Ubiquiti Networks UB-UAP-PRO-1 manual

802.11ac Dual-Radio Pro Access Point Model: UAP-AC-PRO[...]

Introduction Thank you for purchasing the Ubiquiti Netw orks® UniFi®802.11ac Dual-Radio Pro A ccess Point. T his Quick Start Guide is designed to guide you through installation and includes warranty terms. Important: The UAP-AC-PRO requir es the UniFi Controller v4.7 or newer , av ailable at: downloads.ubnt.c om/unifi Package Contents UniFi ac[...]

Installation Requirements • Phillips screwdriver • Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting) • Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed) • Cat5/6 UTP cable for indoor installations Outdoor Installation Requirements Important: The UAP-AC-PRO ma y be installed outdoors under a[...]

Network T opology Requirements • A DHCP-enabled network (for the AP to obtain an IP address as well as for the wireless clients after deployment) • A UniFi Cloud Key or management station running the UniF i Controller v4.7 (or newer) software , located either on-site and connected to the same Layer-2 network, or off-sit e in the cloud or NOC Un[...]

Hardware Overview LED LED Color Status White F ac tory default, waiting to be integrated. Flashing White Initializing. Alternating White/Blue Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is taking place. Blue Indicates the device has been successfully integrated into a network and is w [...]

Ports Main Port Secondary Port Security Slot Reset Button Secondary The Secondary por t is a Gigabit Ethernet port used for bridging. Reset The Reset button serves two functions for the UniF i AP: • Restart Press and release the Reset button quickly . • Restore to F ac tory Default Settings Press and hold the Reset button for more than five sec[...]

Hardware Installation The UniFi AP can be mounted on the w all or ceiling. P er form the steps for the appropriate installation: Wall Mount 1. Position the Mounting Brack et at the desired location on the wall with the Arrow pointing up. 2. Mark the four mounting holes, and use a 6 mm drill bit to drill the holes. Arrow 3. If your Ethernet cable fe[...]

4. Insert the Screw Anchors into the 6 mm holes. Secure the Mounting Bracket to the wall b y inser ting the Screws into the anchors. 5. Remove the rubber port cover from the UniF i AP .[...]

6. If the Ethernet cable is fed through the wall, skip to step7. If the Ethernet cable runs along the mounting surface, remove the cable feed plug . 7. Feed the Ethernet cable thr ough the port cover . Note: The feed hole will stretch to acc ommodate the RJ45 connector , and then seal around the cable. 8. Connect the Ethernet cable to the Main p[...]

9. Align the Notch on the top edge of the UniFi AP with the Arrow on the Mounting Bracket . Lock Ta b Arrow Notch 10. Rotate the UniFi AP clockwise until the tabs lock into place and the Lock T ab engages.[...]

Ceiling Mount 1. Remove the ceiling tile. 2. Place the Ceiling Backing Plate in the center of the ceiling tile. Mark the four mounting screw holes and a 18 mm hole for the Ethernet cable feed . 18 mm Hole for Ethernet Cable Feed 3. Use a 3 mm drill bit to drill the screw holes, and cut or drill the hole for the Ethernet cable feed .[...]

4. Insert the Flat Head Screws through the Mounting Bracket , ceiling tile, and Ceiling Backing Plate . F asten the screws using the Keps Nuts . Then feed the Ethernet cable through the tile and bracket.[...]

5. Remove the port cover from the UniF i AP , and then feed the Ethernet cable through the port cover . Note: The feed hole will stretch to acc ommodate the RJ45 connector , and then seal around the cable. 6. Connect the Ethernet cable to the Main port and replace the port cover .[...]

*640-00183-06* 640-00183-06 7. Align the Notch on the top edge of the UniFi AP with the Arrow on the Mounting Bracket . Lock T ab Arrow Notch 8. Rotate the UniFi AP clockwise until the tabs lock into place and the Lock T ab engages. 9. Set the ceiling tile back into place.[...]

Po wering the UniF i AP The U AP-AC-PRO features auto-sensing 802.3af/802.3at P oE support and can be powered by any of the following: • Ubiquiti Networks UniFi S witch • 802.3af/802.3at PoE+ compliant switch • Ubiquiti Networks Gigabit PoE A dapter (48V, 0.5A) The single-pack of the U AP-AC-PRO includes one Gigabit PoE adapter . For multi-pa[...]

Connecting to a PoE A dapter 1. Connect the Ethernet cable from the UniFi AP t o the POE port of the Gigabit PoE adapter . 2. Connect an Ethernet cable from your LAN to the LAN port of the Gigabit PoE adapter . 3. Connect the Power Cord to the adapt er , and then plug the Power Cord into a po wer outlet. Mounting the PoE Adapt er (Optional) 1. Remo[...]

Software Installation Download and install the latest version of the UniF i Controller software at: downloads.ubnt.com/unifi Launch the software and follow the on-screen instructions. Step-by-step instructions are available in the U ser Guide located on our website: documentation.ubnt .com/unifi After you have installed the software and run the Uni[...]

Specifications UAP-A C-PRO Dimensions 196.7 x196.7 x 35 mm (7.74 x 7.74 x 1.38") Weight with Mounting Kit 350 g (12.35 oz) 450 g (15.87 oz) Networking Interface (2) 10/100/1000 Ethernet Ports Buttons Reset Max. Power Consumption 9W Power Method PoE 802.3af/802.3at Power Supply 48V , 0.5A Gigabit PoE Adapter* Max. TX Power 2.4 GHz 5 GHz 22 dBm [...]

Safety Notices 1. Read, follow , and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer . W ARNING: Do not use this produc t in location that can be submerged by water . W ARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from light[...]

Limited W arranty UBIQUITI NETWORKS, Inc (“UBIQUITI NET WORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS’ sole and exclusive obligat[...]

Disclaimer EXCEPT FOR ANY EXPRESS W ARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND IT S AND THEIR THIRD P ART Y DA T A, SERVICE, SOFTWARE AND HARDW ARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENT A TION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR ST A TUTORY , INCLUDING, BUT NO T LIMITED TO , REPRESENT A TIONS, GUARANT[...]

Note Some countries, states and provinces do not allo w exclusions of implied warranties or conditions, so the abov e exclusion may not apply to you . Y ou may have other rights that vary from country to country, state to state, or province t o province. Some countries , states and provinces do not allow the exclusion or limitation of liability for[...]

Industry Canada CAN ICES-3(A)/NMB-3(A) This Class A digital apparatus complies with Canadian ICES-003. T o reduce potential radio interference to other users, the ant enna t ype and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r .p.) is not more than that permitted for successful communication. This device comp[...]

RF Exposure W arning The antennas used for this transmitter must be installed to pro vide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter , except as listed for this product’ s certification. Les antennes utilisées pour cet émetteur doit être ins[...]

RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dis[...]

Español La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación. Es responsabil[...]

Declaration of Conformity Česky [Czech] UBIQUITI NET WORKS tímto prohlašuje, že tot o UBIQUITI NET WORKS zařízení, je ve shod se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Hermed, UBIQUITI NETWORKS, erk lærer at denne UBIQUITI NET WORKS enhed, er i overensstemmelse med de v æsentli[...]

Malti [Maltese] Hawnhekk, UBIQUITI NET WORKS, tiddikjara li dan il-mezz UBIQUITI NET WORKS huwa konformi mar-rekwiżiti essenzjali u dispożizzjonijiet rilevanti oħrajn ta ‘Direttiva 1999/5/EC. Norsk [Norwegian] Herved UBIQUITI NET WORKS, erklærer at denne UBIQUITI NET WORKS enheten, er i samsvar med de grunnleggende kravene og andre relevante [...]