access to additional application screens. Y ou can flic k left or r ight on the scroll or tap each label on the scroll, until you get to the desired screen. T apping a label to the left or r ight of the center item brings new labels into view . N[...]

  • Page 17

    2-7 File Explorer Y ou can also use the File Explorer to find files and organiz e these files into folders . 1. Tap > File Explorer . 2. Tap the Up button at the bottom of the screen to move up one level in the directory. 3. You can move files in File Explorer by tapping and holding on the item you want to move, then tapping Cut or Copy on popup[...]

  • Page 18

    2-8 File Pr o visioning on the Dolphin 6110 IPSMHoneywell The IPSM f older is the only par tition on the ter minal that persists across a kernel upgrade (*.UPG file e xtension). Dur ing a kernel upgrade, files are automatically copied from the IPSMHoneywell f older and then installed in the Honeywell (root file system) f older as par t of the [...]

  • Page 19

    2-9 T urning P ower On/Off T o tur n the ter minal On , press the Po w e r button . T o tur n the ter minal Off : 1. Press and hold the Po w e r button f or appro ximately 4 seconds until the options menu displa ys. 2. Tap Power off . Suspend Mode Suspend mode diff ers from Po wer off mode. P ower off mode is the equiv alent to having no batter y o[...]

  • Page 20

    2-1 0[...]

  • Page 21

    3-1 3 Har dware Overview Standar d T erminal Configurations Dolphin P eripherals/Accessories for the Dolphin 6110 The following items are sold separately and enhance your Dolphin 6110’s capabilities. Dolphin HomeBase ™ Device This charging and communication cradle supports USB and RS-232 communication, enabling your terminal to interface with t[...]

  • Page 22

    3-2 Dolphin NetBase Device The Dolphin NetBase device, enables up to four Dolphin 6110 mobile computers to communicate with a host device over an Ethernet network. For more information, see Dolphin 6110 Net Base Device (Model 6100-NB) on page 12-1. USB Comm unication Cable f or the Dolphin 6110 The USB Communication Cable for the 6110 is used when [...]

  • Page 23

    3-3 Scan/Decode LED Note: The LED is user-programmable. Scan Key The SCAN key is centrally located for easy access with the right or left hand. When pressed, the SCAN key activates the scanner/imager. The SCAN key also functions as a system wakeup control for the terminal. Keypad A 28-key shifted alpha numeric keypad is included on the unit. Microp[...]

  • Page 24

    3-4 a screen protector replacement program to ensure that screen protectors are replaced periodically when signs of damage/wear are noticeab le. Replacement screen protectors can be purchased directly from Honeyw ell. Please contact a Honeywell sales associate f or details. Honeyw ell also mandates use of a proper stylus, which is one that has a st[...]

  • Page 25

    3-5 Keep in mind that the hand strap covers the battery. When you want to replace the battery, you will need to adjust the hand strap accordingly. Finger Saddle This is a slightly depressed and angled area of the back housing that is designed to cradle or “saddle” your finger while holding the terminal. This unique ergonomic design makes the te[...]

  • Page 26

    3-6 Right Side P anel Features Headset Jack The rubber door on the right side panel provides access to the headset jack. This is a 3.5mm audio jack that supports a headset with a mono speaker and microphone. When closed, the side door seals the terminal from moisture and particle intrusion thus preserving the terminal’s environmental rating. Side[...]

  • Page 27

    3-7 Bottom P anel Features DC Power Jack The DC power jack receives external power from the Dolphin power cable that is included in the box with the terminal. When connected to the Dolphin power cable, the terminal is powered and the battery pack is charging. I/O Connector The I/O mechanical connector is designed to work exclusively with Dolphin 61[...]

  • Page 28

    3-8 The battery must be charged to full capacity before using the Dolphin 6110 for the first time! Charge the battery pack with the Dolphin USB Charging/Communication cable until the LED turns green (red while charging). The average charge time for a fully depleted battery is 7 1/2 hours. It takes less time if the battery has some charge. Battery P[...]

  • Page 29

    3-9 Charging Time The standard capacity 2200mAh Li-ion battery pack requires 6 hours to charge to full capacity, while the extended capacity 3300mAh pack requires 9 hours. It takes less time if the battery has some charge. Managing Battery P ower Data and files saved on the Dolphin terminal may be stored in RAM memory; therefore, maintain a continu[...]

  • Page 30

    3-1 0 • Improper battery use may result in a fire, explosion or other hazard. • We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may pose a personal hazard to the user. • Only use the battery for the system for which it is specified. Do not use a battery in any other manner outside its intended use in Dolph[...]

  • Page 31

    3-1 1 The rubber door is required for 1) proper functioning of the SD card and 2) preserving the environmental rating for water sealing. Do not remove the rubber door. Note: Do not use the terminal when the access door is open. When this door is fastened securely and properly, the memory interface is sealed against moisture and particle intrusion, [...]

  • Page 32

    3-1 2 Dolphin 6110 T echnical Specifications Operating System Microsoft Windo ws Embedded Handheld 6.5 Development En vironment Honeyw ell SDK f or Windows Embedded Handheld 6.5 Application Software Honeyw ell P ower T ools and Demos Processor TI OMAP3715 800MHz Memory 512 MB RAM X 512 MB Flash Expansion Memory User accessible Micro SD memory card [...]

  • Page 33

    3-1 3 WLAN Security OPEN, WEP , 802.1x, WPA-PSK/EAP, WPA2-PSK/EAP, EAP-LEAP, EAP-TLS, EAP- TTLS, EAP-PEAP, EAP-FAST, CCKM Operating T emperature 14° to122°F (-10° to 50°C) Charging T emperature 32° to 113°F (0° to 45°C) Storage T emperature -4° to 158°F (-20° to 70°C) Humidity 95% humidity , non-condensing Construction High impact resis[...]

  • Page 34

    3-1 4[...]

  • Page 35

    4-1 4 Using the K e ypad Overview Navigation K eys Located in the center of the keypad for easy access with either hand, the navigation keys enable you to move the cursor up and down lines and from character to character. Basic Ke ys Name Function ALPHA T oggles the ke ypad between alpha (upper and lo wercase) and n umeric modes. The 'A/a/1”[...]

  • Page 36

    4-2 Alpha/Numeric Modes The keypad defaults to numeric mode. Use the ALPHA key to toggle between numeric and alpha modes. Pressing the ALPHA key locks the keypad in numeric mode, alpha mode (lowercase), or alpha mode (uppercase). The Title Bar on the screen displays an icon indicating the alpha/numeric status of the keypad. Alpha Indicators on the [...]

  • Page 37

    4-3 CTRL Ke y Combinations The Control key (CTRL) modifies the next key pressed to type specific characters. The keypad is color- coded in yellow to indicate these key combinations. Note: The color-coded indicators are located below each key. Pr ogram Buttons Buttons can be programmed to execute different functions using the Program Button program [...]

  • Page 38

    4-4 F3 User programmab le F4 User programmab le Ke y Combination Function[...]

  • Page 39

    5-1 5 Using the Image Engine Overview The Dolphin 6110 houses a compact image engine using Adaptus ™ Imaging Technology that instantly reads popular 1D and 2D bar codes and supports omni-directional aiming and decoding f or greater fle xibility in real-wor ld settings. The image engine can also capture digital images, such as signatures and pictu[...]

  • Page 40

    5-2 Suppor ted Bar Code Symbologies Symbology T ype Symbology Name 1D Symbologies Codabar Code 3 of 9 Code 11 Code 32 Phar maceutical (P ARAF) Code 93 Code 128 EAN with Add-On EAN with Extended Coupon Code EAN-13 GS1 Databar Interleav ed 2 or 5 Matrix 2 of 5 Plessey P osiCode Straight 2 of 5 IA T A Straight 2 of 5 Industrial T elepen T r ioptic Cod[...]

  • Page 41

    5-3 Activ ating the Engine When a scanning application is open, press the Scan key to activate the image engine. Using Demos Dolphin Demos are software utilities loaded on Dolphin terminals that demonstrate the advanced features of the terminal. There are two Demos that feature the image engine: Image Demo and Scan Demo. To access these demos, tap [...]

  • Page 42

    5-4 Uploading Images Image files can be uploaded to a host workstation via Microsoft ActiveSync and a Dolphin communication peripheral or your wireless radio connection. Refer to the Communication or Working with the Bluetooth Radio chapters. Note: You can download the most current version of ActiveSync from www.microsoft.com.[...]

  • Page 43

    6-1 6 Using the Laser Engine Overview The Dolphin 6110 (N4313-TTL laser version) contains a laser diode that emits a beam toward an oscillating mirror that scans through the code and the reflected light is bounced off of two mirrors back to the collector. The 6110 Laser reads all popular 1D bar codes. A v ailable Laser Engines The Dolphin 6110 can [...]

  • Page 44

    6-2 Activ ating the Engine When a scanning application is open, press the Scan key to activate the laser engine. Using Demos Dolphin Demos are software utilities loaded on Dolphin terminals that demonstrate the advanced features of the terminal. Decoding a Bar Code 1. Tap > Demos > Scan Demo . 2. Position the Dolphin terminal over one of the [...]

  • Page 45

    7-1 7 System Settings Overview Customized settings are a vailab le on the System Settings menu. T ap > Settings and the settings screen opens. Icon Description Bluetooth Configure the Bluetooth radio . See Enabling the Bluetooth Radio on page 9-1. Clock & Alarms Set the system clock, date , time and schedule alar ms. See Clock & Alarms o[...]

  • Page 46

    7-2 Cloc k & Alarms The Clock & Alarms settings can be accessed from the Home screen or the Settings Menu. 1. On the Home screen, tap the line that displays the time and date OR Tap > Settings > Clock & Alarms , The Clock Settings screen appears . This setting sets the system clock. All scheduled items run accord- ing to this sett[...]

  • Page 47

    7-3 P ersonal Menu T o access the P ersonal Menu, tap > Settings > P ersonal . The screen opens displaying the P ersonal Menu. Buttons The Buttons setting programs certain Function buttons to launch applications or e xecute commands . Icon Description Buttons Program Function k eys 1-4 to perf or m specific tasks. See Buttons on page 7-3. Own[...]

  • Page 48

    7-4 Changing Button Assignments 1. Tap > Settings > Personal > Buttons . Note: The buttons that appear on this window are the only buttons that can be programmed via the Buttons setting. You cannot add buttons to this window. 2. To change Function key assignment, tap on the name of the button in the Button column, and then select a program[...]

  • Page 49

    7-5 Pr ogram Buttons The Program Buttons setting prog rams various ke ypad ke ys and Functions ke ys 5 through 11 to launch applications or e xecute commands . Progr amming Buttons 1. Tap > Settings > Personal > Program Buttons . Note: The buttons that appear on this window are the only buttons that can be programmed via the Buttons settin[...]

  • Page 50

    7-6 Using File Explorer If you do not see the prog ram listed, you can either use File Explorer to mo v e the progr am or Activ eSync on the workstation to create a shor tcut to the program and place the shor tcut in the Star t Menu f older . Note: We recommend that you Copy and Paste Shortcut so that you do not alter your program configurations by[...]

  • Page 51

    7-7 Note: If there is no blank space available in the window, tap on Menu > Edit > Paste Shortcut . 4. Tap to verify that the program now appears on the Start menu. Using Activ eSync on the W orkstation Here, y ou are performing the same basic process as on the ter minal, except that y ou are using the Explore utility (Windows Explorer) to co[...]

  • Page 52

    7-8 System Menu The System menu enab les you to v erify and sometimes alter system parameters. T o access the System menu, go to > Settings > System . T ap the appropriate icon to open that system setting. Icon See P age About See About on page 7-9. Backlight See Backlight on page 7-9. P ower See Power on page 7-14. Certificates See Certifica[...]

  • Page 53

    7-9 About The About system setting displa ys specific information about the ter minal. It contains three screens: Version Screen Displays the information about the operating system, memory, and processor. Device ID Screen Displays the information the terminal uses to identify itself to other devices. It can be important to know this information if [...]

  • Page 54

    7-1 0 Ta p > Settings > System > Backlight . The Dim Backlight tab deter mines the backlight timeout when the terminal is running on batter y/e xter- nal/USB pow er . The Brightness tab deter mines the backlight brightness. The default is 5. The Ke ypad Backlight tab deter mines the if the backlight is on with the displa y or off . Certifi[...]

  • Page 55

    7-1 1 Encryption Encr yption gives y ou the option of encr ypting files placed on storage cards so that those files cannot be read by an y other device . HSM SystemInf o The HSM SysInf o screen provides impor tant system information including fir mware v ersions, DLL v ersions, system par ameters, as well as network and radio inf or mation. HSM Sys[...]

  • Page 56

    7-1 2 Err or Reporting Error Repor ting gives y ou the option of enabling or disabling the error reporting function of Windows Embedded Handheld 6.5. Managed Pr ograms Managed Programs are a list of prog rams that are managed if enrolled to enter pr ise domain. Managed Programs is the client-side that w or ks with the ser ver product System Center [...]

  • Page 57

    7-1 3 Main Screen The Main screen displa ys the usage statistics of the flash memor y . Storage Card Screen The Storage Card screen displa ys the current capacity and usage statistics of the selected memor y type: RAMDISK, IPSM, or Storage Card. Select the memory type from the drop-down list. RAMDISK is selected by def ault. • IPSM (Internal Pers[...]

  • Page 58

    7-1 4 • Storage Card You can install one memory card in Dolphin terminals (see Right Side Panel Features on page 3-6) . If a storage card is installed in the terminal, you can select it in the drop-down list and see capacity and usage statistics for the card. P ower P ow er system settings contains f our tabs: Batter y , Advanced, Wak eup Source,[...]

  • Page 59

    7-1 5 Note: When the terminal “powers off”, it enters Suspend Mode (see page 2-9). Adv anced T ab Deter mines pow er time-outs. Fo r On battery power , select from the drop-down list, the number of minutes of inactivity y ou want to pass bef ore the terminal powers off when running on batter y power . Fo r On external po wer , select from the d[...]

  • Page 60

    7-1 6 Regional Settings Regional Settings enables y ou to customize the appearance and f or matting to your geog raphic region. Specifically , you can customize n umbers (i.e., n umber of decimal places allowed), currency (i.e.,using the $ or € symbol), time, and date . These specifications apply to all screens, including the Home screen. The Reg[...]

  • Page 61

    7-1 7 2. Tap Remove . The following message appears: 3. Tap Yes . Wait while the program is removed. 4. Verify that the program no longer appears in the list.[...]

  • Page 62

    7-1 8 Screen The Screen system setting contains three screens: General, Clear T ype, and T e xt Size . General Screen Orientation The General screen enab les you to set the dynamic screen rotation. Three choices of screen orientation are suppor ted: P or trait, Landscape (right-handed), and Landscape (left- handed). Align Screen The General T ab al[...]

  • Page 63

    7-1 9 SIP Configuration The SIP Config settings screen enables y ou to configure Session Initiation Protocol (SIP) for V oice Over IP (V0IP) and T elephony communication. T o access the SIP Config screens, tap T ap > Settings > System > SIP Config . T ext Size Screen The T e xt Size screen enables y ou to perform font scaling within cer ta[...]

  • Page 64

    7-2 0 T ask Manager The T ask Manager provides inf or mation about applications and processes r unning on your mobile com- puter . Y ou can use the T ask Manager to monitor the memor y and CPU usage of specific applications and processes. Chec k the T ask Manager when you are receiving out of memory errors or when the mobile computer is running slo[...]

  • Page 65

    7-2 1 Processes T o view inf or mation about the processes r unning on the mobile computer , tap the Menu button at the bottom of the screen, then tap View > Processes .[...]

  • Page 66

    7-2 2[...]

  • Page 67

    8-1 8 Comm unication Connecting the Dolphin 6110-USB Comm unication Cable To facilitate USB communication between the Dolphin terminal and the host workstation, you may connect your unit to a host by using either the optional Dolphin 6110-USB Communication Cable or HomeBase. If you use the Communication Cable, slide the cable unit onto the bottom o[...]

  • Page 68

    8-2 2. If you do not disconnect the cable, the option will be grayed out. 3. Re-connect the cable.[...]

  • Page 69

    8-3 Connections Menu The Connections system setting provides access to the terminal’ s various wireless communication options. Note: All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP). Receiving Data The Beam Setting must be set to receive all incoming beams from other infrared devices. Icon Tapping this icon… Beam [...]

  • Page 70

    8-4 1. Verify that beam settings are set to receive. Tap > Settings > Connections > Beam and check the box. Connections Manager Microsoft’ s Connections Manager sets up multiple network connections to Internet Ser vice Providers (ISPs) via e xter nal modem. Do NOT enter connection parameters in the Connections Manager if: • you are usi[...]

  • Page 71

    8-5 T asks The T asks screen enables y ou to initially configure, and then manage netw or k settings when using a modem. Select an item in this list and then complete the setup screens that f ollow with the appropriate inf or mation for y our networ k. My ISP The links under this heading enables y ou to add and manage modem connections to an ISP . [...]

  • Page 72

    8-6 Adv anced The Adv anced screen enables y ou to select the default netw or k, dialing r ules, and IP address e xceptions f or modem connections. Note: You should not need to change Advanced settings because most ISPs now use DHCP addresses.[...]

  • Page 73

    8-7 Dolphin Wireless Manager The Dolphin Wireless Manager provides a centr alized interf ace that enables and disab les all the on- board radios . Each radio has its o wn configuration program. The Dolphin Wireless Manager also pro- vides shor tcuts to the configuration utilities f or each radio . T ap on the Home screen to access the Dolphin Wirel[...]

  • Page 74

    8-8 Enabling the Radios 1. T ap on the Home screen to access the Dolphin Wireless Manager . 2. Tap anywhere inside the rectangle of the radio you want to enable. 3. The radio begins activating. 4. When the radio is activated (i.e., transmitting a signal), the OFF button changes to ON . Note: If applicable, information about the radio appears in the[...]

  • Page 75

    8-9 Netw ork Car ds The Network Cards screen allows y ou to set and configure the type of Networ k Adapter the Network card in the ter minal uses. T o access this option, T ap > Settings > Connections > Network Car ds . Y ou can modify the adapter settings (e.g., Name Servers or IP address) b y tapping on the adapter type or highlighting t[...]

  • Page 76

    8-1 0 If Activ eSync (4.5 or higher) or Windows Mobile De vice Center is not installed on the host workstation, you can do wnload and install the most current version of the softw are from the Microsoft Web site (http://go .microsoft.com/fwlink/?LinkId=147001). Note: ActiveSync on your Dolphin terminal works with Windows Mobile Device Center on hos[...]

  • Page 77

    8-1 1 Setting Up the Host W orkstation T o synchronize data betw een the terminal and the workstation, ActiveSync (v4.5 or higher) or Windows Mobile Device Center must be configured for same communication type on both the host workstation and the Dolphin terminal. Activ eSync V er ify that Activ eSync is configured to use the appropriate communicat[...]

  • Page 78

    8-1 2 Installing Additional Software Dolphin ter minals ship with the operating system, radio driv ers, and custom Honeyw ell software already installed. These are the default prog rams that install when y our ter minal first boots up. Y ou can install additional software prog rams to the terminal provided that the f ollowing parameters are met: ?[...]

  • Page 79

    8-1 3 a. Open ActiveSync and click Explore, or b. Open Windows Mobile Device Center and click File Management 2. On the workstation, navigate to the workstation folder containing the program file(s). Copy and paste the file(s) into the Program Files folder on the terminal. • If you want the program to be part of the Autoinstall that occurs after [...]

  • Page 80

    8-1 4 3. Read any installation instructions, Read Me files, or documentation that comes with the program. Many programs provide special installation instructions. 4. Download the program to the terminal directly from the Internet. You would normally store the program in the Program Files folder unless another location is required by the program. 5[...]

  • Page 81

    9-1 9 W orking with the Bluetooth Radio Enabling the Bluetooth Radio Y ou enable the Bluetooth r adio in the Dolphin Wireless Manager (see page 8-7). 1. T ap on the Home screen to access the Dolphin Wireless Manager . 2. Tap anywhere inside the Bluetooth rectangle and Bluetooth begins activating. 3. When the radio is activated (i.e., transmitting a[...]

  • Page 82

    9-2 P airing and T rusted Devices The ter minal does suppor t pair ing. P air ing happens dur ing general connection setup . P aired devices are "trusted" devices . This means that there is unrestricted access to all ser vices (including ser vices that require authorization and authentication). A connection can e xclude pair ing. A device[...]

  • Page 83

    9-3 4. Select a device from the list and tap Next . 5. You are prompted to enter a passcode. • If the device has a specific passcode, enter it in the Passcode field and tap Next . When attempting to connect to a printer or headset with Bluetooth capabilities, the passcode may default to either 1111 or 0000. If there is no default, consult the dev[...]

  • Page 84

    9-4 8. When the connection is complete, a list of matching and supported services on the device appears. Only the services that are mutually supported on both devices appear in the Partnership Settings window. 9. Select the services you want to use and tap Save . The services on the new devices have to be selected or the pairing won’t include tho[...]

  • Page 85

    9-5 4. The Bluetooth radio begins searching for devices. 5. Tap the device to begin sending the selected file. 6. While trying to connect, the selected device reads “Pending”. 7. When the file is being transferred, the selected device reads “Sending”. When a Bluetooth de vice is first f ound, it appears as an Unknown de vice; the icon indic[...]

  • Page 86

    9-6 Making the T erminal Discoverable By def ault, the Dolphin ter minal is not discover able, which means that the terminal will not be found b y other Bluetooth de vices. T o make the terminal discov erable , tap Mode on the Hor izontal scroll. Select Make this device visib le to other devices and tap OK .[...]

  • Page 87

    1 0-1 10 Dolphin HomeBase (Model 6100-HB)/eBase (Model 6100-EHB) De vice Overview Note: The information in this chapter applies to both the Dolphin HomeBase and Dolphin eBase devices unless otherwise indicated. As the hub of your Dolphin 6110 system, the Dolphin HomeBase charging and communication cradle supports High-speed USB 2.0 and RS-232 commu[...]

  • Page 88

    10 - 2 Fr ont P anel Terminal Well Place the Dolphin terminal in the terminal well to communicate with a host device, power the terminal, and charge the terminal’s battery. Make sure that the device is securely seated. Rubber Feet The bottom panel has four rubber feet to stabilize the unit on a flat surface. You can set the base on a dry, stable [...]

  • Page 89

    1 0-3 Bac k P anel DC Power Jack Connect the power cable to this power jack; see Powering the Dolphin HomeBase Device on page 10-4. USB Port The USB port is High-speed (v2.0). Using the USB cable, you can connect the base to a USB- compliant device to facilitate USB communication to and from the terminal. USB communication occurs through Microsoft [...]

  • Page 90

    10 - 4 P owering the Dolphin HomeBase De vice The terminal requires 5 volts DC input for communication and battery charging; the power adapter on the power cable converts the voltage from the power source to 5 volts DC. Only power adapter cables from Honeywell convert the voltage appropriately. The same power cable that ships with each terminal can[...]

  • Page 91

    1 0-5 The following illustration shows how to install the ferrite on the cable. It should be placed approximately 1.57 inches (40mm) from the RJ45 plug. The cable should be looped around the core, as shown. Charging the Battery The base powers the terminal and fully charges its battery pack in an average of 7 1/2 hours for a fully depleted battery.[...]

  • Page 92

    10 - 6 Charging a Spare Battery The base can also charge a second battery while the terminal is positioned in the base. The second battery can be inserted in the battery charging well in back of the terminal connection. Place the battery in the well with the label facing up and toward the back of the unit. Angle the battery as shown. Once the conne[...]

  • Page 93

    1 0-7 T echnical Specifications Structural Dimensions 5.3 in. high X 4.5 in. wide X 3.1 in. deep (13.5 cm. X 11.4 cm. X 7.9 cm.) W eight Dolphin HomeBase - 11.0 oz. (313g) Dolphin eBase - 11.3 oz (320g) Material P olycarbonate Color Black En vironmental Operating T emperature 14° to 122°F (-10° to +50°C) Storage T emperature -4° to 158°F (-20[...]

  • Page 94

    10 - 8[...]

  • Page 95

    11 - 1 11 Dolphin 6110 Char geBase Device (Model 6100-CB-1) Overview The Dolphin 6110 ChargeBase is a 4-slot charging cradle that can po wer f our Dolphin ter minals, and charge their batteries in 6 hours for a standard battery and 9 hours for an e xtended batter y . We recommend use of Honeywell peripherals, power cables, and power adapters that c[...]

  • Page 96

    11 - 2 P ar ts and Functions Fr ont P anel Terminal Wells The ChargeBase contains four terminal wells. Each well has its own dedicated LED indicator. The ChargeBase completely charges the battery in a Dolphin terminal in 6 hours for the standard 3.7V battery or 9 hours for the extended 3.7 battery. Bac k P anel DC Power Jack Use the power cable fro[...]

  • Page 97

    1 1-3 We recommend use of Honeywell peripherals, power cables, and power adapters that comply with L.P.S. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty. Connecting P ower to the Char g eBase 1. Plug the A/C power cord into the power adapter. 2. Plug the power connector cable into the po[...]

  • Page 98

    11 - 4 Mounting the ChargeBase Set the ChargeBase on a dr y , stab le surf ace, such as a desktop or workbench near an electr ical outlet. Be sure to provide enough w orkspace with good lighting for the user to vie w and operate the Dolphin ter- minal while it is in the ChargeBase. When choosing a location, bear in mind that the mounting location m[...]

  • Page 99

    1 1-5 3. Then, using the appropriate nuts and bolts, secure the DIN Rail to a stable, flat horizontal surface. W all Mounting The optional wall mount br ac ket enab les secure mounting of the base on a ver tical surf ace. The wall mount brac ket can be used in conjunction with the DIN rail b ut does not require the DIN Rail for use . Hardware (Prov[...]

  • Page 100

    11 - 6 2. Slide the bolt through the wall bracket, and thread the toggle nut onto the bolt. 3. Press the ends of the toggle nut together, and insert the bolt/nut into the pilot hole until the nut clears inside wall surface. The toggle nut should spring open preventing the screw from being removed. 4. Repeat steps 2 and 3 for each of the remaining m[...]

  • Page 101

    1 1-7 3. Slide the washer onto the screw and tighten the nut to secure the assembly. 4. Remove the rubber feet on the bottom of the ChargeBase. 5. Slide the base onto the DIN Rail using the slot on the bottom of the base. W all Brack et, Qty . 1 DIN Rail, Qty . 1 W asher , Qty . 1 Nut, Qty . 1 Screw , Qty . 2 W asher , Qty . 1 Nut, Qty . 1 W all Br[...]

  • Page 102

    11 - 8 T ec hnical Specifications Structural Dimensions 3.2 in. high X 16.37 in. wide X 6.1 in. deep (8.2 cm. X 41.6 cm. X 15.5 cm.) W eight 35.27 oz. (1Kg) Material P olycarbonate Color Black En vironmental Operating T emperature 14° to 122°F (-10° to +50°C) Storage T emperature -4° to 158°F (-20° to +70°C) Charging T emperature 32° to 10[...]

  • Page 103

    12 - 1 12 Dolphin 6110 Net Base De vice (Model 6100-NB) Overview The Net Base enables up to f our Dolphin 6110 mobile computers to communicate with a host de vice ov er an Ether net network. In addition, the Net Base provides a second RJ45 Ether net por t for connec- tion to an additional de vice such as a pr inter , workstation, eBase, or another [...]

  • Page 104

    12 - 2 P ar ts and Functions Fr ont P anel Terminal Wells The Net Base contains four terminal wells. Each well has its own dedicated Power/Dock LED and COMM LED indicator. Place the Dolphin terminal in any one of the four wells to communicate with a host device, power the terminal, and charge the installed battery pack. The Net Base completely char[...]

  • Page 105

    1 2-3 Bac k P anel DC Power Jack Use the power cable from Honeywell that comes with the Net Base to supply power to this power jack. For more information, see Power on page 12-4. RJ45 Ethernet Ports The Net Base contains two RJ45 Ethernet ports. You can connect the Net Base to an Ethernet- compliant device to facilitate Ethernet communication to an[...]

  • Page 106

    12 - 4 Bottom P anel F or details on how to mount the Net Base, see Mounting the Net Base on page 12-6. P ower The ter minal requires 12 V olts DC input for comm unications and batter y charging; the pow er adapter on the pow er cab le conv er ts the voltage from the pow er source to 12 volts DC . Only the Hone ywell 12V/ 8.5A pow er supply provide[...]

  • Page 107

    1 2-5 Charging the Battery The base provides po wer to the Dolphin ter minals and allows the charging of the batteries in the ter minals. The batter y of each ter minal charges in 6 hours f or the standard 3.7V batter y or 9 hours f or the e xtended 3.7V batter y . The intelligent batter y charging system incor- porated into all Dolphin terminals p[...]

  • Page 108

    12 - 6 4. Insert the Dolphin into one of the terminal wells. The DOCK LED for the well changes from red to green and the connection icon on the Dolphin’s title bar changes from to . 5. By default, the DHCP server assigns a unique IP address to each of the Dolphin terminals docked in the Net Base. This IP address can be used by any application on [...]

  • Page 109

    1 2-7 Desk Mounting The DIN Rail (7.5 X 35 mm) slot on the bottom panel enables secure mounting on a horizontal surf ace. Hardware Required • 3/16 in. dia x 5/8 in. long pan head screw • 1/2 in. OD x 7/32 in. ID x 3/64 in. thick • 3/16 in. dia nut Installing the DIN Rail 1. Slide the DIN Rail into the DIN Rail slot on the bottom panel of the [...]

  • Page 110

    12 - 8 Hollow Wall Installation 1. Drill four pilot holes in the wall using a 7/8 in. drill bit. 2. Slide the bolt through the wall bracket, and thread the toggle nut onto the bolt. 3. Press the ends of the toggle nut together, and insert the bolt/nut into the pilot hole until the nut clears inside wall surface. The toggle nut should spring open pr[...]

  • Page 111

    1 2-9 3. Slide the washer onto the screw and tighten the nut to secure the assembly. 4. Remove the rubber feet on the bottom of the Net Base. 5. Slide the base onto the DIN Rail using the slot on the bottom of the base. W all Brack et, Qty . 1 DIN Rail, Qty . 1 W asher , Qty . 1 Nut, Qty . 1 Screw , Qty . 2 W asher , Qty . 1 Nut, Qty . 1 W all Brac[...]

  • Page 112

    12 - 10 T ec hnical Specifications Structural Dimensions 3.17 in. high X 17.64 in. wide X 3.97 in. deep (8.05 cm. X 44.8 cm. X 10.1 cm.) W eight 28.4 oz. (805g) Material P olycarbonate Color Black En vironmental Operating T emperature 14° to 122°F (-10° to +50°C) Storage T emperature -4° to 158°F (-20° to +70°C) Charging T emperature 32° t[...]

  • Page 113

    12 - 11 Fire Retardant: UL 94-V0 T ec hnical Specifications[...]

  • Page 114

    12 - 12[...]

  • Page 115

    1 3-1 13 Dolphin QuadChar ger Device Overview The Dolphin QuadCharger device is a four-slot charging station that charges up to four Dolphin 6110 Li- Ion battery packs in an average of 7 1/2 hours for a fully depleted battery. It takes less time if the battery has some charge. For more details about charging, see Battery Charging on page 13-2. We r[...]

  • Page 116

    13 - 2 Power Supply Connector Use this connector to attach the power supply to the charger. The universal power supply accepts input voltages between 90–265 volts. Battery Charging Charging Process This charger charges Dolphin 6110 Li-Ion battery packs in an average of 7 1/2 hours for a fully depleted battery. It takes less time if the battery ha[...]

  • Page 117

    1 3-3 3. When the Status LED turns green, the battery in the slot has completed charging. Recommendations f or Storing Batteries To maintain top performance from batteries, follow these storage guidelines: • Avoid storing batteries outside of the specified temperature range of -4 to 104°F (-20 to 40°C) or in extremely high humidity. • For pro[...]

  • Page 118

    13 - 4 T echnical Specifications Structural Dimensions 7.3 in. long X 3.7 in. wide X 2.4 in. high (18.5 cm. X 9.4 cm. X 6.1 cm.) W eight 11.5 oz. (325g) Material Case: P olycarbonate Color : Black Capacity Suppor ts up to four Li-Ion battery packs En vironmental Operating T emperature 32° to 104°F (0° to 40°C) Storage T emperature -4° to +140?[...]

  • Page 119

    1 4-1 14 Customer Suppor t T echnical Assistance If you need assistance installing or troubleshooting your device, please contact us by using one of the methods below: Knowledge Base: www.hsmknowledgebase.com Our Knowledge Base provides thousands of immediate solutions. If the Knowledge Base cannot help, our Technical Support Portal (see below) pro[...]

  • Page 120

    14 - 2 EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE LAW, THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER COVENANTS OR WARRANTIES, EITHER EXPRESSED OR IMPLIED, ORAL OR WRITTEN, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. HII’S RESPONSIBILITY AND PURCHASER’[...]

  • Page 121

    [...]

  • Page 122

    ™ Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.com 6110-UG Rev D 2/14[...]