Black Box A/S-4 manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88

Aller à la page of

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Black Box A/S-4. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Black Box A/S-4 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Black Box A/S-4 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Black Box A/S-4 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Black Box A/S-4
- nom du fabricant et année de fabrication Black Box A/S-4
- instructions d'utilisation, de réglage et d’entretien de l'équipement Black Box A/S-4
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Black Box A/S-4 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Black Box A/S-4 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Black Box en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Black Box A/S-4, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Black Box A/S-4, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Black Box A/S-4. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500 ) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation , 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com CUSTOMER SUPPORT INFORMATION A UGUST 1[...]

  • Page 2

    FCC ST A TEMENT 1 FEDERAL COMMUNICA TIONS COMMISSION AND INDUSTR Y CANADA RADIO FREQUENCY INTERFERENCE ST A TEMENTS This equipment generates, uses, and can radiate radio-frequency energy , and if not installed and used properly , that is, in strict accordance with the manufacturer’ s instructions, may cause inter ference to radio communication. I[...]

  • Page 3

    PROTOCOL CONVER TER MODEL A/S-4 2 INSTRUCCIONES DE SEGURIDAD (Normas Oficiales Mexicanas Electrical Safety Statement) 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las adv[...]

  • Page 4

    TRADEMARKS 3 TRADEMARKS USED IN THIS MANUAL Any trademarks mentioned in this manual are acknowledged to be the pr oper ty of the trademark owners.[...]

  • Page 5

    PROTOCOL CONVER TER MODEL A/S-4 4 Contents Chapter Page 1. General Information ................................................................................................................................6 2. A/S-4 Specifications .....................................................................................................................[...]

  • Page 6

    CONTENTS 5 Chapter Page 6.12 Printer Options ..........................................................................................................................45 6.13 V erify Switch Settings ................................................................................................................49 6.14 Reload Default Options ........[...]

  • Page 7

    PROTOCOL CONVER TER MODEL A/S-4 6 1. General Information THE A/S-4 is an SNA protocol converter . It is capable of a wide variety of conversions and adaptation tasks. Listed below are just a few of the tasks the A/S-4 was designed to per form: • Bit-oriented protocol, SDLC • Byte-oriented protocol, ASCII • Serial Data T ransfer and Conversion[...]

  • Page 8

    CHAPTER 1:General Information 7 The A/S-4 is a 3274 work-alike controller emulating a PU2 with one LU2 terminal and one LU1 or LU3 printer . This allows an ASCII terminal or micro computer to emulate a 3278 CRT with a 3278 printer . The A/S-4 will also emulate SNA/SDLC 3776 or 3777 work station with one LU1 console, printer , card reader , card pun[...]

  • Page 9

    PROTOCOL CONVER TER MODEL A/S-4 8 2. Specifications Standard and Nonstandard Baud Rates: 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2000, 2400, 3600, 4800, 7200, 9600, 19.2 kbps Connectors: All ports: DB25 (25-pin female) Indicators: Power T erminal T ransmit Data T erminal Receive Data T erminal Carrier Detect T erminal Clear -to-Send Modem T ra[...]

  • Page 10

    CHAPTER 3: Installation 9 3. Installation 3.1 General Installation The A/S-4’ s options are set by the operator through the use of menus and switches. The A/S-4 provides a very flexible package of options so as to work with any terminal or terminal emulating device (such as a personal computer). Due to the great numbers of options provided, it ma[...]

  • Page 11

    PROTOCOL CONVER TER MODEL A/S-4 10 3.4 Power T ransformer The A/S-4 is shipped with a transformer for the standard USA 110-V AC outlet plug. A substitute transformer may be ordered for the for 220 V AC or other voltages. A conversion plug for different power outlets is the responsibility of the purchaser . 3.5 Synchronizer The A/S-4 has a unique fe[...]

  • Page 12

    CHAPTER 4: Switches 11 4. Switches The A/S-4 is equipped with 8 banks of DIP switches, all of which are accessed from the bottom of the unit. The general functions of these switches are as follows: Terminal Interface Configuration SW2, SW3, SW6 Terminal Speed SW6 Modem Interface Configuration SW4, SW5, SW7 Terminal Data Formats & Options SW9 Sp[...]

  • Page 13

    PROTOCOL CONVER TER MODEL A/S-4 12 Switch Bank S3, Switch: 1-On connects pin 2 of connector to A/S-4’ s output of T ransmit Data, for attaching DCE devices 2-On connects pin 3 of connector to A/S-4’ s output of T ransmit Data, for attaching DTE devices 3-On connects pin 2 of connector to A/S-4’ s input of Receive Data, for attaching DTE devic[...]

  • Page 14

    CHAPTER 4: Switches 13 7 8 9 10 BAUD RATE ON ON ON ON 50 ON ON ON OFF 75 ON ON OFF ON 110 ON ON OFF OFF 134.5 ON OFF ON ON 150 ON OFF ON OFF 300 ON OFF OFF ON 600 ON OFF OFF OFF 1200 OFF ON ON ON 1800 OFF ON ON OFF 2000 OFF ON OFF ON 2400 OFF ON OFF OFF 3600 OF OFF ON ON 4800 OFF OFF ON OFF 7200 OFF OFF OFF ON 9600 OFF OFF OFF OFF 19.2K[...]

  • Page 15

    PROTOCOL CONVER TER MODEL A/S-4 14 4.2 How to Set T erminal Port Switches for Different Devices DEVICES VDU or Async Modem Centronics Tally printer “Y” VDU, DTE or DCE device Printer Data Products Printer (Busy on 20) (Busy on 19) Cable Switch 2 Switch 2 Switch 2 Switch 2 Switch 2 1 OFF 1 OFF 1 OFF 1 OFF 1 OFF 2 OFF 2 ON 2 OFF 2 OFF 2 OFF 3 OFF[...]

  • Page 16

    CHAPTER 4: Switches 15 SW6/ 7 8 9 10 BA UD RA TE ON ON ON ON 50 ON ON ON OFF 75 ON ON OFF ON 110 ON ON OFF OFF 134.5 ON OFF ON ON 150 ON OFF ON OFF 300 ON OFF OFF ON 600 ON OFF OFF OFF 1200 OFF ON ON ON 1800 NOTE: Baud Rate OFF ON ON OFF 2000 selection has no OFF ON OFF ON 2400 effect if T erminal OFF ON OFF OFF 3600 Speed Detect is selected. OFF O[...]

  • Page 17

    PROTOCOL CONVER TER MODEL A/S-4 16 Switch Bank S5, Switch: 1-On connects pin 2 of connector to A/S-4’ s output of T ransmit Data, for attaching DCE devices 2-On connects pin 3 of connector to A/S-4’ s output of T ransmit Data, for attaching DTE devices 3-On connects pin 2 of connector to A/S-4’ s input of Receive Data, for attaching DTE devic[...]

  • Page 18

    CHAPTER 4: Switches 17 4.4 How to Set Modem Port Switches for Different Devices DEVICES ASYNC MODEM SYNC MODEM FRONT END PR OCESSOR Switch 4 Switch 4 Switch 4 1 OFF 1 OFF 1 OFF 2 ON 2 ON 2 OFF 3 OFF 3 OFF 3 OFF 4 OFF 4 OFF 4 OFF 5 OFF 5 OFF 5 ON 6 ON 6 ON 6 ON 7 OFF 7 OFF 7 ON 8 OFF 8 ON 8 ON Switch 5 Switch 5 Switch 5 1 ON 1 ON 1 OFF 2 OFF 2 OFF 2[...]

  • Page 19

    PROTOCOL CONVER TER MODEL A/S-4 18 4.5 Option Switches Switch Bank S8, Switch: 1-RESERVED 2-RESERVED 3-RESERVED 4-RESERVED 5-RESERVED 6-RESERVED 7-RESERVED 8-RESERVED 9-On connects pins 9 on both terminal and modem connectors to +10 V olts DC. 10-On connects pins 10 on both terminal and modem connectors to -10 V olts DC. Switch Bank S9, Switch: Swi[...]

  • Page 20

    CHAPTER 5: LED Indicator 19 5. LED Indicator The front of A/S-4 enclosure provides 10 light emitting diodes (LED) indicators. The indicators are arranged and labeled in the following order , from left to right. TTX T erminal T ransmit Data TRX T erminal Receive Data TCD T erminal Carrier Detect TCTS T erminal Clear T o Send ERROR Error Condition PO[...]

  • Page 21

    PROTOCOL CONVER TER MODEL A/S-4 20 6. Power Up and Configuration Menu Operations The A/S-4 unit options are mainly set by the operator through the use of menus. The A/S-4 provides a very flexible package of options so to allow any VDU to operate like an IBM 3278 terminal and an IBM 3287 printer or a 3770 work station. Because of the great numbers o[...]

  • Page 22

    CHAPTER 6: Power Up and Configuration Menu Options 21 6.2 Power Up Message The A/S-4 sends out the message in Figure 1 on power up or the raising of DTR (DA T A TERMINAL READY) on the terminal device. This message informs the operator that the A/S-4 is ready to try to match the operator’ s terminal or terminal emulation package with the VDU (VISU[...]

  • Page 23

    PROTOCOL CONVER TER MODEL A/S-4 22 6.3 A/S-4 Main Menu A set of menus are used to configure the A/S-4’ s options so that it will operate properly with the particular VDU and host to which it is connected. In order to access these menus, SW9/6 must be in the ON position (see Section 4.5). All options are stored in battery-protected RAM so that the[...]

  • Page 24

    CHAPTER 6: Power Up and Configuration Menu Options 23 The input allowed at this menu is one letter A thru J so to run or change an option. Listed below is a brief description of what each letter gives you access to, refer to the section listed for more details. Letter Section Description A 6.4 Run A/S-4 as options are currently set. B 6.5 Change in[...]

  • Page 25

    PROTOCOL CONVER TER MODEL A/S-4 24 2. Modem connected to host but LU inactive; if the LU is inactive the A/S-4 will display “W AITING FOR LU TO COME ACTIVE”. The LU should come active after a few seconds of this message appearing on the VDU. If the LU does not come active, then one of the following problems may exist: A. Host is not polling PU [...]

  • Page 26

    CHAPTER 6: Power Up and Configuration Menu Options 25 6.5 Changing the VDU T ype If the current VDU type displayed at the top of the A/S-4 Main Menu does not match the VDU or VDU emulation package you have connected to the A/S-4, you may change the VDU type by entering the letter “B” in response to the Main Menu. The change VDU Menu will then b[...]

  • Page 27

    PROTOCOL CONVER TER MODEL A/S-4 26 NOTE Selection of a blank pr ogrammable VDU type ma y cause erroneous command character s to be sent to the operators VDU . The programmable VDU type should be added b y option 3 before it is selected. 3. Add or Change Name - by entering a 3 the operator is able to add a name to or change a name from the “PROGRA[...]

  • Page 28

    CHAPTER 6: Power Up and Configuration Menu Options 27 6.6 Changing VDU Commands for the VDU T ype Selected By selecting item C from the main menu (Section 6.3), the operator obtains the menu shown in figure 5. Items from this menu can only be changed for programmable VDUs. This menu allows you to define the video commands our VDU expects. Y ou shou[...]

  • Page 29

    PROTOCOL CONVER TER MODEL A/S-4 28 6.7 Changing Video Attributes and Commands for VDU The menu obtained by selecting item D of the main menu is shown in Figure 7. This menu allows the operator to define the parameters which will give the proper video highlighting to the fields on the VDU screen. CURRENT: Application = SDLC/SNA 3274/76 Interactiv e [...]

  • Page 30

    CHAPTER 6: Power Up and Configuration Menu Options 29 The general format of a video command to a VDU is as follows: ESC X Y Z Start of video cmd. Middle of video cmd. nd of video cmd. X, Y and Z represent ASCII characters. The end of video command may not be necessary and therefore displayed as a blank. Items B, C and E through M can be defined usi[...]

  • Page 31

    PROTOCOL CONVER TER MODEL A/S-4 30 A/S-4 Standard Keyboard Layout ESC ! 1 @ 2 # 3 $ 4 % 5 ^ 6 & 7 * 8 ( 9 )0 _ - + = DEL LINE TAB Q W E R T Y U I O P { [ } ] RETURN PFI PF2 PF3 PF4 PF5 PF6 PF7 PF8 PF9 PF10 DISC FIELD DUP UP HOME CUR VDC MARK ARROW SEL CTRL LOCK A S D F G H J K L : ; " ' | PF11 PF12 PF13 PF14 PF15 PF16 PF17 PF18 PF19[...]

  • Page 32

    CHAPTER 6: Power Up and Configuration Menu Options 31 IBM PC Keyboard Layout ~ ` ! 1 @ 2 # 3 $ 4 % 5 -- 6 & 7 * 8 ( 9 ) 0 _ - + = PF1 PF2 PF3 PF4 PF5 PF6 PF7 PF8 PF9 PF10 PF11 PF12 QW E R T Y UI OP! |[...]

  • Page 33

    PROTOCOL CONVER TER MODEL A/S-4 32 ADM 1178 Keyboard Layout[...]

  • Page 34

    CHAPTER 6: Power Up and Configuration Menu Options 33 IBM 3101 Keyboard Layout[...]

  • Page 35

    PROTOCOL CONVER TER MODEL A/S-4 34 PNS Keyboard Layout[...]

  • Page 36

    CHAPTER 6: Power Up and Configuration Menu Options 35 6.8 Changing Keyboard Layout T ype By selecting E from the main menu, the menu shown in Figure 8 is obtained. This is used to select the specific keyboard mapping the operator desires. Selection of F , G and H provide fixed keyboards shown on the previous pages. Programmable keyboards may be add[...]

  • Page 37

    PROTOCOL CONVER TER MODEL A/S-4 36 6.9 Changing Keys Arrangements on a Particular Keyboard Layout T ype Selection of item F from the main menu will cause the menu shown in Figure 9 to be displayed. CURRENT: Application = SDLC/SNA 3274/76 Interactiv e VDU = ANSI STD; DEC VT100; T eletype 5410, 5420; T ele video 970, 960 K eyboard = ST AND ARD A-Exit[...]

  • Page 38

    CHAPTER 6: Power Up and Configuration Menu Options 37 6.9.1 PF K EYS Selection of item B from the menu shown in Figure 9 will cause the menu shown in Figure 10 to be displayed. If the operator wants to use a different key for PF2, he would first enter the letter “C” and then enter the new value(s) in response to prompt(S) for the new value(s). [...]

  • Page 39

    PROTOCOL CONVER TER MODEL A/S-4 38 6.9.2 P A K EYS Selection of item C from the menu shown in figures 9 will cause the menu shown in figure 11 to be displayed. Keys changes are per formed in the same manner as the PF key changes. CURRENT: Application = SDLC/SNA 3274/76 interactiv e VDU = ANSI STD; DEC VT100; T eletype 5410, 5420; T ele video 970, 9[...]

  • Page 40

    CHAPTER 6: Power Up and Configuration Menu Options 39 6.9.4 IBM K EYS Selection of item E from the menu shown in figure 9 will cause the menu shown in figure 13 to be displayed. Key changes are per formed in the same manner as the PF key changes. CURRENT: Application = SDLC/SNA 3274/76 Interactiv e VDU = ANSI STD; DEC VT100; T eletype 5410, 5420; T[...]

  • Page 41

    PROTOCOL CONVER TER MODEL A/S-4 40 The functions of the A/S-4 Keys are as follows: Restart Protocol Jump to A/S-4’ s main menu for Converter option changes. Disconnect VDU Causes A/S-4 to drop DTR to device connected to terminal port. Used to disconnect a modem attached to the terminal port in a dial-up configuration Disconnect SDLC Causes A/S-4 [...]

  • Page 42

    CHAPTER 6: Power Up and Configuration Menu Options 41 6.10 Changing Application The A/S-4 is shipped from the factory to power up in the SDLC/SNA 3274/76 Interactive mode of operation. The current mode of operation can be determined by looking at the top of the main menu, as in Figure 14 (it is Interactive). T o change to Batch operation, the opera[...]

  • Page 43

    PROTOCOL CONVER TER MODEL A/S-4 42 6.11.1 C HANGING I NTERACTIVE A PPLICA TION O PTIONS The change Application menu allows 8 operations as described below: A. Exit - By entering the letter A the A/S-4 will return to the Main Menu. B. XID - By entering a B the operator is able to change the A/S-4 SDLC control unit identifier . Only hexadecimal numbe[...]

  • Page 44

    CHAPTER 6: Power Up and Configuration Menu Options 43 G. PR T LU Addr - By entering a G the operator can select which LU’ s data will go to the printer attached to the A/S-4’ s terminal port. Selection of this address is done the same as for the VDU LU addr above. H. PR T LU T ype - The printer LU type is changed by entering the letter H which [...]

  • Page 45

    PROTOCOL CONVER TER MODEL A/S-4 44 6.11.2 C HANGING B A TCH A PPLICATION O PTIONS The change Application menu allows 16 operations as described below: A thru G - are the same as for changing Interactive options, refer to section 6.11.1 for details. H. Start of File - By entering an H the operator can select the first character that must be received[...]

  • Page 46

    CHAPTER 6: Power Up and Configuration Menu Options 45 N. VDU Auto Logon Msg - This 80 character message can be changed by entering the letter N followed by the Logon message, containing any printable ASCII character (X`20’-X`7F’). The field separator (X`1C’) character , which is used to delimit the different logon strings for the VDU LU and t[...]

  • Page 47

    PROTOCOL CONVER TER MODEL A/S-4 46 These new values, if received from the host would then be sent to the printer if the G-Start Char -FORMS or K-Start Char -DENSITY are selected. CURRENT: Application = SDLC/SNA 3274/76 Interactiv e VDU = ANSI STD; DEC VT100; T eletype 5410,5420; T ele video 970,960 K eyboard = ST AND ARD Change: Printer Options A-E[...]

  • Page 48

    CHAPTER 6: Power Up and Configuration Menu Options 47 D. Lines Per Inch (xxx) - By entering the letter D, followed by any decimal number from 001 to 063, the operator can change the lines per inch (LPI) the printer will print. If a decimal value larger than 063 is entered, the LPI option will be set to a value less than 063. The host Set Line Densi[...]

  • Page 49

    PROTOCOL CONVER TER MODEL A/S-4 48 P ROGRAMMABLE P RINTER O PTIONS Print data received from the host or printed by a local print function will be formatted by the values set in the Printer Options menu (e.g. Column Width, Lines Per Page, Single spacing). The A/S-4 is capable of having numerous printer options changed while communicating with a host[...]

  • Page 50

    CHAPTER 6: Power Up and Configuration Menu Options 49 The following is an example of setting the printer for 8 lines per inch. ESC, 8 - OKI Microline 83A command to set 8 LPI Printer Options Menu settings: H-Multiple-(`xxx’ X inches)-xxx=001 K-Start Char -DENSITY=ESC L-Separator Char -DENSITY=CTL @ M-Final Char -DENSITY=CTL @ ESC,[,90, ,G - GENIC[...]

  • Page 51

    PROTOCOL CONVER TER MODEL A/S-4 50 The V erify Switch Settings menu allows 2 operations as described below: A. Exit - By entering the letter A the A/S-4 will return to the Main Menu. B. Restart With New Switch Options - When a B is typed and he A/S-4 will start over , just like the power has been turned off and then on. When the A/S-4 goes through [...]

  • Page 52

    CHAPTER 7: Interactive Operation 51 7. Interactive Operation The A/S-4 operating in the Interactive mode, emulates an IBM 3274/76 cluster controller with a single LU T ype 2 terminal IBM 3278 and an IBM 3287 LU T ype 1 or 3 printer . The VDU LU assigned by the H- Application Option menu is the terminal’ s (IBM 3278) logical unit and the PR T LU i[...]

  • Page 53

    PROTOCOL CONVER TER MODEL A/S-4 52 8. Batch Operation The A/S-4 operating in the Batch mode, emulates an IBM 3776/77 Model 3 and 4 multiple logical unit (MLU) work station with a console, printer , card reader/punch and exchange diskette attached. The A/S-4 supports two of the six possible logical units available for a MLU work station. The VDU LU [...]

  • Page 54

    CHAPTER 8: Batch Operation 53 8.1 Receiving Batch Data from the SNA host When SNA data is received from the host by the A/S-4, the data is sent to the VDU as follows: Star t Special End of VDU CMD De vice On of File Control File VDU 1 2 3 STX 4 5 Data 6 ETX 1 CMD De vice Off 7 1. VDU CMD or CR T lead in character is selected by C-VDU commands menu.[...]

  • Page 55

    PROTOCOL CONVER TER MODEL A/S-4 54 b. SI ($0F) character precedes the SNA line status report of each logical unit. This line status is handled as console data so the VDU CMD and device selection are not sent along with this message. The line status is reported as follows: SOF SC 1 2 3 4 EOF STX 0F 3 3 CR LF LU , LU CR LF ETX Character Number: 1. 0 [...]

  • Page 56

    CHAPTER 8: Batch Operation 55 8.2 T ransmitting Batch Data to the SNA Host T o send data to the SNA computer , the data from the VDU should look like this: Device Selection Start or End of Special of File Control File 1 STX 2 3 Data 4 ETX 1. Start of File (SOF) character is selected by H Application Options menu. This single character command can b[...]

  • Page 57

    PROTOCOL CONVER TER MODEL A/S-4 56 2) SI (X`0F’) character asks the A/S-4 for the SNA line status of each Logical Unit. The response to the SI is described in the transmission of the SI character as a special control character . Any data following the SI character will be thrown away until a Start of File is received. The SI (X`0F’) character d[...]

  • Page 58

    CHAPTER 8: Batch Operation 57 When sending data to the printer each character is inspected and then sent if needed. A column count is kept to determine the position of the printer’ s print head which is compared to the selected column width of the paper . If a space character is found, it is not sent right away to the printer . The following char[...]

  • Page 59

    PROTOCOL CONVER TER MODEL A/S-4 58 8.4 Batch Default Options The A/S-4 has the capability of loading all it’ s Batch options from the VDU (computer) without going through any menus. This is done by receiving the shift out (X’0E;) character followed by the options selected in hexadecimal form. The VDU and A/S-4 must be set to receive and transmi[...]

  • Page 60

    CHAPTER 8: Batch Operation 59 BYTE DEF AUL T (continued) 14 01 LU ADDRESS CUSTOMER OPTION A 15 81 BIT 7 - TERMINA TE MESSAGE TO VDU ON: 1-END OF CHAIN 0-END OF BRACKET 6 - SEND FMH-2 TO VDU 5 - 4 - 3 - 2 - 1 - 1-1ST CHAR FROM VDU DEVICE INDICA TOR 0-CARD ONLY INPUT FROM VDU 0 - ECHO INPUT TO VDU CUSTOMER OPTIONS B 16 21 BIT 7 - 6 - 5 - USE DLE (X?[...]

  • Page 61

    PROTOCOL CONVER TER MODEL A/S-4 60 BYTE DEF AUL T (continued) 3 - 2 - 1 & 0 - LU TYPE (1, 2, OR 3) 24 08 PROTOCOL, 08=ASYNC ASCII *** INBOUND LU XFR *** 25 00 CHAR OPTION (NOT USED) 26 03 LU ADDRESS (NOT USED) CUSTOMER OPTION C 27 00 BIT 7 - 6 - 5 - 4 - 3 - 2 - 1 - 0 - CUSTOMER OPTION D 28 01 BIT 7 - 6 - 5 - 4 - 3 - 2 - 1 & 0 - LU TYPE (NOT[...]

  • Page 62

    CHAPTER 8: Batch Operation 61 BYTE DEF AUL T (continued) 3 - 2 - 1 & 0 - LU TYPE (NOT USED) *** APPLICA TION OPTIONS *** 33 C553 DEF AUL T CR T = ASCII ST ANDARD, VT100 C513 = IBM 3101 C5D3 = LEAR SIEGLER ADM 3A C593 = TELEVIDEO 910 THRU 950 C613 = IBM PC 3270 35 C26B DEF AUL T KYBD = ST ANDARD C2F3 = IBM PC 3270 C403 = IBM 3101 C37B = ADM 1178[...]

  • Page 63

    PROTOCOL CONVER TER MODEL A/S-4 62 BYTE DEF AUL T (continued) 217 20 2nd Start Char-DENSITY 218 20,20 Multiple character 220 00 Separator Char (FORMS) 221 00 Separator Char-DENSITY 222 00 Final Char (FORMS) 223 00 Final Char-DENSITY *** END OF OPTIONS ***[...]

  • Page 64

    CHAPTER 9: Batter y RAM 63 9. Batter y RAM All operating parameters selected from the configuration menus are saved in battery backed-up RAM (Random Access Memory). Therefore, if AC power to the A/S-4 is interrupted, it is unnecessar y to reenter the parameters previously selected. If the unit is powered off for seven days or more, the parameters w[...]

  • Page 65

    PROTOCOL CONVER TER MODEL A/S-4 64 10. Maintenance The A/S-4 is designed to per form all of its tasks with maintenance free operation. Y ou may prolong the life of the unit by cleaning any dust build-up in the unit. Dust may be removed by blowing and/or brushing with a long bristle paint brush. 1. Check to see if the power indicator light is ON: Ma[...]

  • Page 66

    CHAPTER 11: Software Upgrade and EPROM Replacement 65 11. Software Upgrade and EPROM Replacement Each EPROM has a label affixed to the top containing an address and the current data of the software in the IC. T o replace the old EPROM with the new EPROM, follow the procedure below: 1. Unplug the A/S-4 and remove the cover by removing the 4 cover sc[...]

  • Page 67

    PROTOCOL CONVER TER MODEL A/S-4 66 12. System/Line Gen for Batch The following is a VT AM/NCP/JES2 line gen for a 3776 model 3 or 4. For more information on specific parameters, refer to the appropriate IBM manuals. IBM 3770 SNA Installation Guide - GC30-3064 Component Description for the IBM 3776 and 3777 Communication T erminals - GA27-3145 VT AM[...]

  • Page 68

    CHAPTER 12: System/Line Gen for Batch 67 TRANSFER = 7 MODET AB = INSTINCLM Name of table used by VT AM for line bind parameters SSCPFM = USSSCS 3770 RJE log-on is a character -coded log-on VP ACING = 2 —————- PU MACRO —————- ADDR = C1 Line hardware hex address value IRETR Y = YES Retry poll operation on idle PU, maybe no MAXDA T[...]

  • Page 69

    PROTOCOL CONVER TER MODEL A/S-4 68 USST AB = RJEINCDT T able used by VT AM to interpret user logons VP ACING = 6 VT AM sends 6 RUs to NCP before response IST A TUS = ACTIVE LU comes up active, can be INACTIVE ——————- APPLICA TION VT AM P ARAMETERS ——————- BUFF ACT = 10 Parameter used with BUFFLIM ——————- JESX Par[...]

  • Page 70

    CHAPTER 12: System/Line Gen for Batch 69 W AITIME = 01 Number of seconds between completion of printing before JES will initialize print of the next output data set —————— PRINTER A TT ACHED TO 3776 ——————- Rnnn.PR1 SNA Remote Printer one OPERA TOR Remote terminal operator uses a $DF JES command to check the forms queue and [...]

  • Page 71

    PROTOCOL CONVER TER MODEL A/S-4 70 —————— PUNCH A TT ACHED TO 3776 ——————- Rnnn.PU1 SNA Remote Punch one OPERA TOR CCTL CKPTLNS = 100 Number of cards to be punched per logical page CKPTPGS = 10 CLASS = C(1)...C(n) (*) CMPCT COMP COMP ACT = n ST AR T Punch is active NOSEP SELECT = PUNCH1 Device is a card punch with a sub-addr[...]

  • Page 72

    CHAPTER 12: System/Line Gen for Batch 71 PUDEST = 0 PULCL PUNODE XEONODE = ——————- LINE ——————- LINEnnn Line number ADISCON CODEA COMP EBCDIC EBCDIC character code IF ACEA LOWSPEED P ASSWORD = cccccccc TRANSP Line supports transparent data UNIT = SNA ——————- JES2 SYSTEM-WIDE P ARAMETERS ——————— APPL[...]

  • Page 73

    PROTOCOL CONVER TER MODEL A/S-4 72 &NUMTPBF = nnn Number of JESX Data Communications Buffers &PR TRANS = YES Print Line T ranslation Option, looks for chars less than X ‘40’ and if so sends data as transparent * Option not supported (1) Option determined by max RU size. A/S-4 availablebuffer size = 2100 characters (2) Option is availabl[...]

  • Page 74

    CHAPTER 12: System/Line Gen for Batch 73 The following is a copy of the suggested USST AB table for use by the A/S-4. RJEINCDT USST AB LOG USSCMD CMD=LOGON,REP=LOGON,FORMA T=BAL USSP ARM P ARM=P1,REP=APPLID USSP ARM P ARM=P2,REP=LOGMODE USSP ARM P ARM=P3,REP=DA T A SIGNON USSCMD CMD=SIGNON,REP=LOGON,FORMA T=BAL USSP ARM P ARM=APPLID,DEFAUL T=JES2 U[...]

  • Page 75

    PROTOCOL CONVER TER MODEL A/S-4 74 13. T roubleshooting Problems and Odd Installation Problems Listed below are some of the common problems found with installation and operation of the A/S-4 unit. Find the problem you are experiencing and try the remedies listed to fix the problem. PROBLEM SYMPTOM POSSIBLE REMEDIES 1. No P ower P ower light on fron[...]

  • Page 76

    CHAPTER 13: T roubleshooting Problems and Odd Installation Problems 75 PROBLEM SYMPTOM POSSIBLE REMEDIES TCTS light is on and a. Baud rate of A/S-4 TTX light does blink does not match ter minal when pow er is applied baud rate. Chec k baud to the A/S-4 rate s witches, ref er to Section 4.1. b . Switches SW3/1,2,3 and 4 are not set correctly ,, ref [...]

  • Page 77

    PROTOCOL CONVER TER MODEL A/S-4 76 Appendix A: 3274 SNA Communication Operations This appendix is intended to give a VDU operator the basic description of the System Network Architecture (SNA) for a 3278 CR T (or like device) in the area of remote communications. First the 3278 CR T is connected to a 3274 controller that allows 32 3278 CR T’ s to[...]

  • Page 78

    APPENDIX A: 3274 SNA Communication Operations 77 NOTE Some applications may not send a welcome messa ge . The operator m ust send the first message to start the transactions. 8. After the operator has finished working, he should signoff the application. The system will then UNBIND the CR T so that the CR T and applications are no longer communicati[...]

  • Page 79

    PROTOCOL CONVER TER MODEL A/S-4 78 Appendix B: General 3770 SNA Communication Operations This appendix is intended to give a basic description of the System Network Architecture (SNA) operation for an IBM 3776/77 Model 3 and 4 multiple logical unit (MLU) work station in the area of remote communications. The 3776/77 Model 3 and 4 is a stand alone w[...]

  • Page 80

    APPENDIX B: General 3770 SNA Communication Operations 79 8. After the operator has finished working, he should signoff the application. The system will UNBIND all the LUs from the host system so that the work station and application are no longer communicating with each other . This leaves the work station available for an operator to logon to anot[...]

  • Page 81

    PROTOCOL CONVER TER MODEL A/S-4 80 Appendix C: Conversion Char ts The following pages contain the EBCDIC-to-ASCII Character conversion chart. Characters under the “RECV” heading are the EBCDIC characters received from the SNA host. The ASCII equivalent is to the right under the “CONV” column. When EBCDIC data is directed to the printer the [...]

  • Page 82

    APPENDIX C: Conversion Charts 81 EBCDIC-to-ASCII Character Conversion EBCDIC-to-ASCII EBCDIC-T O-ASCII RECV CONV PR T CONV RECV CONV PR T CONV 00-NUL 00-NUL 20-SP 20-DS 00 THW 01-SOH 01-SOH THW 21-SOS 00 THW 01-STX 02-STX THW 22-FS 1C-FS THW 03-STX 03-ETX THW 23- 00- THW 04-PF 00- NO TE 2 24-BYP 00- THW 05-HT 09-HT NO TE 3 25-LF 0A-LF NOTE 9 06-LC [...]

  • Page 83

    PROTOCOL CONVER TER MODEL A/S-4 82 EBCDIC-to-ASCII EBCDIC-T O-ASCII RECV CONV PR T CONV RECV CONV PR T CONV 40-SP 20-SP 20-SP 60- 2D- 2D- - 41- 00- 00- 61- 2F-/ 2F-/ 42- 00- 00- 62- 00- 00- 43- 00- 00- 63- 00- 00- 44- 00- 00- 64- 00- 00- 45- 00- 00- 65- 00- 00- 46- 00- 00- 66- 00- 00- 47- 00- 00- 67- 00- 00- 48- 00- 00- 68- 00- 00- 49- 00- 00- 69- [...]

  • Page 84

    APPENDIX C: Conversion Charts 83 EBCDIC-to-ASCII EBCDIC-T O-ASCII RECV CONV PR T CONV RECV CONV PRT CONV 80- 00- 00- A0- 00- 00- 81-a 61-a 61-a A1-~ 7E-~ 7E-~ 82-b 62-b 62-b A2-s 73-s 73-s 83-c 63-c 63-c A3-t 74-t 74-t 84-d 64-d 64-d A4-u 75-u 75-u 85-e 65-e 65-e A5-v 76-v 76-v 86-f 66-f 66-f A6-w 77-w 77-w 87-g 67-g 67-g A7-x 78-x 78-x 88-h 68-h 6[...]

  • Page 85

    PROTOCOL CONVER TER MODEL A/S-4 84 EBCDIC-to-ASCII EBCDIC-T O-ASCII RECV CONV PR T CONV RECV CONV PR T CONV C0-{ 7B-{ 7B-{ E0- 5C- 5C- C1-A 41-A 41-A E1- 00- 00- C2-B 42-B 42-B E2-S 53-S 53-S C3-C 43-C 43-C E3-T 54-T 54-T C4-D 44-D 44-D E4-U 55-U 55-U C5-E 45-E 45-E E5-V 56-V 56-V C6-F 46-F 46-F E6-W 57-W 57-W C7-G 47-G 47-G E7-X 58-X 58-X C8-H [...]

  • Page 86

    APPENDIX C: Conversion Charts 85 The following chart is the ASCII-to-EBCDIC character conversion chart. Data received from the VDU in ASCII format is found in the “RECV” column and when the specific character is transmitted to the SNA host it will appear as described in the “CONV” column. ASCII-to-EBCDIC Character Con v ersion ASCII-to-EBCD[...]

  • Page 87

    PROTOCOL CONVER TER MODEL A/S-4 86 ASCII-to-EBCDIC ASCII-to-EBCDIC RECV CONV RECV CONV 40-@ 7C-@ 60-` 79-` 41-A C1-A 61-a 81-a 42-B C2-A 62-b 82-b 43-C C3-C 63-c 83-c 44-D C4-D 64-d 84-d 45-E C5-E 65-e 85-e 46-F C6-E 66-f 86-e 47-G C7-G 67-g 87-g 48-H C8-H 68-h 88-h 49-I C9-I 69-i 89-i 4A-J D1-J 6A-j 91-j 4B-K D2-K 6B-k 82-k 4C-L D3-L 6C-l 93-l 4D-[...]

  • Page 88

    1000 P ark Drive • Lawrence, P A 15055-1018 • 724-746-5500 • F ax 724-746-0746 © Copyright 1989. Black Box Corporation. All rights reserv ed.[...]