Weslo WATL27205.1 manual

USER'S MANUAL Serial Number Decal Model No. WATL27205.1 Serial No. CAUTION Read all precautions and in- structions in this manual before using this equipment. Save this manual for future reference. QUESTIONS? If you have questions, or if there are missing or damaged parts, we will guarantee complete sat - isfaction through direct assis - tance[...]

T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . .[...]

3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least 2.5 m (8 f t.) of clearance behind it and 0.5 m (2 ft.) on each side. Do not place the treadmill on any surfac[...]

4 178425 V ertical Latch W arning Decal, T readmill A warning decal in Chinese has been placed on the treadmill in the location shown at the right. An English decal with the same information is included. If desired, apply the English decal on top of the Chinese decal. If the decal is missing or illegible, call the telephone number on the front cove[...]

5 T hank you for selecting the new WESLO ® E -30 tread- m ill. The E-30 treadmill offers an impressive array of features designed to help you achieve your fitness goals in the convenience and privacy of y our h ome. And when you’re not exercising, the unique E-30 trea d- mill can be folded up, requiring less than half the floor space of conventi[...]

ASSEMBL Y A ssembly requires two persons. S et the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. N ote: The und ersi de o f th e tre admi ll w alki ng b elt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred t[...]

7 5. Identify the Right Handrail (40), which has a pulse bar bracket on its left side. Feed the Wire Harness (65) up into the large bracket on the Right Handrail and out of the large hole in the left side. (Note: It may be helpful to use needlenose pliers to pull the Wire Harness out of the hole.) Remove any nylon ties from the large bracket. Inser[...]

Tie 8. Insert the Wire Harness (65) through the indicated nylon tie on the Console Base (67). Next, touch the Right Handrail (40) to discharge any static. See drawing 8a. Insert the connector on the end of the Wire Harness into the red socket beneath the Console (69). The connector should slide easily into the socket and snap into place. If the con[...]

9 12. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be in- cluded. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking belt (see page 18). To protect the floor or carpet, place a mat under the treadmill. 10. Lower the Handrails (13, 40) until they are[...]

10 OPERA TION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- r ate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER C[...]

1 1 ETWA27205 FEATURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective and enjoyable. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button. As you exercise, the displays will provide continuous exercise feed[...]

12 HOW TO TURN ON THE POWER P lug in the power cord (see page 11). Next, locate t he on/off switch on the right side of the treadmill frame near the right up- right. Make sure that the switch is in the “on” position. Next, stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing on page 11) and attach the cli[...]

13 Incline display —This display shows the in- c line level of the tread- mill. Time/Pace display — When the manual mode is selected, this display will show the elapsed time and your pace (pace is mea- sured in minutes per mile or minutes per kilometer). The d ispla y will al- terna te be tween one number and the other every few seconds, as sho[...]

14 Listen to your favorite FM radio station if desired. Press the Power button to turn on the radio. Next, press the Tune buttons to select the desired FM r adio station. Then, press the Volume buttons to adjust the volume of the speakers. Note: A pair of headphones (not included) can be plugged into the headphone jack. If desired, you can save you[...]

15 When only three seconds remain in the first seg- ment of the program, both the Current Segment c olumn and the column to the right will flash, and a series of tones will sound. If the speed and/or in- c line of the treadmill is about to change, the Incline display and/or the Speed display will flash to alert you. When the first segment ends, all[...]

HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- m anently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the treadmill. 1. Hold the[...]

17 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet (see p[...]

18 Locate the Reed Switch (16) and the Magnet (10) on the left side of the Pulley (101). Turn the Pulley until t he Magnet is aligned with the Reed Switch. M ake sure that the gap between the Magnet and the R eed Switch is about 3 mm (1/8 in.). I f necessary, loosen the indicated 3/4” Tek Screws (9), move the Reed Switch slightly, and then retigh[...]

19 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with [...]

Wheel Nut (64)–2 1” Bolt (43)–4 Silver Ground Screw (66)–1 3/4” Screw (38)–9 1/4” W asher (44)–4 1/4” Star W asher (45)–4 3/8” Star W asher (55)–2 3” Bolt (58)–4 4” Handrail Bolt (78)–2 5/16” Star W asher (57)–4 2” Bolt (61)–2 Pulse Bar Screw (37)–2 4” Frame Bolt (54)–2 3/8” W asher (12)–2 #10 Star [...]

P ART LIST—Model No. W A TL27205.1 R1105A Key N o. Qty. Description Key N o. Qty. Description Key N o. Qty. Description 1 1 Hood 2 4 #8 Washer 3 2 Foot Rail 4 2 Belt Guide 5 4 1/2” Screw 6 4 Isolator 7 4 Platform Screw 8 2 Rubber Hood Mount 9 24 3/4” Tek Screw 10 1 Magnet 11 1 Reed Switch Clip 12 2 3/8” Washer 13 1 Left Handrail 14 2 Motor [...]

89 43 44 45 43 45 44 47 38 67 53 54 55 57 58 79 61 64 74 60 65 73 20 27 77 62 58 57 74 55 54 64 61 63 73 60 43 38 45 44 45 44 43 71 38 69 68 38 38 38 84 104 27 85 87 70 38 12 12 72 46 102 78 78 65 38 42 66 38 40 36 13 42 38 38 36 106 106 83 35 2 48 31 32 26 34 27 27 28 27 27 29 30 20 20 27 2 86 86 9 9 9 9 16 59 9 10 11 9 7 9 8 9 8 103 59 9 3 7 9 9 [...]

Part No. 232942 R1105A Printed in Canada © 2005 ICON IP, Inc. LIMITED W ARRANTY Shanghai Newlife Fitness Equipment, Inc. (Newlife), warrants this product to be free from defects in work - manship and material under normal use and service conditions. The drive motor is warranted for five (5) ye ar s after the date of purchase. Parts and labor are w[...]