Sony EVI-D70 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Sony EVI-D70. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Sony EVI-D70 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Sony EVI-D70 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Sony EVI-D70, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Sony EVI-D70 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Sony EVI-D70
- nombre de fabricante y año de fabricación del dispositivo Sony EVI-D70
- condiciones de uso, configuración y mantenimiento del dispositivo Sony EVI-D70
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Sony EVI-D70 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Sony EVI-D70 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Sony en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Sony EVI-D70, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Sony EVI-D70, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Sony EVI-D70. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

     2003 Sony Corporation Color Video Camera EVI-D70/D70P A-BS4-100- 11 (1) Technical Manual[...]

  • Página 2

    2 T able of Contents Features ..................................................................... 3 Connection ................................................................. 4 Locations of Controls ............................................... 5 Basic Functions ......................................................... 7 Initial Settings, Pos[...]

  • Página 3

    3 Overview Features •A n EXview HAD CCD provides 380,000 (EVI-D70)/ 410,000 (EVI-D70P) effective picture elements (pixels) enabling high-resolution imaging with this camera. • The use of VISCA commands allows you to control the camera from a computer. •H igh-speed, wide angle PAN and TILT functions and Image Flip (turning the displayed image [...]

  • Página 4

    4 Connection Connection 1) When the camera is connected to a computer with a VISCA cable (cross type, RS-232C), you can operate the camera with the computer. To obtain a cable, consult the dealer where you bought your camera. 2) For more detail on the VISCA RS-422 connection, see page 36. Video cable (not supplied) to Video input to VIDEO S-Video c[...]

  • Página 5

    5 Locations of Controls Locations of Controls Main Unit 1 34 2 qf qh qg Front Rear Bottom 56 7 8 9q ; q a q s q d 1 Lens A wide conversion lens can be attached. 2 Sensor for the Remote Commander 3 POWER lamp 4 STANDBY lamp 5 Sensor for the Remote Commander 6 IMAGE FLIP switch Flips the image upside down and executes Pan/Tilt movement according to t[...]

  • Página 6

    6 Locations of Controls Remote Commander POWER CAMERA SELECT 1 23 AUTO POSITION HOME RM-EV100 RESET PRESET STD REV BACK LIGHT MANUAL FAR FOCUS NEAR W T W T 123 456 PAN-TILT SLOW FAST ZOOM L/R DIRECTION SET PAN-TILT RESET DATA SCREEN 6 7 8 9 q; 1 2 3 4 5 1 CAMERA SELECT buttons 2 FOCUS buttons AUTO button FAR button NEAR button MANUAL button 3 DATA [...]

  • Página 7

    7 Basic Functions Basic Functions Zoom The camera employs an 18 × optical zoom lens combined with a digital zoom function allowing you to zoom up to 216 × . Lens specifications: Optical 18 × , f = 4.1 to 73.8 mm (F1.4 to F3.0) The horizontal angle of view is approximately 48 degrees (wide end) to 2.7 degrees (tele end). Digital Zoom enlarges the[...]

  • Página 8

    8 Basic Functions To avoid AF error from continuous 24 hour AF mode usage, daily initialization of lens system using the CAM_Initialize command is recommended. The CAM_Initialize command takes less than 3 seconds to initialize the focus and zoom. • Manual Focus Mode MF (Manual Focus) has both a Standard Speed Mode and a Variable Speed Mode. Stand[...]

  • Página 9

    9 Basic Functions AE – Shutter Priority The shutter speed can be set freely by the user to a total of 22 steps – 16 high speeds and 6 low speeds. When the slow shutter is set, the speed can be 1 / 30 , 1 / 15 , 1 / 8 , or 1 / 4 s. The picture output is read at a normal rate from the memory. The memory is updated at a low rate from the CCD. AF c[...]

  • Página 10

    10 Basic Functions When switching from the Shutter Priority mode to the Bright mode, the shutter speed set in the Shutter Priority mode is maintained. Spot Exposure Mode In Full Auto AE, the level for the entire screen is computed and the optimum Auto Iris and Gain levels are determined. In Spot AE, a particular section of the subject can be design[...]

  • Página 11

    11 Basic Functions Dark AGC MAX ICR ON GAIN IRIS ICR ON IRIS OPEN SHUTTER (Iris Min) (0dB) (1/60 sec) Bright Adjustable (Iris Open) (Gain Max) ICR ON t OFF Adjustable Dark AGC MAX ICR ON GAIN IRIS ICR ON IRIS OPEN (Iris Min) (0dB) (1/60 sec) Bright Adjustable (Slow Shutter Max) SHUTTER (Iris Open) (Gain Max) ICR ON t OFF Adjustable Auto ICR Mode Au[...]

  • Página 12

    12 Basic Functions Mute Blanks the screen and sends out a synchronizing signal. Lens Initialization Initializes the zoom and focus of the lens. Even when power is already on, it initializes the zoom and the focus. AutoPowerOff If an operation is not attempted via either a VISCA command or the remote controller during a pre-set time period (from 1 t[...]

  • Página 13

    13 Basic Functions Title Display The camera can be given a title containing up to 20 characters such as “ENTRANCE” or “LOBBY”. The position of the first character (horizontal, vertical) of the title, blinking state, and color can also be changed. Vposition 00 to 0A Hposition 00 to 17 Blink 00: Does not blink 01: Blinks 00 White 01 Yellow 02[...]

  • Página 14

    14 Basic Functions ALARM Setting Command List ALARM Inquiry Command List Command Set Command Command Packet Comments CAM_Alarm On 8x 01 04 6B 02 FF MD start Off 8x 01 04 6B 03 FF MD stop Set Mode 8x 01 04 6C pp FF Mode Setting *Select one from 13 modes Set Day Night Level 8x 01 04 6D 0p 0p 0p ppp: Day distinction AE level 0q 0q 0q FF qqq: Night dis[...]

  • Página 15

    15 Basic Functions Flowchart of 12 Modes Function Mode “00” Set the Focus Position Hysteresis. Set to the factory preset Alarm On Focus Position into memory AE moves Focus moves outside of the hysteresis. High level signal output * Repeat this loop until Alarm off. * Focus goes back to the previous position. Low level signal output Far Near Foc[...]

  • Página 16

    16 Basic Functions Mode “01” Alarm On Focus Position into memory AE moves. Hysteresis is set to the factory preset. Focus moves outside of the hysteresis. High level signal output * Repeat this loop until Alarm off. * AE does not move for a period of time. AE does not move for a period of time. Low level signal output Update the Focus position [...]

  • Página 17

    17 Basic Functions Mode “02” Set the AE level Hysteresis. Set to the factory preset Alarm On AE Level into memory AE moves. AE moves outside of the hysteresis. High level signal output * Repeat this loop until Alarm off. * AE goes back to the previous level. Low level signal output AE Level Bright Dark Hysteresis Low High[...]

  • Página 18

    18 Basic Functions Mode “03” Alarm On AE level into memory AE moves. Hysteresis is set to the factory preset. AE moves outside of the hysteresis. High level signal output * Repeat this loop until Alarm off. * AE does not move for a period of time. AE does not move for a period of time. Low level signal output Update the AE level data[...]

  • Página 19

    19 Basic Functions Details of Mode “01” to “03” T1 T2 T3 T1 T1 Alarm ON Hysteresis Focus Pos/ AE Level Reset T1: Reset interval timer (5sec) T2: Detect timer (2sec) T3: High level signal count timer (2sec) Signal level Low High Low T1: T2: T3: Reset Reset Reset[...]

  • Página 20

    20 Basic Functions Mode “04” Mode “05” High output result of mode “00” The same flow for the low level signal High output result of mode “02” High output High output result of mode “00” The same flow for the low level signal High output result of mode “03” High output[...]

  • Página 21

    21 Basic Functions Mode “06” Mode “07” High output result of mode “00” The same flow for the low level signal High output result of mode “02” High output High output result of mode “00” The same flow for the low level signal High output result of mode “03” High output[...]

  • Página 22

    22 Basic Functions Mode “08” Mode “09” High output result of mode “00” The same flow for low level signal High output result of mode “02” High output result of mode “02” High output High output High output High output result of mode “00” The same flow for low level signal High output result of mode “03” High output resul[...]

  • Página 23

    23 Basic Functions Mode “0A” Mode “0B” High output result of mode “00” The same flow for low level signal High output result of mode “02” High output result of mode “02” High output High output High output High output result of mode “00” The same flow for low level signal High output result of mode “03” High output resul[...]

  • Página 24

    24 Basic Functions Day-Night Mode (Mode “0C”) Set the Day-Night Mode and the Day/ Night AE level. Setting by the VISCA Cmd. Alarm On Starting distinction between Day and Night. AE moves. Yes Brightness is higher than Day AE level. No Yes High level signal output Brightness is higher than Night AE level. No Yes Low level signal output Low level [...]

  • Página 25

    25 Basic Functions Initial Settings, Position Preset Mode/Position Initial settings Position Position preset 1 preset 2 to 6 Pan/Tilt Position Home position aa Pan/Tilt Limit Position movable-range maximum a × Zoom Position Wide end aa D-Zoom On/Off On aa D-Zoom Separate/Combine Combine a × D-Zoom Position 00h aa Focus Position — aa Focus Auto/[...]

  • Página 26

    26 Basic Functions Mode/Position Initial settings Position Position preset 1 preset 2 to 6 Title Setting — a × Alarm On/Off Off a × Alarm Mode — a × Alarm Detect Level — a × Notes • The number of times data can be written to the EEPROM (by executing Position Preset) is limited. • If you want the camera status and Pan/Tilt positions in[...]

  • Página 27

    27 Basic Functions Mode Condition Basic settings Mode Power Off Initializing 1) IFC 2) Power On Freeze On Memory Recall Address Set aaaaa a IF_Clear aaaaa a Power On a ×× aa a Power Off a ×× aa a AutoPowerOff setting ×× × aa a NightPowerOff setting ××× aa a IR_Receive On/Off ××× aa a IR_ReceiveReturn_On/Off ××× aa a CAM_DeviceTypeIn[...]

  • Página 28

    28 Basic Functions White Balance Mode Power Off Initializing Power On Freeze On Memory Recall WB AUTO Indoor Outdoor OnePush ATW Manual WB Mode Switchover ×× a ×× aaaaaa One Push WB ×× a ××××× a ×× RGain Setting ×× a ××××××× a BGain Setting ×× a ××××××× a Lens Mode Power Off Initializing Power On Freeze On Memory Reca[...]

  • Página 29

    29 Basic Functions Effect settings, ICR Mode Power Off Initializing Power On Freeze On Memory Recall Aperture Setting ×× a ×× LR_Reverse On/Off ×× a ×× Freeze On/Off ×× aa × Picture Effect Setting ×× a ×× ICR On/Off ×× a ×× Auto ICR On/Off ×× a ×× Display On/Off ×× aaa Mute On/Off ×× aaa Title Setting ×× aaa Exposure Mo[...]

  • Página 30

    30 Basic Functions P an/Tilt, Memor y Function 1): a while the camera operates in the Tele/Wide zoom mode 2): a while the camera operates in the Far/Near focus mode 3): Freeze is set as off, and the setting is Memory Set. 4): Freeze is set as off, and the setting is Memory Recall. 5): a only for movements away from the direction where a position de[...]

  • Página 31

    31 Command List Command List VISCA 1) RS-232C/RS- 422 Commands Use of RS-232C/RS-422 control software which has been developed based upon this command list may cause malfunction or damage to hardware and software. Sony Corporation is not liable for any such damage. Overview of VISCA In VISCA, the side outputting commands, for example, a computer, i[...]

  • Página 32

    32 Command List VISCA Communication Specifications VISCA packet structure The basic unit of VISCA communication is called a packet (Fig. 2). The first byte of the packet is called the header and comprises the sender’s and receiver’s addresses. For example, the header of the packet sent to the EVI-D70/P assigned address 1 from the controller (ad[...]

  • Página 33

    33 Command List Command and inquiry ● Command Sends operational commands to the EVI-D70/P. ● Inquiry Used for inquiring about the current state of the EVI-D70/P. Command Packet Note Inquiry 8X QQ RR ... FF QQ 1) = Command/Inquiry, RR 2) = category code 1) QQ = 01 (Command), 09 (Inquiry) 2) RR = 00 (Interface), 04 (camera 1), 06 (Pan/Tilter) X =[...]

  • Página 34

    34 Command List VISCA Device Setting Command Before starting control of the EVI-D70/P, be sure to send the Address command and the IF_Clear command using the broadcast function. For VISCA network administration ● Address Sets an address of a peripheral device. Use when initializing the network, and receiving the following network change message. [...]

  • Página 35

    35 Command List • EVI-D70/P Windows D-sub 25 pin Pin assignment 8 7 6 5 4 3 2 1 IR OUT outputs the signals of the Remote Commander at 0 to 5 V when the IR OUT switch is set to ON. No Pins Signals 1 DTR DataTransmission Ready (OUTPUT) 2 DSR Data Set Ready (INPUT) 3 TXD Transmit Data (OUTPUT) 4 GND Ground 5 RXD Receive Data (INPUT) 6 GND Ground 7 I[...]

  • Página 36

    36 Command List The VISCA RS-422 connector pin assignments 12345 VISCA RS-422 67 89 Pin No. Function 1T XD IN+ 2T XD IN– 3 RXD IN+ 4 RXD IN– 5 GND 6T XD OUT+ 7T XD OUT– 8 RXD OUT+ 9 RXD OUT– Using the VISCA RS-422 connector plug 1 Grasp both ends of the VISCA RS-422 connector plug and pull it away from the rear panel of the camera, as shown[...]

  • Página 37

    37 Command List Command Command Message Reply Message General Command 81 01 04 38 02 FF 90 41 FF (ACK)+90 51 FF (Example) (Completion) 90 42 FF 90 52 FF 81 01 04 38 FF 90 60 02 FF (Syntax Error) (Example) 81 01 04 38 02 FF 90 60 03 FF (Example) (Command Buffer Full) 81 01 04 08 02 FF 90 61 41 FF (Example) (Command Not Executable) 90 62 41FF Inquiry[...]

  • Página 38

    38 Command List VISCA Camera-Issued Messages ACK/Completion Messages Command Messages ACK z0 4y FF (y:Socket No.) Completion z0 5y FF (y:Socket No.) Comments Returned when the command is accepted. Returned when the command has been executed. z = Device address + 8 Command Messages Syntax Error z0 60 02 FF Command Buffer Full z0 60 03 FF Command Can[...]

  • Página 39

    39 Command List Command Set Command Command Packet Comments AddressSet Broadcast 88 30 01 FF Address setting IF_Clear Broadcast 88 01 00 01 FF I/F Clear CommandCancel 8x 2p FF p: Socket No.(=1or2) CAM_Power On 8x 01 04 00 02 FF Power ON/OFF Off 8x 01 04 00 03 FF CAM_AutoPowerOff Direct 8x 01 04 40 0p 0q 0r 0s FF Auto Power Off pqrs: Power Off Timer[...]

  • Página 40

    40 Command List EVI-D70/P Command List (2/4) Command Set Command Command Packet Comments AF Sensitivity Normal 8x 01 04 58 02 FF AF Sensitivity Normal/Low Low 8x 01 04 58 03 FF CAM_AFMode Normal AF 8x 01 04 57 00 FF AF Movement Mode Interval AF 8x 01 04 57 01 FF Zoom Trigger AF 8x 01 04 57 02 FF Active/Interval Time 8x 01 04 27 0p 0q 0r 0s FF pq: M[...]

  • Página 41

    41 Command List EVI-D70/P Command List (3/4) Command Set Command Command Packet Comments CAM_ExpComp On 8x 01 04 3E 02 FF Exposure Compensation ON/OFF Off 8x 01 04 3E 03 FF Reset 8x 01 04 0E 00 FF Exposure Compensation Amount Setting Up 8x 01 04 0E 02 FF Down 8x 01 04 0E 03 FF Direct 8x 01 04 4E 00 00 0p 0q FF pq: ExpComp Position CAM_Backlight On [...]

  • Página 42

    42 Command List EVI-D70/P Command List (4/4) Command Set Command Command Packet Comments CAM_KeyLock Off 8x 01 04 17 00 FF Camera Control Enable/Disable On 8x 01 04 17 02 FF CAM_IDWrite 8x 01 04 22 0p 0q 0r 0s FF pqrs: Camera ID (=0000 to FFFF) CAM_Alarm On 8x 01 04 6B 02 FF Alarm ON/OFF Off 8x 01 04 6B 03 FF SetMode 8x 01 04 6C pp FF PP: Mode Sett[...]

  • Página 43

    43 Command List EVI-D70/P Inquiry Command List (1/2) Inquiry Command Command Packet Inquiry Packet Comments CAM_PowerInq 8x 09 04 00 FF y0 50 02 FF On y0 50 03 FF Off CAM_AutoPowerOffInq 8x 09 04 40 FF y0 50 0p 0q 0r 0s FF pqrs: PowerOff Timer CAM_NightPowerOff Inq 8x 09 04 41 FF y0 50 0p 0q 0r 0s FF pqrs: NightPowerOff Timer CAM_ZoomPosInq 8x 09 0[...]

  • Página 44

    44 Command List EVI-D70/P Inquiry Command List (2/2) Inquiry Command Command Packet Inquiry Packet Comments CAM_LR_ReverseModeInq 8x 09 04 61 FF y0 50 02 FF On y0 50 03 FF Off CAM_FreezeModeInq 8x 09 04 62 FF y0 50 02 FF On y0 50 03 FF Off CAM_PictureEffectModeInq 8x 09 04 63 FF y0 50 00 FF Off y0 50 02 FF Neg.Art y0 50 04 FF B&W CAM_ICRModeInq[...]

  • Página 45

    45 Command List Byte Bit Comments 7 6 Destination Address 5 0 4 3 2 Source Address 1 0 70 Completion Message (50h) 61 50 1 41 30 20 10 00 70 60 50 2 40 3 2 Zoom Position (HH) 1 0 70 60 50 3 40 3 2 Zoom Position (HL) 1 0 70 60 50 4 40 3 2 Zoom Position (LH) 1 0 70 60 50 5 40 3 2 Zoom Position (LL) 1 0 70 60 50 6 40 3 2 Focus Near Limit (H) 1 0 70 60[...]

  • Página 46

    46 Command List Camera control system inquiry commands .. Command Packet 8x 09 7E 7E 01 FF Byte Bit Comments 7 6 Destination Address 5 0 4 3 2 Source Address 1 0 70 Completion Message (50h) 61 50 1 41 30 20 10 00 70 60 50 2 40 3 2 R Gain (H) 1 0 70 60 50 3 40 3 2 R Gain (L) 1 0 70 60 50 4 40 3 2 B Gain (H) 1 0 70 60 50 5 40 3 2 B Gain (L) 1 0 Byte [...]

  • Página 47

    47 Command List Byte Bit Comments 7 6 Destination Address 5 0 4 3 2 Source Address 1 0 70 Completion Message (50h) 61 50 1 41 30 20 10 00 70 60 50 2 40 30 2 Auto ICR 1: On 0: Off 10 0 Power 1: On 0: Off 70 60 50 3 4 ICR 1: On 0: Off 3 Freeze 1:On 0:Off 2 LR Reverse 1:On 0:Off 10 00 70 60 50 4 4 Mute 1: On 0: Off 3 Title Display 1: On 0: Off 2 Displ[...]

  • Página 48

    48 Command List Enlargement Function Query Command ............... Command Packet 8x 09 7E 7E 03 FF Byte Bit Comments 7 6 Destination Address 5 0 4 3 2 Source Address 1 0 70 Completion Message (50h) 61 50 1 41 30 20 10 00 70 60 50 2 40 3 2 Digital Zoom Position (H) 1 0 70 60 50 3 40 3 2 Digital Zoom Position (L) 1 0 70 60 50 4 40 3 2 AF Activation [...]

  • Página 49

    49 Command List VISCA Command Setting V alues Exposure Control (1/2) NTSC PAL Shutter Speed 15 10000 10000 14 6000 6000 13 4000 3500 12 3000 2500 11 2000 1750 10 1500 1250 0F 1000 1000 0E 725 600 0D 500 425 0C 350 300 0B 250 215 0A 180 150 09 125 120 08 100 100 07 90 75 06 60 50 05 30 25 04 15 12 03 8 6 02 4 3 01 2 2 00 1 1 Iris 11 F1.4 10 F1.6 0F [...]

  • Página 50

    50 Command List Exposure Control (2/2) IRIS GA IN Bright 1F F1.4 28 dB 1E F1.4 26 dB 1D F1.4 24 dB 1C F1.4 22 dB 1B F1.4 20 dB 1A F1.4 18 dB 19 F1.4 16 dB 18 F1.4 14 dB 17 F1.4 12 dB 16 F1.4 10 dB 15 F1.4 8 dB 14 F1.4 6 dB 13 F1.4 4 dB 12 F1.4 2 dB 11 F1.4 0 10 F1.6 0 0F F2.0 0 0E F2.4 0 0D F2.8 0 0C F3.4 0 0B F4.0 0 0A F4.8 0 09 F5.6 0 08 F6.8 0 0[...]

  • Página 51

    51 Command List When using Digital Zoom Separate Mode (CAM_DZoomPos Inq) Magnification Position Data × 10 0 × 28 0 × 3A A × 4C 0 × 5C C × 6D 5 × 7D B × 8E 0 × 9E 3 × 10 E6 × 11 E8 × 12 EB Lens Control Others Title Setting Vposition 00 to 0A Hposition 00 to 17 Blink 00: Does not blink 01: Blinks 00 White 01 Yellow 02 Violet Color 03 Red [...]

  • Página 52

    52 D30/31 Mode D30/D31 Mode Overview The D30/D31 mode allows you to control the EVI- D70/P using VISCA commands for the EVI-D30/D31. Most of the VISCA commands for the EVI-D70/P correspond to one for the EVI-D30/D31. However, some of the VISCA commands for the EVI-D70/P are different from those for the EVI-D30/D31 in definitions of parameters. When[...]

  • Página 53

    53 D30/31 Mode When accepting commands Type of command D30/D31 mode on D30/D31 mode off Common to both the D30/D31 and Common parameters Accepts as is D70/P Different parameters Translates the D30/D31’s parameters to Accepts as is those of the D70/P CAM_Memory Reset Memorized data items are erased and Memorized data items are erased camera settin[...]

  • Página 54

    54 D30/31 Mode The D70/P parameters that correspond to the Wide and the Tele end of the D30/D31 are approximately 0000h and 3B4Bh. However, at the Wide end, the horizontal viewing angles are 48.8˚ for the D30/D31, and 48.0˚ for the D70/P. Received parameters (0000h ~ 03FFh) will be converted within a range of 0000h to 3B4Bh. For D30/ D31 mode, th[...]

  • Página 55

    55 D30/31 Mode EVI-D30 EVI-D70 Parameters Shutter speed Parameters Shutter speed 0000h (1/60) b 0006h (1/60) 0001h (1/60) b 0006h (1/60) 0002h (1/75) b 0006h (1/60) 0003h (1/90) b 0007h (1/90) 0004h (1/100) b 0008h (1/100) 0005h (1/125) b 0009h (1/125) 0006h (1/150) b 0009h (1/125) 0007h (1/180) b 000Ah (1/180) 0008h (1/215) b 000Ah (1/180) 0009h ([...]

  • Página 56

    56 D30/31 Mode EVI-D30/D31 EVI-D70/P Parameters Gain (dB) Parameters Gain (dB) 0000h -3 b 0000h -3 0001h 0 b 0001h 0 0002h 3 b 0003h 4 0003h 6 b 0004h 6 0004h 9 b 0006h 10 0005h 12 b 0007h 12 0006h 15 b 0009h 16 0007h 18 b 000Ah 18 Gain conversion • Parameter conversion when a command is received D30/D31 parameters are converted to D70/P paramete[...]

  • Página 57

    57 D30/31 Mode Speed (deg/sec) Parameters D70/P D30/D31 01h 1.7 b 3.3 02h 4.3 b 6.7 03h 7.4 b 10 04h 9.8 b 13.3 05h 13.2 b 16.7 06h 18.0 b 20 07h 21.8 b 23.3 08h 25.0 b 26.7 09h 28.8 b 30 0Ah 31.5 b 33.3 0Bh 34.5 b 36.7 0Ch 39.3 b 40 0Dh 47.0 b 43.3 0Eh 49.0 b 46.7 0Fh 54.1 b 50 10h 56.6 b 53.3 11h 61.8 b 56.7 12h 64.7 b 60 13h 69.3 b 63.3 14h 72.2[...]

  • Página 58

    58 D30/31 Mode D30 D70 Pan/Tilt Pan Tilt FC90h b FACBh – …… – FED4h b FE3Ah FEB3h …… … FFFDh b FFFCh FFFDh FFFEh b FFFDh FFFEh FFFFh b FFFFh FFFFh 0000h b 0000h 0000h 0001h b 0001h 0001h 0002h b 0003h 0002h 0003h b 0004h 0003h 0004h b 0006h 0004h 0005h b 0007h 0005h 0006h b 0009h 0006h 0007h b 000Ah 0007h 0008h b 000Ch 0008h 0009h b 0[...]

  • Página 59

    59 Specifications Specifications Input/output control terminals VISCA RS-232C: 8 pin mini DIN (input: 1, output: 1) VISCA RS-422: 9 pin Control signal format 9600 bps/38400 bps Data: 8 bit Stop bit: 1 Power terminal JEITA type4 General Input voltage DC 12 V (DC 10.8 to 13 V) Current consumption 1.0 A (at 12 V DC) Operating temperature 0 °C to +40 [...]

  • Página 60

    60 Specifications Front Right side Top Bottom Unit: mm (inches) 132 (5 3 / 16 ) 113 (4 7 / 16 ) 146 (5 3 / 4 ) 162 (6 3 / 8 ) 170° 170° 90° 30° 66 (2 19 / 32 ) 144 (5 21 / 32 ) 7.4 ( 9 / 32 ) 24.5 ( 31 / 32 ) 10 ( 13 / 23 ) 14 ( 9 / 16 ) 20 ( 25 / 32 ) φ 5 ( 3 / 16 ), depth 5 ( 3 / 16 ) Tripod screw hole 1/4-20 UNC, depth 6.5 ( 1 / 4 ) Dimensi[...]

  • Página 61

    61 Specifications Software Use of the demonstration software developed by Sony Corporation or use of the software with customer developed application software may damage hardware, the application program or the camera. Sony Corporation is not liable for any damages under these conditions. Operation Start the camera control software on your computer[...]