Toshiba M30-35 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Toshiba M30-35. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Toshiba M30-35 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Toshiba M30-35 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Toshiba M30-35, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Toshiba M30-35 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Toshiba M30-35
- nombre de fabricante y año de fabricación del dispositivo Toshiba M30-35
- condiciones de uso, configuración y mantenimiento del dispositivo Toshiba M30-35
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Toshiba M30-35 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Toshiba M30-35 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Toshiba en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Toshiba M30-35, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Toshiba M30-35, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Toshiba M30-35. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    Toshiba Personal Computer Satellite M30-35 Series Maintenance Manual TOSHIBA CORPORATION File Number 960-455[...]

  • Página 2

    ii Satellite M30-35 Maintenance Manual (960-455) Copyright © 2003 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the inform ation contained herein. Toshiba Personal Computer[...]

  • Página 3

    Satellite M30-35 Maintenance Manual (960-455) iii Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite M30-35 Series. The procedures described in this manual are intended to help service technicians isolate faulty Field Replaceable Units (FRUs) and replace them in the fiel[...]

  • Página 4

    iv Satellite M30-35 Main tenance Manual (960-455) The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Satellite M30 system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems. Chapter 3 Test and Diagnostics describes how to perform test and diagnostic operat[...]

  • Página 5

    Satellite M30-35 Maintenance Manual (960-455) v Conventions This manual uses the following formats to describe, identify, and highlight term s and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition. For example: Read Only Memory (ROM) Keys K[...]

  • Página 6

    vi Satellite M30-35 Main tenance Manual (960-455) Table of Contents Chapter 1 Hardware Overview 1.1 Features ................................................................................................................... ... 1-1 1.2 System Unit Block Diagram ...................................................................................... [...]

  • Página 7

    Satellite M30-35 Maintenance Manual (960-455) vii Chapter 3 Tests and Diagnostics 3.1 The Diagnostic Test ................................................................................................... 3-1 3.2 Executing the Diagnostic Test ................................................................................... 3-3 3.3 Subtest Names [...]

  • Página 8

    viii Satellite M30-35 Maintenance Manual (960-455) Chapter 4 Replacement Procedures 4.1 General .................................................................................................................... ... 4-1 4.2 Battery Pack ............................................................................................................... [...]

  • Página 9

    Satellite M30-35 Maintenan ce Manual (960-455) ix Appendices Appendix A Handling the LCD Module ........................................................................... A-1 Appendix B Board Layout ................................................................................................ B-1 Appendix C Pin Assignments.......................[...]

  • Página 10

    x Satellite M30-35 Maintenance Manual (960-455)[...]

  • Página 11

    Chapter 1 Hardware Overview[...]

  • Página 12

    1 Hardware Overview 1-ii Satellite M30-35 Maintenance Manual (960-455)[...]

  • Página 13

    1 Hardware Overview Chapter 1 Contents 1.1 Features................................................................................................................... ....1-1 1.2 System Unit Block Diagram .......................................................................................1-7 1.3 3.5-inch Floppy Disk Drive (USB External) ........[...]

  • Página 14

    1 Hardware Overview 1-iv Satellite M30-35 Maintenance Manual (960-455) Figures Figure 1-1 Front of the computer .....................................................................................1-6 Figure 1-2 System un it configuration...............................................................................1-6 Figure 1-3 System un it block[...]

  • Página 15

    1.1 Features 1 Hardware Overview 1 Features 1.1 Features The Toshiba Satellite M30 Personal Computer uses extensive Large Scale Integration (LSI), and Complementary Metal-Oxide Sem iconductor (CMOS) technology extensively to provide compact size, minim um weight, low power usage and high reliability. This computer incorporates the following feature[...]

  • Página 16

    1 Hardware Overview 1.1 Features  CD-RW/DVD Drive This drive is a combination of DVD-ROM and CD-R/RW Drive. . It is full-size and runs either 12cm (4.72-inch) or 8cm (3.15-inch) DVD/CDs without an adaptor. This drive reads CD-ROM at maximum 24-speed, reads DVD-ROM at maximum 8-speed writes CD-R at maximum 24-speed, and writes CD-RW at maxim um 2[...]

  • Página 17

    1.1 Features 1 Hardware Overview  Universal Serial Bus (USB2.0) Three USB ports are provided. The ports comply with the USB2.0 standard, which enables data transfer speeds 40 times faster than USB1.1 standard. USB1.1 is also supported.  IEEE 1394 port The computer comes with one IEEE 1394 port. It enables high-speed data transfer directly fro[...]

  • Página 18

    1 Hardware Overview 1.1 Features  Sound system The sound system is equipped with the following features: AC 97 Link • • • • • • • Sound CODEC: STAC9750 Stereo speakers Built-in Microphone (Mono) Volume control knob Stereo Headphone jack External microphone jack  Video-out jack The video jack enables to transfer NTSC or PAL data [...]

  • Página 19

    1.1 Features 1 Hardware Overview  Internet button This button launches an Internet browser. If the computer’s power is off, you can press this button to turn on the computer’s power and launch the browser automatically in one step.  TOSHIBA Console button This button launches an application automatically. The default is TOSHIBA Console. ?[...]

  • Página 20

    1 Hardware Overview 1.1 Features The front of the computer is shown in figure 1-1 and the system unit configuration is shown in figure 1-2. Figure 1-1 Front of the computer Figure 1-2 System unit configuration 1-6 Satellite M30-35 Maintenance Manual (960-455)[...]

  • Página 21

    1.2 System Unit Block Diagram 1 Hardware Overview 1.2 System Unit Block Diagram Figure 1-3 is a block diagram of the system unit. Internal Touch Pad Figure 1-3 System unit block diagram Satellite M30-35 Maintenance Manual (960-455) 1-7[...]

  • Página 22

    1 Hardware Overview 1.2 System Unit Block Diagram The system unit is composed of the following m ajor components:  Processor Intel Banias Processor 1.40GHz • • • • – Processor core speed: 1.40GHz (Performance Mode at 1.35V) and 1.20GHz (Battery Optimized Mode at 0.85V) – Processor bus speed: 400MHz – Integrated L1 cache memory: 32K[...]

  • Página 23

    1.2 System Unit Block Diagram 1 Hardware Overview  Memory Two memory slots are provided. Expansion up to 2GB (2,048MB) is available. Supports DDR CL2/2.5 • • • • • • • • Supports PC2700 – 256MB: 256Mbit (16M × 16bit) chips × 8 – 512MB: 512Mbit (32M × 8bit) chips × 16 – 512Mbit (32M × 16bit) chips × 8 – 1GB: 512Mbit [...]

  • Página 24

    1 Hardware Overview 1.2 System Unit Block Diagram  PC Card Controller Gate Array One YEBISU-SS gate array is used. • • • • This gate array has the following functions and components. – PCI interface (PCI Revision2.2) – CardBus/PC Card controller (Yenta2 Version2.2) – SD memory card controller (SDHC Ver.1.2) – SD IO card controlle[...]

  • Página 25

    1.2 System Unit Block Diagram 1 Hardware Overview  GPU Controller One nVIDIA NV34M chip is used. The GPU controller incorporates graphics accelerator, video accelerator. – VRAM 32MB (4M × 32 × 2)/64MB (4M × 32 × 4) DDR200MHz – AGP bus R2.0 x 4 – LCD Interface LVDS 2ch – TV Encoder: S-Video 4pin connectorTvxpress2  Sound Controller[...]

  • Página 26

    1 Hardware Overview 1.2 System Unit Block Diagram One TMP87PM48U chip is used. • • • • • • • • • This controller controls the power sources.  Clock Generator One ICS950812CGT is used. This device generates the system clock.  Modem Controller One built-in Askey-made 1456VQL4A(INT) modem card This controller has the following [...]

  • Página 27

    1.2 System Unit Block Diagram 1 Hardware Overview  Sensor Thermal Sensor: One ADM1032AR chip is used. • • LCD Sensor: One NRS-701-1015T is used. Satellite M30-35 Maintenance Manual (960-455) 1-13[...]

  • Página 28

    1 Hardware Overview 1.3 3.5-inch Floppy Disk Drive (USB External) 1.3 3.5-inch Floppy Disk Drive (USB External) The 3.5-inch USB FDD is a thin, high-performance reliable drive that supports 720KB and 1.44MB. The FDD is shown in figure 1-4. The specifications for the FDD are listed in Table 1-1. Figure 1-4 3.5-inch FDD (USB External) Table 1-1 3.5-i[...]

  • Página 29

    1.4 2.5-inch Hard Disk Drive 1 Hardware Overview 1.4 2.5-inch Hard Disk Drive The removable HDD is a random access non-volatile storage device. It has a non-rem ovable 2.5-inch magnetic disk and mini-W inchester type magnetic heads. The computer supports a 40GB, 60GB and 80GB HDD. The HDD is shown in figure 1-5. Specifications are listed in Table 1[...]

  • Página 30

    1 Hardware Overview 1.4 2.5-inch Hard Disk Drive Parameter Specifications HITACHI GBC000Z810 HITACHI GBC000014810 TOSHIBA HDD2188B Outline Width (mm) 69.85 ± 0.25 69.85 ± 0.25 69.85 dimensions Height (mm) 9.5 ± 0.25 9.5 ± 0.25 9.5 Depth (mm) 100 ± 0.25 100.2 ± 0.25 100 Weight (g) 99 max 102 99 max. Table 1-2 2.5-inch HDD specifications(2/2) S[...]

  • Página 31

    1.4 2.5-inch Hard Disk Drive 1 Hardware Overview Specifications Parameter HITACHI GBC000Z810 HITACHI GBC00014810 TOSHIBA HDD2188B Storage size (formatted) 80GB 80GB Speed (RPM) 4200 5400 4200 Data transfer speed 350 typ 450 max 175.0-341.78 (Mbits/s) Interface transfer rate (MB/s) 100 max. (Ultra DMA mode) Track density (Ktpi) 96 96 88.1 Access Tim[...]

  • Página 32

    1 Hardware Overview 1.5 CD-RW/DVD-ROM Drive 1.5 CD-RW/DVD-ROM Drive This drive is a combination of DVD-ROM and CD-R/RW Drive. . It is full-size and runs either 12cm (4.72-inch) or 8cm (3.15-inch) DVD/CDs without an adaptor. This drive reads CD-ROM at maximum 24-speed, reads DVD-RO M at maximum 8-speed writes CD-R at maximum 24-speed, and writes CD-[...]

  • Página 33

    1.6 DVD-R/RW 1 Hardware Overview 1.6 DVD-R/RW A full-size DVD-R/-RW drive module lets you reco rd data to rewritable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed, CD-ROMs at maximum 24 speed and CD-Rs at maximum 16 speed. It writes CD-R at up to 16 speed[...]

  • Página 34

    1 Hardware Overview 1.6 DVD-R/RW Table -4 DVD-R/RW drive specifications Item Toshiba SD-R6112 ATAPI Burst (MB/sec) 33.3 (Ultra DMA mode 2) 16.6 (PIO Mode 0 to 4, Multi word DMA mode 0 to 2) Average access time (ms) DVD-ROM CD-ROM DVD-RAM 115 105 170 Data buffer (MB) 2 Speed (Read) DVD-ROM DVD-RAM CD-ROM 8x 1x 24x Speed (Write) CD-R CD-RW DVD-R DVD-[...]

  • Página 35

    1.7 DVD-Multi (CD-R/RW DVD-RAM/R/RW) Drive 1 Hardware Overview 1.7 DVD-Multi (CD-R/RW DVD-RAM/R/RW) Drive This drive is a combination of CD-R/RW, DVD-R/RW and DVD-RAM Drive. It is full-size and runs either 12cm (4.72-inch) or 8cm (3.15-inch) DVD/CDs without an adaptor. This drive reads CD-ROM at maximum 24-speed, reads DVD-ROM at maximum 8-speed wr[...]

  • Página 36

    1 Hardware Overview 1.7 DVD-Multi (CD-R/RW DVD-RAM/R/RW) Drive Table 1-5 DVD-Multi drive specifications (2/2) Item TEAC G8CC00013210 Matsushita G8CC00019210 Speed (Write) CD-R CD-RW DVD-R DVD-RW DVD-RAM 16x max.(ZCLV) 10x (CLV) 2x (CLV) 1x (CLV) 2x (ZLV) 16x (ZoneCLV) 8x (CLV) 2x (CLV) 1x (CLV) 2x (ZCLV) (4.7GB) Supported format CD: CD-DA CD-ROM CD[...]

  • Página 37

    1.8 Keyboard 1 Hardware Overview 1.8 Keyboard The keyboard is mounted 85(US)/86(UK) keys that consist of character key and control key, and in conformity with JIS. The keyboard is connected to mem brane connector on the system board and controlled by the keyboard controller. Figure 1-9 is a view of the keyboard. See Appendix E about a layout of the[...]

  • Página 38

    1 Hardware Overview 1.9 TFT Color Display 1.9 TFT Color Display The TFT color display consists of 15.4-inch WXGA LCD module and FL inverter board. 1.9.1 LCD Module A high-resolution external monitor connected to the computer can display up to 2048(H) × 1536(V), at 16M colors. Figure 1-10 shows a view of the LCD module and Table 1-6 lists the speci[...]

  • Página 39

    1.9 TFT Color Display 1 Hardware Overview Table 1-6 LCD module specifications (2/5) Specifications Item 15.4-inch WXGA (G33C0001F110) Number of Dots 1,280 (W) x 800 (H) Dot spacing (mm) 0.25875 (H) x 0.25875 (V) Display range (mm) 332.16(H) x 207.6(V) Table 1-6 LCD module specifications (3/5) Specifications Item 15.4-inch WXGA (G33C0001H110) Number[...]

  • Página 40

    1 Hardware Overview 1.9 TFT Color Display 1.9.2 FL Inverter Board The FL inverter board supplies a high frequency current to illuminate the LCD module FL. Table 1-7 lists the FL inverter board specifications. Table 1-7 FL inverter board specifications Item Specifications Voltage (V) DC 5 Input Power (W) 7 Voltage (V) 750 Current (mA) 6.00 Output Po[...]

  • Página 41

    1.10 Power Supply 1 Hardware Overview 1.10 Power Supply The power supply supplies many different voltages to the system board and perform s the following functions: 1. Checks power input to determine: Whether the AC adaptor is connected to the computer • • • • • • • • • • • • • • • • • • Whether the battery pack [...]

  • Página 42

    1 Hardware Overview 1.10 Power Supply Table 1-8 Power supply output rating (1/2) Name Voltage (V) Use PPV 1.468-0.748 CPU MCH1R2- P1V 1.2 Odem PTV 1.075 CPU, ADM1032, Odem, ICH4-M 2R5-B2V 2.5 Odem, SDRAM 2R5-P2V 2.5 NV34 1R25-B1V 1.25 SDRAM PGV 1.2-1.5 NV34 LAN-E3V 3.3 ICH4-M, KINNERETH S3V 3.3 ICH4-M, EC/KBC B3V 3.3 YEBISU3S, PC Card ,MDC P3V 3.3 [...]

  • Página 43

    1.10 Power Supply 1 Hardware Overview Table 1-8 Power supply board output rating (2/2) Name Voltage (V) Use S5V 5 OZ168 MCV 5 PSC A4R7-P4V 4.7 STAC9750, MIC CDA4R7-E4V 4.7 CD, Headphone R3V 2.0-3.3 ICH4-M Satellite M30-35 Maintenance Manual (960-455) 1-29[...]

  • Página 44

    1 Hardware Overview 1.11 Batteries 1.11 Batteries The computer has three types of batteries as follows:  Main battery pack  RTC battery The battery specifications are listed in Table 1-9. Table 1-9 Battery specifications Battery name Material Output v oltage Capacity Main battery Lithium-Ion (6-cell) 10.8 V 4,400mAh Lithium-Ion (12 cell) 10.8[...]

  • Página 45

    1.11 Batteries 1 Hardware Overview 1.11.2 Battery Charging Control Battery charging is controlled by a power supply microprocessor. The microprocessor controls whether the charge is on or off and detects a full charge when the AC adaptor and battery are attached to the computer. The system charges the battery using quick charge. Quick Battery Charg[...]

  • Página 46

    1 Hardware Overview 1.11 Batteries 1-32 Satellite M30-35 Maintenance Manual (960-455) 1.11.3 RTC battery The RTC battery provides power to keep the current date, time and other setup information in memory while the com puter is turned off. Table 1-11 lists the charging time and data preservation period of the RTC battery. Table 1-11 RTC battery cha[...]

  • Página 47

    Chapter 2 Troubleshooting Procedures[...]

  • Página 48

    2 Troubleshooting Procedures 2-ii Satellite M30-35 Maintenance Manual (960-455)[...]

  • Página 49

    2 Troubleshooting Procedures Chapter 2 Contents 2.1 Troubleshooting ......................................................................................................... 2-1 2.2 Troubleshooting Flowchart ....................................................................................... 2-2 2.3 Power Supply Troubleshooting .................[...]

  • Página 50

    2 Troubleshooting Procedures Procedure 1 External Monitor Check ............................................................ 2-40 Procedure 2 Diagnostic Test Program Execution Check .............................. 2-40 Procedure 3 Connector and Cable Check...................................................... 2-41 Procedure 4 Replacement Check......[...]

  • Página 51

    2 Troubleshooting Procedures Figures Figure 2-1 Troubleshooting flowchart ............................................................................ 2-3 Figure 2-2 A set of tool for debug port test ................................................................... 2-20 Figure 2-3 Antenna test cable ...............................................[...]

  • Página 52

    2 Troubleshooting Procedures 2-vi Satellite M30-35 Maintenance Manual (960-455)[...]

  • Página 53

    2.1 Troubleshooting 2 Troubleshooting Procedures 2 2.1 Troubleshooting Chapter 2 describes how to determine if a Fi eld Replaceable Unit (FRU) in the com puter is causing the computer to malfunction. The FRUs covered are: 1. Power supply 5. Keyboard 9. LAN 2. System Board 6. Display 10. Wireless LAN 3. Floppy Disk Drive 7. Optical Drive 11. Sound c[...]

  • Página 54

    2 Troubleshooting Procedures 2.2 Troubleshooting Flowchart 2.2 Troubleshooting Flowchart Use the flowchart in Figure 2-1 as a guide fo r determining which troubleshooting procedures to execute. Before going through the fl owchart steps, verify the following:  Ask the user if a password is registered and, if it is, ask him or her to enter the pas[...]

  • Página 55

    2.2 Troubleshooting Flowchart 2 Troubleshooting Procedure s Figure 2-1 Troubleshooting flowchart (1/2) Satellite M30-35 Main tenance Manual (960-455) 2-3[...]

  • Página 56

    2 Troubleshooting Procedures 2.2 Troubleshooting Flowchart Figure 2-1 Troubleshooting flowchart (2/2) 2-4 Satellite M30-35 Maintenan ce Manual (960-455)[...]

  • Página 57

    2.2 Troubleshooting Flowchart 2 Troubleshooting Procedure s If the diagnostics program cannot detect an erro r, the problem may be intermittent. The Running Test program should be executed severa l times to isolate the problem . Check the Log Utilities function to confirm which diagnostic test detected an erro r, then perform the appropriate troubl[...]

  • Página 58

    2 Troubleshooting Procedures 2.3 Power Supply Troubleshooting 2.3 Power Supply Troubleshooting The power supply controls many functions and components. To determ ine if the power supply is functioning properly, star t with Procedure 1 and continue with the other Procedures as instructed. The procedures described in this section are: Procedure 1: Ic[...]

  • Página 59

    2.3 Power Supply Troubleshooting 2 Troubleshooting Procedures Table 2-2 DC IN icon DC IN icon Power supply status Lights blue DC power i s being supplied from the AC adapter. Blinks orange Power supply malfunction *3 Doesn’t light Any condition other than those above *3 When the power supply controller detects a m alfuncti on, the DC IN LED blink[...]

  • Página 60

    2 Troubleshooting Procedures 2.3 Power Supply Troubleshooting Procedure 2 Error Code Check If the power supply microprocessor detects a ma lfunction, the DC IN icon blinks orange. The blink pattern indicates an error as shown below.  Start Off for 2 seconds  Error code (8 bit) “1” On for one second “0” On for a half second Interval be[...]

  • Página 61

    2.3 Power Supply Troubleshooting 2 Troubleshooting Procedures Check 1 Convert the DC IN icon blink patt ern into the hexadecimal error code and compare it to the tables below. The error code begins with the least significant digit. Error code Table 2-3 Error code Error code Where Error occurs 1*h DC Power (AC Adapte r) 2*h The 1st battery 4*h S3V o[...]

  • Página 62

    2 Troubleshooting Procedures 2.3 Power Supply Troubleshooting Check 1 Compare the patterns in the hexadeci mal error code to the tables below.  DC IN Error code Meaning 10h AC Adaptor output voltage is over 16.5 V. 11h Advanced Port Replicator output voltage is over 16.5 V. 12h Current from the DC power supply is over the limit (7.00 A). 13h Cur[...]

  • Página 63

    2.3 Power Supply Troubleshooting 2 Troubleshooting Procedures  1R8-C1V output Error code Meaning 60h 1R8-C1V voltage is over 2.16 V, w hen the computer is powered on/ off. 61h 1R8-C1V voltage is 1.53 V or under , when the computer is p owered on. 62h 1R8-C1V voltage is 1.53 V or under, when the com puter is booting up. 63h 1R8-C1V voltage is 1.5[...]

  • Página 64

    2 Troubleshooting Procedures 2.3 Power Supply Troubleshooting  E3V output Error code Meaning A0h E3V voltage is over 3.96 V, w hen the computer is powered on/off. A1h E3V voltage is 2.81 V or under, when the computer is powered on. A2h E3V voltage is 2 .81 V or under, when the computer is booting up. A3h E3V voltage is 2.81 V or over, when the c[...]

  • Página 65

    2.3 Power Supply Troubleshooting 2 Troubleshooting Procedures  1R25-P1V output Error code Meaning D0h 1R25-P1V voltage is ove r 1.50 V, when the computer is powered on/off. D1h 1R25-P1V voltage is 1.06 3 V or under, when the computer i s powered on. D2h 1R25-P1V voltage 1.063 V or under, when the comput er is booting up. D3h 1R25-P1V voltage is [...]

  • Página 66

    2 Troubleshooting Procedures 2.3 Power Supply Troubleshooting Procedure 3 Connection Check The power supply wiring diagram is shown below: Any of the connectors may be disconnected. Perform Check 1. Check 1 Disconnect the AC power cord from the wall outlet. Check the power cable for breaks. If the power cord is damaged, conn ect a new AC power co r[...]

  • Página 67

    2.3 Power Supply Troubleshooting 2 Troubleshooting Procedures Procedure 4 Charge Check The power supply may not charge the battery pack. Perform the following procedures: 1. Reinstall the battery pack. 2. Attach the AC adaptor and turn on the pow er. If you cannot turn on the power, go to Procedure 5. 3. Run the Diagnostic test, go to System te st [...]

  • Página 68

    2 Troubleshooting Procedures 2.3 Power Supply Troubleshooting Procedure 5 Replacement Check The system board processor module m ay be disconnected or damaged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures . Check the connection between the AC adaptor and syst em board. After checking the connections, pe[...]

  • Página 69

    2.4 System Board Troubleshooting 2 Troubleshooting Procedures 2.4 System Board Troubleshooting This section describes how to determine if the system board is defective or not. Start with Procedure 1 and continue with the other proced ures as instructed. The procedures described in this section are: Procedure 1: Message Check Procedure 2: Debugging [...]

  • Página 70

    2 Troubleshooting Procedures 2.4 System Board Troubleshooting Procedure 1 Message Check When the power is turned on, the system perfor ms the Initial Reliability T est (IRT) installed in the BIOS ROM. The IRT tests each IC on the system board and initializes it.  If an error message is shown on the display, perform Check 1.  If nothing is dis[...]

  • Página 71

    2.4 System Board Troubleshooting 2 Troubleshooting Procedures Check 3 The IRT checks the system board. When the IRT detects an error, the system stops or an error message appears. If error message (5) appears, go to th e Keyboard Troubleshooting Procedures in Section 2.7. If error message (1), (2), (3) or (4) appears, go to the HDD Troubleshooting [...]

  • Página 72

    2 Troubleshooting Procedures 2.4 System Board Troubleshooting Procedure 2 Debugging Port Check on Boot Mode Check the D port status by a debug port test. Th e tool for debug port test is shown below. Figure 2-2 A set of to ol for debug port test The test procedures are follows; 1. Connect the debug test cable to the c onnector PJ2000 of the system [...]

  • Página 73

    2.4 System Board Troubleshooting 2 Troubleshooting Procedures 5. Execute GETDPORT.COM in the text menu in CPU REAL mode. (Insert the FD for starting D port into FDD and input “FD starting drive:>dport”.) The D port status is displayed in the following form; 6. When the D port status is FFFFh ( normal status), go to Procedure 3. 7. When the D[...]

  • Página 74

    2 Troubleshooting Procedures 2.4 System Board Troubleshooting Table 2-4 Debugging port boot mode status (2/7) Debug Port Description 0098h Initialize USB Controller 0101h 0102h Verify Real Mode. If the CPU is in protected mode, turn on A20 and pulse the reset line, forcing a shutdown 0. 0103h Disable Non-Maskable Interrupts. 0104h Get CPU type from[...]

  • Página 75

    2.4 System Board Troubleshooting 2 Troubleshooting Procedures Table 2-4 Debugging port boot mode status (3/7) Debug Port Description 0129h Initialize the POST Memory Manager 012Ah Zero clear the first 512K of RAM 012Bh 012Ch Test 512K base address lines 012Eh Test the first 4MB of RAM. 012Fh Initialize external cache before shadowing. 0132h Compute[...]

  • Página 76

    2 Troubleshooting Procedures 2.4 System Board Troubleshooting 0152h Table 2-4 Debugging port boot mode status (4/7) Debug Port Description 0154h 0155h 0157h 0158h Test for unexpected interru pts. 0159h Initialize the POST display servi ce. 015Ah Display prompt "Press F2 for SETUP" 015Bh Disable L1 cache during POST 015Ch Test RAM between [...]

  • Página 77

    2.4 System Board Troubleshooting 2 Troubleshooting Procedures 0185h Configure all PnP ISA devices. 0186h Table 2-4 Debugging port boot mode status (5/7) Debug Port Description 0187h Configure motherboar d configurable devices. 0188h Initialize timeouts, key buffer, and soft reset flag. 0189h Enable non-maskable interrupts. 018Ah Initialize Extended[...]

  • Página 78

    2 Troubleshooting Procedures 2.4 System Board Troubleshooting 01AEh Clear CMOS flags for post. 2-26 Satellite M30-35 Main tenance Manual (960-455)[...]

  • Página 79

    2.4 System Board Troubleshooting 2 Troubleshooting Procedures Table 2-4 Debugging port boot mode status (6/7) Debug Port Description 01B0h Check for errors. 01B1h 01B2h Change status bits in CMOS and/or the BIOS data area to reflect the fact that POST is complete. 01B3h 01B5h Fade out logo screen. 01B6h 01B7h Initialize ACPI BIOS. 01B9h Clear all s[...]

  • Página 80

    2 Troubleshooting Procedures 2.4 System Board Troubleshooting Table 2-4 Debugging port boot mode status (7/7) Debug Port Description 01D7h 01D8h 20FFh Try to boot with INT 19h. 03B0h 05B1h 05B2h 05B3h 05B4h 05B5h 06BFh 2-28 Satellite M30-35 Main tenance Manual (960-455)[...]

  • Página 81

    2.4 System Board Troubleshooting 2 Troubleshooting Procedures Procedure 3 Diagnostic Test Program Execution Check Execute the following tests from the Di agnostic Test Menu. Refer to Chapter 3, Tests and Diagnostics, for more inform ation on how to perform these tests. 1. System test 2. Memory test 3. Keyboard test 4. Display test 5. Floppy Disk te[...]

  • Página 82

    2 Troubleshooting Procedures 2.4 System Board Troubleshooting Procedure 4 Replacement Check The system board connectors may be disconnect ed. Disassemble the com puter following the steps described in Chapter 4, Replacement Procedures and perform Check 1. Check 1 Visually check for the following: a) Cracked or broke n connector housing b) Dam aged [...]

  • Página 83

    2.5 FDD Troubleshooting 2 Troubleshooting Procedures 2.5 FDD Troubleshooting This section describes how to determine if the FDD is functioning properly. Perform the steps below starting with Procedure 1 and con tinuing with the other pr ocedures as required. Procedure 1: FDD Head Cleaning Check Procedure 2: Diagnostic Te st Program Execution Check [...]

  • Página 84

    2 Troubleshooting Procedures 2.5 FDD Troubleshooting Procedure 2 Diagnostic Test Program Execution Check Insert the Diagnostics Disk in the FDD, turn on the computer and run the test. Refer to Chapter 3, Tests and Diagnostics, for more inform ation about th e diagnostics test procedures. Floppy disk drive test error code s and their status names ar[...]

  • Página 85

    2.5 FDD Troubleshooting 2 Troubleshooting Procedures Procedure 3 Connector Check and Replacement Check The 3.5inch FDD is connected to the System Board via USB port. Check 1 Make sure the USB cable is securely connected to the FDD. Also, make sure the USB cable of the FDD is securely connected to the system board. If any of the connections are loos[...]

  • Página 86

    2 Troubleshooting Procedures 2.6 HDD Troubleshooting 2.6 HDD Troubleshooting This section describes how to determine if the HDD is functioning properly. Perform the steps below starting with Procedure 1 and con tinuing with the other pr ocedures as required. Procedure 1: Message Check Procedure 2: Partition Check Procedure 3: Format Check Procedure[...]

  • Página 87

    2.6 HDD Troubleshooting 2 Troubleshooting Procedures Procedure 2 Partition Check Insert the Toshiba MS-DOS system di sk and restart the computer with U key holding down. Perform the following checks: Check 1 Type C : and press Enter . If you cannot change to drive C, go to Check 2. If you can change to drive C, go to Check 3. Check 2 Type FDISK and[...]

  • Página 88

    2 Troubleshooting Procedures 2.6 HDD Troubleshooting Procedure 3 Format Check The computer’s HDD is formatted using the low level format program and the MS-DOS FORMAT program. To format the HDD, start with Check 1 below and perform the other steps as required. Check 1 Format the HDD and transfer system files using FORMAT C:/S/U . If the following[...]

  • Página 89

    2.6 HDD Troubleshooting 2 Troubleshooting Procedures Procedure 4 Diagnostic Test Program Execution Check The HDD test program is stored in the Diagnosti cs Disk. Perform all of the HDD tests in the Hard Disk Drive Test. Refer to Chapter 3, Tests and Diagnostics, for more information about the HDD test program. If an error is detected duri ng the HD[...]

  • Página 90

    2 Troubleshooting Procedures 2.6 HDD Troubleshooting Procedure 5 Connector Check and Replacement Check The HDD may be disconnected, or the HDD or the system board may be dam aged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and perform the following checks: Check 1 Make sure the HDD is firmly connecte[...]

  • Página 91

    2.7 Keyboard Troubleshooting 2 Troubleshooting Procedures 2.7 Keyboard Troubleshooting To determine if the computer’s keyboard is functioning properly, perform the following procedures. Start with Procedure 1 and continue with the other procedures as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector and Repl[...]

  • Página 92

    2 Troubleshooting Procedures 2.7 Keyboard Troubleshooting Procedure 2 Connector and Replacement Check The keyboard, PAD I/F and PAD Switch may be disconnected or damaged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: 1. If the keyboard malfunctions, start with Check 1[...]

  • Página 93

    2.8 Display Troubleshooting 2 Troubleshooting Procedures 2.8 Display Troubleshooting This section describes how to determine if the computer’s display is functioning properly. Start with Procedure 1 and continue with the other procedures as instructed. Procedure 1: External Monitor Check Procedure 2: Diagnostic Te st Program Execution Check Proce[...]

  • Página 94

    2 Troubleshooting Procedures 2.8 Display Troubleshooting Procedure 3 Connector and Cable Check The LCD Module is connected to the system board by an LCD/FL cable. The FL inverter board is also connected to the system board by an LCD/FL cable. And the FL is connected to the FL inverter board by the HV cable. The c onnectors may be disconnected from [...]

  • Página 95

    2.8 Display Troubleshooting 2 Troubleshooting Procedures Procedure 4 Replacement Check The FL, FL inverter board, LCD module, and system board are connected to display circuits. Any of these components may be damaged. Refer to Chapter 4, Replacement Procedures, for instructions on how to disassemble the computer and then perform the following check[...]

  • Página 96

    2 Troubleshooting Procedures 2.9 Optical Drive Troubleshooting 2.9 Optical Drive Troubleshooting This section describes how to determine if th e Optical Drive is func tioning properly. Perform the steps below starting with Procedure 1 and co ntinue with the other procedures as required. Procedure 1: Diagnostic Te st Program Execution Check Procedur[...]

  • Página 97

    2.9 Optical Drive Troubleshooting 2 Troubleshooting Procedures Procedure 2 Connector Check and Replacement Check The Optical Drive is connected to the syst em board. The connectors may be disconnected from the system board or m ay be damaged. Disassemble the com puter following the steps described in Chapter 4, Replacement Procedures and perform th[...]

  • Página 98

    2 Troubleshooting Procedures 2.10 Modem Troubleshooting 2.10 Modem Troubleshooting This section describes how to determine if the computer' s modem is functioning properly. Perform the steps below starting with Procedure 1 and continui ng with the other procedures as required. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: [...]

  • Página 99

    2.10 Modem Troubleshooting 2 Troubleshooting Procedures Procedure 2 Connector Check and Replacement Check The Modem is installed as a modem daughter ca rd (MDC). If the modem m alfunctions, there may be a bad connection between the MDC a nd the System Board. Or the MDC, System Board or their connectors might be damaged. Disassemble the computer fol[...]

  • Página 100

    2 Troubleshooting Procedures 2.12 LAN Troubleshooting 2.11 LAN Troubleshooting This section describes how to determine if the computer's LAN is functioning properly. Perform the steps below starting with Procedure 1 and continui ng with the other procedures as required. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connect[...]

  • Página 101

    2.12 Wireless LAN Troubleshooting 2 Troubleshooting Procedures 2.12 Wireless LAN Troubleshooting This section describes how to determine if the computer's W ireless LAN is functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required. Procedure 1: Transm itting-Receiving Check Proc[...]

  • Página 102

    2 Troubleshooting Procedures 2.12 Wireless LAN Troubleshooting Procedure 2 Antennas' Connection Check The wireless LAN wiring diagram is shown below: Any of the connections may be disconnected. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: Check 1 Make sure the w[...]

  • Página 103

    2.12 Wireless LAN Troubleshooting 2 Troubleshooting Procedures Procedure 3 Antenna Check Check 1 Use an antenna test cable to check the antennas' connection. Follow the steps below: 1. Remove the wireless LAN slot cover and lift it off. Refer to Chapter 4, Replacement Procedures , for detailed steps of disassembling. 2. Disconnect the wireless[...]

  • Página 104

    2 Troubleshooting Procedures 2.12 Wireless LAN Troubleshooting Procedure 4 Replacement Check The wireless LAN board is connected to the pow er board and the system board. Any of these components may be damaged. Refer to Chapter 4, Replacement Procedures, for instructions on how to disassemble the computer and then perform the following checks: Chec[...]

  • Página 105

    2.13 Sound Troubleshooting 2 Troubleshooting Procedures 2.13 Sound Troubleshooting This section describes how to determine if the computer's sound functions are functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required. Procedure 1: Diagnostic Te st Program Execution Check Proc[...]

  • Página 106

    2 Troubleshooting Procedures 2.13 Sound Troubleshooting Procedure 2 Connector Check The sound function wiring diagram is shown below: Any of the connections may be disconnected. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and perform the following checks: If the stereo speakers do not wo rk correctly,[...]

  • Página 107

    2.13 Sound Troubleshooting 2 Troubleshooting Procedures Procedure 3 Replacement Check Check 1 If the stereo speakers do not sound pr operly, they may be defective or damaged. Replace them with new ones. If the stereo speakers still do no t work properly, go to Check 5. Check 2 If headphones does sound properly, th e headphone jack may be defective [...]

  • Página 108

    2 Troubleshooting Procedures 2.14 SD Card Slot Troubleshooting 2.14 SD Card Slot Troubleshooting To check if the SD card/Smart Media slot is good or no good, follow the troubleshooting procedures below as instructed. Procedure 1: Check on Windows Procedure 2: Connector/R eplacement Check Procedure 1 Check on Windows Insert an SD card into the sl ot[...]

  • Página 109

    2.14 SD Card Slot Troubleshooting 2 Troubleshooting Procedures Satellite M30-35 Main tenance Manual (960-455) 2-57[...]

  • Página 110

    Chapter 3 Tests and Diagnostics[...]

  • Página 111

    3 Tests and Diagnostics 3-ii Satellite M30-35 Maintenance Manual (960-455)[...]

  • Página 112

    3 Tests and Diagnostics Chapter 3 Contents 3.1 The Diagnostic Test ................................................................................................... 3-1 3.2 Executing the Diagnostic Test ................................................................................... 3-3 3.3 Subtest Names .......................................[...]

  • Página 113

    3 Tests and Diagnostics 3-iv Satellite M30-35 Maintenance Manual (960-455) 3.23 System Configuration .............................................................................................. 3-47 3.23.1 Function Description .......................................................................... 3-47 3.23.2 Operations .......................[...]

  • Página 114

    3.1 The Diagnostic Test 3 Tests and Diagnostics 3 3.1 The Diagnostic Test This chapter explains how to use the Diagnostic Test program to test the functions of the computer’s hardware modules. The Diagnostic Test Program is stored on the Diagnostic Disk. The Diagnostic Test program consists of eight programs that are grouped into the Service Prog[...]

  • Página 115

    3 Tests and Diagnostics 3.1 The Diagnostic Test You will need the following equipment to perform som e of the Diagnostic test programs.  The Diagnostics Disk (all tests)  A formatted working disk for the floppy disk drive test  An external FDD attachment  A cleaning kit to clean the floppy disk drive heads (Head Cleaning)  A cleaning[...]

  • Página 116

    3.2 Executing the Diagnostic Test 3 Tests and Diagnostics 3.2 Executing the Diagnostic Test Toshiba MS-DOS is required to run the DIAGNOSTICS TEST PROGRAM. To start the DIAGNOSTIC TEST PROGRAM, follow these steps: 1. Insert the Diagnostics disk in the floppy disk drive and turn on the computer while pressing F key. (The Diagnostics Disk contains th[...]

  • Página 117

    3 Tests and Diagnostics 3.2 Executing the Diagnostic Test 2. To execute the DIAGNOSTIC TEST MENU from the DIAGNOSTICS MENU, set the highlight bar to 1 , and press Enter . The following DIAGNOSTIC TEST MENU will appear: TOSHIBA Personal Computer XXXXXX DIAGNOSTICS Version X.XX (C) Copyright TOSHIBA Corp. XXXX DIAGNOSTIC TEST MENU : 1 - SYSTEM TEST 2[...]

  • Página 118

    3.2 Executing the Diagnostic Test 3 Tests and Diagnostics 3. Select the test you want to execute and press Enter . When SYSTEM TEST is selected, the following message will appear: SYSTEM TEST XXXXXXX XXX DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end [Ctrl]+[C] : key stop SUB-TEST : XX PASS COUNT : XXXXX ERROR COUNT : XXXXX WRITE DATA : XX READ DA[...]

  • Página 119

    3 Tests and Diagnostics 3.2 Executing the Diagnostic Test 5. The following message will appear: ERROR STOP : YES/NO Selecting YES stops the test program when an error is found and displays the operation guide on the right side of the display screen as shown below: ERROR STATUS NAME [[ HALT OPERATION ]] 1: Test end 2: Continue 3: Retry These three s[...]

  • Página 120

    3.3 Subtest Names 3 Tests and Diagnostics 3.3 Subtest Names Table 3-1 lists the subtest names for each test program in the DIAGNOSTIC TEST MENU. Table 3-1 Subtest names (1/2) No. Test Name Subtest No. Subtest Name 1 SYSTEM 01 04 05 06 07 08 10 ROM checksum Fan ON/OFF Geyserville Quick charge DMI read DMI write CPU Temperature 2 MEMORY 01 02 04 05 0[...]

  • Página 121

    3 Tests and Diagnostics 3.3 Subtest Names Table 3-1 Subtest names (2/2) No. Test Name Subtest No. Subtest Name 6 PRINTER 01 02 03 Ripple pattern Function Wrap around 7 ASYNC 06 07 FIR/SIR Point to point (send) FIR/SIR Point to point (receive) 8 HARD DISK 01 02 03 04 06 07 09 10 Sequential read Address uniqueness Random address/data Cross talk &[...]

  • Página 122

    3.4 System Test 3 Tests and Diagnostics 3.4 System Test To execute the System Test select 1 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter . Subtest 01 ROM Checksum This subtest executes a checksum test of the BIOS ROM (range: F0000h to FF[...]

  • Página 123

    3 Tests and Diagnostics 3.4 System Test Subtest 07 DMI read This subtest displays the information in the Flash-ROM in the following format. *** DMI Data Display Ver X.XX *** Model Name : XXXXXXXXXXX Version Number : XXXXXXXXXXXX Serial Number : XXXXXXXX Model Number : XXXXXX-XXXXX PCN/BND Number : XXXXXXXXXXXX/XXXXXXXXXXX UUID Number : XXXXXXXXXXXX[...]

  • Página 124

    3.4 System Test 3 Tests and Diagnostics 7. “Create DMIINFO TXT (Y/N) ?” is displayed. Press Y, then the DMI information (text data) is written to the Floppy disk, etc. Subtest 10 CPU Temperature This subtest checks the CPU temperature. When the subtest starts, the following message appears on the display. Enter the ambient Celsius temperature. [...]

  • Página 125

    3 Tests and Diagnostics 3.5 Memory Test 3.5 Memory Test To execute the Memory Test, select 2 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter . Subtest 01 Conventional memory This subtest writes a constant data to conventional memory (0 to 6[...]

  • Página 126

    3.6 Keyboard Test 3 Tests and Diagnostics 3.6 Keyboard Test To execute the Keyboard Test, select 3 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter . Subtest 01 Pressed key display When you execute this subtest, the keyboard layout is drawn [...]

  • Página 127

    3 Tests and Diagnostics 3.6 Keyboard Test Subtest 04 Touch Pad This subtest checks the functions of the touch pad as shown below. A) Direction and parameter B) Switching function check. This test displays the response from the touch pad and touch pad switch. When moving your finger on the touch pad towards the upper left, the <POINTING> displ[...]

  • Página 128

    3.6 Keyboard Test 3 Tests and Diagnostics Subtest 05 USB (Port 0, Port1) test This subtest checks USB. The USB TEST Module (ZD0003P01) and USB Cable (ZD0003P02) must be connected to the computer. The following message will appear. Select a port to test and press Enter . Test port number select (1:Port0, 2:Port1, 0:Port0&1) ? If the test ends su[...]

  • Página 129

    3 Tests and Diagnostics 3.7 Display Test 3.7 Display Test To execute the Display Test, select 4 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter . Subtest 01 VRAM read/write for VGA This subtest writes the constant data (AAh and 55h) to the [...]

  • Página 130

    3.7 Display Test 3 Tests and Diagnostics Subtest 04 Gradation & Mode test for VGA This subtest displays gradations for following modes. To change the mode, press Enter . [Mode 12] [Mode 13] [Mode 3] [Mode 111 640*480 64K] [Mode 112 640*480 16M] [Mode 114 800*600 64K] [Mode 115 800*600 16M] [Mode 117 1024*768 64K] [Mode 118 1024×768 16M] The di[...]

  • Página 131

    3 Tests and Diagnostics 3.7 Display Test Subtest 06 “H” Pattern Display This subtest displays a full screen of “H” patterns. HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHH[...]

  • Página 132

    3.8 Floppy Disk Test 3 Tests and Diagnostics 3.8 Floppy Disk Test CAUTION : Before running the floppy disk test, prepare a formatted work disk. Remove the Diagnostics Disk and insert the work disk into the FDD. The contents of the floppy disk will be erased. To execute the Floppy Disk Test, select 5 from the DIAGNOSTIC TEST MENU, press Enter and fo[...]

  • Página 133

    3 Tests and Diagnostics 3.8 Floppy Disk Test Select the number of the subtest you want to execute and press Enter . The following message will appear during the floppy disk test. FLOPPY DISK IN PROGRESS XXXXXXX xxx DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end [Ctrl]+[C] : key stop SUB-TEST : XX PASS COUNT : XXXXX ERROR COUNT : XXXXX WRITE DATA :[...]

  • Página 134

    3.9 Printer Test 3 Tests and Diagnostics 3.9 Printer Test To execute the Printer Test, select 6 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. The following messages will appear af ter selecting the Printer Test from the DIAGNOSTIC TEST MENU. Answer each of the questions with an appropriate response to execute t[...]

  • Página 135

    3 Tests and Diagnostics 3.9 Printer Test Subtest 02 Function This subtest is for IBM compatible printers, and tests the following f unctions: Normal print Double-width print Compressed print Emphasized print Double-strike print All characters print This subtest prints the various print types shown below: Subtest 03 Wraparound NOTE : To execute this[...]

  • Página 136

    3.10 Async Test 3 Tests and Diagnostics 3.10 Async Test To execute the Async Test, select 7 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions displayed on the screen. Move the highlight bar to the subtest you want to execute and press Enter . Subtests 06 and 07 require the following data format: Method: Asynchronous Speed: 38400B[...]

  • Página 137

    3 Tests and Diagnostics 3.11 Hard Disk Test 3.11 Hard Disk Test To execute the Hard Disk Test, select 8 from the DIAGNOSTIC TEST MENU, press Enter , and follow the directions on the screen. CAUTION : The contents of the hard disk will be erased when subtest 01, 02, 03, 04, 06, 07,09, or 10 is executed. Before running the test, the customer should t[...]

  • Página 138

    3.11 Hard Disk Test 3 Tests and Diagnostics 3. The Hard Disk Test message will appear after you respond to the Detail Status prompt. Select the number of the subtest you want to execute and press Enter . The following message will appear during each subtest. HARD DISK TEST XXXXXXX XXX DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end [Ctrl]+[C] : key[...]

  • Página 139

    3 Tests and Diagnostics 3.11 Hard Disk Test 3-26 Satellite M30-35 Maintenance Manual (960-455) Subtest 04 Cross talk & peak shift This subtest writes eight types of worst pattern data (listed below) to a cylinder, then reads the data while moving from cylinder to cylinder. (Test the data interference in the neighbor track) Worst pattern data Cy[...]

  • Página 140

    3.12 Real Timer Test 3 Tests and Diagnostics 3 3.12 Real Timer Test To execute the Real Timer Test, select 9 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter . Subtest 01 Real time A new date and time can be input during this subtest. To exe[...]

  • Página 141

    3 Tests and Diagnostics 3.12 Real Timer Test Subtest 03 Real time carry CAUTION : When this subtest is executed, the current date and time are erased. This subtest checks the real time clock increments, m aking sure the date and time are displayed in the following form at: Current date : 12-31-1999 Current time : 23:59:58 The real time increments a[...]

  • Página 142

    3.13 NDP Test 3 Tests and Diagnostics 3.13 NDP Test To execute the NDP test, select 10 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen. Subtest 01 NDP This test checks the following functions of NDP:  Control word  Status word  Bus  Addition  Multiplication Satellite M30-35 Maintenance Manual (960-[...]

  • Página 143

    3 Tests and Diagnostics 3.14 Expansion Test 3.14 Expansion Test To execute the expansion test, select 11 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen. NOTE: To execute this subtest, the PC card wraparound connector is required. Subtest 01 PCMCIA wrap around This subtest checks the following signal line of the [...]

  • Página 144

    3.15 CD-ROM/DVD-ROM Test 3 Tests and Diagnostics 3.15 CD-ROM/DVD-ROM Test To execute the CD-ROM/DVD test, select 13 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen. NOTE : For the subtest 01, 02 and 03, use the TOSHIBA CD-ROM TEST DISK (ZA1217P01/P000204190) for CD-ROM and DVD-ROM TEST DISK TSD-1 for DVD-ROM. For[...]

  • Página 145

    3 Tests and Diagnostics 3.16 LAN test 3.16 LAN test To execute the LAN test, select 14 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen. The LAN test contains one subtest. Subtest 01 LAN MAC ADDRESS DISPLAY This subtest reads MAC ADDRESS and displays it. Press Enter to exit. 3-32 Satellite M30-35 Maintenance Manua[...]

  • Página 146

    3.17 Error Code and Error Status Names 3 Tests and Diagnostics 3.17 Error Code and Error Status Names Table 3-2 lists the error codes and error status names for the Diagnostic Test. Table 3-2 Error codes and error status names (1/3) Device name Error code Error status name (Common) FF Data Compare Error System 01 02 03 ROM Checksum Error Location I[...]

  • Página 147

    3 Tests and Diagnostics 3.17 Error Code and Error Status Names Table 3-2 Error codes and error status names (2/3) Device name Error code Error status name ASYNC 01 02 04 08 10 20 40 50 60 70 80 DSR On Time Out CTS On Time Out RX-READY Time Out TX-FULL Time Out Parity Error Framing Error Overrun Error Underrun error Timer time out error CRC error Li[...]

  • Página 148

    3.17 Error Code and Error Status Names 3 Tests and Diagnostics Table 3-2 Error codes and error status names (3/3) Device name Error code Error status name Expansion C1 C2 C3 C4 C5 C6 C7 C8 CB CD Address Line Error REG# Line Error CE#1 Line Error CE#2 Line Error DATA Line Error WAIT Line Error BSY# Line Error BVD1 Line Error ZV Port Error No PCMCIA [...]

  • Página 149

    3 Tests and Diagnostics 3.18 Hard Disk Test Detail Status 3.18 Hard Disk Test Detail Status When an error occurs in the hard disk test, the following message is displayed: HDC status = XXXXXXXX Detailed information about the hard disk test error is displayed on the screen by an eight-digit number. The first four digits represent the hard disk contr[...]

  • Página 150

    3.18 Hard Disk Test Detail Status 3 Tests and Diagnostics Table 3-4 Error register contents Bit Name Description 7 BBK (Bad block mark) “0” … Not used “1” … A bad block mark is detected. 6 UNC (Uncorrectable) “0” … There is no uncorrectable data error. “1” … Uncorrectable data error has been detected. 5 —— Not used 4 IDN[...]

  • Página 151

    3 Tests and Diagnostics 3.19 Head Cleaning 3.19 Head Cleaning 3.19.1 Function Description This function cleans the heads in the FDD by executing a series of head load/seek and read operations. A cleaning kit is necessary to perform this program. 3.19.2 Operations 1. Selecting test 4 from the DIAGNOSTIC MENU and pressing Enter displays the following[...]

  • Página 152

    3.20 Log Utilities 3 Tests and Diagnostics 3.20 Log Utilities 3.20.1 Function Description This function logs error information generated while a test is in progress and stores the results in RAM. This function can store data on a floppy disk or output the data to a printer. The error information is displayed in the following order: 1. Error count ([...]

  • Página 153

    3 Tests and Diagnostics 3.20 Log Utilities 3.20.2 Operations 1. Selecting 5 and pressing Enter in the DIAGNOSTIC MENU, logs error information into RAM or onto a floppy disk. The error information is displayed in the following format: XXXXX ERRORS CNT TS-NO PASS STS ADDR WD RD HSTS [ERROR STATUS NAME] 001 FDD 02 0000 103 00001 00 00 0000 FDD-WRITE P[...]

  • Página 154

    3.21 Running Test 3 Tests and Diagnostics 3.21 Running Test 3.21.1 Function Description This function automatically executes the following tests in sequence: 1. System test (subtest 01) 2. Memory test (subtests 01, 02 and 04) 3. Display test (subtest 01) 4. FDD test (subtest 02) 5. HDD test (subtests 01 and 05) 6. Real timer test (subtest 02) 7. Pr[...]

  • Página 155

    3 Tests and Diagnostics 3.22 Floppy Disk Drive Utilities 3.22 Floppy Disk Drive Utilities 3.22.1 Function Description This function formats the FDD, copies the floppy disk and displays the dump list for both the FDD and HDD. 1. FORMAT NOTE : This program is only for testing a floppy disk drive. The option is different from the Toshiba MS-DOS FORMAT[...]

  • Página 156

    3.22 Floppy Disk Drive Utilities 3 Tests and Diagnostics 3.22.2 Operations 1. Selecting 7 from the DIAGNOSTIC MENU and pressing Enter displays the following message: [ FDD UTILITIES ] 1 - FORMAT 2 - COPY 3 - DUMP 4 – HDD-ID READ 9 - EXIT TO DIAGNOSTICS MENU 2. FORMAT program (a) Selecting FORMAT displays the following message: DIAGNOSTICS - FLOPP[...]

  • Página 157

    3 Tests and Diagnostics 3.22 Floppy Disk Drive Utilities 3. COPY program (a) When COPY is selected, the following message appears: FLOPPY DISK FORMAT & COPY : VX.XX Type select (0:2DD,3:2HD) ? (b) Selecting a media/drive type number will display a message sim ilar to the one below: Insert source disk into drive A: Press any key when ready. (c) [...]

  • Página 158

    3.22 Floppy Disk Drive Utilities 3 Tests and Diagnostics 4. DUMP program (a) When DUMP is selected, the following message appears: DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX Drive type select (1:FDD, 2:HDD) ? (b) Select a drive type. If 2:HDD is selected, the display will go to step (h). If 1:FDD is selected, the following message will ap[...]

  • Página 159

    3 Tests and Diagnostics 3.22 Floppy Disk Drive Utilities 3-46 Satellite M30-35 Maintenance Manual (960-455) (k) The following message will appear. To finish the dump, select 3 . Press number key (1:up,2:down,3:end) ? (l) The following message will appear. Selecting 2 returns to the FDD UTILITIES MENU. Another dump (1:Yes,2:No) ? 5. HDD ID READ prog[...]

  • Página 160

    3.23 System Configuration 3 Tests and Diagnostics 3 3.23 System Configuration 3.23.1 Function Description The System Configuration program contains th e following configuration information for the computer: 1. Processor Type 2. VGA Controller 3. MS-DOS Version 4. BIOS ROM version (1st ID, 2nd ID) 5. Boot ROM version 6. KBC version 7. PS Microproces[...]

  • Página 161

    3 Tests and Diagnostics 3.23 System Configuration 3.23.2 Operations Selecting 8 from the DIAGNOSTIC MENU and pressing Enter displays the following system configuration: System Configuration Display : Ver X.XX [Machine Name ???] * - Processor Type = XXXXXX * - VGA Controller = XXXXXX * - MS-DOS Version = V7.XX * - BIOS ROM Version = VX.XX 1st ID = X[...]

  • Página 162

    3.24 Wireless LAN Test Program (Calexico) 3 Tests and Diagnostics 3.24 Wireless LAN Test Program (Calexico) This section describes how to perform the wireless LAN transm itting-receiving test with the test program. NOTE : Use another computer (with Calexico wireless LAN card) that can communicate by the wireless LAN as a reference machine to perfor[...]

  • Página 163

    3 Tests and Diagnostics 3.25 Wireless LAN Test Program (Atheros 11b/g or 11a/b/g) 3.25 Wireless LAN Test Program (Atheros 11b/g or 11a/b/g) This section describes how to perform the wireless LAN transm itting-receiving test with the test program. NOTE: Use another computer (with Atheros 11b/g or 11a/b/g wireless LAN card) that can communicate by th[...]

  • Página 164

    3.25 Wireless LAN Test Program (Atheros 11b/g or 11a/b/g) 3 Tests and Diagnostics Setting the responder machine NOTE: Release the write-protection of the floppy disk for the test. Insert a floppy disk containing the test program into the floppy disk drive of the responder machine and turn on the responder machine. The W ireless LAN test menu will a[...]

  • Página 165

    3 Tests and Diagnostics 3.25 Wireless LAN Test Program (Atheros 11b/g or 11a/b/g) When the tester machine has passed the test, "OK" m essage will appear in the tester machine. Press Enter to return to the main menu. When the tester machine has not passed the test, "NG" m essage will appear in the tester machine. Pressing Enter o[...]

  • Página 166

    3.26 Sound/LAN/Modem Test Program 3 Tests and Diagnostics 3.26 Sound/LAN/Modem Test Program This section describes how to perform the Sound/LAN/Modem test with the test program . Insert the Test program disk in the floppy disk drive and turn on the power. The following message will appear: ###########################################################[...]

  • Página 167

    3 Tests and Diagnostics 3.26 Sound/LAN/Modem Test Program Subtest 01 Microphoned recording & play [Recording & play test !] This subtest checks the function of the CODEC A/D D/A converter. Both the microphone and headphone terminals can be checked at the sam e time. Before executing this subtest, connect an external microphone to the comput[...]

  • Página 168

    3.26 Sound/LAN/Modem Test Program 3 Tests and Diagnostics Subtest 02 LAN This subtest checks the operation of mini-PCI I/F by the loopback in the chip. Select 3 to execute and press Enter . The following message will appear: [LAN transmit & receive test !] COMPLETED Repeat count = 00000 Error count = 00000 LOOPBACK TEST 100Mbps Auto-negotiation[...]

  • Página 169

    3 Tests and Diagnostics 3.26 Sound/LAN/Modem Test Program After a few seconds, the following message will appear: ...Press Key (Y = OK, N =NG) If you hear the modem sou n d from the speakers, press Y , otherwise, press N . NOTE : The menu displayed by your computer may be slightly different from the one shown above. After you press Y or N , the RJ1[...]

  • Página 170

    3.27 IEEE1394 test program 3 Tests and Diagnostics 3.27 IEEE1394 test program This section describes how to perform the IEEE1394 test with the test program. NOTE: Use another computer that can communicate by IEEE1394 (i. Link) cable as a reference machine to perform this test. Toshiba MS-DOS is required to run the DIAGNOSTICS TEST PROGRAM. To start[...]

  • Página 171

    3 Tests and Diagnostics 3.27 IEEE1394 test program 3-58 Satellite M30-35 Maintenance Manual (960-455)[...]

  • Página 172

    Chapter 4 Replacement Procedures[...]

  • Página 173

    4 Replacement Procedures 4-ii Satellite M30-35 Maintenance Manual (960-455)[...]

  • Página 174

    4 Replacement Procedures Chapter 4 Contents 4.1 General .................................................................................................................... ... 4-1 4.2 Battery Pack ............................................................................................................... 4-9 4.3 PC Card ........................[...]

  • Página 175

    4 Replacement Procedures 4.27 Sensor/Switch Board................................................................................................ 4-69 4.28 LCD Cable/Wireless LAN Antenna/Hinge ............................................................. 4-70 4.29 Fluorescent Lamp.....................................................................[...]

  • Página 176

    4 Replacement Procedures Figure 4-24 Removing the Touch pad holder .................................................................. 4-45 Figure 4-25 Removing the CD-key assembly ................................................................. 4-46 Figure 4-26 Removing the System board (1) .........................................................[...]

  • Página 177

    4 Replacement Procedures 4-vi Satellite M30-35 Maintenance Manual (960-455) Figure 4-56 Replacing TMD fluorescent lamp (WXGA) (6) .......................................... 4-83 Figure 4-57 Replacing TMD fluorescent lamp (WXGA) (7) .......................................... 4-84 Figure 4-58 Replacing TMD fluorescent lamp (WXGA) (8) ................[...]

  • Página 178

    4.1 General 4 Replacement Procedures 4 Replacement Procedures 4.1 General This section explains how to disassemble the computer and replace Field Replaceable Units (FRUs). It may not be necessary to remove all the FRUs in order to replace one. The chart below is a guide to which FRUs need to be removed in order to remove others. Always start by rem[...]

  • Página 179

    4 Replacement Procedures 4.1 General Safety Precautions Before you begin disassembly, read the following safety precautions and observe them carefully as you work. DANGER: 1) Always use the genuine battery that is authorized by Toshiba or compatible with the unit. Since other battery packs have different specifications, they may be incompatible wit[...]

  • Página 180

    4.1 General 4 Replacement Procedures Before You Begin Look over the procedures in this section before you begin disassembling the computer. Familiarize yourself with the disassembly and reassem bly steps. Begin each procedure by removing the AC adapter and the battery pack as instructed in this section: 1. Do not disassemble the computer unless it [...]

  • Página 181

    4 Replacement Procedures 4.1 General Disassembly Procedures The computer has two basic types of cable connectors: • Pressure Plate Connectors • Coaxial Cable Connectors • Normal Pin Connectors To disconnect a Pressure Plate connector, lift up the tabs on either side of the connector’s plastic pressure plate and slide the cable out of the co[...]

  • Página 182

    4.1 General 4 Replacement Procedures Tools and Equipment The use of Electrostatic Discharge (ESD) equipment is very important for your safety and the safety of those around you. Proper use of these devices will increase the success rate of your repairs and lower the cost for damaged or destroyed parts. The following equipment is necessary to disass[...]

  • Página 183

    4 Replacement Procedures 4.1 General Screw Tightening Torque When you fasten screws, be sure to follow the torque list below. CAUTION: Overtightening can damage components and screws; undertightening can result in electrical shorts or other damage if screws or components come loose. NOTE: Toshiba recommends that you use an electric screwdriver for [...]

  • Página 184

    4.1 General 4 Replacement Procedures Color of Screw Shaft To avoid mistakes on the screw length, screw shafts are colored as follows:  Even number length screw: brown  Odd number length screw: white  Special length screw: blue Screws whose lengths are indicated to one or more decimal places such as 2.5 m m or 2.8 mm. Marking of Screws on t[...]

  • Página 185

    4 Replacement Procedures 4.2 Battery Pack 4.2 Battery Pack Removing the Battery Pack To remove the battery pack, follow the steps below and refer to figure 4-1. CAUTION: When handling battery packs, be careful not to short circuit the terminals. Also do not drop, hit or apply impact; do not scratch, break, twist or bend the battery pack. 1. Turn of[...]

  • Página 186

    4.2 Battery Pack 4 Replacement Procedures Installing the Battery Pack To install the battery pack, follow the steps below and refer to figure 4-1. CAUTION: The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. For environmental reasons, collect the spent battery packs. Use only batterie[...]

  • Página 187

    4 Replacement Procedures 4.3 PC Card 4.3 PC Card Removing the PC Card To remove the PC card, follow the steps below and refer to figure 4-2. CAUTION: Before you remove a PC card, refer to the card's documentation and your operating system documentation for proper procedures and precautions. 1. Turn the computer face up. 2. Push the eject butto[...]

  • Página 188

    4.3 PC Card 4 Replacement Procedures Installing the PC Card To install the PC card, follow the steps below and refer to figure 4-2. 1. Make sure the eject button does not stick out. 2. Insert the PC card and press it until it is securely connected. Satellite M30-35 Maintenan ce Manual (960-455) 4-11[...]

  • Página 189

    4 Replacement Procedures 4.4 SD Card 4.4 SD Card Removing the SD Card To remove the SD card, follow the steps below and refer to figure 4-3. CAUTION: Before you remove the SD card, refer to the card's documentation and to your operating system documentation for proper procedures and precautions. 1. Turn the computer face up. 2. Push the SD car[...]

  • Página 190

    4.5 HDD 4 Replacement Procedures 4.5 HDD CAUTION : When handling the HDD, do not press the top surface as shown by the arrow. Hold it by the sides. HDD Removing the HDD To remove the HDD, follow the steps below and refer to figures 4-4 and 4-5. 1. Turn the computer upside down. 2. Remove the following screw securing the HDD cover. Remove the HDD co[...]

  • Página 191

    4 Replacement Procedures 4.5 HDD 3. Push the tab of the HDD pack to the direction of the arrow and remove the HDD pack. Be careful not to damage the connector. NOTE: The following steps describe how to disassemble the HDD pack; however, do not disassemble if the HDD is working properly. 4. Remove the following screws . • M3 × 4S FLAT HEAD screw [...]

  • Página 192

    4.5 HDD 4 Replacement Procedures Installing the HDD To install the HDD, follow the steps below and refer to figures 4-4 and 4-5. CAUTION: Do not hold the HDD by its top and bottom flat surfaces. It may damage the HDD. 1. Install the HDD to the aluminum laminate . 2. Place the HDD in the bracket. 3. Secure the HDD to the HDD bracket with the followi[...]

  • Página 193

    4 Replacement Procedures 4.6 Optical Drive 4.6 Optical Drive Removing the Optical Drive To remove the optical drive, follow the steps below and refer to figures 4-6 and 4-7. CAUTION: Do not apply excessive force to the top of an optical drive. 1. Remove the following screws securing the optical drive . • M2.5 × 4B FLAT HEAD screw × 2 2. Slide t[...]

  • Página 194

    4.6 Optical Drive 4 Replacement Procedures 3. Remove the following screws securing the plastic frame . • M2 × 3C S-FLAT HEAD screw × 4 • Stepping screw × 1 Opt ica l Dr iv e Pl astic frame M2 × 3C S-FL AT HE AD M2 × 3C S-FL AT HE AD St e pp ing scr ew Figure 4-7 Disassembling the optical drivel Satellite M30-35 Maintenan ce Manual (960-455[...]

  • Página 195

    4 Replacement Procedures 4.6 Optical Drive Installing the Optical drive To install the optical drive, follow the steps below and refer to figures 4-6 and 4-7. 1. Seat the plastic frame on the side of the optical drive, and secure it with the following s crews . • M2 × 3C S-FLAT HEAD screw × 4 • Stepping screw × 1 2. Slide the optical drive i[...]

  • Página 196

    4.7 Memory module/ Modem Daughter Card 4 Replacement Procedures 4.7 Memory module/ Modem Daughter Card CAUTION: The power of the computer must be turned off when you remove the memory module. Removing a memory module with the power on risks damaging the module or the computer itself. Do not touch the memory module terminals. Any dirt on the termina[...]

  • Página 197

    4 Replacement Procedures 4.7 Memory module/ Modem Daughter Card Installing the memory module To install the memory m odule, confirm that the computer is in boot m ode. Then follow the steps below and refer to figures 4-8. 1. Insert the memory module into the connector of the computer slantwise (terminal side first) and press it to connect firmly. C[...]

  • Página 198

    4.7 Memory module/ Modem Daughter Card 4 Replacement Procedures 4.7.2 Modem Daughter Card Removing the Modem Daughter Card To remove the modem daughter card, follow the steps below and refer to figure 4-9. 1. Remove the following screws securing the m odem daughter card. • M2 × 4B BIND screw × 2 2. Lift up the modem daughter card to disconnect [...]

  • Página 199

    4 Replacement Procedures 4.7 Memory module/ Modem Daughter Card Installing the Modem Daughter Card To install the modem daughter card, follow the steps below and refer to figures 4-9. 1. Connect the modem cable to CN1 on the modem daughter card. 2. Connect the modem daughter card to the connector PJ3000 on the system board. CAUTION: Be careful not [...]

  • Página 200

    4.8 Wireless LAN board 4 Replacement Procedures 4.8 Wireless LAN board CAUTION: The power must be turned off when you remove the wireless LAN board. Removing the wireless LAN board with the power on risks damaging the card or the computer itself. Never press hard or bend the wireless LAN board. Removing the wireless LAN board To remove the wireless[...]

  • Página 201

    4 Replacement Procedures 4.8 Wireless LAN board 4-24 Satellite M30-35 Ma intenance Manual (960-455) Installing the wireless LAN board To install the wireless LAN board, follow the steps below and refer to figure 4-10. 1. Insert the wireless LAN board terminals slantwise into the connector on the computer and press the wireless LAN board until it is[...]

  • Página 202

    4 Replacement Procedures 4.9 Keyboard 4 Replacement Procedures 4.9 Keyboard Removing the Keyboard To remove the keyboard, follow the steps below and refer to figures 4-11 to 4-12. 1. Turn the computer face up and open the display panel. 2. Insert your finger into the latches between the keyboard brace and the computer, and lift up the keyboard brac[...]

  • Página 203

    4.9 Keyboard 4 Replacement Procedures 4. Lift the upper side of the keyboard out and turn it’s face down on the palm rest. 5. Remove the following screw securing the keyboard support plate and remove the keyboard support plate. • M2.5 × 8B FLAT HEAD screw × 1 M2.5 × 8B FLA T HEAD PJ3200 Keyboa rd sup port plate Keyboard cable Figure 4-12 Rem[...]

  • Página 204

    4 Replacement Procedures 4.9 Keyboard Installing the Keyboard To install the keyboard, follow the steps below and refer to figures 4-11 to 4-12. 1. Place the keyboard face down on the palm rest. 2. Connect the keyboard cable to the connector PJ3200 on the system board. 3. Place the keyboard support plate and secure it with the following screw . •[...]

  • Página 205

    4.10 Switch cover ASSY/Switch membrane 4 Replacement Procedures 4.10 Switch cover ASSY/Switch membrane Removing the Switch cover ASSY/Sw itch membrane To remove the Switch cover ASSY/Switch mem brane, follow the steps below and refer to figure 4-13 and 4-14. 1. Remove the switch cover ASSY by lifting the left side up, while releasing the latches. S[...]

  • Página 206

    4 Replacement Procedures 4.10 Switch cover ASSY/Switch membrane 2. Pull up the insulator . 3. Disconnect the switch membrane cable from the connector PJ7001 on the system board. 4. Remove the following screws fixing the switch membrane . • M2.5 × 4B FLAT HEAD screw × 2 5. Remove the switch membrane by lifting up the left side of the switch memb[...]

  • Página 207

    4.10 Switch cover ASSY/Switch membrane 4 Replacement Procedures Installing the Switch cover ASSY/Sw itch membrane To install the Switch cover ASSY/Switch membrane, fo llow the steps below and refer to figure 4-13 and 4-14. 1. Place the switch membrane with the right side under the guides and secure it with the following screws . • M2.5 × 4B FLAT[...]

  • Página 208

    4 Replacement Procedures 4.11 Display Assembly 4.11 Display Assembly Removing the Display Assembly To remove the display assembly, follow the steps below and refer to figures 4-15 to 4-17. 1. Turn the computer face down, and remove the following screws . • M2.5 × 16B FLAT HEAD screw × 8 (“16” in the figure below) • M2.5 × 10B FLAT HEAD s[...]

  • Página 209

    4.11 Display Assembly 4 Replacement Procedures 2. Turn the computer face up and open the display panel. 3. Remove the following screws securing the display assem bly. • M2.5 × 6B FLAT HEAD screw × 3 • M2.5 × 8B FLAT HEAD screw × 1 4. Disconnect the LCD cable from the connector PJ5600 on the system board. 5. Disconnect the two wireless LAN c[...]

  • Página 210

    4 Replacement Procedures 4.11 Display Assembly 8. Remove the display assembly from the base assembly. Display asse mbly Figure 4-17 Removing the display assembly (3) NOTE: When removing the display assembly, be careful not to damage any cables. 4-34 Satellite M30-35 Ma intenance Manual (960-455)[...]

  • Página 211

    4.11 Display Assembly 4 Replacement Procedures Installing the Display Assembly To install the display assembly, follow the steps below and refer to figures 4-15 to 4-17. 1. Install the display assembly on the base assembly. NOTE : When installing the display assembly, be careful not to pinch or damage any cables. 2. Press along the edges of the dis[...]

  • Página 212

    4 Replacement Procedures 4.12 Touch Pad Button 4.12 Touch Pad Button Removing the Touch Pad Button To remove the touch pad button, follow the steps below and refer to figure 4-18. 1. Remove the following screws fixing the touch pad button. • M2.5 × 4 Tapping screw × 3 2. Remove the touch pad button . M2. 5 × 4 Ta pping T ouch pad b utton Figur[...]

  • Página 213

    4.13 Microphone 4 Replacement Procedures 4.13 Microphone Removing the Microphone To remove the Microphone, follow the steps below and refer to figures 4-19 and 20. 1. Remove the microphon e from the guide. Micr op ho n e Figure 4-19 Removing the microphone 2. Peel the insulator on the back and remove the microphone cable from the guide. 3. Remove t[...]

  • Página 214

    4 Replacement Procedures 4.13 Microphone Installing the Microphone To install the Microphone, follow the steps below and refer to figures 4-19 and 20. 1. Pass the microphone cable from the front to the back. 2. Set the microphone , putting the hole in the guide. 3. Pass the microphone cable through the slot with guides. 4-38 Satellite M30-35 Ma int[...]

  • Página 215

    4.14 Touch Pad 4 Replacement Procedures 4.14 Touch Pad Removing the Touch Pad To remove the touch pad, follow the steps below and refer to figures 4-21. 1. Disconnect the touch pad flexible cable from the connector PJ3201 on the system board. 2. Remove the following screws securing the touch pad. • M2.5 × 8B FLAT HEAD screw × 1 • M2.5 × 4B F[...]

  • Página 216

    4 Replacement Procedures 4.14 Touch Pad Installing the Touch Pad To install the touch pad, follow the steps below and refer to figures 4-21. 1. Connect the touch pad flexible cable to the connector on the touch pad. 2. Install the touch pad and secure it with the following screws . • M2.5 × 8B FLAT HEAD screw × 1 • M2.5 × 4B FLAT HEAD screw [...]

  • Página 217

    4.15 RTC Battery 4 Replacement Procedures 4.15 RTC Battery WARNING: When replacing the RTC battery, be sure to use genuine batteries or replacement batteries authorized by Toshiba. Installing the wrong battery could cause a battery explosion or other damage. If the RTC battery is found abnormal, it must not be installed. Replace it with a new batte[...]

  • Página 218

    4 Replacement Procedures 4.15 RTC Battery Removing the RTC Battery To remove the RTC battery, follow the steps below and refer to figure 4-22. 1. Peel off the insulator . 2. Disconnect the RTC battery cable from the connector PJ8490 on the system board. 3. Remove the RTC battery . In su la t or RTC batte ry RTC ba tte ry cable In su la t or Figure [...]

  • Página 219

    4.16 Sound Board/Touch Pad holder 4 Replacement Procedures 4.16 Sound Board/Touch Pad holder 4.16.1 Sound Board Removing the Sound Board To remove the sound board, follow the steps below and refer to figure 4-23. 1. Remove the following screw and the sound board . • M2.5 × 6B FLAT HEAD screw × 1 2. Disconnect the sound board I/F cable from the [...]

  • Página 220

    4 Replacement Procedures 4.16 Sound Board/Touch Pad holder Installing the Sound Board To install the sound board, follow the steps below and refer to figure 4-23. 1. Connect the sound board I/F cable to the connector on the sound board and secure it with the insulator . 2. Install the sound board from the side with jacks and secure it with the foll[...]

  • Página 221

    4.16 Sound Board/Touch Pad holder 4 Replacement Procedures 4.16.2 Touch Pad holder Removing the Touch Pad holder To remove the touch pad holder, follow the steps below and refer to figures 4-24. 1. Disconnect the sound board I/F cable from the connector PJ7002 on the system board. 2. Remove the touch pad holder from the system board. Sound b oar d [...]

  • Página 222

    4 Replacement Procedures 4.17 CD-Key assembly 4.17 CD-Key assembly Removing the CD-Key assembly To remove the CD-key assembly, follow the steps below and refer to figures 4-25. 1. Disconnect the CD-key flexible cable from the connector PJ7000 on the system board. 2. Remove the following screw and the CD-key assembly . • M2 × 4B BIND screw × 1 M[...]

  • Página 223

    4.18 System Board 4 Replacement Procedures 4.18 System Board Removing the System Board To remove the system board, follow the steps below and refer to figures 4-26 and 4-27. 1. Peel off the glass tape and disconnect the RGB cable from the connector PJ5621 on the system board. 2. Disconnect the speaker cables from the connectors PJ6003 (red) and PJ6[...]

  • Página 224

    4 Replacement Procedures 4.18 System Board 7. Remove the following screws securing the system board. • M2.5 × 6B FLAT HEAD screw × 1 8. Lift up the right side of the system board and remove it. Sy stem b o ard M2.5 × 6B FL AT HEAD Figure 4-27 Removing the system board (2) 4-48 Satellite M30-35 Ma intenance Manual (960-455)[...]

  • Página 225

    4.18 System Board 4 Replacement Procedures Satellite M30-35 Maintenan ce Manual (960-455) 4-49 Installing the System Board To install the system board, follow the steps below and refer to figures 4-26 and 27. 1. Install the system board from the left side. NOTE: When installing the system board, be careful not to pinch or damage the USB cable, RGB [...]

  • Página 226

    4 Replacement Procedures 4.19 CPU 4 Replacement Procedures 4.19 CPU Removing the CPU To remove the CPU, follow the steps below and refer to figures 4-28 and 4-29. CAUTION: 1) The CPU can become very hot during operation. Be sure to let it cool before starting repair work. 2) When you remove the CPU, wipe the grease off of the bottom of the fin and [...]

  • Página 227

    4.19 CPU 4 Replacement Procedures CAUTION: Silicon grease is applied between the fin and the CPU. When removing the fin, be careful not to damage the CPU under the fin. CPU holder FIN M2 × 4B BI ND Figure4-28 Removing the CPU holder and fin 4. Unlock the CPU by rotating the cam on the CPU socket 180 degrees counterclockwise with a flat-blade screw[...]

  • Página 228

    4 Replacement Procedures 4.19 CPU Installing the CPU To install the CPU, follow the steps below and refer to figures 4-28 to 4-30. 1. Make sure the cam is in the open position. 2. Seat the CPU in the CPU socket. Make sure the position is exact to avoid damaging pins on the CPU. 3. Fix the CPU by rotating the cam 180 degrees clockwise with a flat-bl[...]

  • Página 229

    4.20 Speaker 4 Replacement Procedures 4.20 Speaker Removing the Speaker To remove the speaker, follow the steps below and refer to figures 4-31 and 4-32. 1. Remove the following screws and peel the insulator . • M2.5 × 6B FLAT HEAD screw × 4 • M2.5 × 4B FLAT HEAD screw × 1 (upper left side) M2.5 × 4B FL AT HE AD M2. 5 × 6B FL AT HE AD M2.[...]

  • Página 230

    4 Replacement Procedures 4.20 Speaker 2. Remove the following screw and cable holder . • M2.5 × 4B FLAT HEAD screw × 1 M2.5 × 4B FLA T HEAD Cabl e holder Figure 4-32 Removing the cable holder 3. Remove both the speakers . Installing the Speaker To install the speaker, follow the steps below and refer to figures 4-31 to 4-32. 1. Set both the sp[...]

  • Página 231

    4.21 Fan 4 Replacement Procedures 4.21 Fan Removing the Fan To remove the fan, follow the steps below and refer to figure 4-33. 1. Remove the following screws securing the fan. • M2.5 × 6B FLAT HEAD screw × 1 (lower right side) 2. Remove the fan . M2. 5 × 6B F L AT HE AD Fan Figure4-33 Removing the fan Installing the Fan To install the fan, fo[...]

  • Página 232

    4 Replacement Procedures 4.22 USB Board/DC-IN jack/Network jack 4.22 USB Board/DC-IN jack/Network jack Removing the USB Board/DC-IN jack/Network jack To remove the USB board/DC-IN jack/network jack, follow the steps below and refer to figure 4-34. 1. Remove the following screw securing the USB board. • M2.5 × 4B FLAT HEAD screw × 1 2. Disconnec[...]

  • Página 233

    4.22 USB Board/DC-IN jack/Network jack 4 Replacement Procedures Installing the USB Board/DC-IN jack/Network jack To install the USB board/DC-IN jack/network jack, follow the steps below and refer to the figure 4-34. 1. Connect the DC-IN jack cable to the connector CN1 on the power board and Install the DC-IN jack . 2. Install the network jack to th[...]

  • Página 234

    4 Replacement Procedures 4.23 RGB board/Power board 4.23 RGB board/Power board Removing the RGB board/Power board To remove the RGB board/Power board, follow the steps below and refer to figures 4-35 to 4-37. 1. Remove the following screws and battery plate . • M2.5 × 6 Tapping screw × 3 M2.5 × 6 Ta pping Batt ery pl at e Figure 4-35 Removing [...]

  • Página 235

    4.23 RGB board/Power board 4 Replacement Procedures 4. Remove the following screws and power board . • M2.5 × 6 Tapping screw × 2 M2. 5 × 6 Ta ppin g B atte ry c ab le Wir eless LA N ca ble ( wh ite) Wir eless LA N ca ble ( bla ck ) Figure 4-37 Removing the power board 5. Disconnect the wireless LAN cables from the connectors CN6 (white) and C[...]

  • Página 236

    4 Replacement Procedures 4.23 RGB board/Power board Installing the RGB board/Power board To install the RGB board/Power board, follow the steps below and refer to figures 4-35 to 4- 37. 1. Connect the battery cable to the connector CN4 on the power board. 2. Connect the wireless LAN cables to the connectors CN6 (white) and CN8 (black) on the power [...]

  • Página 237

    4.24 Display Mask 4 Replacement Procedures 4.24 Display Mask Removing the Display Mask To remove the display mask, follow the steps below and refer to figures 4-38. 1. Remove the two mask seals at the lower part of the display mask. 2. Remove the four rubber masks at the top of the display mask. 3. Remove the following screws securing the display m[...]

  • Página 238

    4 Replacement Procedures 4.24 Display Mask Installing the Display Mask To install the display mask, follow the steps below and refer to figures 4-38. 1. Place the display mask on the LCD module. 2. Engage the latches of the display mask. 3. Secure the display mask with the following screws . • M2.5 × 6B FLAT HEAD screw × 2 • M2 × 4B S-FLAT H[...]

  • Página 239

    4.25 FL Inverter 4 Replacement Procedures 4.25 FL Inverter Removing the FL Inverter To remove the FL inverter, follow the steps below and refer to figure 4-39. 1. Remove the following screw securing the FL inverter. • M2 × 4B S-FLAT HEAD screw × 1 2. Peel the insulator on the FL inverter. 3. Disconnect the FL cable under the insulator from the [...]

  • Página 240

    4 Replacement Procedures 4.25 FL Inverter Installing the FL Inverter To install the FL inverter, follow the steps below and refer to figure 4-39. 1. Connect the FL cable and the HV cable to the FL inverter. 2. Seat the FL inverter and stick the insulator on the FL inverter of the FL cable side. 3. Secure the FL inverter with the following screw . ?[...]

  • Página 241

    4.26 LCD Module 4 Replacement Procedures 4.26 LCD Module NOTE: 1) Be careful not to apply pressure to the ICs along the edge of LCD module. The ICs are easily damaged. 2) For environmental reasons, do not throw away a malfunctioning LCD module (or FL). Please follow local ordinances or regulations for its disposal. Removing the LCD Module To remove[...]

  • Página 242

    4 Replacement Procedures 4.26 LCD Module 5. Disconnect the LCD cable from the connector on the back of the LCD and remove the LCD module . CAUTION : When removing the LCD cable, be careful not to damage the connector. M2 × 4B S-FLA T HEAD Mask seal Mask seal Mask seal LCD cable Copper tap e M2 × 4B S-FLA T HEAD Figure 4-40 Removing the LCD module[...]

  • Página 243

    4.26 LCD Module 4 Replacement Procedures 6. Remove the following screws securing the two metal braces to the LCD m odule. • M2 × 3C S-FLAT HEAD screw × 4 Me t al br ace Me t al br ace M2 × 3C S -FL AT HE AD Figure 4-41 Removing the LCD module (2) Satellite M30-35 Maintenan ce Manual (960-455) 4-67[...]

  • Página 244

    4 Replacement Procedures 4.26 LCD Module Installing the LCD Module To install the LCD module, follow the steps below and refer to figures 4-40 and 4-41. 1. Secure the two metal braces to the LCD module with the following screws . • M2 × 3C S-FLAT HEAD screw × 4 2. Set the LCD module on the display cover. 3. Connect the LCD cable to the connecto[...]

  • Página 245

    4.27 Sensor/Switch Board 4 Replacement Procedures 4.27 Sensor/Switch Board Removing the Sensor/Switch Board To remove the sensor/switch board, make sure the com puter is in boot mode and powered off, follow the steps below and refer to figure 4-42. 1. Remove the following screws securing the sensor/switch board. • M2 × 4B S-FLAT HEAD screw × 1 [...]

  • Página 246

    4 Replacement Procedures 4.28 LCD cable/Wireless LAN Antenna/Hinge 4.28 LCD cable/Wireless LAN Antenna/Hinge Removing the LCD cable/Wireless LAN Antenna To remove the LCD cable/wireless LAN antenna, follow the steps below and refer to figures 4-43 to 4-49. 1. Remove the following screw and LCD cable holder on the back. • M2.5 × 5B FLAT HEAD scre[...]

  • Página 247

    4.28 LCD cable/Wireless LAN Antenna/Hinge 4 Replacement Procedures 3. Peel off the four acetate tapes fixing the wireless LAN antenna cable. 4. Peel off the three copper sheets and the gasket fixing the wireless LAN antenna. 5. Peel off both the wireless LAN antennas and pull out the cables through the hole under the hinge cap. A cetate t ape Coppe[...]

  • Página 248

    4 Replacement Procedures 4.28 LCD cable/Wireless LAN Antenna/Hinge 6. Remove the hinge caps . 7. Remove the following screws fixing the hinges on the display cover. • M2.5 × 4B FLAT HEAD screw × 2 M2. 5 × 4B FL AT H E AD Hin ge ca p Figure 4-46 Removing the hinge cap 8. Remove the following screws and hinge (on the LCD cable side). • M2 × 4[...]

  • Página 249

    4.28 LCD cable/Wireless LAN Antenna/Hinge 4 Replacement Procedures 9. Pull out the LCD cable . 10. Remove the following screws and circle plate . • M2 × 4B S-FLAT HEAD screw × 2 M2 × 4B S-FLA T HEAD Circle plate Figure 4-48 Removing the circle plate 11. Remove the following screws and hinge (on the other side). • M2 × 4B S-FLAT HEAD screw ?[...]

  • Página 250

    4 Replacement Procedures 4.28 LCD cable/Wireless LAN Antenna/Hinge Installing the LCD cable/Wireless LAN Antenna To install the wireless LAN antenna/Bluetooth antenna/display cover/speaker, follow the steps below and refer to figures 4-43 to 4-50. 1. Pass the LCD cable through the slot and guide. 2. Set the hinge (on the opposite side of the LCD ca[...]

  • Página 251

    4.28 LCD cable/Wireless LAN Antenna/Hinge 4 Replacement Procedures Satellite M30-35 Maintenan ce Manual (960-455) 4-75 10. Secure the wireless LAN antenna with the three copper sheets and the gasket . Standard for sticking position of copper sheets (right , left) The copper sheet shall not be over the edge of the wall of LCD cover . 5 ± 4 mm Coppe[...]

  • Página 252

    4 Replacement Procedure 4.29 Fluorescent Lamp 4 4.29 Fluorescent Lamp This system uses LCD modules from the following suppliers. The procedure for replacing the fluorescent lamp is different for each LCD module. Refer to the appropriate procedure. Type Part No. Supplier Section Page G33C0001H110 TMD 4.29.1 4-76 G33C0001F110 LG.Philips 4.29.2 4-88 1[...]

  • Página 253

    4.29 Fluorescent Lamp 4 Replacement Procedure 4.29.1 Replacing the 15.4-inch WXGA TMD Fluorescent Lamp CAUTION : When replacing the fluorescent lamp, wear finger covers or gloves to avoid contaminating or damaging the LCD panel. Be careful not to let dust or other foreign substance into the module. Disassembling the 15.4-inch WXGA TMD Fluorescent L[...]

  • Página 254

    4 Replacement Procedure 4.29 Fluorescent Lamp NOTE: 1) Be careful not to give any damage to the TAB. 2) The X-PCB insulation sheet should be left attached to the bezel, as it will be recycled. 3) The Y-PCB insulation sheet shall not be disposed after removed, as it will be recycled. Fixing tape f or FL c able (2) Bez el tape (4) Y-PCB insulatio n s[...]

  • Página 255

    4.29 Fluorescent Lamp 4 Replacement Procedure 2. Removing screws 1) Spread out the insulation sheet without detaching from the side of bezel. 2) Remove the screws (left side, right side) in order as shown in the figure below. NOTE: Use a Philips screwdriver with type 0 bit to remove the screws. Produ ct Lab el Destruction Lab el Cautio n Label Back[...]

  • Página 256

    4 Replacement Procedure 4.29 Fluorescent Lamp 3. Removing bezel 1) Turn the LCD module face up with the insulation sheets on it. 2) Release the latches of the bezel and frame. (five points on upper side, two points lower side) 3) Remove the double-sided adhesive tape on the bottom of the side of bezel, and remove the bezel. NOTE: 1) Be careful not [...]

  • Página 257

    4.29 Fluorescent Lamp 4 Replacement Procedure 4. Spreading out PCB 1) Spread out the X-PCB and Y-PCB horizontally in order. NOTE: Be careful not to damage the TAB. (1) Spread out the X- PCB from the back. (2) Spread out the Y- PCB from the back. Figure 4-54 Replacing TMD fluorescent lamp (WXGA) (4) Satellite M30-35 Maintenan ce Manual (960-455) 4-8[...]

  • Página 258

    4 Replacement Procedure 4.29 Fluorescent Lamp 5. Removing PCB-ASSY cell 1) Remove the PCB-ASSY cell from the backlight unit. 2) Remove the double-sided adhesive tape from the back of the cell. NOTE: 1) Remove the tape slowly not to break the cell. The cell and frame are glued by double-sided adhesive tape. 2) Be careful not to remove the light shie[...]

  • Página 259

    4.29 Fluorescent Lamp 4 Replacement Procedure Assembling the 15.4-inch WXGA TMD Fluorescent Lamp To assemble the 15.4-inch WXGA TMD fluorescent lam p, follow the steps below and refer to figures 4-56 to 4-61. 1. Checking backlight 1) Check the following items shown in the figure below. Make sure the sheet does not come off the frame. Fixing tape fo[...]

  • Página 260

    4 Replacement Procedure 4.29 Fluorescent Lamp 2. Assembling PCB-ASSY cell 1) Remove the release paper of the double-sided tape at the upper of the backlight unit. 2) Light up the backlight. 3) Make sure there is no dust, alien substance or scratch on the backlight. Then make sure there is nothing wrong with the back of cell, install the PCB-ASSY ce[...]

  • Página 261

    4.29 Fluorescent Lamp 4 Replacement Procedure 3. Folding and temporary fixing of TAB/PCB 1) Fold the X-TAB (X-PCB) and Y-TAB (Y-PCB) to the back of backlight unit. 2) Hook the X-PCB on the three latches on the back of frame. NOTE: Be careful not to damage the TAB. (1) Fo ld th e X-PCB t o the ba ck. (2) Fold the Y-P CB to the back. Insert the FP C [...]

  • Página 262

    4 Replacement Procedure 4.29 Fluorescent Lamp 4. Setting bezel 1) Hook the bezel on the five latches of the frame from the upper side. NOTE: 1) Make sure the GND-CU on the left side and lamp reflector shall be inside the bezel. 2) Be careful not to damage the TAB. 3) Make sure the five latches of the upper side of bezel are hooked on. The cable sha[...]

  • Página 263

    4.29 Fluorescent Lamp 4 Replacement Procedure 5. Fixing PCBs and bezel with screws 1) Tighten the left side with the screws in order shown in the figure below. 2) Tighten the right side with the screws in order shown in the figure below. NOTE: 1) Tighten the screws in order. Make sure there is no floating of screw. 2) The screw tightening torque sh[...]

  • Página 264

    4 Replacement Procedure 4.29 Fluorescent Lamp 6. Sticking tapes and insulation sheets 1) Stick the Y-PCB insulation sheet and X-PCB insulation sheet in order. 2) Stick the two bezel tapes on the lower side (lamp side). 3) Stick the fixing tape for FL cable. NOTE: Be careful not to damage to the TAB or the pulling-out part of lamp cable when stickin[...]

  • Página 265

    4.29 Fluorescent Lamp 4 Replacement Procedure 4.29.2 Replacing the 15.4-inch WXGA LG.Philips Fluorescent Lamp Disassembly of outside tape / Cover shield To disassemble the 15.4-inch WXGA LG.Philips fluorescent lam p, follow the steps below and refer to figures 4-62 to 4-65. 1. Disassembly of Tape adhesive used for B/L Wire fixing CAUTION : Pressure[...]

  • Página 266

    4 Replacement Procedure 4.29 Fluorescent Lamp Disassembly of Top case 1. Disassembly of Top Case CAUTION : Pressure or stress should not be given on Top Case and Gate COF. Figure 4-63 Replacing LG.Philips fluorescent lamp (WXGA) (2) 4-90 Satellite M30-35 Main tenance Manual (960-455)[...]

  • Página 267

    4.29 Fluorescent Lamp 4 Replacement Procedure Disassembly of Source PCB and Gate PCB 1. Disassembly of Source PCB CAUTION : Pressure or stress should not be given on PCB and TCP during removing double tape. 2. Disassembly of Gate PCB CAUTION : Pressure or stress should not be given on PCB and TCP during removing double tape. Figure 4-64 Replacing L[...]

  • Página 268

    4 Replacement Procedure 4.29 Fluorescent Lamp Disassembly of Board Ass’y, Tape Adhesi ve, Light guide,Cover Ass’y bottom (L) 1. Disassembly of Board Ass’y CAUTION : This process should be made in Clean room with no scratch nor particle on Polarizer and B/L Ass’y. 2. Disassembly of Tape Adhesive used for Sheets fixing (5Point). 3. Disassembl[...]

  • Página 269

    4.29 Fluorescent Lamp 4 Replacement Procedure Assembly of Cover bottom, Sheets, Light guide, Tape Adhesive, Double Tape and Board Ass’y. To assemble the 15.4-inch WXGA LG.Philips fluorescent lam p, follow the steps below and refer to figures 4-66 to 4-69. 1. Detach a protect film from Double Tape at the Lamp Ass’y. 2. Attach the Lamp Ass’y to[...]

  • Página 270

    4 Replacement Procedure 4.29 Fluorescent Lamp Assembly of Source PCB 1. Assembly of Source PCB CAUTION : Stress should not be given on TCP during assembling S/M hook. Figure 4-67 Replacing LG.Philips fluorescent lamp (WXGA) (6) 4-94 Satellite M30-35 Main tenance Manual (960-455)[...]

  • Página 271

    4.29 Fluorescent Lamp 4 Replacement Procedure Assembly of Cover Ass’y, Screw, Top Case 1. Assembly of Top Case CAUTION : Pressure should not be given on Gate COF. Figure 4-68 Replacing LG.Philips fluorescent lamp (WXGA) (7) Satellite M30-35 Maintenan ce Manual (960-455) 4-95[...]

  • Página 272

    4 Replacement Procedure 4.29 Fluorescent Lamp Assembly of outside Tape and Cover shield 1. Assembly of Tape shield and Tape Adhesive used for Top case fixing NOTE : Pressure or stress should not be given on Top case during this process. 2. Assembly of Cover shield (S) NOTE : Pressure or stress should not be given on control PCB. Usage of gloves wit[...]

  • Página 273

    4.29 Fluorescent Lamp 4 Replacement Procedure 4.29.3 Replacing the 15.4-inch WXGA Samsung Fluorescent Lamp Disassembling the 15.4-inch WXGA Samsung Fluorescent Lamp To disassemble the 15.4-inch WXGA Sam sung fluorescent lamp, follow the steps below and refer to figures4-70 to 4-74. 1. Remove the PCB cover and COF cover. 2. Remove the lamp wire tape[...]

  • Página 274

    4 Replacement Procedure 4.29 Fluorescent Lamp 3. Remove the two screws from the PCB. Scr ew Scr ew PCB Figure 4-71 Replacing Samsung fluorescent lamp (WXGA) (2) 4. Remove the four screws from the top chassis. Screw Screw Screw Screw Figure 4-72 Replacing Samsung fluorescent lamp (WXGA) (3) 4-98 Satellite M30-35 Main tenance Manual (960-455)[...]

  • Página 275

    4.29 Fluorescent Lamp 4 Replacement Procedure 5. Remove the four bottom hooks and four side hooks (left and right) in the order. Then remove the top chassis from the m old frame. ( 2) Side hook (1 ) B o tto m h o o k Figure 4-73 Replacing Samsung fluorescent lamp (WXGA) (4) 6. Remove the panel assembly from the BLU. NOTE: Be careful not to damage t[...]

  • Página 276

    4 Replacement Procedure 4.29 Fluorescent Lamp 4-100 Satellite M30-35 Main tenance Manual (960-455) 7. The assembly procedure of the 15.4-inch WXGA Samsung fluorescent lamp is the reverse of the above disassembly procedure.[...]

  • Página 277

    Appendices[...]

  • Página 278

    Appendices App-ii[...]

  • Página 279

    Appendices Appendix Contents Appendix A Handling the LCD Module .......................................................................... A-1 Appendix B Board Layout .................................................................................................B-1 B.1 System Board (FMSSY* 32M) Front View .........................................[...]

  • Página 280

    Appendices C.23 PJ8490 RTC Battery Connector (3-pin) ..............................................................C-17 C.24 PJ8770 FAN connector (3-pin) ...........................................................................C-17 C.25 PJ2000 Debugging port (4-pin) ...........................................................................C-18 C[...]

  • Página 281

    Appendices Figures Figure B-1 System board (FMSSY* 32M) layout (front) ........................................................1 Figure B-2 System board (FMSSY* 32M) layout (back).........................................................3 Figure B-3 System board (FMSMP* 64M) layout (front) ........................................................5 Fi[...]

  • Página 282

    Appendices Tables Table B-1 System board (FMSSY* 32M) ICs and connectors (front) .....................................2 Table B-2 System board (FMSSY* 32M) ICs and connectors (back) .....................................4 Table B-3 System board (FMSMP* 64M) ICs and connectors (front) ....................................6 Table B-4 System board (FMSM[...]

  • Página 283

    Appendices Table C-24 FAN connector (3-pin) ....................................................................................C-17 Table C-25 Debugging port (4-pin) ....................................................................................C-18 Table C-26 USB connector PCB I/F connector (4-pin) ...........................................[...]

  • Página 284

    Appendices App-viii[...]

  • Página 285

    Appendix A Handling the LCD Module Appendices Appendix A P Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged during assem bly or disassembly. Observe the following precautions when handling the LCD module: 1. When installing the LCD module in the LCD cover, be sure to seat it so that it [...]

  • Página 286

    Appendices Appendix A Handling the LCD Module 3. If the panel’s surface gets dirty, wipe it with cotton or a soft cloth. If it is still dirty, try breathing on the surface to create a light condensate and wipe it again. If the surface is very dirty, we recommend a CRT cleaning agent. Apply the agent to a cloth and then wipe the panel’s surface.[...]

  • Página 287

    Appendix A Handling the LCD Module Appendices 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module. Satellite[...]

  • Página 288

    Appendices Appendix A Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. A-4 Satellite M30-35 Main tenance Manual (960-455)[...]

  • Página 289

    Appendix A Handling the LCD Module Appendices 9. Do not disassemble the LCD module. Disassembly can cause m alfunctions. 10. If you transport the module, do not use packing material that contains epoxy resin (amine) or silicon glue (alcohol or oxime). These m aterials can release gas that can damage the panel’s polarization. Satellite M30-35 Main[...]

  • Página 290

    Appendices Appendix A Handling the LCD Module A-6 Satellite M30-35 Main tenance Manual (960-455)[...]

  • Página 291

    Appendix B Board Layout Appendices Appendix B Board Layout B.1 System Board (FMSSY* 32M) Front View (A) (B) (C) (D) (E) (F) (G) (H) (I) (J) (K) (L) (M) (N) (O) (P) (Q) (R) (S) (T) (U) (V) (W) Figure B-1 System board (FMSSY* 32M) layout (front) Satellite M30-35 Maintenan ce Manual (960-455) B-1[...]

  • Página 292

    Appendices Appendix B Board Layout Table B-1 System board (FMSSY* 32M) ICs and connectors (front) Mark Number Name (A) PJ2100 PC card I/F connector (B) PJ7000 CD key I/F connector (C) PJ6001 Internal microphone I/F connector (D) PJ8490 RTC battery connector (E) PJ7002 Sound connector PCB I/F connector (F) PJ1800 HDD I/F connector (G) PJ3200 Keyboar[...]

  • Página 293

    Appendix B Board Layout Appendices B.2 System Board (FMSSY* 32M) Back View (A) (B) (C) (D) (E) (F) (G) (H) (I) (J) Figure B-2 System board (FMSSY* 32M) layout (back) Satellite M30-35 Maintenan ce Manual (960-455) B-3[...]

  • Página 294

    Appendices Appendix B Board Layout Table B-2 System board (FMSSY* 32M) ICs and connectors (back) Mark Number Name (A) PJ3400 Parallel I/F connector (B) PJ3000 MDC I/F connector (C) PJ1820 CD-ROM I/F connector (D) PJ2200 Mini PCI I/F connector (E) PJ4200 1394 I/F connector (F) IC5000 NV34 (G) IC1200 MCH-M (H) IS1100 CPU (I) IC6008 AN12940 (J) IS2101[...]

  • Página 295

    Appendix B Board Layout Appendices B.3 System Board (FMSMP* 64M) Front View (A) (B) (C) (D) (E) (F) (G) (H) (I) (J) (K) (L) (M) (N) (O) (P) (Q) (R) (S) (T) (U) (V) (W) (X) Figure B-3 System board (FMSMP* 64M) layout (front) Satellite M30-35 Maintenan ce Manual (960-455) B-5[...]

  • Página 296

    Appendices Appendix B Board Layout Table B-3 System board (FMSMP* 64M) ICs and connectors (front) Mark Number Name (A) PJ2100 PC card I/F connector (B) PJ7000 CD key I/F connector (C) PJ6001 Internal microphone I/F connector (D) PJ8490 RTC battery connector (E) PJ7002 Sound connector PCB I/F connector (F) PJ1800 HDD I/F connector (G) PJ3200 Keyboar[...]

  • Página 297

    Appendix B Board Layout Appendices B.4 System Board (FMSMP* 64M) Back View (A) (B) (C) (D) (E) (F) (G) (H) (I) (J) Figure B-4 System board (FMSMP* 64M) layout (back) Satellite M30-35 Maintenan ce Manual (960-455) B-7[...]

  • Página 298

    Appendices Appendix B Board Layout B-8 Satellite M30-35 Main tenance Manual (960-455) Table B-4 System board (FMSMP* 64M) ICs and connectors (back) Mark Number Name (A) PJ3400 Parallel I/F connector (B) PJ3000 MDC I/F connector (C) PJ1820 CD-ROM I/F connector (D) PJ2200 Mini PCI I/F connector (E) PJ4200 1394 I/F connector (F) IC5000 NV64 (G) IC1200[...]

  • Página 299

    Appendix C Pin Assignment Appendices Satellite M30-35 Main tenance Manual (960-455) C-1 C Appendix C Pin Assignment System Board (common to FMSSY* 32M, FMSMP* 64M) C.1 IS1400/1401 Memo ry connector (200-pin) Table C-1 Memory connector (200-pin)(1/4) Pin No. Signal name I/O Pin No. Signal name I/O 1 VREF - 2 VREF - 3 GND - 4 GND - 5 SDQ00R-B2P I/O 6[...]

  • Página 300

    Appendices Appendix C Pin Assignment C-2 Satellite M30-35 Main tenance Manual (960-455) Table C-1 Memory connector (200-pin)(2/4) Pin No. Signal name I/O Pin No. Signal name I/O 55 SDQ25R-B2P I/O 56 SDQ29R-B2P I/O 57 2R5-B2V - 58 2R5-B2V - 59 SDQ24R-B2P I/O 60 SDQ28R-B2P I/O 61 SDQS3R-B2P I/O 62 GND - 63 GND - 64 GND - 65 SDQ26R-B2P I/O 66 SDQ30R-B[...]

  • Página 301

    Appendix C Pin Assignment Appendices Satellite M30-35 Main tenance Manual (960-455) C-3 Table C-1 Memory connector (200-pin)(3/4) Pin No. Signal name I/O Pin No. Signal name I/O 125 GND - 126 GND - 127 SDQ37R-B2P I/O 128 SDQ33R-B2P I/O 129 SDQ36R-B2P I/O 130 SDQ32R-B2P I/O 131 2R5-B2V - 132 2R5-B2V - 133 SDQS4R-B2P I/O 134 GND - 135 SDQ34R-B2P I/O [...]

  • Página 302

    Appendices Appendix C Pin Assignment C-4 Satellite M30-35 Main tenance Manual (960-455) Table C-1 Memory connector (200-pin)(4/4) Pin No. Signal name I/O Pin No. Signal name I/O 195 SMBCLK-P3P I/O 196 GND - 197 P3V - 198 GND - 199 N.C - 200 N.C - C.2 PJ1800 HDD I/F connect or (44-pin) Table C-2 HDD I/F connector (44-pin) Pin No. Signal name I/O Pin[...]

  • Página 303

    Appendix C Pin Assignment Appendices Satellite M30-35 Main tenance Manual (960-455) C-5 C.3 PJ1820 CD-ROM I/F connector (50-pin) Table C-3 CD-ROM I/F connector (50-pin) Pin No. Signal name I/O Pin No. Signal name I/O 1 CDAUDL-EXP I 2 CDAUDR-EXP I 3 CD-GND I 4 N.C - 5 IDRSTB-E5N O 6 SDD08-E5P I/O 7 SDD07-E5P I/O 8 SDD09-E5P I/O 9 SDD06-E5P I/O 10 SD[...]

  • Página 304

    Appendices Appendix C Pin Assignment C-6 Satellite M30-35 Main tenance Manual (960-455) C.4 PJ2100 PC card I/F connector (68-pin) Table C-4 PC card I/F connector (68-pin) (1/2) Pin No. Signal name I/O Pin No. Signal name I/O 1 GND - 2 ACAD00-BYP I/O 3 ACAD01-BYP I/O 4 ACAD03-BYP I/O 5 ACAD05-BYP I/O 6 ACAD07-BYP I/O 7 ACCBEO-BYP I/O 8 ACAD09-BYP I/[...]

  • Página 305

    Appendix C Pin Assignment Appendices Satellite M30-35 Main tenance Manual (960-455) C-7 Table C- PC card I/F connector (68-pin) (2/2) Pin No. Signal name I/O Pin No. Signal name I/O 59 ACSERR-BYN I/O 60 ACREQ-BYN I/O 61 ACCBE3-BYN I/O 62 ACAUDI-BYP I 63 ACSTSC-BYP I 64 ACAD28-BYP I/O 65 ACAD30-BYP I/O 66 ACAD31-BYP I/O 67 ACCD2-B3N I 68 GND - C.5 I[...]

  • Página 306

    Appendices Appendix C Pin Assignment C-8 Satellite M30-35 Main tenance Manual (960-455) C.6 PJ2200 Mini PCI I/F connector (124-pin) Table C-6 Mini PCI I/F connector (124-pin) (1/2) Pin No. Signal name I/O Pin No. Signal name I/O 1 N.C. - 2 N.C. - 3 N.C. - 4 N.C. - 5 N.C. - 6 N.C. - 7 N.C. - 8 N.C. - 9 N.C. - 10 N.C. - 11 N.C. - 12 N.C. - 13 WLON-S3[...]

  • Página 307

    Appendix C Pin Assignment Appendices Satellite M30-35 Main tenance Manual (960-455) C-9 Table C-6 Mini PCI I/F connector (124-pin) (2/2) Pin No. Signal name I/O Pin No. Signal name I/O 63 P3V - 64 FRAME-P3N O 65 CLKRUN-P3N I 66 TRDY-P3N O 67 SERR-P3N I 68 ST OP-P3N 0 69 GND - 70 P3V - 71 PERR-P3N I 72 DEVSEL-P3N 0 73 CBE1-P3N I 74 GND - 75 AD14-P3P[...]

  • Página 308

    Appendices Appendix C Pin Assignment C-10 Satellite M30-35 Maintenance Manu al (960-455) C.7 PJ3000 MDC I/F connector (30-pin) Table C-7 MDC I/F connector (30-pin) Pin No. Signal name I/O Pin No. Signal name I/O 1 N.C - 2 GND - 3 GND - 4 N.C - 5 N.C - 6 N.C - 7 N.C - 8 GND - 9 N.C - 10 N.C - 11 N.C - 12 N.C - 13 N.C - 14 N.C - 15 GND - 16 MDC-B3V I[...]

  • Página 309

    Appendix C Pin Assignment Appendices Satellite M30-35 Main tenance Manual (960-455) C-11 C.8 PJ3200 Keyboard I/F connector (34-pin) Table C-8 Keyboard I/F connector (34-pin) Pin No. Signal name I/O Pin No. Signal name I/O 1 NUMLED-P5N I 2 ARWLED-P5N I 3 CAPLED-P5N I 4 P5V - 5 KBSC00-S3N O 6 KBSC01-S3N O 7 KBSC02-S3N O 8 KBSC03-S3N O 9 KBSC04-S3N O [...]

  • Página 310

    Appendices Appendix C Pin Assignment C-12 Satellite M30-35 Maintenance Manu al (960-455) C.10 PJ3400 Parallel I/F Connector (25-pin) Table C-10 Parallel I/F connector (25-pin) Pin No. Signal name I/O Pin No. Signal name I/O 1 STROB-P5N I 2 PDB00-P5P I/O 3 PDB01-P5P I/O 4 PDB02-P5P I/O 5 PDB03-P5P I/O 6 PDB04-P5P I/O 7 PDB05-P5P I/O 8 PDB06-P5P I/O [...]

  • Página 311

    Appendix C Pin Assignment Appendices Satellite M30-35 Main tenance Manual (960-455) C-13 C.12 PJ4200 1394 I/F connector (4-pin) Table C-12 1394 I/F connector (4-pin) Pin No. Signal name I/O Pin No. Signal name I/O 1 TPB0-P3N I/O 2 TPB0-P3P I/O 3 TPA0-P3N I/O 4 TPA0-P3P I/O C.13 PJ5600 LCD co nnector (41-pin) Table C-13 LCD connector (41-pin) Pin No[...]

  • Página 312

    Appendices Appendix C Pin Assignment C-14 Satellite M30-35 Maintenance Manu al (960-455) C.14 PJ5621 CRT I/F connector (20-pin) Table C-14 CRT I/F connector (20-pin) Pin No. Signal name I/O P i n N o . Signal name I/O 1 GND - 2 TVLOUT-PXP O 3 GND - 4 TVCOUT-PXP O 5 GND - 6 N.C - 7 DDC-P5V - 8 NVDSCL-P5P I/O 9 (AVSYNC-P3P) I 10 (AHSYNC-P3P) O 11 NVD[...]

  • Página 313

    Appendix C Pin Assignment Appendices Satellite M30-35 Main tenance Manual (960-455) C-15 C.17 PJ6003 Speaker Connector (right) (3-pin) Table C-17 Speaker connector (right) pin assignment (3-pin) Pin No. Signal name I/O P i n N o . Signal name I/O 1 SPKOTR-EXN O 2 N.C - 3 SPKOTR-EXP O C.18 PJ7000 CD key I/F connector (18-pin) Table C-18 CD key I/F c[...]

  • Página 314

    Appendices Appendix C Pin Assignment C-16 Satellite M30-35 Maintenance Manu al (960-455) C.19 PJ7001 Power switch I/F connector (15-pin) Table C-19 Power switch I/F connector (15-pin) Pin No. Signal name I/O P i n N o . Signal name I/O 1 PWLEB3-M5N O 2 M5V - 3 BTLED2-P5N O 4 P5V - 5 ODLED2-M5N O 6 M5V - 7 GND - 8 TVOBTN-S3N I 9 ITCBTN-S3N I 10 INET[...]

  • Página 315

    Appendix C Pin Assignment Appendices Satellite M30-35 Main tenance Manual (960-455) C-17 C.21 PJ7004 Panel switch I/F connector (2-pin) Table C-21 USB connector PCB I/F connector (2-pin) Pin No. Signal name I/O P i n N o . Signal name I/O 1 PNLOFF-S3V I 2 GND - C.22 PJ8810 1st Battery connector (7-pin) Table C-22 1st Battery connector (7-pin) Pin N[...]

  • Página 316

    Appendices Appendix C Pin Assignment C-18 Satellite M30-35 Maintenance Manu al (960-455) C.25 PJ2000 Debugging port (4-pin) Table C-25 Debugging port (4-pin) Pin No. Signal name I/O Pin No. Signal name I/O 1 P3V - 2 DBGRX-P3P I 3 DBGTX-P3P O 4 GND -[...]

  • Página 317

    Appendix C Pin Assignment Appendices Satellite M30-35 Main tenance Manual (960-455) C-19 (only for FMSSY* 32M) C.26 PJ7003 USB connector PCB I/F connector (4-pin) Table C-26 USB connector PCB I/F connector (4-pin) Pin No. Signal name I/O P i n N o . Signal name I/O 1 USB1PS-E5V O 2 USBP2C-S3N O 3 USBP2C-S3P O 4 GND - (only for FMSMP* 64M) C.27 PJ70[...]

  • Página 318

    Appendices Appendix C Pin Assignment C-20 Satellite M30-35 Maintenance Manu al (960-455)[...]

  • Página 319

    Appendix D Keyboard Scan/Character Codes Appendices Satellite M30-35 Maintenance Manual (960-455) D-1 Appendix D Appendix D Keyboard Scan/Character Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 01 ‘ ~ 29 A9 0E F0 0E 02 1 ! 02 82 16 F0 16 03 2 @ 03 83 1E F0 1E 04 3 # 04 84 26 F0 [...]

  • Página 320

    Appendices Appendix D Keyboard Scan/Character Codes D-2 Satellite M30-35 Maintenance Manual (960-455) Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 29 | 2B AB 5D F0 5D *5 30 Caps Lock 3A BA 58 F0 58 31 A 1E 9E 1C F0 1C 32 S 1F 9F 1B F0 1B 33 D 20 A0 23 F0 23 34 F 21 A1 2B F0 2B 35 G 2[...]

  • Página 321

    Appendices Appendix D Keyboard Scan/Character Codes Satellite M30-35 Maintenance Manual (960-455) D-3 Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 58 Ctrl 1D 9D 14 F0 14 *3 60 Alt (L) 38 B8 11 F0 11 *3 61 Space 39 B9 29 F0 29 62 ALT (R) E0 38 E0 B8 E0 11 E0 F0 11 75 Ins E0 52 E0 D2 E0 [...]

  • Página 322

    Appendices Appendix D Keyboard Scan/Character Codes D-4 Satellite M30-35 Maintenance Manual (960-455) Table D-1 Scan codes (set 1 and set 2) (4/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 122 F11 57 D7 78 F0 78 *3 123 F12 58 D8 07 F0 07 *3 124 PrintSc *6 *6 *6 *6 *6 126 Pause *7 *7 *7 *7 *7 202 Fn — — — — *4 203 Win E[...]

  • Página 323

    Appendices Appendix D Keyboard Scan/Character Codes Satellite M30-35 Maintenance Manual (960-455) D-5 Table D-2 Scan codes with left Shift key Code set 1 Code set 2 Cap No. Key top Make Break Make Break 55 / E0 AA E0 35 E0 B5 E0 2A E0 F0 12 E0 4A E0 F0 4A E0 12 75 INS E0 AA E0 52 E0 D2 E0 2A E0 F0 12 E0 70 E0 F0 70 E0 12 76 DEL E0 AA E0 53 E0 D3 E0[...]

  • Página 324

    Appendices Appendix D Keyboard Scan/Character Codes D-6 Satellite M30-35 Maintenance Manual (960-455) Table D-3 Scan codes in Numlock mode Code set 1 Code set 2 Cap No. Key top Make Break Make Break 75 INS E0 2A E0 52 E0 D2 E0 AA E0 12 E0 70 E0 F0 70 E0 F0 12 76 DEL E0 2A E0 53 E0 D3 E0 AA E0 12 E0 71 E0 F0 71 E0 F0 12 79 ← E0 2A E0 4B E0 CB E0 A[...]

  • Página 325

    Appendices Appendix D Keyboard Scan/Character Codes Satellite M30-35 Maintenance Manual (960-455) D-7 Table D-5 Scan codes in overlay mode Code set 1 Code set 2 Cap No. Keytop Make Break Make Break 09 8 (8) 48 C8 75 F0 75 10 9 (9) 49 C9 7D F0 7D 11 0 (*) 37 B7 7C F0 7C 23 U (4) 4B CB 6B F0 6B 24 I (5) 4C CC 73 F0 73 25 O (6) 4D CD 74 F0 74 26 P (?[...]

  • Página 326

    Appendices Appendix D Keyboard Scan/Character Codes D-8 Satellite M30-35 Maintenance Manual (960-455) Table D-7 No.126 key scan code Code set 1 Code set 2 Key top Shift Make Make Pause Co mm o n * E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E *: This key generates only make codes.[...]

  • Página 327

    Appendix E Key Layout Appendices Appendix E Appendix E Key Layout E.1 United Kingdom (UK) Keyboard Figure E-1 UK keyboard E.2 United States (US) Keyboard Figure E-2 US keyboard Satellite M30-35 Maintenance Manual (960-455) E-1[...]

  • Página 328

    Appendices Appendix E Key Layout E-2 Satellite M30-35 Maintenance Manual (960-455)[...]

  • Página 329

    Appendix F Wiring Diagrams Appendices Appendix F Appendix F Wiring Diagrams F.1 Parallel Port Wraparound Connector -SELECT -PINT Figure F-1 Parallel port wraparound connector F.2 LAN Loopback Connector ( 1 ) BIBAP ( TX+ ) ( 2 ) BIDAN ( TX- ) (3) BIDBP (R X+) (6) BIDBN (RX-) Figure F-2 LAN loopback Connector Satellite M30-35 Maintenance Manual (960-[...]

  • Página 330

    Appendices Appendix F Wiring Diagrams F-2 Satellite M30-35 Maintenance Manual (960-455)[...]

  • Página 331

    Appendix G BIOS Rewrite Procedures Appendices Appendix G Appendix G BIOS Rewrite Procedures This Appendix explains how to rewrite the system BIOS program when you update the system BIOS. Tools To rewrite the BIOS, you need the following tool:  BIOS/EC/KBC rewriting disk for the com puter that has renewed BIOS data. Rewriting the BIOS 1. Set the [...]

  • Página 332

    Appendices Appendix G BIOS Rewrite Procedures G-2 Satellite M30-35 Maintenance Manual (960-455)[...]

  • Página 333

    Appendix I Reliability Appendices Appendix I Appendix I Reliability The following table shows MTBF (Mean Time between Failures). Table I-1 MTBF MTBF Time (hours) VRAM32MB (FMSSY* board) model 7323.49 VRAM64MB (FMSMP* board) model 7341.30 Satellite M30-35 Maintenance Manual (960-455) I-1[...]

  • Página 334

    Appendices Appendix I Reliability I-2 Satellite M30-35 Maintenance Manual (960-455)[...]

  • Página 335

    Appendix J SETUP Appendices Appendix J Appendix J SETUP This function displays the current system setup information. The options are listed blow. 1. Main (1) Total Memory (2) System Date (3) System Time (4) BIOS Ver. 2. Advanced (1) Power On Display (2) LCD Display Stretch (3) TV Type (4) Dynamic CPU Freq Mode (5) Built-in LAN (6) Network Boot Prot[...]

  • Página 336

    Appendices Appendix J SETUP To access the SETUP display, power on the computer and while “TOSHIBA” logo is displayed, press [F2] . Then, the main menu sim ilar to the one blow appears. There are five tabs (Main, Advanced, Security, Boot and Exit) in the SETUP menu. To move between the tabs, press ← or → . Each option is displayed on the men[...]

  • Página 337

    Appendix J SETUP Appendices Advanced 1. Power On Display [Auto-Selected] If any external display is connected, the power on display will be in analog RGB only mode. Otherwise it will be in LCD only mode. [LCD+Analog RGB] Display both the integrated LCD screen and analog RGB screen mode. 2. LCD Display Stretch [Enabled] LCD display stretch is enable[...]

  • Página 338

    Appendices Appendix J SETUP J-4 Satellite M30-35 Maintenance Manual (960-455) 9. Parallel Port Mode This option sets the mode for the parallel port using options. [ECP] Sets the port type to Extended Capabilities Port (ECP). For most printers, the port should be set to “ECP.” (Default) [Bi-derectional] This setting should be used with some othe[...]