ViewZ VZ-17RCR manual

17/19-INCH RACK TFT -LCD MONITOR USER MANUAL Please read this manual thoroughly befor e use, and keep it handy for future reference.[...]

[...]

SAFETY INSTRUCTION ………………………………………………………… . …… 2 ~ 3 CAUTIONS …………………………………………………………… .......................... 4 FCC RF INTERFERENCE STATEMENT …………………………… ....................... 5 CONNECTING WITH EXTERNAL EQUIPMENT ……………?[...]

Import ant Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cl oth. 7. Do not block any ventilation openings. In stall in accordance with the manufacturer ’s instructions. 8. Do not install near any heat sou[...]

- The apparatus shall not be exposed to drippi ng or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatu s. - Minimum distances(e.g. 10cm) around the a pparatus for sufficient ventilation. “W ARNING – T o reduce the risk of fire o r electric shock, do not expose the app aratus to rain or moisture.?[...]

CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTION N Le cordon d`alimentation est utillsé comme interrupteur gé né ral. La prise de courant doit ê tre situé e ou installé e à proximité du maté riel et ê tre facile d`[...]

NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed[...]

A. BOTTOM PANEL CONTROL 1. PC STEREO IN 2. S-VIDEO (Y/C) OUT Y/C separated signal looping output 3. S-VIDEO (Y/C) IN Y/C separated signal input 4. AUDIO L Stereo Audio Signal In put , This input is for AV2 5. AUDIO R Stereo Audio Signal In put , This input is for AV1,S-VIDEO 6. VIDEO 2(AV2) OUT Video looping output for AV2 7. VIDEO 2(AV2) IN Compos[...]

B. REMOTE CONTROLLER(Optiona l) 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Selects an input source. 3. APC (Auto Picture Control) Selects a picture mode. 4. ACC (Auto Color Control) Selects a color mode. 5. AV1 Select AV1 mode 6. AV2 Select AV2 mode 7. S-VIDEO Select S-VODEO mode 8[...]

C . FRONT & BOTTOM KEY CONTROL 1 , 2 . VOL Adjust menu settings. / Adjust the volume 3 , 4. ▼ ▲ This button allows user to enter the sub-menu of the activated function when down key is pressed on the main menu. 5. SOURCE / SELECT Select input source, and move the previous menu. 6. MENU / EXIT Activates and exits the On Screen Displa y . Thi[...]

OSD MENU DESCRIPTION All picture, sound setti ngs and setup for the monitor can be adjusted in the OSD menu. ( O n S creen D ispl ay) To adjust the OSD screen : 1. Press the Menu button to enter the OSD menu. 2. Press the ▲/▼ buttons to s elect the desired option. The selected option is highlighted. 3. Press the ▶ button to enter the submenu [...]

B. Picture/Sound Option Function Value Picture Mode Sets picture mode. See table below. Color Tone Sets color tone. See table below. Mute Mutes speaker sound. Off or On. Volume Adjust the level of audio volume. 0 ~ 100 . Size Inactivated. PC 1) See table below. 1) Unavailable in AV 1, AV2 & S -Video inp uts . Picture Mode (In AV1, AV2 & S-V[...]

Color Tone Custom 1) To manually adjust the color tones(Red, Green and Blue). Cool Gives the white color a bluish ti nt. Normal Gives the white color a neutral ti nt. Warm Gives the white color a reddis h tint. 1) Unavailable in AV1 , AV2 & S-Video. PC Option Function Value Auto Adjust Auto geometry adjustment. Phase Adjusts the number of horiz[...]

C. Setup Option Function Value Reset Resets the monitor settings to their factory default. Language Sets the language of the OSD menu. English, French, Deutsch, Italian, Spanish, Portuguese or Nederland. OSD Tone Changes background of monitor men us (e.g. input source & information) . Transparency or Blue. Blue Screen Displays a blue screen if [...]

Wall mountable using two methods: 1) Using the both sides pre-cut holes to rack mounting. 2) Using the VESA standard wall mount design and the 100mm holes pattern on the back panel to install the LCD monitor to the wall. - 13 - 100mm 100mm Rack mounting holes[...]

▶ PIN ASSIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND D-SUB ▶ ACCESSORI ES 1. POWER CORD 2 . USER’S MANUAL 3. PC cable 4. Adaptor 5. Remote Control 6. Batteries 7. Wall mount[...]

POWER CONSUMPTION Mode 17 ” 19 ” On < 36W < 42W Standby < 1W Suspend < 1W Active Off < 1W LE D INDICATOR The power management feature of the monitor is comprised of four stages: On(Green), Standby, Suspend, Active off(Red on/off 1 sec) and Unsupported mode(Green). MODE LED COLOR MONITOR OPERATION ON GREEN Normal Operation STANDBY[...]

15" LCD-Type 17 ˝ Diagonal AM-TFT(Acti ve-Matrix) 19 ˝ Diagonal AM-TFT(Acti ve-Matrix) Pixel pitch (mm): 0.2 64 (H) x 0 .2 64 (V) Pixel pitch (mm): 0.294(H) x 0.294(V) BRIGHTNESS: 2 50 cd/ ㎡ ( Typical) BRIGHTNESS: 2 50 cd/ ㎡ ( Typical) CONTRAST RATIO: 10 00:1(Typi cal) CONTRAST RATIO: 800:1(Typical) RESPONSE TIME: 5ms(Typical) RESPONSE T[...]

WEEE Symbols - 17 - Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. [...]

MEMO[...]

MEMO[...]

MEMO[...]

[...]

P/N : L39M E0 170 _Rev.4[...]