Bosch Appliances D7412G manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142

Aller à la page of

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Bosch Appliances D7412G. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Bosch Appliances D7412G ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Bosch Appliances D7412G décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Bosch Appliances D7412G devrait contenir:
- informations sur les caractéristiques techniques du dispositif Bosch Appliances D7412G
- nom du fabricant et année de fabrication Bosch Appliances D7412G
- instructions d'utilisation, de réglage et d’entretien de l'équipement Bosch Appliances D7412G
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Bosch Appliances D7412G ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Bosch Appliances D7412G et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Bosch Appliances en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Bosch Appliances D7412G, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Bosch Appliances D7412G, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Bosch Appliances D7412G. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    EN Program Entry Guide Control Panels D9412G/D7412G[...]

  • Page 2

    D9412G/D7412G | Program Entry Guide | EN | 2 Bosch Security Systems | 1/04 | 47775E Trademarks CoBox  is a registered trademark of Lantronix ® . Windows ® is either a registered trademark of Microsoft Corporation in the United States and/or other countries. Documentation Conventions Type Styles Used in this Manual To help identify important it[...]

  • Page 3

    D9412G/D7412G | Program Entry Guide | Table of Contents EN | 3 Bosch Security Systems | 1/04 | 47775E Table of Contents 1.0 Introduction ....................................................... 5 1.1 How to use this Program Entry Guide ............. 5 1.2 Literature Referenced......................................... 5 1.3 Differences Between the D9[...]

  • Page 4

    D9412G/D7412G | Program Entry Guide | Table of Contents EN | 4 Bosch Security Systems | 1/04 | 47775E 6.7 Miscellaneous .................................................. 127 6.8 Cross Point Parameters .................................. 128 7.0 RADXAXS ..................................................... 131 7.1 Door Profile ......................[...]

  • Page 5

    D9412G/D7412G | Program Entry Guide | 1.0 Introduction EN | 5 Bosch Security Systems | 1/04 | 47775E 1.0 Int roduct ion 1.1 How to use this Program Entry Guide This guide addresses the programming of the D9412G/D7412G Control Panels only, and should not be used in conjunction with other control panels. Although this guide specifically refers to the[...]

  • Page 6

    D9412G/D7412G | Program Entry Guide | 1.0 Introduction EN | 6 Bosch Security Systems | 1/04 | 47775E 1.4 New Features The items shown Table 3 are new features added to the D9412G/D7412G Control Panels since version 6.10. Table 3: New Features Feature Description Ground Fault Detect (Version 6.10) For the D9412G/D7412G to detect ground fault co ndit[...]

  • Page 7

    D9412G/D7412G | Program Entry Guide | 1.0 Introduction EN | 7 Bosch Security Systems | 1/04 | 47775E Table 3: continued Feature Description Fire Trouble Resound Mode (Version 6.30) To help our Bosch Security Systems dealers prog ram this feature more easily, the prompt, Fire Trouble Resound was added to Section 6.7 Miscellaneous . Sked Functions (V[...]

  • Page 8

    D9412G/D7412G | Program Entry Guide | 1.0 Introduction EN | 8 Bosch Security Systems | 1/04 | 47775E 1.5 Product Handlers Programming the 9000 Series requires multiple product handlers. The availability of each handler is indicated in Table 4 . See the control panel specific Release Notes to determine the most up-to-date handler versions. Although [...]

  • Page 9

    D9412G/D7412G | Program Entry Guide | 1.0 Introduction EN | 9 Bosch Security Systems | 1/04 | 47775E 1.7 Programming the Control Panel with the D5200 Programmer Latch the jumper in the upper right hand corner of the control panel labeled as RESET on the PCB and Reset Pin on the faceplate. Connect the molex end of the cord to the connector labeled P[...]

  • Page 10

    D9412G/D7412G | Program Entry Guide | 1.0 Introduction EN | 10 Bosch Security Systems | 1/04 | 47775E Notes:[...]

  • Page 11

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 11 Bosch Security Systems | 1/04 | 47775E 2 . 0 9000 M A IN Use this programming module to define the operating characteristics that affect panel-wide functions. There are nine programming categories in this module: Phone, Phone Parameters, Routing, Enhanced Communications, Area Parameters, Co[...]

  • Page 12

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 12 Bosch Security Systems | 1/04 | 47775E 2.2 Phone Parameters The program items in this category describe panel- wide characteristics for telephone dialing, receiver format, and supervision. Modem Format Default: Yes Selection: Yes or No Yes Radionics’ Modem IIIa 2 Communication Format: Rep[...]

  • Page 13

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 13 Bosch Security Systems | 1/04 | 47775E Table 6: Modem IIIa 2 Communication Format Data - User ID Numbers Point/User Flag NO Point/User Flag YES 000 000 001 to 005 001 to 005 006 to 013 601 to 608 014 to 021 701 to 708 022 to 029 801 to 808 030 to 037 B01 to B08 038 to 045 C01 to C08 046 to [...]

  • Page 14

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 14 Bosch Security Systems | 1/04 | 47775E Phone Supv Time Default: Blank Selection: Blank or 10 to 240 Blank No phone line supervision. 10 to 240 Enter the number of seconds (in 10 second increments) you wish to supervise the phone line. After a faulted phone line restores, it takes the same a[...]

  • Page 15

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 15 Bosch Security Systems | 1/04 | 47775E BFSK Duress Code Default: 0 Selection: 0 to 9 If Duress Enable in Area Parameters is Yes and Modem Format in Phone Parameters is No, you must program a number to identify Duress Reports at the central station. Expand Test Rpt Default: No Selection: Yes[...]

  • Page 16

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 16 Bosch Security Systems | 1/04 | 47775E 2.3.3 Programming a Primary and Backup Destination Each route number has an R# Primary Device and an R# Backup Device . In typical applications where two phone numbers are programmed, the R# Primary Device destination is the phone number the route grou[...]

  • Page 17

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 17 Bosch Security Systems | 1/04 | 47775E Route # Default: 1 Selection: 1 to 4 1 First group sent 2 Second group sent 3 Third group sent 4 Fourth group sent Enter the number specifying the route group to program. The route represents the group you wish to send a group of reports. The groups ar[...]

  • Page 18

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 18 Bosch Security Systems | 1/04 | 47775E Fire Reports Selecting Yes enables a report to be sent when the event occurs. Table 9: Diagnostic Reports Report Selections Description R# Fire Alarm Yes , No Reports Fire Event. R# Fire Restore (Alarm) Yes , No Reports fire restoral from alarm. R# Fir[...]

  • Page 19

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 19 Bosch Security Systems | 1/04 | 47775E Restoral Reports are not sent if the control panel is reset after a point is bypassed and then the point is unbypassed. This is true for both Fire and Non-fire points. The 9000 Series Control Panels log a Ground Fault Event as Trouble Point 256. User R[...]

  • Page 20

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 20 Bosch Security Systems | 1/04 | 47775E Test Reports 0101 0101 0101 To send a single Test Report (R# Test Report), enable Sked Function Code #9 (Test Report) in the Skeds section of the program. To expand this Test Report to include any off-normal point condition or other off- normal conditi[...]

  • Page 21

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 21 Bosch Security Systems | 1/04 | 47775E Table 13: Diagnostic Reports Report Selections Description R# SDI Dev Fail * Yes , No Reports SDI device failure. R# SDI Dev Restl Yes , No Reports restoral of SDI device failure. R# Watchdog Rset Yes , No Reports Watchdog Reset Event. R# ParaChksmFail[...]

  • Page 22

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 22 Bosch Security Systems | 1/04 | 47775E RAM Reports Selecting Yes enables sending a report when the RAM Passcode Event occurs. RAM Access Fail can indicate a wrong RAM passcode when communicating with the control panel, or a valid RAM session was terminated by a means other than a Good-bye o[...]

  • Page 23

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 23 Bosch Security Systems | 1/04 | 47775E User Chng Reports Selecting Yes enables a report to be sent when the event occurs. Table 18: User Change Reports Report Selections Description R# Date Changed Yes , No Reports Date Change Event. R# Time Changed Yes , No Reports Time Change Event. R# De[...]

  • Page 24

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 24 Bosch Security Systems | 1/04 | 47775E 2.4.2 Programming a Duplicate Report To allow an event within a group to report to multiple groups, the event should be Yes for each route number available. For instance, programming Fire Alarms for Route Group 1 and Route Group 2 results in the fire a[...]

  • Page 25

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 25 Bosch Security Systems | 1/04 | 47775E RG# Primary Pager Default: No Selection: Yes or No Determines if this route group sends events to a numeric pager. To send events to a numeric pager, a phone number must also be programmed in the route group’s primary destination. 0101 0101 0101 If p[...]

  • Page 26

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 26 Bosch Security Systems | 1/04 | 47775E For example, the phone number 2773074***CC (7 digit pager phone number followed by three asterisks and two pauses) produces the following pager display: [1234-001-011] (three fields display at the pager). Table 20 shows the description of each event, i[...]

  • Page 27

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 27 Bosch Security Systems | 1/04 | 47775E Table 20: continued Event Description Event Priority Event Number Parameters Changed 008 054 RAM Access OK 008 064 RAM Access Fail 008 065 Remote Reset 008 079 Program Access OK n/a n/a Program Access Fail n/a n/a Service Start 008 029 Service End 008 [...]

  • Page 28

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 28 Bosch Security Systems | 1/04 | 47775E • 9 (such as 9, 19, 29, 39, and so on): The AC Fail Time interval is in minutes and an AC Fail Event is transmitted after the loss of AC for this amount of time. An additional AC Fail Event is transmitted after 12 hours if the AC Fail condition is st[...]

  • Page 29

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 29 Bosch Security Systems | 1/04 | 47775E AC/Battery Buzz Default: No Selection: Yes or No Yes Initiates panel-wide trouble tone at all command centers. No Does not initiate panel-wide trouble tone at command centers Initiate a panel-wide trouble tone at command centers when AC fails or batter[...]

  • Page 30

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 30 Bosch Security Systems | 1/04 | 47775E When P## Supervised is set to Yes and all Printer Event Groups (such as P## Fire Events , P## Burglar Event , or P## Usr Chng Evt ) are set to No, the control panel does not generate Trouble SDI ## Reports for the printer if the D9131A becomes disconne[...]

  • Page 31

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 31 Bosch Security Systems | 1/04 | 47775E P## Auto Functions Event Default: See Program Record Sheet Selection: Yes or No P## RAM Event Default: See Program Record Sheet Selection: Yes or No P## Relay Event Default: See Program Record Sheet Selection: Yes or No P## Point Event Default: See Pro[...]

  • Page 32

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 32 Bosch Security Systems | 1/04 | 47775E RAM Passcode Default: 999999 Selection: 0 to 9, A to F (six characters required) Enter six characters. Do not use a space in the passcode. The control panel verifies the Remote Account Manager at the central station has valid access before connecting u[...]

  • Page 33

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 33 Bosch Security Systems | 1/04 | 47775E 0101 0101 0101 Program this item No if it causes false seizures of the phone line or if you are not using RAM (this indicates a device using the same frequency tone is also using the phone line to which the control panel is connected). If RAM Call Back[...]

  • Page 34

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 34 Bosch Security Systems | 1/04 | 47775E 2.8 Miscellaneous Duress Type Default: 1 Selection: 1 or 2 1 Add 1 to the last digit to generate an alarm. For example, if the passcode is 6123, 6124 triggers a duress alarm. If the last digit of the passcode is 0, a duress alarm is generated when the [...]

  • Page 35

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 35 Bosch Security Systems | 1/04 | 47775E A# Acct Number Default: 0000 Selection: For BFSK: 0000 to 0999, 0BBB to 0FFF For Modem (four-digit account numbers): 0000 to 9999, BBBB to FFFF For Modem (ten-digit account numbers): 0000000000 to 9999999999, BBBBBBBBBB to FFFFFFFFFF Determines the acc[...]

  • Page 36

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 36 Bosch Security Systems | 1/04 | 47775E Figure 2: Account Number Entry 22 33 44 55 11 2 3 4 5 6 7 1 1 - RPS account number entry 2 - Corresponding D5200 account number digits 3 - Digits 1 and 2 4 - Digits 3 and 4 5 - Digits 5 and 6 6 - Digits 7 and 8 7 - Digits 9 and 10 Although the D5200 al[...]

  • Page 37

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 37 Bosch Security Systems | 1/04 | 47775E A# Auto Watch Default: No Selection: Yes or No Yes When the area is disarmed, Watch Mode turns on automatically. No When the area is disarmed, Watch Mode must be turned on or off manually. 0101 0101 0101 Controlled points must be programmed as P## Watc[...]

  • Page 38

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 38 Bosch Security Systems | 1/04 | 47775E A# Duress Enable Default: No Selection: Yes or No Yes Enable Duress alarm for this area. No Disable Duress alarm for this area. This entry determines if this area allows duress alarms to be generated. See the Duress Type prompt in Section 2.8 Miscellan[...]

  • Page 39

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 39 Bosch Security Systems | 1/04 | 47775E A# Area Type Default: Regular Selection: Regular, Master, Associate, or Shared Regular Arms or disarms as an independent area. Master Does not allow arming for this area unless all associate areas with the same A# account number are master exit delay a[...]

  • Page 40

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 40 Bosch Security Systems | 1/04 | 47775E 2.9.3 Shared-Area Characteristics Arming a Shared Area Requires all associate areas to be armed. As soon as the last associate area is armed, the shared area begins its arming sequence automatically. Passcode, keyswitch, sub-controls, or RAM cannot arm[...]

  • Page 41

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 41 Bosch Security Systems | 1/04 | 47775E A# Fire Time Default: 9 Selection: 1 minute to 90 minutes Enter the number of minutes the bell rings for Fire Alarm points. The relay activated for this time is programmed in A# Fire Bell in Area Relays. The bell output begins as soon as the fire alarm[...]

  • Page 42

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 42 Bosch Security Systems | 1/04 | 47775E If a 24-hour point alarms while the area is disarmed, arming that area with a keyswitch does not clear the A# Single Ring flag. Silencing the bell resets A# Single Ring . A# Bell Test Default: No Selection: Yes or No Yes Initiate Bell Test. No Do not i[...]

  • Page 43

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 43 Bosch Security Systems | 1/04 | 47775E Combination Account and Area Opening and Closing Reports To send both account openings and closings, and individual area openings and closings for all areas in the account, you must: • Program A# Acct O/C Yes for all areas in the account. • Program[...]

  • Page 44

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 44 Bosch Security Systems | 1/04 | 47775E A# Area O/C Default: Yes Selection: Yes or No Yes Include the Area # and generate Opening and Closing Reports for this area when it is armed. No Do not include the Area # or generate Opening and Closing Reports for this area. Determines if the area num[...]

  • Page 45

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 45 Bosch Security Systems | 1/04 | 47775E A# Fail to Close Default: No Selection: Yes or No Yes Fail to Close Report occurs for this area if the area was not armed when the Closing Window stop time occurred. Note: An exit delay time must be programmed in Exit Dly Time. No Fail to Close Report [...]

  • Page 46

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 46 Bosch Security Systems | 1/04 | 47775E A# Perimeter O/C Default: No Selection: Yes or No Yes This area can send Perimeter Opening and Closing Reports. No This area cannot send Perimeter Opening and Closing Reports. This item determines if this area can send Perimeter Instant and Perimeter D[...]

  • Page 47

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 47 Bosch Security Systems | 1/04 | 47775E CC# Supervised Default: See Program Record Sheet Selection: Yes or No Yes Only one command center can be installed for this CC SDI address. No More than one command center can be installed using this CC SDI address with the same address DIP switch sett[...]

  • Page 48

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 48 Bosch Security Systems | 1/04 | 47775E CC# A1[through A8] in Scope Default: See preceding important note Selection: Yes or No Yes Include this area in the scope of this command center. No Do not include this area in the scope of this command center. Determines whether any of the eight areas[...]

  • Page 49

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 49 Bosch Security Systems | 1/04 | 47775E CC# Assign Door Default: Blank Selection: 1 to 8, Blank Blank No door controller is assigned for adding tokens or the CLOSE DOOR # displays on the command center. 1 to 8 A ssign the door controller that enters the Add User Mode when initiated. This doo[...]

  • Page 50

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 50 Bosch Security Systems | 1/04 | 47775E 0101 0101 0101 This prompt allows you to manage the tone by command center. Exit Tone can also be turned off when programming A# Exit Tone in Area Parameters. Assign two CCs to the same area so one command center emits the tone and another does not. CC[...]

  • Page 51

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 51 Bosch Security Systems | 1/04 | 47775E Area # Acct Is On Default: See Program Record Sheet Selection: Sixteen alphanumeric characters Enter the text that displays when all areas sharing the same account number are master armed. The ACCT IS ON text appears at all command centers assigned to [...]

  • Page 52

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 52 Bosch Security Systems | 1/04 | 47775E CF### Key Strokes Default: See Program Record Sheet Selection: Up to 32 characters: 0 to 9, A, B, C, D, and E Selection Key Faceplate Label 0 to 9 0 to 9 A [COMMAND] B [PREV] (previous) ↑ C [ESC] (escape) MENU D[ N E X T ] ↓ E [ENT] (enter) YES The[...]

  • Page 53

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 53 Bosch Security Systems | 1/04 | 47775E • Custom Functions can perform several tasks at once. For example: - To toggle relays 7, 8, and 9 in one Custom Function enter: [A] [5] [4] [7] [E] [E] [8] [E] [E] [9] [E] [E] [C] - To add a temporary passcode, enter: [A] [5] [6] [3] [0] [E] [E] [9] [...]

  • Page 54

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 54 Bosch Security Systems | 1/04 | 47775E Master Arm Delay Default: P Selection: Blank, E, or P P Passcode: Required for all users with Master Arm Delay enabled for their authority level. E Enable: A user does not need a passcode to use [COMMAND][1]. Blank Disable Master Arm Delay cannot be ac[...]

  • Page 55

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 55 Bosch Security Systems | 1/04 | 47775E View Area Stat Default: P Selection: Blank, E, or P #8 View Area Status (MENU FUNCTION only) Use this function to view the armed status of all areas within the scope of the command center assigned to this area. The armed states include A# AREA # IS OFF[...]

  • Page 56

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 56 Bosch Security Systems | 1/04 | 47775E Access Ctl Level Default: P Selection: Blank, E, or P #37 Access Control Levels (MENU FUNCTION only) Shows the current on/off state of control levels 1 through 14, pertaining to Access Control Only, ( L## Access Level and L## Disarm Level ). It allows [...]

  • Page 57

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 57 Bosch Security Systems | 1/04 | 47775E Print Log Default: P Selection: Blank, E, or P #22 Print Event Log (MENU FUNCTION only) Use this function to print all the events stored in the control panel starting at the start date and ending with the last event in the log. User Cmd 7 Default: P Se[...]

  • Page 58

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 58 Bosch Security Systems | 1/04 | 47775E Move to Area Default: P Selection: Blank, E, or P #30 Move to Area [COMMAND][5][0] Use this function to temporarily switch the command center’s assignment to a different area. This can be used to perform any function that can be performed by a comman[...]

  • Page 59

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 59 Bosch Security Systems | 1/04 | 47775E 2.11.3 Authority Level Selections Use Section 2.11.3 Authority Level Selections to determine which Authority Level can access command center functions that are Passcode Protected. You do not need to select Enable items in the Authority Level section if[...]

  • Page 60

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 60 Bosch Security Systems | 1/04 | 47775E L## Perim Instant Default: See Program Record Sheet Selection: Blank or E #4 Perimeter Instant Arm [COMMAND][2] Instant arm all Perimeter points, including Delayed points, only in the area where the command center is assigned. L## Perim Delay Default: [...]

  • Page 61

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 61 Bosch Security Systems | 1/04 | 47775E To Walk Test a Door point connected to a D9210B Access Interface Module, the door must be opened without activating the door sequence or allowing it to time out past the extended shunt time. L## Fire Test Default: See Program Record Sheet Selection: Bl[...]

  • Page 62

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 62 Bosch Security Systems | 1/04 | 47775E L## Unlock Door Default: See Program Record Sheet Selection: Blank or E Unlock Door (MENU FUNCTION only) Press the command center number keys [1] through [8] that correspond to the door number to unlock/relock doors. For example, pressing [2] and [ENTE[...]

  • Page 63

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 63 Bosch Security Systems | 1/04 | 47775E L## Chg Display Default: See Program Record Sheet Selection: Blank or E #15 Change Display [COMMAND][4][9] Change the display (bright display, dim display, and time display) in the area where this command center is assigned. L## Chg Time/Date Default: [...]

  • Page 64

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 64 Bosch Security Systems | 1/04 | 47775E L## User Cmd 9 Default: See Program Record Sheet Selection: Blank or E #24 User COMMAND 9 [COMMAND][9] Can be used in Function Menu. Generate the alarm programmed at COMMAND 9 in the RADXPNTS Handler. L## Bypass a Pt Default: See Program Record Sheet S[...]

  • Page 65

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 65 Bosch Security Systems | 1/04 | 47775E - D1255 command center displays a sequential count after each point is activated and restored as well as the text for the point. - The D1255 command center displays ALL PNTS TESTED . - If enabled in Routing, Service Start and Service End are reported a[...]

  • Page 66

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 66 Bosch Security Systems | 1/04 | 47775E L## Passcode Disarm Default: See Program Record Sheet Selection: Blank or E Disarm an area by entering a passcode and pressing [ENTER]. Access Control Levels L## Security Level Default: See Program Record Sheet Selection: M, P, D, or Blank M Users have[...]

  • Page 67

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 67 Bosch Security Systems | 1/04 | 47775E 2.12 Function List The Function List is accessed when the user presses [MENU] (or the key corresponding to menu) on the D1260) while the command center is displaying the idle text. Up to 32 functions M### Function(s) can be programmed. Each CC # comman[...]

  • Page 68

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 68 Bosch Security Systems | 1/04 | 47775E • Relay Reports: When relay activity is reported to the receiver (see Section 2.3 Routing ), on-board relays are reported as follows: A = 253, B = 254, C = 255. The others report as 001 to 128. The Relay Report is RELAY SET RELAY # rrr when the relay[...]

  • Page 69

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 69 Bosch Security Systems | 1/04 | 47775E A# Fire Bell Default: A Selection: Blank, 1 to 128 (1 to 64 for D7412G), A, B, or C This voltage output relay activates and provides 12 VDC output when a Fire point ( P## Fire is Yes ) assigned to this area goes into alarm. 0101 0101 0101 Fire Time and[...]

  • Page 70

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 70 Bosch Security Systems | 1/04 | 47775E A# Area Armed Default: Blank Selection: Blank, 1 to 128 (1 to 64 for D7412G), A, B, or C Activates when the specified area becomes master armed (exit delay must expire before the relay activates). The relay remains activated until the area is disarmed.[...]

  • Page 71

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 71 Bosch Security Systems | 1/04 | 47775E 0101 0101 0101 Programming Tip #4: Fire Trouble Resound was added to firmware versions 6.20 and later. This feature, when enabled, resounds the Fire Trouble condition at 12:00 PM or 12:00 AM if the Fire Trouble condition still exists. It does not, howe[...]

  • Page 72

    D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 72 Bosch Security Systems | 1/04 | 47775E Comm Fail Default: Blank Selection: Blank, 1 to 128 (1 to 64 for D7412G), A, B, or C This relay activates when a control panel is unable to communicate a report after making ten attempts to each routing destination. At the same time, COMM FAIL RT ## di[...]

  • Page 73

    D9412G/D7412G | Program Entry Guide | 3.0 RADXUSR1/RADXUSR2 EN | 73 Bosch Security Systems | 1/04 | 47775E 3.0 RADX U S R1 / R ADX US R2 3.1 Passcode/Token Worksheet These programming items assign user groups 001 to 249 a passcode, area assignment by authority level, and a User Group Window. 0101 0101 0101 Two handlers in the D5200 Programmer are u[...]

  • Page 74

    D9412G/D7412G | Program Entry Guide | 3.0 RADXUSR1/RADXUSR2 EN | 74 Bosch Security Systems | 1/04 | 47775E Figure 3: User Group 122 Example Master User: ID 122 . ♦ CRD ID 122-0 ♦ Sub User -1: ID 122-1 CRD ID 122-1 ♦ Sub User -2: ID 12 2-2. CRD ID 122-2 ♦ Sub User -3: ID 12 2-3. CRD ID 122-3 2 1 1 - User passcode 2 - User token/card 0101 010[...]

  • Page 75

    D9412G/D7412G | Program Entry Guide | 3.0 RADXUSR1/RADXUSR2 EN | 75 Bosch Security Systems | 1/04 | 47775E A silence bell authority is built into all authority levels, even if they are the default and none of the available programmable functions are enabled. A user passcode can silence a Fire/Burg bell as long as any authority level is assigned to [...]

  • Page 76

    D9412G/D7412G | Program Entry Guide | 3.0 RADXUSR1/RADXUSR2 EN | 76 Bosch Security Systems | 1/04 | 47775E 0101 0101 0101 Converting hexadecimal to decimal: If your card label contains letters as well as numbers, the number is hexadecimal.* Convert the hexadecimal number to decimal using your calculator. If you cannot convert in this way, use the r[...]

  • Page 77

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 77 Bosch Security Systems | 1/04 | 47775E 4.0 RADX P NTS 4.1 Point Index Use this programming module to construct personality types for points used in the system. The Index numbers are used in Point Assignments. Each unique point index number determines the control panel’s responses to speci[...]

  • Page 78

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 78 Bosch Security Systems | 1/04 | 47775E P ## Type Selection Description 2 Interior: Interior points are armed only by master arming the area. They are NOT armed when using Perimeter Arming functions. These points are typically used to monitor interior detection devices such as interior doors[...]

  • Page 79

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 79 Bosch Security Systems | 1/04 | 47775E P ## Type Description Keyswitch Maintained: Program Point Response as 1. Do not connect initiating devices to a Keyswitch point. Normal: The area is disarmed. Short: When this point changes from normal to open, the area arms. Open: A short is a trouble[...]

  • Page 80

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 80 Bosch Security Systems | 1/04 | 47775E P ## Type Selection Description D279 (O/C Non-Priority): The D279 provides point arming and disarming independent of the area arm state. A non-priority D279 point arm state does not affect the area arm state. Point Response must be programmed 1. Local [...]

  • Page 81

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 81 Bosch Security Systems | 1/04 | 47775E 4.1.1 Point Responses Applications for Point Responses 9, D, and E: Combine Point Responses 9, D, and E with Perimeter point types to create more flexible 24-hour protection. Unlike 24-hour points, a faulted Perimeter point with a Point Response of D a[...]

  • Page 82

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 82 Bosch Security Systems | 1/04 | 47775E P## Pt Response Default: See Program Record Sheet Selection: 0 to F Controlled (Non-24-Hour Points) P o i n t R e s p o n s e 0123456789 A B C D E F Armed Open IIIIDDIIDIIIIIT Armed Short IIIIIIDDDIIIIII Disarmed Open TT TI I T IT Disarmed Short TT T I[...]

  • Page 83

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 83 Bosch Security Systems | 1/04 | 47775E P## Entry Delay Default: See Program Record Sheet Selection: 5 seconds to 600 seconds Use this option to enter the amount of entry delay time that a user has after faulting a Controlled point ( P## Type 1, 2, 3 ) with a delayed response (D) ( P## Pt Re[...]

  • Page 84

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 84 Bosch Security Systems | 1/04 | 47775E If the point restores and the fire alarm is not silenced from the command center, the fire alarm output continues until Fire Bell time expires. If the point does not restore, the fire alarm output continues even after bell time expires. Use this opti[...]

  • Page 85

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 85 Bosch Security Systems | 1/04 | 47775E P## Buzz On Fault Default: Blank Selection: Blank, 1 to 3 Selection Operation for Controlled Points (Point Types 1, 2, and 3) Operation for 24-hour Points (Point Type 0) Blank The point only generates a buzz at the command center if it goes into the tr[...]

  • Page 86

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 86 Bosch Security Systems | 1/04 | 47775E P## RlyResp Type Default: See Program Record Sheet Selection: Blank, 1 to 2 Blank Point state does not affect the operation of the corresponding relay. 1 Relay Follow Point: The relay corresponding with this point activates when the point is faulted to[...]

  • Page 87

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 87 Bosch Security Systems | 1/04 | 47775E * Restoral Reports are still transmitted if the alarm, trouble, or bypass (by Sked, RAM, or Swinger bypass) condition occurred when the area disarmed, and the point restored. Allows a controlled point (P## Type 1, 2, 3), to report Alarms, Troubles, and[...]

  • Page 88

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 88 Bosch Security Systems | 1/04 | 47775E P## Bypassable Default: No Selection: Yes or No Yes This point can be bypassed and force armed. No This point cannot be bypassed or force armed from the command center or RAM. However, it can be force armed by automatic arming at the end of the Closing[...]

  • Page 89

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 89 Bosch Security Systems | 1/04 | 47775E P## Defer BP Report Default: No Selection: Yes or No Yes Send a Point Bypass Report with the Closing Report instead of a Command Bypass Report when a user bypasses the point. No Do not defer Bypass Reports. Use this option to prevent ( P## Type 0 to F [...]

  • Page 90

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 90 Bosch Security Systems | 1/04 | 47775E P## Fire Point Default: No Selection: Yes or No Yes This point is a Fire point. No This point is not a Fire point. Use this option to make a 24-hour point a Fire point. This option makes this point the highest priority event in the control panel when a[...]

  • Page 91

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 91 Bosch Security Systems | 1/04 | 47775E P## Alarm Verify Default: See Program Record Sheet Selection: Yes or No Yes Enable alarm verification on this point. Alarm verification points must be programmed as resettable. No Disable alarm verification on this point. Use this option only with Fire[...]

  • Page 92

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 92 Bosch Security Systems | 1/04 | 47775E P### Point Index Default: See Program Record Sheet Selection: Blank (00) to 31 This entry selects one of the 31 P## Index codes that define the point’s characteristics and determines how the control panel responds to various point conditions. Blank ([...]

  • Page 93

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 93 Bosch Security Systems | 1/04 | 47775E P### BFSK/Relay Default: See Program Record Sheet Selection: 0 to 9 Use this option to: 2. Determine the point number reported in BFSK when this point is tripped. 3. Activate a relay when the point goes into an alarm condition, even if the control pane[...]

  • Page 94

    D9412G/D7412G | Program Entry Guide | 4.0 RADXPNTS EN | 94 Bosch Security Systems | 1/04 | 47775E 4.3 COMMAND 7 and COMMAND 9 These entries assign point indexes, BFSK report code, BFSK relay that trips, and the text for the COMMAND 7 and COMMAND 9 command center functions. CMD7 Point Index Default: 31 Selection: Blank (00) to 31 This entry selects [...]

  • Page 95

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 95 Bosch Security Systems | 1/04 | 47775E 5.0 RADX S K E D 5.1 Windows Use this programming module to define the windows for Opening and Closing and User Access. 5.1.1 Opening and Closing Use these windows to set a schedule for disarming and arming. The disarming and arming schedules provide s[...]

  • Page 96

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 96 Bosch Security Systems | 1/04 | 47775E W# Monday Default: No Selection: Yes or No W# Tuesday Default: No Selection: Yes or No W# Wednesday Default: No Selection: Yes or No W# Thursday Default: No Selection: Yes or No W# Friday Default: No Selection: Yes or No W# Saturday Default: No Selecti[...]

  • Page 97

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 97 Bosch Security Systems | 1/04 | 47775E W# Open Window Stop Default: 00: 00 Selection: HH:MM (hours and minutes) Enter the time you want the control panel to end the Opening Window. The window stops at the end of the minute. 00:00 is midnight, 23:59 is 11:59 PM Make entries using a 24-hour c[...]

  • Page 98

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 98 Bosch Security Systems | 1/04 | 47775E Table 32: Programming for Two Same Day Opening Windows (see Figure 4 ) Open Close W# Day of Week Early Begin Start Stop Early Begin Start Stop eXcept On Holiday Holiday Index Area(s) 1 S M T W T F S 06: 00 07 : 00 08: 00 Yes / No 1 2 3 4 1 2 3 4 5 6 7 [...]

  • Page 99

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 99 Bosch Security Systems | 1/04 | 47775E Disable/Restart the control panel to activate today’s window. If you are programming a window that needs to activate on the same day that you are programming it, do a disable/restart after programming. W# Close Window Start Default: 00: 00 Selection:[...]

  • Page 100

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 100 Bosch Security Systems | 1/04 | 47775E W# Xept Holiday Default: No Selection: Yes or No Yes Do not activate this window on holidays. To use this selection, the window must be programmed to activate on at least one day of the week and a Holiday Index must be enabled. No A holiday does not p[...]

  • Page 101

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 101 Bosch Security Systems | 1/04 | 47775E Table 35: Opening/Closing Windows Worksheet Open Close W# Day of Week Early Begin Start Stop Early Begin Start Stop eXcept On Holiday Holiday Index Area(s) 1 S M T W T F S _ _ : _ _ _ _ : _ _ _ _ : _ _ _ _ : _ _ _ _ : _ _ _ _ : _ _ Yes No 1 2 3 4 1 2 [...]

  • Page 102

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 102 Bosch Security Systems | 1/04 | 47775E Table 38: Delivery Schedule* Open Close W# Day of Week Early Begin Start Stop Early Begin Start Stop eXcept On Holiday Holiday Index Area(s) 3 S M T W T F S 02 : 30 02 : 45 03 : 00 03 : 05 03: 15 03: 30 Yes No 1 2 3 4 1 2 3 4 5 6 7 8 00 : 00 01 : 00 Y[...]

  • Page 103

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 103 Bosch Security Systems | 1/04 | 47775E UW# Sunday Default: No Selection: Yes or No This prompt, and the next six day of the week prompts, select the days of the week that the User Group Window is active. 0101 0101 0101 See the W# Sunday prompt in Section 5.1.1 Opening and Closing instructi[...]

  • Page 104

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 104 Bosch Security Systems | 1/04 | 47775E Holiday Indexes for User Group Windows You can enable up to four Holiday Indexes to use with User Group Windows. Enable at least one Holiday Index if UW# Xept Holiday is programmed Yes for this user window, or if you want this window to activate only [...]

  • Page 105

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 105 Bosch Security Systems | 1/04 | 47775E S## Function Code Enter the function code you want this sked to execute. Sked Function 12 is reserved and is not a valid entry. The programmer automatically displays the available parameter choices and range fields for this function (such as, Yes/No i[...]

  • Page 106

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 106 Bosch Security Systems | 1/04 | 47775E S## Area 1[through 8] Yes Unbypass all points in Area #. 5 Unbypass All Points: This function is not available as a command center function. The entry in the S## Area # prompt defines the area(s) where the sked unbypasses all points. The sked unbypass[...]

  • Page 107

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 107 Bosch Security Systems | 1/04 | 47775E S## Defer Test Yes Defer the Test Report. Default: No Selection: Yes or No Enable sked to defer the Test Report No Send the Test Report on schedule. S## Hourly Report Yes Send the Test Report every hour. 9 Test Report: This function emulates the Send [...]

  • Page 108

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 108 Bosch Security Systems | 1/04 | 47775E S## Cmd Center Default: Blank (0) Selections: Blank (0), 1 to 8 Blank (0) No command center is specified for Custom Function activation. Identify the specific keypad (CC #) where the Custom Function is entered. Only one command center can be assigned [...]

  • Page 109

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 109 Bosch Security Systems | 1/04 | 47775E S## Cmd Center 1[through 8] Default: Blank Yes Watch tone sounds at this command center. 15 Sound Watch Tone at Command Center : This function sounds the Watch Tone at the command center address programmed in Parameter 1. The Watch Tone sounds at all [...]

  • Page 110

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 110 Bosch Security Systems | 1/04 | 47775E S## Door 1 [through 8] Default: No Yes Secure Door #. 19 Secure Door: This function emulates the SECURE? 12345678 command center function for securing a door. Selection: Yes or No Enable the sked to return the doors programmed Yes to the secured state[...]

  • Page 111

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 111 Bosch Security Systems | 1/04 | 47775E S## Door 1 [through 8] Default: No Yes Enable the reporting of No Entry Events for Door #. 24 No Entry Events Off: The control panel can log No Entry Events when an invalid token is detected for a specific door. No Entry Events include No Entry-Secure[...]

  • Page 112

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 112 Bosch Security Systems | 1/04 | 47775E S## Time Default: 00:00 Selection: HH:MM (hours and minutes) Enter the time that the sked executes. Make entries using a 24-hour clock (for example, 7:00 AM is entered as 07:00, 2:45 PM is entered as 14:45). Disabled skeds have a blank time. If you co[...]

  • Page 113

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 113 Bosch Security Systems | 1/04 | 47775E S## Xept Holiday Default: No Selection: Yes or No Yes Prevent this sked from operating on the holidays identified in the specific Holiday Index(es) used with this sked. Specific Holiday Indexes are selected in this programming section and programmed i[...]

  • Page 114

    D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED EN | 114 Bosch Security Systems | 1/04 | 47775E Holiday Index 1 Default: No Selection: Yes or No Yes Use this date in Holiday Index 1. No Do not use this date in Holiday Index 1. Holiday Index 2 Default: No Selection: Yes or No Holiday Index 3 Default: No Selection: Yes or No Holiday Index 4 Defaul[...]

  • Page 115

    D9412G/D7412G | Program Entry Guide | 6.0 RADXAUX1 EN | 115 Bosch Security Systems | 1/04 | 47775E 6.0 RADX AUX1 6.1 Introduction The RADXAUX1 Handler is primarily used for programming Enhanced Communication capabilities for the 9000 Series Control Panels. As new features (that require new programmable prompts) are added, they will most likely be a[...]

  • Page 116

    D9412G/D7412G | Program Entry Guide | 6.0 RADXAUX1 EN | 116 Bosch Security Systems | 1/04 | 47775E 9133 Supervision Default: No Selection: Yes or No Yes Supervise the D9133 Serial Interface Module. No Do not supervise the D9133 Serial Interface Module. This item determines whether the D9133 Serial Interface Module is supervised or not. If the D9133[...]

  • Page 117

    D9412G/D7412G | Program Entry Guide | 6.0 RADXAUX1 EN | 117 Bosch Security Systems | 1/04 | 47775E • Provide for local programming by a D9133 Serial Interface Module. Although not listed in this section, RPS still checks for the RAM Passcode (see Section 2.7 RAM Parameters ), Datalock Code, and the control panel type to determine if this RAM sess[...]

  • Page 118

    D9412G/D7412G | Program Entry Guide | 6.0 RADXAUX1 EN | 118 Bosch Security Systems | 1/04 | 47775E When configuring this item to allow for local programming, the D9133 needs Jumper 8 shorted, power must be cycled after changing the address, and a standard serial modem cable is required. Call Back Enabled Default: No Selection: Yes or No Yes When th[...]

  • Page 119

    D9412G/D7412G | Program Entry Guide | 6.0 RADXAUX1 EN | 119 Bosch Security Systems | 1/04 | 47775E Both the U.S.Robotics V.92 56 K Modem (model # 5686, includes V.92 and V.90 56 K standard technology) and the Best Data Smart One V.92/V.44 56 K External Data/Fax Modem (model # 56SX-92) are recommended for use as external modems (connected to the con[...]

  • Page 120

    D9412G/D7412G | Program Entry Guide | 6.0 RADXAUX1 EN | 120 Bosch Security Systems | 1/04 | 47775E Figure 7: Com Port Selection within HyperTerminal Figure 8: External Modem Connection P3 P2 1248 SE RR XTXRXT XBUS SDI PWR SDI A SDI B SDI COM D913 3DC 1 2 3 2 5 6 4 1 - RPS Remote Account Manager 2 - Modem 3 - PSTN 4 - D9412G/D7412G Control Panel 5 -[...]

  • Page 121

    D9412G/D7412G | Program Entry Guide | 6.0 RADXAUX1 EN | 121 Bosch Security Systems | 1/04 | 47775E In order to use an off-the-shelf external modem an d a D9133DC serial module to connect to the control panel using RAM, use the following settings: 1. RADXAUX1ENHANCED COMMEnhanced CommNo 2. RADXAUX1SDI RAM PARAMETERSEnable SDI RAMYes 3. RADXAUX[...]

  • Page 122

    D9412G/D7412G | Program Entry Guide | 6.0 RADXAUX1 EN | 122 Bosch Security Systems | 1/04 | 47775E Enable Ext Modem Default: No Selection: Yes or No Yes Enable SDI Address 88 for use with an external modem. No Disable SDI Address 88 for use with an external modem. Setting this item to Yes instructs the control panel that SDI Address 88 is enabled f[...]

  • Page 123

    D9412G/D7412G | Program Entry Guide | 6.0 RADXAUX1 EN | 123 Bosch Security Systems | 1/04 | 47775E Enhanced Comm Default: No Selection: Yes or No Yes Enable enhanced communications over the SDI bus. No Do not enable enhanced communications over the SDI bus. Determines if the control panel allows enhanced communications over the SDI bus. 0101 0101 0[...]

  • Page 124

    D9412G/D7412G | Program Entry Guide | 6.0 RADXAUX1 EN | 124 Bosch Security Systems | 1/04 | 47775E This prompt and the next two prompts determine how the SDI Path is supervised between the SDI device and the central station(s). Do not confuse with the supervision of the SDI device (the connection of the SDI device to the 9000 series control panel).[...]

  • Page 125

    D9412G/D7412G | Program Entry Guide | 6.0 RADXAUX1 EN | 125 Bosch Security Systems | 1/04 | 47775E Once the control panel receives acknowledgement from the central station, the control panel returns to the normal Poll Rate (which, in this example is 120 seconds). If more than one SDI Path is used, the control panel handles them on a successive basi[...]

  • Page 126

    D9412G/D7412G | Program Entry Guide | 6.0 RADXAUX1 EN | 126 Bosch Security Systems | 1/04 | 47775E Parity/Stop Default: No/1 Selection: No/1, No/2, Odd/1, Even/1 No/1 No parity, 1 stop bit. No/2 No parity, 2 stop bits. Odd/1 Odd parity, 1 stop bit. Even/1 Even parity, 1 stop bit. This prompt addresses two items: Parity and the number of stop bits f[...]

  • Page 127

    D9412G/D7412G | Program Entry Guide | 6.0 RADXAUX1 EN | 127 Bosch Security Systems | 1/04 | 47775E RG# 1 Attempt Default: No Selection: Yes or No Yes This route group attempts the primary destination once and, if unsuccessful, attempts the backup destination. The control panel still makes a total of ten attempts (five to the primary, five to the ba[...]

  • Page 128

    D9412G/D7412G | Program Entry Guide | 6.0 RADXAUX1 EN | 128 Bosch Security Systems | 1/04 | 47775E This item determines if a fire trouble condition, previously acknowledged and silenced at a command center, automatically (locally) resounds the fire trouble tone at 12:00 PM, 12:00 AM, or not at all if the point is still in an off-normal state. Event[...]

  • Page 129

    D9412G/D7412G | Program Entry Guide | 6.0 RADXAUX1 EN | 129 Bosch Security Systems | 1/04 | 47775E Conversely, if a single Cross Point detects an alarm, then restores, and no other conditions occur, an Unverified Event is generated for that point. A second alarm on the first point does not create an Alarm Event but rather an Unverified Event. Secti[...]

  • Page 130

    D9412G/D7412G | Program Entry Guide | 6.0 RADXAUX1 EN | 130 Bosch Security Systems | 1/04 | 47775E Notes[...]

  • Page 131

    D9412G/D7412G | Program Entry Guide | 7.0 RADXAXS EN | 131 Bosch Security Systems | 1/04 | 47775E 7 . 0 RAD XAXS 7.1 Door Profile This programming category is used to: • Assign an area, that also activates the D9210B • Assign a point to the door • Program the door state to change when the arm state changes • Allow for the Strike relay to ac[...]

  • Page 132

    D9412G/D7412G | Program Entry Guide | 7.0 RADXAXS EN | 132 Bosch Security Systems | 1/04 | 47775E D# Interlock Point Default: Blank Selection: Blank, 1 to 127, 129 to 247 1 to 127, 129 to 247 The point number assigned to the Interlock point. Points 128 and 248 are reserved by the control panel for internal use. Blank There is no point number assign[...]

  • Page 133

    D9412G/D7412G | Program Entry Guide | 7.0 RADXAXS EN | 133 Bosch Security Systems | 1/04 | 47775E D# Card Type Default: 0 Selection: 0 to 3 0 Card format is 26-bit Wiegand. 3 Do not use. This item must be kept to a value of 0 (26 bit Wiegand format). 7.2 Strike Profile This programming category is used to create a specific door profile for: • Str[...]

  • Page 134

    D9412G/D7412G | Program Entry Guide | 7.0 RADXAXS EN | 134 Bosch Security Systems | 1/04 | 47775E D# Deact On Open? Default: Yes Selection: Yes or No Yes Strike deactivates when the door is opened after a valid Access Granted request. No Strike remains activated for the amount of the programmed strike time whether door is opened or closed. Determin[...]

  • Page 135

    D9412G/D7412G | Program Entry Guide | 7.0 RADXAXS EN | 135 Bosch Security Systems | 1/04 | 47775E D# Access Granted? Default: No Selection: Yes or No Yes Access Events from this door controller are sent to the control panel for processing. No Access Events from this door controller are not sent to the control panel for processing. This program item[...]

  • Page 136

    D9412G/D7412G | Program Entry Guide | Programming Prompts Directory EN | 136 Bosch Security Systems | 1/04 | 47775E Programming Prompt s Direct ory 9000MAIN ............................................................. 11 Phone............................................................... 11 Phone 1 ................................................[...]

  • Page 137

    D9412G/D7412G | Program Entry Guide | Programming Prompts Directory EN | 137 Bosch Security Systems | 1/04 | 47775E Area Parameters ........................................... 34 Area Parameters ............................................. 34 Area ........................................................... 34 A# Area On ...........................[...]

  • Page 138

    D9412G/D7412G | Program Entry Guide | Programming Prompts Directory EN | 138 Bosch Security Systems | 1/04 | 47775E User Cmd 7 .............................................. 57 User Cmd 9 .............................................. 57 Bypass a Pt ............................................... 57 Unbypass a Pt ...................................[...]

  • Page 139

    D9412G/D7412G | Program Entry Guide | Programming Prompts Directory EN | 139 Bosch Security Systems | 1/04 | 47775E Panel-Wide Relays ......................................... 71 AC Failure ................................................ 71 Battery Trouble ........................................ 71 Phone Fail .....................................[...]

  • Page 140

    D9412G/D7412G | Program Entry Guide | Programming Prompts Directory EN | 140 Bosch Security Systems | 1/04 | 47775E W# Close Window Start ........................ 99 W# Close Window Stop ......................... 99 W# Xept Holiday .................................. 100 W# Holiday 1 ........................................ 100 W# Holiday 2 ........[...]

  • Page 141

    D9412G/D7412G | Program Entry Guide | Programming Prompts Directory EN | 141 Bosch Security Systems | 1/04 | 47775E RADXAUX1 ........................................................ 115 SDI Automation .......................................... 115 Enable SDI Auto ................................... 115 Baud Rate ....................................[...]

  • Page 142

    © 2003 Bosch Security Systems 47775E Bosch Security Systems 130 Perinton Parkway Fairport, NY 14450-9199 Customer Service: (800) 289-0096 Technical Support: (888) 886-6189[...]