Cisco Systems ONS 15454 manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66

Aller à la page of

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Cisco Systems ONS 15454. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Cisco Systems ONS 15454 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Cisco Systems ONS 15454 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Cisco Systems ONS 15454 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Cisco Systems ONS 15454
- nom du fabricant et année de fabrication Cisco Systems ONS 15454
- instructions d'utilisation, de réglage et d’entretien de l'équipement Cisco Systems ONS 15454
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Cisco Systems ONS 15454 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Cisco Systems ONS 15454 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Cisco Systems en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Cisco Systems ONS 15454, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Cisco Systems ONS 15454, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Cisco Systems ONS 15454. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    CH A P T E R 22-1 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 22 DLPs A500 to A599 Note The terms "Unidirectional Path Swit ched Ring" and "UPSR" may appear in Cisco lit erature. These t erms do not refer to using Cisco ONS 15xxx products in a unidirectio nal path switched ring conf iguratio n. Rather , these terms, as w[...]

  • Page 2

    22-2 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A507 View OC-N PM Parameters Figur e 22-1 Viewing OC-N Car d P erf or mance Monitor i ng Inf or mation Step 3 In the Port drop-do wn list, cl ick the port you w ant to monitor . Step 4 Click Refr esh . Step 5 V iew the PM parameter names that appear in the P [...]

  • Page 3

    22-3 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A509 Provision CE-1000-4 Ethernet Ports DLP-A509 Provision CE-1000-4 Ethernet Ports Note Y ou can provision SONET contiguous concatenated (CCA T) or virtual concatenat ed ( VCA T) circuits for the CE-1000-4 before or after provisioning the car d’ s Ethernet[...]

  • Page 4

    22-4 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A510 Provision a DS-3 Cir cuit Source and Destination DLP-A510 Provision a DS-3 Circuit Source and Destination Note After you hav e sele cted the circuit propert ies in the Circuit Source dialog box acco rding to the specif ic circuit creation procedure, you [...]

  • Page 5

    22-5 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A512 Change Node Acce ss and PM Clearing Privilege DLP-A512 Change Node Access and PM Clearing Privilege Step 1 In node vie w , click the Pr ovisioning > Security > Access tabs. Step 2 In the Access area, prov ision the follo wing: • LAN access—Choo[...]

  • Page 6

    22-6 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A513 Provision CE-100T-8 Ethernet Ports In the TCC CORB A (IIOP/SSLIOP) Listener Po rt area, choose a listener port option: • Default - TCC Fixed —Uses Port 57790 to connect to ONS 15454 s on the same side of the f ire wall or if no f ire wall is used ( d[...]

  • Page 7

    22-7 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A513 Provision CE-100T-8 Ethernet Ports • Enable Flo w Control—Click th is check box to enable flo w co ntrol on the port (d efault). If you do not want to enable flo w control, uncheck th e box. The CE-100T -8 attempts to negot iate symmetrical flo w con[...]

  • Page 8

    22-8 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A514 Provision CE-100T-8 and CE-1000-4 POS Ports DLP-A514 Provision CE-100T-8 and CE-1000-4 POS Ports Note Y ou can pro vision SONET CCA T or VCA T circuits for the CE-100 T -8 or CE-1000-4 before or after provisioning the card ’ s Et hernet ports an d/or P[...]

  • Page 9

    22-9 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A517 View Alarm or Event History DLP-A517 View Alarm or Event History Step 1 Decide whether you w ant to vie w the alarm message hi story at the node, n etwork, or card l e vel. Step 2 T o vie w node al arm history: a. Click the History > Session tabs to v[...]

  • Page 10

    22-10 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A518 Create a New or Cloned Alarm Severity P rofile c. Click the History > Session tab to vie w the alar m messages raised during the current session. d. Click the History > Card tab to retrieve all av ailable alarm messages for the card and click Retr[...]

  • Page 11

    22-11 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A518 Create a New or Cloned Alarm Severity Profile Figure 22-2 Node Vi ew Alar m Profile Edit or Step 3 T o access the profile editor from a card view , click the Provisioning > Ala rm Prof iles > Ala rm Prof ile Editor tabs. Step 4 If you want to cr e[...]

  • Page 12

    22-12 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A518 Create a New or Cloned Alarm Severity P rofile Step 9 Click Clone in the shortcut menu . Ti p T o see the full list of prof iles, in cluding tho se a v ailable for lo ading or cloning , click A vailable. Y ou must load a p rofile before you can clone it[...]

  • Page 13

    22-13 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A518 Create a New or Cloned Alarm Severity Profile Figur e 22-3 Stor e Pr ofiles Dialog Bo x a. Choose the nodes where you w ant to sa ve the prof ile: • If you want t o sav e the prof ile to onl y one node, cl ick the node in t he Node Names list. • If [...]

  • Page 14

    22-14 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A519 Apply Alar m Profiles to Ports DLP-A519 Apply Alarm Profiles to Ports Step 1 In the node vie w , double-click a car d to open the card vie w . Note Y ou can also apply alarm pr ofiles to cards using the “DLP-A117 Apply Alarm Prof iles to Cards and Nod[...]

  • Page 15

    22-15 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A520 Delete Alarm Severity Profiles Go to Step 3 to apply profiles to a port. Go to Step 4 to apply prof iles to all por ts on a card. Step 3 T o apply pr ofiles on a port basis: a. In card vie w , click the port row in the Prof ile column. b. Choose the ne [...]

  • Page 16

    22-16 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A520 Delete Alarm Severity Profiles Figure 22-5 Select Node/P rofile Combinatio n Fo r Delete Dialog Bo x Note Y ou cannot delete the Inherit e d or Def ault alarm prof iles. Note A pre viously created alar m profi le cannot be deleted unless it has been sto[...]

  • Page 17

    22-17 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A521 Modify Alarm, Condition, and History Filtering Parameters Note The Default and Inherited special p rof iles cannot be deleted and do no t appear in the Select Node/Profi le Combination for Delete W indow . Step 10 Return to your ori ginating procedure ([...]

  • Page 18

    22-18 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A521 Modify Alarm, Condition, and History Filtering Parameters Step 3 In the Show Se v erity area, click the check boxes for the se v erities [Cri tical (CR), Major (MJ ) , Minor (MN), or Not-Alarmed (N A)] you w ant to be reported at the networ k le vel. Le[...]

  • Page 19

    22-19 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A522 Suppress Alarm Reporting DLP-A522 Suppress Alarm Reporting Caution If multiple CTC/TL1 sessions are open, suppressing alarms in one se ssion suppresses the alarms in all other open sessions. Note Alarm suppression at the node le v el does not supers ede[...]

  • Page 20

    22-20 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A523 Discontinue Alarm Suppression Step 7 Click A pply . Alarms that apply directly to this port will change appearance as desc ribed in Step 2 . (How e ver , alarms raised on the entire card will remain r aised.) A raised AS-CMD alarm that sho ws the po rt [...]

  • Page 21

    22-21 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A524 Download an Alarm Severity Profile Suppressed alarms will reappear in the Alarms wi ndo w . (They migh t hav e pre viously been cleared from the windo w using the Synchron ize bu tton.) The AS-CMD alar m with the port object (for examp le, F A C-16-1) w[...]

  • Page 22

    22-22 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A526 Change Line and Threshold Settings for the DS3i-N-12 Cards Step 8 Right-click an ywhere in the do w nloaded prof ile column to vie w th e profil e editing short cut menu. Step 9 Click Stor e . Step 10 In the Store Prof ile(s) dialog b ox, click To N o d[...]

  • Page 23

    22-23 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A526 Change Line and Threshold Se ttings for the DS3i-N-12 Cards For def initions o f the line settings, see T able 22-1 . F or def initions of the line thr eshold settings, see T able 22-2 on page 22-25 . Fo r defi nitions of the electrical path threshol d [...]

  • Page 24

    22-24 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A526 Change Line and Threshold Settings for the DS3i-N-12 Cards T able 22-2 describes the parameters on the Pro visioning > Lin e Thresholds tabs for t he DS3i-N-12 cards. Admin State Sets the port administrati ve service stat e unless network conditions [...]

  • Page 25

    22-25 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A526 Change Line and Threshold Se ttings for the DS3i-N-12 Cards T able 22-3 describes the parameters on the Provi sioning > Elect Path Thresholds tabs for the DS3i-N-1 2 cards. T able 22-4 describes the values on the Provisioning > SONET Thresholds ta[...]

  • Page 26

    22-26 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A527 Change the OC-N Ca rd ALS Maintenance Settings Note The threshold value appears after the circuit is created. Step 7 Return to your ori ginating procedure (NTP). DLP-A527 Change the OC-N Card ALS Maintenance Settings Note For the default values and doma[...]

  • Page 27

    22-27 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A527 Change the OC-N Ca rd ALS Maintenance Settings Step 5 Return to your ori ginating procedure (NTP). T able 22-5 OC-N M aintenance Set tings Parameter Description Options Port number (Display only) Port number — ALS Mode Automatic laser shutdo wn mode. [...]

  • Page 28

    22-28 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A528 Change the Default Network View B ackground Map DLP-A528 Change the Default Network View Background Map Note If you modify the backgrou nd image, the change is stor ed in your CTC use r prof ile on the computer . The change does not affect other CTC use[...]

  • Page 29

    22-29 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A530 Install the Tie-Down Bar Step 1 Double-click the Ethernet car d where you w a nt to delete the RMON alarm t hresholds. Step 2 In card vie w , click the Pro visioning > Ether P orts > RMON Thre sholds tabs. Note For the CE-Series, click the Provisi[...]

  • Page 30

    22-30 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A531 Print CTC Data Figur e 22-8 Tie-Down Bar Step 2 Install the four scre ws into the rack. Step 3 Return to your ori ginating procedure (NTP). DLP-A531 Print CTC Data Step 1 Click the tab (and subtab, if present) containing the info rmation you w ant to pr[...]

  • Page 31

    22-31 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A531 Print CTC Data • T abbed V ie w—Prints the lo wer half of the CTC windo w con taining tabs and data. The prin tout includes the selected tab (o n top) and the data sho wn in the tab windo w . For example, if you print the History win do w T abbed V [...]

  • Page 32

    22-32 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A532 Export CTC Data Step 6 Repeat this task for each wi ndo w that you want t o print. Step 7 Return to your ori ginating procedure (NTP). DLP-A532 Export CTC Data Step 1 Click the tab containing the information you want to e xport (for e xample, the Alarms[...]

  • Page 33

    22-33 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A532 Export CTC Data Step 5 If you want to open a f ile in a te xt editor or w ord processor application, procedu res v ary . T ypically , you can use the File > Open co mmand to vie w the CTC da ta, or y ou can double-click the f ile name and choose an a[...]

  • Page 34

    22-34 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A533 Create Etherne t RMON Alarm Thre sholds DLP-A533 Create Ethernet RMON Alarm Thresholds Note The ONS 15454 ML-Series cards us e the Cisco IOS CLI to manage RMON. Step 1 Complete the DLP-A60 Log into CTC, page 17-69 at the node where you want to set up RM[...]

  • Page 35

    22-35 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A533 Crea te Ethern et RMON Ala rm Threshol ds T able 22-6 Eth er net Thr e shold V ar iables (MIBs) V ariable Definition iflnOctets T otal number of octets recei ved on the interface, incl uding framing octets iflnUcastPkts T otal number of u nicast packets[...]

  • Page 36

    22-36 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A533 Create Etherne t RMON Alarm Thre sholds dot3StatsExcessi v eCollisions (Not suppor ted by E-Seri es or G-Series) Num ber of frames where transmissions failed be cause of excessi ve collisions dot3StatsCarrierSenseErr ors (G-Series only) The number of tr[...]

  • Page 37

    22-37 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A533 Crea te Ethern et RMON Ala rm Threshol ds etherStatsCollisionF rames An estimate of the total nu mber of collisions on t his Ethernet segment. The v alu e returned will d epend on the location of the RMON probe. Section 8.2.1.3 (1 0Base5) and Section 10[...]

  • Page 38

    22-38 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A533 Create Etherne t RMON Alarm Thre sholds etherStatsPkts512to1023Octets T otal number of pa ckets receiv ed (including error packets) that were 512 to 1023 octet s in length etherStatsPkts1024to1518Octets T ota l number of packets received (i ncluding err[...]

  • Page 39

    22-39 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A533 Crea te Ethern et RMON Ala rm Threshol ds Step 7 From the Alarm T ype drop-do wn list, indicate whether the ev ent will be tr iggered by the rising threshold , falling threshold, or both the ri sing and fa lling threshold s. Step 8 From the Sample T ype[...]

  • Page 40

    22-40 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A534 Provision OSI Rou ting Mode DLP-A534 Provision OSI Routing Mode Caution Do not complete this task unti l you conf irm the role of the node within t he network. I t will be ei ther an ES, IS Le vel 1, or IS Le v el 1/Le ve l 2. This decision must be car [...]

  • Page 41

    22-41 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A535 Provision or Modify TARP Operating Parameters • Intermediate System Le vel 1 /Le vel 2—Th e ONS 15454 performs IS function s. It communicates with IS and ES nodes t hat reside within its OSI ar ea. It also communicates w ith IS L1/L2 nodes that resi[...]

  • Page 42

    22-42 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A535 Provision or Mod ify TARP Operating Parameters • T ARP PDUs Origination—If checked (default), the node performs all T ARP origination functions includin g: – TID to Network Service Access Point (NSAP) reso lution requests (originat e T ARP T ype 1[...]

  • Page 43

    22-43 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A536 Add a Static TID to NSAP Entry to the TARP Data Cache • T2—Sets the amount of ti me to wait for a respo nse to a T ype 2 PDU. T ARP T ype 2 PDUs seek a specific NE TID v alue within OSI Le vel 1 and Lev e l 2 areas. The default is 25 seconds. The ra[...]

  • Page 44

    22-44 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A537 Remove a Static TID to NS AP Entry from the TARP Data Cache DLP-A537 Remove a Static TID to NSAP Entry from the TARP Data Cache Step 1 In node vie w , click the Pr ovisioning > OSI > T ARP > Static TDC tabs. Step 2 Click the static entry that y[...]

  • Page 45

    22-45 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A539 Provision OSI Routers Step 4 Click OK to close the Masked NSAP Entry dial og box, if used, and then click OK to close the Add Stati c Entry dialog box. Step 5 Return to your ori ginating procedure (NTP). DLP-A539 Provision OSI Routers Note Router 1 must[...]

  • Page 46

    22-46 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A540 Provision Additio nal Manual Area Addresses DLP-A540 Provision Additional Manual Area Addresses Step 1 In node vie w , click the Pr ovisioning > OSI > Routers > Setup tabs. Step 2 Chose the router where you w ant pro vision an additional manual[...]

  • Page 47

    22-47 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A541 Enable the OSI Subnet on the LAN Interface Note The OSI subnetwork point of attachment cannot be enabled for the LAN interf ace if the OSI routing mode is set to ES (end system). Note If Secure Mode is on, the OSI Subnet is enabled on the backplane LAN [...]

  • Page 48

    22-48 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A542 Create an IP- Over-CLNS Tunnel DLP-A542 Create an IP-Over-CLNS Tunnel Caution IP-ov er -CLNS tunnels require tw o end points. Y ou will create one point on an ONS 15454. The oth er end point is generally pro visioned on non -ONS equi pment including rou[...]

  • Page 49

    22-49 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A543 Remove a TARP Manual Ad jacency Table Entry Step 5 Provisio n the other tun nel end point using th e documentation. Step 6 Return to your ori ginating procedure (NTP). DLP-A543 Remove a TARP Manual Adjacency Table Entry Caution If T ARP manual adjacenc [...]

  • Page 50

    22-50 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A544 Change the OSI Routing Mode Caution LSP buf fer sizes cannot be greater than the LAP-D MTU size within the OSI area. Step 1 V erify the follo wing: • All L1/L2 virtual routers on th e NE must reside in the same area. This means that all neighboring vi[...]

  • Page 51

    22-51 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A545 Edit the OSI Router Configuration DLP-A545 Edit the OSI Router Configuration Step 1 In node vie w , click the Pr ovisioning > OSI > Routers > Setup tabs. Step 2 Chose the router you wa nt provi sion and click Edi t . Step 3 In the OSI Router Ed[...]

  • Page 52

    22-52 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A547 Edit an IP-Over-CLNS T unnel Step 2 Choose the subnet you wa nt to edit, then click Edit . Step 3 In the Edit < subnet type > Subnet < slot/port > dialog box, edit the fo llo wing f ields: • ESH—The End System Hello PDU propagation freq [...]

  • Page 53

    22-53 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A548 Delete an IP-Over-CLNS Tunnel The Cisco proprietary tunn el is slightly more ef f i cient than the GRE tunnel because it does not add the GRE header to each IP packet. The two tunne l types are not compatible. Most Cisco routers support the Cisco IP tun[...]

  • Page 54

    22-54 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A549 View IS-IS Routing Information Base DLP-A549 View IS-IS Routing Information Base Step 1 In the node vie w , click the Maintenance > OSI > IS-IS RIB tabs. Step 2 V iew the following RIB in formation fo r Router 1: • Subnet T ype—Indicates the O[...]

  • Page 55

    22-55 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A550 View ES-IS Routing Information Base DLP-A550 View ES-IS Routing Information Base Step 1 In node vie w , click the Maintenance > OSI > ES-IS RIB tabs. Step 2 V iew the following RIB in formation fo r Router 1: • Subnet T ype—Indicates the OSI s[...]

  • Page 56

    22-56 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A552 Adjust the Java Virtual Memory Heap Size Step 2 V iew the following T ARP data cache information: • TID—The target iden tif ier of the originating NE. F or ONS 15454s, th e TID is the name entered in the Node Nam e/TID field on the Provisioni ng >[...]

  • Page 57

    22-57 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A553 Upgrade DS1 or DS3-12 Cards in a 1:N or 1:1 Configura tion to High-Density Electrical Cards Step 6 T ype “CTC_HEAP” in the V ariable Name fi eld. Step 7 T ype “512” in the V a riable V alue field. Step 8 Click OK . Step 9 Reboot your PC. Step 10[...]

  • Page 58

    22-58 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A553 Upgrade DS1 or DS3-12 Cards in a 1:N or 1: 1 Configuration to High-D ensity Electrical Cards • For 1:N p rotection groups where N = 2: On the A side, the protect card cannot b e upgraded if an y electrical cards are installed or preprovision ed in Slo[...]

  • Page 59

    22-59 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A553 Upgrade DS1 or DS3-12 Cards in a 1:N or 1:1 Configura tion to High-Density Electrical Cards b. Click the Maintenance > Protection tabs. c. Double-click the protection g roup that cont ains the w orking card. d. Click the lo w-density car d slot. e. C[...]

  • Page 60

    22-60 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A553 Upgrade DS3XM-6 Cards in a 1:1 Configuration to High-Density DS3XM-12 Electrical Cards Step 16 Return to your ori ginating procedure (NTP). DLP-A553 Upgrade DS3XM-6 Cards in a 1:1 Configuration to High-Density DS3XM-12 Electrical Cards Note Y ou cannot [...]

  • Page 61

    22-61 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A553 Upgrade DS3XM-6 Cards in a 1:1 Configuration to High-Density DS3XM-12 Electrical Cards The follo wing limitatio ns apply to upgrading a working card aft er you ha ve up graded the protect card: • A working card on the A can not be upgraded if an DS1 c[...]

  • Page 62

    22-62 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A553 Upgrade DS3XM-6 Cards in a 1:1 Configuration to High-Density DS3XM-12 Electrical Cards b. Choose the ne w high-den sity card type from the Change to drop-do wn list. c. Click OK. Step 13 Insert the new high-density electrica l card into the slot where y[...]

  • Page 63

    22-63 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A554 Upgrade EC-1 Cards in a 1: 1 Configuration to DS3/EC1-48 Cards DLP-A554 Upgrade EC-1 Cards in a 1: 1 Configuration to DS3/EC1-48 Cards Note Y ou cannot ha v e any DS-1 cards installed on the same side of the shelf as the DS3/EC1-48 card when you finish [...]

  • Page 64

    22-64 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A554 Upgrade EC-1 Cards in a 1: 1 Configuration to DS3/EC1-48 Cards Slot 1 contai ns the protect card if yo u are working on the A side of the shelf, and Slot 1 7 contains the protect card if you are working on the B side of the shelf . Step 5 Make sure the [...]

  • Page 65

    22-65 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A554 Upgrade EC-1 Cards in a 1: 1 Configuration to DS3/EC1-48 Cards Step 12 Change the lo w-density card to t he high-density card in CTC: a. Right-click Slot 1/Slo t 17 and choose Change Card fr om the drop-do wn list. b. Choose the ne w card type f rom the[...]

  • Page 66

    22-66 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A554 Upgrade EC-1 Cards in a 1: 1 Configuration to DS3/EC1-48 Cards[...]