Daewoo KOG-373R0S manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103

Aller à la page of

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Daewoo KOG-373R0S. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Daewoo KOG-373R0S ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Daewoo KOG-373R0S décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Daewoo KOG-373R0S devrait contenir:
- informations sur les caractéristiques techniques du dispositif Daewoo KOG-373R0S
- nom du fabricant et année de fabrication Daewoo KOG-373R0S
- instructions d'utilisation, de réglage et d’entretien de l'équipement Daewoo KOG-373R0S
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Daewoo KOG-373R0S ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Daewoo KOG-373R0S et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Daewoo en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Daewoo KOG-373R0S, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Daewoo KOG-373R0S, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Daewoo KOG-373R0S. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    Ser vice Manual Micr owave Oven Model : KOG-371G0S KOG-391G0S KOG-371H0S KOG-391H0S KOG-376T1S KOG-396T1S KOG-371R0S KOG-391R0S KOG-374R0S KOG-375R0S KOG-373R0S KOG-393R0S DAEWOO ELECTRONICS CO., L TD. ✔ Caution : In this Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the lates[...]

  • Page 2

    1 1 PRECAUTIONS T O BE OBSER VED BEFORE AND DURING SER VICING T O A VOID POSSIBLE EXPOSURE T O EXCESSIVE MICROW A VE ENERGY (a) Do not operate or allow the oven to be operated with the door open. (b) Make the following safety checks on all ovens to be serviced before activating the magnetron or other microwave source, and make repairs as necessary:[...]

  • Page 3

    2 SAFETY AND PRECAUTIONS 1. FOR SAFE OPERATION Damage that allows the microwave energy (that cooks or heats the food) to escape will result in poor cooking and may cause serious bodily injury to the operator. IF ANY OF THE FOLLOWING CONDITIONS EXIST, OPERATOR MUST NOT USE THE APPLIANCE. (Only a trained service personnel should make repairs.) 1) A b[...]

  • Page 4

    3 SPECIFICA TIONS - POWER SELECTIONS* : KOG-371R/391R0S : 5 LEVELS. MODEL KOG-371G/H/R0S, KOG-374R/5R0S KOG-391G/H/R0S POWER SUPPLY 230~, 50Hz SINGLE PHASE WITH EARTHING MICROWAVE 1200W 1350W POWER CONSUMPTION GRILL 1050W 1050W COMBINATION 2200W 2350W MICROWAVE ENERGY OUTPUT 800W 900W MICROWAVE FREQUENCY 2450 MHz OUTSIDE DIMENSIONS(WXHXD) 465X279X3[...]

  • Page 5

    4 1. OUTER DIMENSION 1) KOG-371G/H0S, KOG-391G/H0S 465/495 279/294 360/388 2) KOG-376T1S, KOG-396T1S 3) KOG-373R0S, KOG-393R0S 365/392 465/495 279/294 EXTERNAL VIEW[...]

  • Page 6

    5 4) KOG-371R0S, KOG-391R0S 465/495 279/294 360/388 5) KOG-374R0S 465 279 360 6) KOG-375R0S 465 279 360[...]

  • Page 7

    6 1. DOOR SEAL - Door seal maintains the microwave energy within the oven cavity and prevents microwave leakage. 2. REFLECTOR(Insulator Heater) 3. HEA TING ELEMENT 4. OVEN CA VITY 5. SEFETY INTERLOCK SYSTEM 6. DOOR RELEASE BUTT ON - By pushing this button the latch system cut of f all circuits and stops the oven before the door is opened. 7. MET AL[...]

  • Page 8

    7 1. DOOR SEAL - Door seal maintains the microwave energy within the oven cavity and prevents microwave leakage. 2. REFLECTOR(Insulator Heater) 3. HEA TING ELEMENT 4. OVEN CA VITY 5. SEFETY INTERLOCK SYSTEM 6. CONTROL P ANEL 7. MET AL RACK 8. COUPLER - This fits over the shaft in the center of the ovens cavity floor . This is to remain in the oven [...]

  • Page 9

    8 1. DOOR SEAL - Door seal maintains the microwave energy within the oven cavity and prevents microwave leakage. 2. REFLECTOR(Insulator Heater) 3. HEA TING ELEMENT 4. OVEN CA VITY 5. SEFETY INTERLOCK SYSTEM 6. CONTROL P ANEL 7. DOOR OPENING BUTT ON 8. MET AL RACK 9. COUPLER - This fits over the shaft in the center of the ovens cavity floor . This i[...]

  • Page 10

    9 1. DOOR SEAL - Door seal maintains the microwave energy within the oven cavity and prevents microwave leakage. 2. REFLECTOR(Insulator Heater) 3. HEA TING ELEMENT 4. OVEN CA VITY 5. SEFETY INTERLOCK SYSTEM 6. MET AL RACK 7. COUPLER - This fits over the shaft in the center of the ovens cavity floor . This is to remain in the oven for all cooking. 8[...]

  • Page 11

    10 1. DOOR SEAL - Door seal maintains the microwave energy within the oven cavity and prevents microwave leakage. 2. REFLECTOR(Insulator Heater) 3. HEA TING ELEMENT 4. OVEN CA VITY 5. SEFETY INTERLOCK SYSTEM 6. MET AL RACK 7. COUPLER - This fits over the shaft in the center of the ovens cavity floor . This is to remain in the oven for all cooking. [...]

  • Page 12

    11 1. DOOR SEAL - Door seal maintains the microwave energy within the oven cavity and prevents microwave leakage. 2. REFLECTOR(Insulator Heater) 3. HEA TING ELEMENT 4. OVEN CA VITY 5. SEFETY INTERLOCK SYSTEM 6. MET AL RACK 7. COUPLER - This fits over the shaft in the center of the ovens cavity floor . This is to remain in the oven for all cooking. [...]

  • Page 13

    12 1. TIME SET P AD - Used to set the cooking time and the present time. 2. DISPLA Y - Cooking time, power level, indicators and present time are displayed. 3. ONE TOUCH - Used to cook or reheat specific quantities of food. 4. AUT O COOK - Used to cook or reheat. 5. MORE - Used to add time to cooking. 6. LESS - Used to remove time from cooking. 7. [...]

  • Page 14

    13 1. TIME SET P AD - Used to set the cooking time and the present time. 2. DISPLA Y - Cooking time, power level, indicators and present time are displayed. 3. ONE TOUCH - Used to cook or reheat specific quantities of food. 4. MORE - Used to add time to cooking. 5. LESS - Used to remove time from cooking. 6. AUT O DEFROST - Used to defrost foods.(f[...]

  • Page 15

    14 1. Display - Cooking time, power level, indicators and present time are displayed. 2. Clock - Used to set clock. 3. Start/Easy Cook - Used to start operation, also for easy start (each press adds 30 seconds microwave cooking time). 4. Stop/Clear - Used to stop the operation or to delete the cooking data. 5. Auto Cook - Used to cook using a progr[...]

  • Page 16

    15 1. Display - Cooking time, power level, indicators and present time are displayed. 2. Grill/Combi - Used to cook GRILL or COMBI. 3. Power/Def - Used to set power level and DEFROST . 4. Auto cook - Used to cook using a program or to reheat. 5. Start / Easy cook - Used to start the oven operation and also increase the reheat time by 30 seconds. 6.[...]

  • Page 17

    16 1. Display - Cooking time, power level, indicators and present time are displayed. 2. Grill/Combi - Used to cook GRILL or COMBI. 3. Power/Def - Used to set power level and DEFROST . 4. Auto cook - Used to cook using a program or to reheat. 5. Start / Easy cook - Used to start the oven operation and also increase the reheat time by 30 seconds. 6.[...]

  • Page 18

    17 1. Display - Cooking time, power level, indicators and present time are displayed. 2. Grill/Combi - Used to cook GRILL or COMBI. 3. Power/Def - Used to set power level and DEFROST . 4. Auto cook - Used to cook using a program or to reheat. 5. Start / Easy cook - Used to start the oven operation and also increase the reheat time by 30 seconds. 6.[...]

  • Page 19

    18 1. Display - Cooking time, power level, indicators and present time are displayed. 2. Grill/Combi - Used to cook grill/combi. 3. Power/Def - Used to set power level. Used to defrost foods by weight or time. 4. Auto cook - Used to cook using a program or to reheat. 5. Start / Easy cook - Used to start the oven operation and also increase the rehe[...]

  • Page 20

    19 INST ALLA TION 1. Steady, flat location This microwave oven should be set on a steady, flat surface. This microwave oven is designed for counter top use only. 2. Leave space behind and side All air vents should be kept a clearance. If all vents are covered during operation, the oven may overheat and, eventually, cause failure. 3. Away from radio[...]

  • Page 21

    20 1. Connect the main lead to an electrical outlet. 2. After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass tray must always be in place during cooking. 3. Close the door securely. 4. When the oven door is opened, the light turns off. 5. The oven door can be opened at any time during operation [...]

  • Page 22

    21 DISASSEMBL Y AND ASSEMBL Y Cautions to be observed when trouble shooting Unlike many other appliances, the microwave oven is a high-voltage, high-current equipment. It is completely safety during normal operation. However, carelessness in servicing the oven can result in an electric shock or possible danger from a short circuit. You are asked to[...]

  • Page 23

    22 DISASSEMBL Y AND ASSEMBL Y 1. To remove cabinet. 1) Remove three screws on cabinet back. 2) Push the cabinet backward. 2. To remove door assembly. 1) Remove a screw which secure the stopper hinge top. 2) Remove the door assembly from top plate of cavity. 3) Reverse the above for reassembly. NOTE : After replacing the door assembly, perform a che[...]

  • Page 24

    23 3. To remove door parts. (1) KOG-371G0S/371H0S/371R0S (2) KOG-391G0S/391H0S/391R0S REF. NO PART CODE PART NAME DESCRIPTION QTY REMARK A01 3512204100 FRAME DOOR ABS XR-401 H-2938 1 A02 3517003150 BARRIER-SCREEN*0 ACRYL 1 A03 3515304410 SUPPORTER BARR-S*0 PP 1 A04 3515204100 STOPPER HINGE *T AS KOR-63150S 1 A05 3511705620 DOOR WELD AS KOR-81250S 1[...]

  • Page 25

    24 1) Remove the gasket door from door plate. 2) Remove the barrier screen inner from door plate. 3) Remove the door frame from door plate. 4) Remove the stopper hinge top from door plate. 5) Remove the spring and the hook. 6) Remove the supporter barrier screen outer from door frame. 7) Remove the barrier screen outer from door frame. 8) Remove th[...]

  • Page 26

    25 (3) KOG-376T1S (4) KOG-396T1S REF. NO PART CODE PART NAME DESCRIPTION QTY REMARK A01 3512203830 FRAME DOOR ABS 1 A02 3517005610 BARRIER-SCREEN*0 PMMA 1.5t 1 A03 3515306500 SUPPORTER BARR-S*0 ABS 1 A04 3511603800 DECORATOR DOOR ABS 1 A05 3511706100 DOOR PAINTING AS KOR-61150S 1 A06 3517002800 BARRIER-SCREEN *I KOR-61150S PE 0.1t 1 A07 3515204110 [...]

  • Page 27

    26 1) Remove the gasket door from door plate. 2) Remove a screw which secure the door plate and door frame. 3) Remove the door frame from door plate. 4) Remove the stopper hinge top from door plate. 5) Remove the spring and the hook. 6) Remove the supporter barrier screen outer from door frame. 7) Remove the barrier screen outer from door frame. 8)[...]

  • Page 28

    27 REF NO. PART CODE PART NAME DESCRIPTION Q’TY REMARK A01 3512203850 FRAME DOOR ABS XR-401, H-2938 1 A02 3517005620 BARRIER-SCREEN*O TEMP GLASS T3.2 1 A03 3515204100 STOPPER HINGE*T AS KOR-63150S 1 A04 3511706120 DOOR PAINTING AS KOR-634R0S 1 A05 3517002800 BARRIER-SCREEN*I PE 0.1T 1 A06 3512300200 GASKET DOOR PP 1 A07 3513100730 HOOK POM BLACK [...]

  • Page 29

    28 4. Method to reduce the gap between the door seal and the oven front surface. (1) To reduce gap located on part ‘A’ • Loosen two screws on stopper hinge top, and then push the door to contact the door seal to oven front surface. • Tighten two screws. (2) To reduce gap located on part ‘B’ • Loosen two screws on stopper hinge under, [...]

  • Page 30

    29 REF NO. PART CODE PART NAME DESCRIPTION Q’TY REMARK A01 3512203850 FRAME DOOR ABS XR-401, H-2938 1 A02 3517005620 BARRIER-SCREEN*O TEMP GLASS T3.2 1 A03 3515204100 STOPPER HINGE*T AS KOR-63150S 1 A04 3511706120 DOOR PAINTING AS KOR-634R0S 1 A05 3517002800 BARRIER-SCREEN*I PE 0.1T 1 A06 3512300200 GASKET DOOR PP 1 A07 3513100730 HOOK POM BLACK [...]

  • Page 31

    30 4. Method to reduce the gap between the door seal and the oven front surface. (1) To reduce gap located on part ‘A’ • Loosen two screws on stopper hinge top, and then push the door to contact the door seal to oven front surface. • Tighten two screws. (2) To reduce gap located on part ‘B’ • Loosen two screws on stopper hinge under, [...]

  • Page 32

    31 (7) KOG-373R0S (8) KOG-393R0S REF. NO PART CODE PART NAME DESCRIPTION QTY REMARK A01 3512203860 FRAME DOOR ABS SG-175 1 A02 3517005630 BARRIER-SCREEN*0 SAN 1 A03 3515204100 SUPPER HINGE*T AS KOR-63150S 1 A04 3511705500 DOOR WELD AS KOR-61150S 1 A05 3517002800 BARRIER-SCREEN*I POLYESTER T0.1 1 A06 3512300200 GASKET DOOR PP 1 A07 3513100700 HOOK P[...]

  • Page 33

    32 1) Remove the gasket door from door plate. 2) Remove the barrier screen inner from door plate. 3) Remove the door frame from door plate. 4) Remove the stopper hinge top from door plate. 5) Remove the spring and the hook. 6) Remove the supporter barrier screen outer from door frame. 7) Remove the barrier screen outer from door frame. 8) Remove th[...]

  • Page 34

    33 (1) KOG-371G0S/371H0S REF. NO PART CODE PART NAME DESCRIPTION QTY REMARK B01 3518521610 SWITCH MEMBRANE KOG-371G0S 1 3518521600 KOG-371H0S B02 3516719400 CONTROL-PANEL ABS XR-401 H-2938 1 B03 3514320800 PCB MAIN AS KOG-371G0S 1 B04 7122401211 SCREW TAPPING T2S TRS 4X12 MFZN 3 B05 3513702700 LEVER DOOR OPEN ABS XR-401 H-2938 1 B06 441G430171 SPRI[...]

  • Page 35

    34 34 1) Remove the screw which secure the control panel, push up two snap fits and draw forward the control panel assembly. 2) Remove the door open lever from the control panel. 3) Remove four screws which secure the PCB assembly to control panel. 4) Disconnect membrane tail from the connector of the PCB assembly. 5) Detach membrane from the contr[...]

  • Page 36

    35 1) Remove the screw which secure the control panel, push up two snap fits and draw forward the control panel assembly. 2) Remove the door open lever from the control panel. 3) Remove four screws which secure the PCB assembly to control panel. 4) Disconnect membrane tail from the connector of the PCB assembly. 5) Detach membrane from the control [...]

  • Page 37

    36 REF NO. PART CODE PART NAME DESCRIPTION Q’TY REMARK B01 3513404620 KNOB VOLUME ABS XR-401, H-2938 1 B02 3511604510 DECORATOR C-PANEL STS T0.6 1 B03 3516003910 SPECIAL DOUBLE TAPE H0 SUNG 550M T0.15 1 B04 3515501530 WINDOW DISPLAY PMMA T2.0 1 B05 3516721460 CONTROL PANEL ABS XR-401, H-2938 1 B06 3516907430 BUTTON FUNCTION ABS XR-401, COATING 1 [...]

  • Page 38

    37 REF NO. PART CODE PART NAME DESCRIPTION Q’TY REMARK B01 3513403800 KNOB VOLUME ABS XR-401, H-2938 1 B02 3511604530 DECORATOR C-PANEL STS T0.6 1 B03 3516003960 SPECIAL DOUBLE TAPE H0 SUNG 550M T0.15 1 B04 3515501530 WINDOW DISPLAY PMMA T2.0 1 B05 3516723700 CONTROL PANEL ABS XR-401, H-2938 1 B06 3516907440 BUTTON FUNCTION ABS XR-401 1 B07 PKBPM[...]

  • Page 39

    38 (9) KOG-373R0S (10) KOG-393R0S REF. NO PART CODE PART NAME DESCRIPTION QTY REMARK B01 3515501540 WINDOW DISPLAY PMMA 1 B02 3516723730 CONTROL PANEL ABS SG-175 1 B03 3516907530 BUTTON FUCTION *A ABS SG-175 1 B04 3516907540 BUTTON FUCTION *B ABS SG-175 1 B05 3513405240 KNOB VOLUME ABS 1 B06 PKBPMSZ300 PCB SUB AS KOG-373R0S 1 B07 7621301011 SCREW T[...]

  • Page 40

    39 1) Remove the screw which secure the control panel, push up two snap fits and draw forward the control panel assembly. 2) Remove the door open lever from the control panel. 3) Remove four screws which secure the PCB assembly to control panel. 4) Disconnect membrane tail from the connector of the PCB assembly. 5) Detach membrane from the control [...]

  • Page 41

    40 40 8. To remove wind guide assembly. 1) Remove a screw for earthing. 2) Remove the noise filter from the wind guide. 3) Remove a screw which secure the wind guide assembly. 4) Draw forward the wind guide assembly. 5) Pull the fan from the motor shaft. 6) Remove two screws which secure the motor shaded pole. 7) Remove the motor shaded pole. 8) Re[...]

  • Page 42

    41 10. To remove tray motor. (1) Remove the coupler in the cavity. (2) Turn the set upside down. (3) Cut the tray motor cover part from the base plate. (4) Remove the tray motor cover. (5) Remove a screw which secure the tray motor. (6) Remove the tray motor. (7) Reverse the above steps for reassembly except for securing the tray motor cover with s[...]

  • Page 43

    42 REF. NO PART CODE PART NAME DESCRIPTION QTY REMARK C01 7392500008 NUT HEX 6N-2-5 SUS 1 C02 3515000600 SPACER INSULATOR *I C377BD 2 C03 3513301100 INSULATOR HEATER SPP T0.8 1 C04 3512803400 HEATER 230V 1000W 1R67994001 1 C05 7002500613 SCREW MACHINE TRS 5X6 MFCR 1 C06 7002400413 SCREW MACHINE TRS 4X4 MFCR 2 12. To remove heater parts. ✔ Caution[...]

  • Page 44

    43 INTERLOCK MECHANISM AND ADJUSTMENT The door lock mechanism is a device which has been specially designed to completely eliminate microwave radiation when the door is opened during operation, and thus to perfectly prevent the danger resulting from the leakage of microwave. (1) Primary interlock switch When the door is closed, the hook locks the o[...]

  • Page 45

    44 INTERLOCK MECHANISM AND ADJUSTMENT The door lock mechanism is a device which has been specially designed to completely eliminate microwave radiation when the door is opened during operation, and thus to perfectly prevent the danger resulting from the leakage of microwave. 1) KOG-374R/375R0S (1) Primary interlock switch When the door is closed, t[...]

  • Page 46

    45 45 Following the procedure below to check if the oven is defective or not. 1) Check earthing before trouble checking. 2) Be careful of the high voltage circuit. 3) Discharge the high voltage capacitor. 4) When checking the continuity of the switches, fuse or high voltage tranformer, disconnect one load wire from these parts and check continuity [...]

  • Page 47

    46 TROUBLE SHOOTING GUIDE CONDITION CHECK Check continuity of magnetron Defective magnetron RESULT No Continuity CAUSE REMEDY Replace Outlet has proper voltage Fuse does not blow. CONDITION CHECK Check continuity of primary interlock switch Malfunction of primary interlock switch RESULT No Continuity CAUSE REMEDY Adjust or replace Turn table motor [...]

  • Page 48

    47 CONDITION CHECK Check continuity of high voltage fuse RESULT No Continuity Check continuity if high voltage capacitor terminals with wires removed Replace high voltage fuse Continuity CAUSE Defective high voltage transformer REMEDY Replace No microwave oscillation Check continuity of high voltage rectifier in forward and backward direction with [...]

  • Page 49

    48 (TROUBLE 4) The following visual conditions inditions indicate a probable defective touch control circuit or membrane switch assembly 1. Incomplete segments, 1) Segments missing. 2) Partical segments missing. 3) Digit flickering other than normal display slight flickering. 4) " :0" does not display when power is on. 2. A distinct chang[...]

  • Page 50

    49 1. MEASUREMENT OF THE MICROW A VE POWER OUTPUT Microwave output power can be checked by indirectly mmeasuring the temperature rise of a certain amount of water exposed to the microwave as directed below. PROCEDURE 1. Microwave power output measurement is made with the microwave oven supplied at rated voltage and operated at its maximum microwave[...]

  • Page 51

    50 2. MICROW A VE RADIA TION TEST PROCEDURE 1. Prepare Microwave Energy Survey Meter, 600cc glass beaker, and glass thermometer 100° C (212°F). 2. Pour 275cc ± 15cc of tap water initially at 20 ± 5°C (68 ± 9° F) in the 600 cc glass beaker with an inside diameter of approx. 95 mm(3.5 in.). 3. Place it at the center of the tray and set it in a[...]

  • Page 52

    51 3. COMPONENT TEST PROCEDURE • High voltage is present at the high voltage terminal of the high voltage transformer during any cooking cycle. • It is neither necessary nor advisable to attempt measurement of the high voltage. • Before touching any oven components or wiring, always unplug the oven from its power source and discharge the capa[...]

  • Page 53

    52 WIRING DIAGRAM (1) KOG-371G/H/R0S, KOG-391G/H/R0S, KOG-376T1S, KOG-374R/375R0S, KOG-373R/393R0S[...]

  • Page 54

    53 (2) KOG-396T1S[...]

  • Page 55

    54 1. CIRCUIT CHECK PROCEDURE 1. Low voltage transformer check The low voltage transformer is located on the P.C.B. Measuring condition: Input voltage: 230V / Frequency: 50Hz 2. Voltage Check - Key check point - Check method NOTE 1. Refer to Ciruit Diagram (point 4). 2. Secondary side voltage of the low voltage transformer changes in proportion to [...]

  • Page 56

    55 Mesurement point[...]

  • Page 57

    56 3. When there is no microwave oscillation 1) When touching START pad, oven lamp does not turn on. Fan motor do not rotate, but cook indicator in display comes on. ✻ Cause : RELAY 2 does not operate. → refer to Circuit Diagram (point 3) - Check method 2) When touching START pad, oven lamp turns on. Fan motor and turntable rotate and cook indi[...]

  • Page 58

    57 2. P .C.B. CIRCUIT DIAGRAM[...]

  • Page 59

    58 NO NAME SYMBOL SPECIFICATION PART CODE Q’TY 1 BUZZER BZ1 BM-20K 3515600100 1 2 C ARRAY CA1 7P(6) 102 M 50V CN6XB-102M 1 3 CAPACITOR ELEC EC1 50V RS 1µF CEXE1H109A 1 4 CPAPCITOR ELEC EC2 25V RSS 1000µF CEXF1E102V 1 5 CONNECTOR WAFER CN1 YW396-02AV 3519150520 1 6 CONNECTOR FILM CN2 FCZ254-11 441M367160 1 7 CONNECTOR WAFER CN3 YW396-05AV 351915[...]

  • Page 60

    59 NO NAME SYMBOL SPECIFICATION PART CODE Q’TY 1 BUZZER BZ1 BM-20K 3515600100 1 2 C ARRAY CA1 7P(6) 102 M 50V CN6XB-102M 1 3 CAPACITOR ELEC EC1 50V RS 1µF CEXE1H109A 1 4 CPAPCITOR ELEC EC2 25V RSS 1000µF CEXF1E102V 1 5 CONNECTOR WAFER CN1 YW396-02AV 3519150520 1 6 CONNECTOR FILM CN2 FCZ254-11 441M367160 1 7 CONNECTOR WAFER CN3 YW396-05AV 351915[...]

  • Page 61

    60 1. CIRCUIT CHECK PROCEDURE 1. Low voltage transformer check The low voltage transformer is located on the P.C.B. Measuring condition : Input voltage : 230V/Frequency : 50Hz 2. Voltage Check - Key check point - Check method NOTE 1. Refer to Circuit Diagram (point 4). 2. Secondary side voltage of the low voltage trasformer changes in proportion to[...]

  • Page 62

    61 Mesurement point[...]

  • Page 63

    62 3. When there is no microwave oscillation 1) When touching START pad, oven lamp does not turn on. Fan motor do not rotate, but cook indicator in display comes on. ✻ Cause : RELAY 2 does not operate. → refer to Circuit Diagram (point 3) - Check method 2) When touching START pad, oven lamp turns on. Fan motor and turntable rotate and cook indi[...]

  • Page 64

    63 2. P .C.B. CIRCUIT DIAGRAM[...]

  • Page 65

    64 3. P.C.B. LOCATION NO (1) KOG-376T1S NO NAME SYMBOL SPECIFICATION PART CODE Q’TY REMARK 1 BUZZER BZ1 BM-20K 3615600100 1 MAIN 2 C ARRAY CA1 5P(6) 102 M 50V CN4XB-102M 1 “ 3 CAPACITOR ELEC EC1, 2 50V RSS 10 µF CEXE1H100A 2 “ 4 CAPACITOR ELEC EC3 50V RSS 470 µF CEXE1H471V 1 “ 5 CONNECTOR WAFER CN1 YW396-02AV 3519150520 1 “ 6 CONNECTOR [...]

  • Page 66

    65 (2) KOG-396T1S NO NAME SYMBOL SPECIFICATION PART CODE Q’TY REMARK 1 BUZZER BZ1 BM-20K 3615600100 1 MAIN 2 C ARRAY CA1 5P(6) 102 M 50V CN4XB-102M 1 “ 3 CAPACITOR ELEC EC1, 2 50V RSS 10 µF CEXE1H100A 2 “ 4 CAPACITOR ELEC EC3 50V RSS 470 µF CEXE1H471V 1 “ 5 CONNECTOR WAFER CN1 YW396-02AV 3519150520 1 “ 6 CONNECTOR WAFER CN2 HLEM15S-1 4C[...]

  • Page 67

    66 1. CIRCUIT CHECK PROCEDURE 1. Low voltage transformer check The low voltage transformer is located on the P.C.B. Measuring condition: Input voltage: 230V / Frequency: 50Hz 2. Voltage Check - Key check point - Check method NOTE 1. Refer to Ciruit Diagram (point 4). 2. Secondary side voltage of the low voltage transformer changes in proportion to [...]

  • Page 68

    67 Mesurement point[...]

  • Page 69

    68 3. When there is no microwave oscillation 1) When touching START pad, oven lamp does not turn on. Fan motor do not rotate, but cook indicator in display comes on. ✻ Cause : RELAY 2 does not operate. → refer to Circuit Diagram (point 3) - Check method 2) When touching START pad, oven lamp turns on. Fan motor and turntable rotate and cook indi[...]

  • Page 70

    69 2. P .C.B. CIRCUIT DIAGRAM[...]

  • Page 71

    70 NO NAME SYMBOL SPECIFICATION PART CODE Q’TY REMARK 1 PCB MAIN M160 82X139.9 3514321100 1 MAIN PCB 2 BUZZER BZ1 BM-20K 3515600100 1 3 C ARRAY CA1 5P(4) 102 M 50V CN4XB-102M 1 4 C ELECTRO EC1 16V RSS 100µF CEXF1C101V 1 5 C ELECTRO EC2 25V RSS 1000µF CEXF1E102V 1 6 CONNECTOR WAFER CN1 YW396-02AV 3519150520 1 7 CONNECTOR WAFER CN3 YW396-05AV 351[...]

  • Page 72

    71 (2) KOG-391R0S NO NAME SYMBOL SPECIFICATION PART CODE Q’TY REMARK 1 PCB MAIN M160 82X139.9 3514321100 1 MAIN PCB 2 BUZZER BZ1 BM-20K 3515600100 1 3 C ARRAY CA1 5P(4) 102 M 50V CN4XB-102M 1 4 C ELECTRO EC1 16V RSS 100µF CEXF1C101V 1 5 C ELECTRO EC2 25V RSS 1000µF CEXF1E102V 1 6 CONNECTOR WAFER CN1 YW396-02AV 3519150520 1 7 CONNECTOR WAFER CN3[...]

  • Page 73

    72 PRINTED CIRCUIT BOARD <KOG-374R0S, KOG-375R0S> 1. CIRCUIT CHECK PROCEDURE 1. Low V oltage Transformer check • The low voltage transformer is located on the P.C.B. • Measuring condition: input voltage : 230V/Frequency : 50Hz 2. V oltage check • Key check point • Check method NO CHECK POINT REMARK 1 IC 1 PIN 2, 21, 30, 34 –5 VDC 2 [...]

  • Page 74

    73 Mesurement point[...]

  • Page 75

    74 3. When there is no microwave oscillation 1) When touching START pad, oven lamp does not turn on. Fan motor do not rotate, but cook indicator in display comes on. ✻ Cause : RELAY 2 does not operate. → refer to Circuit Diagram (point 3) - Check method 2) When touching START pad, oven lamp turns on. Fan motor and turntable rotate and cook indi[...]

  • Page 76

    75 2. P .C.B. CIRCUIT DIAGRAM[...]

  • Page 77

    76 NAME NAME SYMBOL SPECIFICATION PART CODE Q'TY REMARK 1 PCB MAIN M166 82 X 146.8 3514321140 1 MAIN PCB 2 BUZZER BZ1 BM-20K 3515600100 1 3 C ARRAY CA1 5P(4) 1000PF M 50V CN4XB-102M 1 4 CAPACITOR CERA C6 102 50V Z AXIAL CCZB1H102K 1 5 CAPACITOR CERA C1~5, C7 104 50V Z AXIAL CCZF1H104Z 6 6 CAPACITOR ELEC EC1 16V RSS 100MF CEXF1C101V 1 7 CAPACIT[...]

  • Page 78

    77 PRINTED CIRCUIT BOARD <KOG-373R0S, KOG-393R0S> 1. CIRCUIT CHECK PROCEDURE 1. Low V oltage Transformer check • The low voltage transformer is located on the P.C.B. • Measuring condition: input voltage : 230V/Frequency : 50Hz 2. V oltage check • Key check point • Check method NO CHECK POINT REMARK 1 IC 1 PIN 2, 21, 30, 34 –5 VDC 2 [...]

  • Page 79

    78 Mesurement point[...]

  • Page 80

    79 3. When there is no microwave oscillation 1) When touching START pad, oven lamp does not turn on. Fan motor do not rotate, but cook indicator in display comes on. ✻ Cause : RELAY 2 does not operate. → refer to Circuit Diagram (point 3) - Check method 2) When touching START pad, oven lamp turns on. Fan motor and turntable rotate and cook indi[...]

  • Page 81

    80 2. P .C.B. CIRCUIT DIAGRAM[...]

  • Page 82

    81 NAME NAME SYMBOL SPECIFICATION PART CODE Q'TY REMARK 1 PCB MAIN M169 90 X 197 3514321150 1 MAIN PCB 2 BUZZER BZ1 BM-20K 3515600100 1 3 C ARRAY CA1 5P(4) 1000PF M 50V CN4XB-102M 1 4 CAPACITOR CERA C4 102 50V Z AXIAL CCZB1H102K 1 5 CAPACITOR CERA C1~C3, C5~C7 104 50V Z AXIAL CCZF1H104Z 6 6 CAPACITOR ELEC EC1 16V RSS 100MF CEXF1C101V 1 7 CAPAC[...]

  • Page 83

    82 NAME NAME SYMBOL SPECIFICATION PART CODE Q'TY REMARK 1 PCB MAIN M169 90 X 197 3514321150 1 MAIN PCB 2 BUZZER BZ1 BM-20K 3515600100 1 3 C ARRAY CA1 5P(4) 1000PF M 50V CN4XB-102M 1 4 CAPACITOR CERA C4 102 50V Z AXIAL CCZB1H102K 1 5 CAPACITOR CERA C1~C3, C5~C7 104 50V Z AXIAL CCZF1H104Z 6 6 CAPACITOR ELEC EC1 16V RSS 100MF CEXF1C101V 1 7 CAPAC[...]

  • Page 84

    83 1. DOOR ASSEMBL Y Refer to Disassembly and assembly 2. CONTROL P ANEL ASSEMBL Y Refer to Disassembly and assembly 3. T OT AL ASSEMBL Y EXPLODED VIEW AND P ARTS LIST < KOG-371G/H/R0S, KOG-391G/H/R0S>[...]

  • Page 85

    84 REF NO PART CODE PART NAME DESCRIPTION Q'TY A00 3511710300 DOOR AS KOG-63150S 1 B00 3516721610 CONTROL PANEL AS KOG-371G0S 1 3516721600 CONTROL PANEL AS KOG-371H0S 1 B01 3516721630 CONTRON PANEL AS KOG-371R0S 1 F01 3510801310 CABINET SECC 1 F02 7112401011 SPECIAL SCREW T1 TRS 4X10 MFZN 3 F03 3516109610 CAVITY AS CAVITY AS 1 F04 7392500008 N[...]

  • Page 86

    85 REF NO PART CODE PART NAME DESCRIPTION Q'TY F33 3512100900 FOOT PP DASF-130 2 F34 7S422X4081 SPECIAL SCREW TT2 TRS 4X8 MFZN 1 F35 3515201101 STOPPER HINGE *U SCP-1 1 F36 4415A17352 SW MICRO VP-533A-OF SPNO #187 200G 1 F37 4415A66910 SW MICRO VP-531A-OF/SZM-V16-FA-61 1 F38 4415A17352 SW MICRO VP-533A-OF SPNO #187 200G 2 F39 3513702600 LEVER [...]

  • Page 87

    86 REF NO PART CODE PART NAME DESCRIPTION Q'TY A00 3511710700 DOOR AS KOR-86150S 1 B00 3516721700 CONTROL PANEL AS KOG-391G0S 1 3516721710 CONTROL PANEL AS KOG-391H0S 1 B01 3516721730 CONTROL PANEL AS KOG-391R0S 1 F01 3510801400 CABINET SECC 1 F02 7112401011 SPECIAL SCREW T1 TRS 4X10 MFZN 3 F03 351609910 CAVITY AS CAVITY AS 1 F04 7392500008 NU[...]

  • Page 88

    87 REF NO PART CODE PART NAME DESCRIPTION Q'TY F33 3512100900 FOOT PP DASF-130 2 F34 7S422X4081 SPECIAL SCREW TT2 TRS 4X8 MFZN 1 F35 3515201101 STOPPER HINGE *U SCP-1 1 F36 4415A17352 SW MICRO VP-533A-OF SPNO #187 200G 1 F37 4415A66910 SW MICRO VP-531A-OF/SZM-V16-FA-61 1 F38 4415A17352 SW MICRO VP-533A-OF SPNO #187 200G 2 F39 3513702600 LEVER [...]

  • Page 89

    88 1. DOOR ASSEMBL Y Refer to Disassembly and assembly 2. CONTROL P ANEL ASSEMBL Y Refer to Disassembly and assembly 3. T OT AL ASSEMBL Y (1) KOG-376T1S EXPLODED VIEW AND P ARTS LIST < KOG-376T1S, KOG-396T1S>[...]

  • Page 90

    89 REF NO PART CODE PART NAME DESCRIPTION Q'TY A00 3511710380 DOOR AS KOR-636T1S 1 B00 3516721620 CONTROL-PANEL AS KOG-376T1S 1 C00 3513302700 INSULTOR HEATER AS KOG-37150S 1 F01 3510801310 CABINET SECC 1 F02 7112401011 SPECIAL SCREW T1 TRS 4X10 MFZN 3 F03 3516109610 CAVITY AS CAVITY AS 1 F04 7392500008 NUT HEX 6N-2-5 2 F05 7122401211 SCREW TA[...]

  • Page 91

    90 REF NO PART CODE PART NAME DESCRIPTION Q'TY F35 4415A17352 SW MICRO VP-533A-OF SPNO #187 200G 1 F36 4415A66910 SW MICRO VP-531A-OF/SZM-V16-FA-61 1 F37 4415A17352 SW MICRO VP-533A-OF SPNO #187 200G 1 F38 4415A17352 SW MICRO VP-533A-OF SPNO #187 200G 1 F39 3513702610 LEVER LOCK POM 1 F40 3513811710 LOCK POM 1 F41 3513601600 LAMP BL 240V 25W T[...]

  • Page 92

    91 (2) KOG-396T1S (2) KOG-396T1S[...]

  • Page 93

    92 NO. PART CODE PART NAME DESCRIPTION SUPPLY REMARK A00 DOOR AS O B00 CONTROL-PANEL AS O C00 INSULATOR HEATER AS O F01 3510801310 CABINET SECC O F02 7112401011 SPECIAL SCREW T1 TRS 4X10 MFZN O F03 3516109910 CAVITY AS KOG-37150S O F04 7392500008 NUT HEX 6N-2-5 O F05 7122401211 SCREW TAPPING T2S TRS 4X12 MFZN O F06 3518904500 THERMOSTAT OFF:100 ON:[...]

  • Page 94

    93 1. DOOR ASSEMBL Y Refer to Disassembly and assembly 2. CONTROL P ANEL ASSEMBL Y Refer to Disassembly and assembly 3. T OT AL ASSEMBL Y (1) KOG-374R0S EXPLODED VIEW AND P ARTS LIST < KOG-374R0S>[...]

  • Page 95

    94 NO. PART CODE PART NAME DESCRIPTION SUPPLY REMARK A00 DOOR AS O B00 CONTROL-PANEL AS O C00 INSULATOR HEATER AS O F01 3510801310 CABINET SECC O F02 7112401011 SPECIAL SCREW T1 TRS 4X10 MFZN O F03 3516109610 CAVITY AS KOG-37150S O F04 7392500008 NUT HEX 6N-2-5 O F05 7122401211 SCREW TAPPING T2S TRS 4X12 MFZN O F06 3518904500 THERMOSTAT OFF:100 ON:[...]

  • Page 96

    95 1. DOOR ASSEMBL Y Refer to Disassembly and assembly 2. CONTROL P ANEL ASSEMBL Y Refer to Disassembly and assembly 3. T OT AL ASSEMBL Y (1) KOG-375R0S EXPLODED VIEW AND P ARTS LIST < KOG-375R0S>[...]

  • Page 97

    96 NO. PART CODE PART NAME DESCRIPTION SUPPLY REMARK A00 DOOR AS O B00 CONTROL-PANEL AS O C00 INSULATOR HEATER AS O F01 3510801310 CABINET SECC O F02 7112401011 SPECIAL SCREW T1 TRS 4X10 MFZN O F03 3516109610 CAVITY AS KOG-37150S O F04 7392500008 NUT HEX 6N-2-5 O F05 7122401211 SCREW TAPPING T2S TRS 4X12 MFZN O F06 3518904500 THERMOSTAT OFF:100 ON:[...]

  • Page 98

    97 1. DOOR ASSEMBL Y Refer to Disassembly and assembly 2. CONTROL P ANEL ASSEMBL Y Refer to Disassembly and assembly 3. T OT AL ASSEMBL Y EXPLODED VIEW AND P ARTS LIST < KOG-373R0S, KOG-393R0S>[...]

  • Page 99

    98 REF NO PART CODE PART NAME DESCRIPTION Q'TY A00 3511712170 DOOR AS KOG-63350S 1 B00 PKCPSWZ600 CONTROL PANEL AS KOG-373R0S 1 C00 3513302700 HEATER AS KOG-37150S 1 F01 3510801310 CABINET SECC 1 F02 7112401011 SCREW TAPPING T1 TRS 4X10 MFZN 3 F03 3516109610 CAVITY AS CAVITY AS 1 F04 7392500008 NUT HEX 6N-2-5 2 F05 7122401211 SCREW TAPPING T2S[...]

  • Page 100

    99 REF NO PART CODE PART NAME DESCRIPTION Q'TY F33 3512100900 FOOT PP DASF-130 2 F34 7S422X4081 SPECIAL SCREW TT2 TRS 4X8 MFZN 1 F35 3515201101 STOPPER HINGE *U SCP-1 1 F36 4415A17352 SW MICRO VP-533A-OF SPNO #187 200G 1 F37 4415A66910 SW MICRO VP-531A-OF/SZM-V16-FA-61 1 F38 4415A17352 SW MICRO VP-533A-OF SPNO #187 200G 2 F39 3513702610 LEVER [...]

  • Page 101

    100 REF NO PART CODE PART NAME DESCRIPTION Q'TY A00 3511712720 DOOR AS KOR-86350S 1 B00 PKCPSWT500 CONTROL PANEL AS KOG-393R0S 1 3516721710 CONTROL PANEL AS KOG-391H0S 1 C00 3513302700 HEATER AS KOG-37150S 1 F01 3510801400 CABINET SECC 1 F02 7112401011 SCREW TAPPING T1 TRS 4X10 MFZN 3 F03 3516109910 CAVITY AS CAVITY AS 1 F04 7392500008 NUT HEX[...]

  • Page 102

    101 REF NO PART CODE PART NAME DESCRIPTION Q'TY F33 3512100900 FOOT PP DASF-130 2 F34 7S422X4081 SPECIAL SCREW TT2 TRS 4X8 MFZN 1 F35 3515201101 STOPPER HINGE *U SCP-1 1 F36 4415A17352 SW MICRO VP-533A-OF SPNO #187 200G 1 F37 4415A66910 SW MICRO VP-531A-OF/SZM-V16-FA-61 1 F38 4415A17352 SW MICRO VP-533A-OF SPNO #187 200G 2 F39 3513702610 LEVER[...]

  • Page 103

    DAEWOO ELECTRONICS CO., L TD. 686, AHYEON-DONG MAPO-GU SEOUL, KOREA C.P.O. BOX 8003 SEOUL, KOREA TELEX: DWELEC K28177-8 CABLE: “DAEWOOELEC” E-MAIL : G7F00E@web.dwe.co.kr FAX: 02) 360-8184 TEL: 02) 360-8179~8180 PRINTED DA TE: Dec. 1999[...]