AEG SCN71800S0 manuel d'utilisation

SCN71800S0 EN FRIDGE-FREEZER USER MANUAL[...]

FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG we[...]

CONTENTS 4 Safety information 6 Control panel 11 First use 11 Daily use 13 Helpful hints and tips 15 Care and cleaning 16 What to do if… 18 Technical data 18 Installation 26 Noises 28 Environmental concerns The following symbols are used in this user manual : Important information concerning your personal safety and information on how to avoid da[...]

SAFETY INFORMATIO N In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the ap - pliance are thoroughly familiar with its operation[...]

– thoroughly ventilate the room in which the appliance is situated • It is dangerous to alter the specifications or modify this product in any wa y. Any damage to the cord may cause a short-circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, co mpres sor) must be replaced by a certified service agent or qua[...]

• Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean the drain. If the drain is blocked, water will collect in the bottom of the appliance. Installati on For electrical connection carefully follow the instructions given in specific paragraphs. • Unpack the appliance and check if there are damages on it. Do [...]

3 Fridge Temperature warmer button 4 Mode button 5 OK button 6 Freezer Temperatur e colder button 7 Freezer Temperature warmer button 8 Display It is possible to change predefined sound of buttons to a loudly one by press ing together Mode button and Temperature colder button fo r some seconds. Change is reversible. Display Off COOL FROST MA TIC MA[...]

1. Press the appliance ON/OFF button for 5 seconds . 2. The display switches off. 3. To disconnect the appliance from the power disconnect the mains plug from the pow - er socket. Switching off the fridge To switch off the fridge: 1. Press the Mode button until the corresponding icon appears. The fridge Off indicator and the fridge compartment in d[...]

2. Press the Timer regulator button to change the Timer set value from 1 to 90 minutes. 3. Press the OK button to confirm. The Minute Minder indicator is shown. The Timer start to flash (min). At the end of the countdown the Minute Minder indicator flashes and an audible alarm sound s: 1. Remove any drinks contained in the freezer compartment. 2. P[...]

• flashing Alarm light • acoustic buzzer When normal conditions are restored (door closed), the alarm will stop. During the alarm, the buzzer can be switched off by pressing alarm button. COOLMATIC functi on If you need to insert a large amount of warm food, for example after doing the grocery shopping, we suggest activating the COOLMATIC funct[...]

1. Press the Mode button until the corresponding icon appears. The FROSTMATIC indicator flashes. 2. Press the OK button to confirm. The FROSTMATIC indicator is shown. This function stops automatically after 52 hours. To switch off the function before its automatic end: 1. Press the Mode button until the FROSTMATIC indicator flashes. 2. Press the OK[...]

Storage of frozen food When first starting-up or after a period out of use, before putting the products in the com - partment let the appliance run at least 2 hours on the higher settings. If large quantities of food are to be stor ed, remove all drawers and baskets from appliance and place food on cooling shelves to obtain the best performance. WA[...]

Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be posi - tioned as desired. For better use of space, the front half-shelves can lie over the rear ones. Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at dif - ferent heights.[...]

warmer settings to allow automatic defrosting and so a saving in electricity consump - tion. Hints for fresh food refrigeration To obtain the best performance: • do not store warm food or evaporating liquids in the refrigerator • do cover or wrap the food, particularly if it has a strong flavour • position food so that air can circulate freel[...]

• be sure that frozen foodstuffs are transferred from the foods tore to the freezer in the shortest possible time; • not open the door frequently or leav e it open longer than absolutely necessary. • Once defrosted, food deteriorates rapidly and cannot be refrozen. • Do not exceed the storage period indicated by the food manufacturer. CARE [...]

The absence of frost is due to the continuous circulation of cold air inside the compart - ment, driven by an automatically controlled fan. Periods of non-operation When the appliance is not in use for long periods, take the following precautions: • disconnect the appliance from electricity supply • remove all food • defrost (if foreseen) and[...]

Problem Possible cause Solution The room temperature is too high. Decrease t he room temper ature. The compre ssor doe s not start immediately after pressing the FROST MATIC or COOLMATIC button, or after changing the tem - perature. This is normal, no error has oc - curred. The compressor starts after a pe - riod of time. Water flows on the rear pl[...]

Replacing the lamp CAUTION! Disconnect the plug from the mains socket. 1. Press on the rear hook and at the same time slide the cover in the direction of the arrow. 2. Replace the lamp with one of the same power and specifical ly designed for household appliances. (the maximum power is shown on the light bulb cov - er). 3. Fix the lamp cover into i[...]

Positioning Install this appliance at a location where the ambient temperature correspo n ds to the cli - mate class indicated on the rating plate of the appliance: Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Electrical Connection CAUTION! Any electrical work required to instal[...]

2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black. 3. Connect the wire coloured brown to the terminal either marked with the “L“ or col - oured red. 4. Check that no cut, or stray strands of wire is present and the cord clamp 4 is secure over the outer sheath. 5. Make sure the electricity [...]

• Loosen and remove the lower pin. On the opposite side: • Tighten the lower pin. • Install the lower door. • Tighten the middle hinge. • Install the spacer. • Install the upper door. • Tighten the upper pin. Ventilation requirements 6 cm min. 200 cm 2 min. 200 cm 2 The airflow behind the appliance must be sufficient. Installing the a[...]

1 2 Install the appliance in the niche. Push the appliance in the direction of the arrow (1) until the upper gap cover stops against the kitchen furniture. Push the appliance in the direction of the arrow (2) against the cupboard on the opposite side of the hinge. 4 mm 44 mm Adjust the appliance in the niche. Make sure that the dis - tance between [...]

Remove the correct part from the hinge cover (E). Make sure to remove the part DX, in the case of right hinge, SX in opposite case. E E B D C Attach the covers (C, D) to the lugs and the hinge holes. Install the vent grille (B). Attach the hinge covers (E) to the hinge. F E D Conne ct the applianc e late rally to th e kitchen furniture sidewall: 1.[...]

Disconnect the parts (Ha), (Hb), (Hc) and (Hd). ca. 50 mm ca. 50 mm 21 mm 90° 90° 21 mm Install the part (Ha) on the inner side of the kitchen furniture. Ha Hc Push the part (Hc) on the part (Ha). 24 Installation[...]

Ha Hb 8 mm Open the appliance door and the kitchen furniture door at an angle of 90°. Insert the small square (Hb) into guide (Ha). Put together the appli - ance door and the furni - ture door and mark the holes. Ha K 8 mm Remove the brackets and mark a distance of 8 mm from the outer edge of the door where the nail must be fitted (K). Hb Place th[...]

Hb Hd Press the part (Hd) on the part (Hb). Do a final check to make sure that: • All screws are tightened. • The sealing strip is attached tightly to the cabinet. • The door opens and closes correctly. NOISES There are some sounds during normal running (compressor, refriger ant circulation). BRRR! HISSS! CLICK! BLUBB! CRACK! SSSRRR! OK CLICK[...]

BRRR! BRRR! BLUBB! BLUBB! HISSS! HISSS! SSSRRR! SSSRRR! Noises 27[...]

CRACK! CRACK! ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potent[...]

29[...]

30[...]

31[...]

www.aeg.com/shop 222344536-A-272011[...]