Sharp XG-P560W manual

MODEL XG-P560W XG-P560W -N DA TA PR OJECT OR SETUP MANU AL Setting up the Screen .......................................... 2 Screen Size and Projection Distance ................ 3 Connecting Pin Assignments .......................... 11 Wired Remote Control T erminal Specifications ...... 13 RS-232C Specifications and Commands ........ 14 Setting [...]

-2 For optimal image quality , position the pr ojector perpendicular to the screen with the projector’ s feet flat and level. Doing so will eliminate the need for Ke ystone correction and pro vide the best image quality . Note • The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens ce[...]

-3 Screen Size and Projection Distance The projection screen size v aries according to the distance fr om the lens of the projector to the screen. The optional lenses fr om Sharp are also available f or specializ ed application. Please see your nearest Sharp A uthorized Pr ojector Dealer to details on all the lenses. (Refer to the lens operation ma[...]

-4 Standard Zoom Lens (AN-P18EZ : Standard Equipment with XG-P560W) F2.5, f=25.5-32 mm 16:10 Signal Input (Normal Mode) The f or mula for picture siz e and projection distance [m/cm] L1 (m) = 0.0392 χ L2 (m) = 0.0491 χ H1 (cm) = –1.56815 χ H2 (cm) = 0.2221 χ W (cm) = ± 0.75379 χ [Feet/inches] L1 (ft) = 0.0392 χ / 0.3048 L2 (ft) = 0.0491 χ[...]

-5 Fixed Wide Lens (AN-P8EX) F2.5, f=11.6 mm 16:10 Signal Input (Normal Mode) The f or mula for picture siz e and projection distance [m/cm] L (m) = 0.01744 χ H1 (cm) = – 0.96916 χ H2 (cm) = – 0.37689 χ W (cm) = ±0.23691 χ [Feet/inches] L (ft) = 0.01744 χ / 0.3048 H1 (in) = – 0.96916 χ / 2.54 H2 (in) = – 0.37689 χ / 2.54 W (in) = ±[...]

-6 Fixed Wide Lens (AN-P12EX) F2.5, f=17.1 mm 16:10 Signal Input (Normal Mode) The f or mula for picture siz e and projection distance [m/cm] L (m) = 0.02619 χ H1 (cm) = – 0.96916 χ H2 (cm) = – 0.37689 χ W (cm) = ±0.23691 χ [Feet/inches] L (ft) = 0.02619 χ / 0.3048 H1 (in) = – 0.96916 χ / 2.54 H2 (in) = – 0.37689 χ / 2.54 W (in) = ?[...]

-7 Wide-zoom Lens (AN-P15EZ) F2.5, f=21.2-25.8 mm 16:10 Signal Input (Normal Mode) The f or mula for picture siz e and projection distance [m/cm] L1 (m) = 0.03274 χ L2 (m) = 0.0392 χ H1 (cm) = – 1.56815 χ H2 (cm) = 0.2221 χ W (cm) = ±0.75379 χ [Feet/inches] L1 (ft) = 0.03274 χ / 0.3048 L2 (ft) = 0.0392 χ / 0.3048 H1 (in) = – 1.56815 χ [...]

-8 Tele-zoom Lens (AN-P23EZ) F2.5, f=31.9-42.5 mm Note • Allow a margin of error in the v alue in the diagrams abo ve . • When the distance from the lens center to the bottom of the image [H] is a negativ e number , this indicates that the bottom of the image is below the lens center . 16:10 Signal Input (Normal Mode) The f or mula for picture [...]

-9 Tele-zoom Lens (AN-P30EZ) F2.5, f=40.8-62.8 mm Note • Allow a margin of error in the v alue in the diagrams abo ve . • When the distance from the lens center to the bottom of the image [H] is a negativ e number , this indicates that the bottom of the image is below the lens center . 16:10 Signal Input (Normal Mode) The f or mula for picture [...]

-10 Tele-zoom Lens (AN-P45EZ) F2.5, f=62.1-97.8 mm Note • Allow a margin of error in the v alue in the diagrams abo ve . • When the distance from the lens center to the bottom of the image [H] is a negativ e number , this indicates that the bottom of the image is below the lens center . 16:10 Signal Input (Normal Mode) The f or mula for picture[...]

-11 5 10 15 1 11 6 COMPUTER/COMPONENT input and COMPUTER/COMPONENT output T erminals: mini D-sub 15 pin f emale connector Connecting Pin Assignments RGB Input 1. Video input (red) 2. Video input (green/sync on green) 3. Video input (blue) 4. Not connected 5. Not connected 6. Ear th (red) 7. Ear th (green/sync on green) 8. Ear th (blue) 9. Not conne[...]

-12 Connecting Pin Assignments RS-232C T erminal: D-sub 9 pin male connector Pin No. Signal Name I/O Reference 1 Not connected 2R D Receive Data Input Connected to inter nal circuit 3S D Send Data Output Connected to internal circuit 4 Not connected 5S G Signal Ground Connected to internal circuit 6 Not connected 7R S Request to Send Connected to C[...]

-13 Specifications of wir ed remote contr ol input • • • • • ø3.5 mm minijack • • • • • External: GND • • • • • Internal: +3.3V Function and transmission codes Wired Remote Contr ol T erminal Specifications C1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 C2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C3 1[...]

-14 Computer contr ol A computer can be used to control the pr ojector by connecting an RS-232C serial control cable (cr oss type, commerciall y availab le) to the projector . (See page 27 of the projector’ s operation manual f or connection.) Communication conditions Set the serial port settings of the computer to match that of the table. Signal[...]

-15 → ← PO W R _ 1 __ OK Projector Computer RS-232C Specifications and Commands CONTROL CONTENTS Po wer ON Standby mode (or 40-second startup time) COMMAND P ARAMETER RETURN P P P T T T T T T T T T T T L L T M S P P P P I I I I I I I I I I L L L L L L L L K K K I V V M M F F A R R R R R R R O O O A L L P L L L L L L L P P N N N J J J J R R R R [...]

-16 CONTROL CONTENTS Po wer ON Standby mode (or 40-second startup time) COMMAND P ARAMETER RETURN OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK[...]

-17 RS-232C Specifications and Commands CONTROL CONTENTS Po wer ON Standby mode (or 40-second startup time) COMMAND P ARAMETER RETURN OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or [...]

-18 CONTROL CONTENTS Po wer ON Standby mode (or 40-second startup time) COMMAND P ARAMETER RETURN OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK[...]

-19 RS-232C Specifications and Commands CONTROL CONTENTS Po wer ON Standby mode (or 40-second startup time) COMMAND P ARAMETER RETURN OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or [...]

-20 1. Connecting the projector to a computer Setting up the Pr ojector Netw ork En vironment This section describes the basic procedure f or using the projector via the netw ork. If the network is already constructed, the projector’ s network settings may need to be changed. Please consult your netw ork administrator for assistance with these se[...]

-21 Setting up the Projector Netw ork En vironment 1. Connecting the Pro- jector to a Computer Establishing a one-to-one connection fr om the projector to a computer . Using a commer cially av ailable LAN cable ( UTP cable, Category 5, cross-o ver type) you can configure the pr o- jector via the computer . 1 Disconnect the computer’ s LAN cable f[...]

-22 XXXXXXXXX Setting up the Pr ojector Network En vironment 2. Setting an IP Address for the Computer The follo wing describes how to make settings in Windo ws Vista ® . 1 Log on the network using the administrator’ s account for the computer . 2 Click “star t”, and clic k “Control P anel”. 3 Click “View network status and tasks” of[...]

-23 Setting up the Projector Netw ork En vironment 1 2 5 Click “Internet Protocol V ersion 4 (TCP/IPv4)”, and clic k the “Properties” button. 6 Confirm or change an IP address f or the setup computer . 1 Confirm and note the current IP ad- dress, Subnet mask and Default gatewa y . Mak e sure to note the current IP ad- dress , Subnet mask an[...]

-24 Setting up the Pr ojector Network En vironment 3. Setting up a Network Connection for the Projector Settings for suc h items as the projector’ s IP address and subnet mask are compatible with the existing netw ork. Set each item on the pr ojector as follows. (See page 64 of the projector’ s operation manual f or setting.) DHCP Client : OFF [...]

-25 Setting up the Projector Netw ork En vironment 4 The TCP/IP setting screen ap- pears, ready f or network settings f or the projector . Note • Confirm the existing network’ s segment (IP address group) to a void setting an IP ad- dress that duplicates the IP addresses of other network equipment or computers. If “192.168.150.2” is not use[...]

-26 Contr olling the Pr ojector via LAN Controlling the Projector Using Internet Explorer (Version 5.0 o r later) Complete connections to external equipment before starting the operation. (See pages 24- 27 of the projector’ s operation manual.) Complete the A C cord connection. (See page 28 of the projector’ s operation manual.) Note • When c[...]

-27 Confirming the Projector Status (Status) On this screen, y ou can confirm the projector status. Y ou can confirm the following items : • • • • • MA C Address • • • • • Po wer • • • • • Condition • • • • • Lamp Timer 1 • • • • • Lamp Timer 2 • • • • • Lamp Life 1 • • • • • Lam[...]

-28 Contr olling the Projector via LAN Setting and Adjusting the Projector (Settings & Adjustments ) Example: “Picture” screen display for COMPUTER1 On these screens, you can make pr ojector settings or adjust ments. Y ou can set or adjust the follo wing items : Setting the Security (Network – Security) On this screen, you can make settin[...]

-29 Contr olling the Projector via LAN Making General Settings for the Network (Network – General) On this screen, you can make general settings relating to the netw ork. After clic king the “Apply” button, the set val- ues appear . Confirm that the values are set properl y , and then clic k the “Confirm” but- ton. Note • After setting [...]

-30 Contr olling the Projector via LAN Set ting Error Items and Destination Addresses to which E - m ail is to be Sent when an Error Occurs (Mail – Recipient Settings) On this screen, you can input e-mail destina- tions to which err or notification (error items) e-mails are sent. Note • E-mail Address can be up to 64 characters. • Y ou can in[...]

-31 Setting the Pr ojector Using RS-232C or T elnet When Connecting Using RS-232C 1 Launch general purpose terminal emulator . 2 Input settings for the RS-232C port of the terminal em ulator as follows. Baud Rate : 9600 bps* Data Length : 8 bit Pa r ity Bit : None Stop Bit : 1 bit Flow Control : None * This is the f actor y default setting. If the [...]

-32 Setting the Pr ojector Using RS-232C or T elnet When Connecting Using Telnet 1 Click “s tar t” fr om the Windows ® desk- top and select “Run”. 2 Enter “telnet 192.168.150.2” in the text bo x that opens up. (If the IP address of the projector is 192.168.150.2.) 3 Click the “OK” button. 4 “User Name:” is displayed. Input the [...]

-33 Setting the Projector Using RS-232C or T elnet SETUP MENU (Main Menu) [1] IP Address (Factory default setting : 192.168.150.2) IP address settings. (P age 36 ) [2] Subnet Mask (Factory default setting : 255.255.255.0) Subnet mask settings. (Page 36 ) [3] Default Gateway (F actory default setting : Not Used) Def ault gatewa y settings. (Page 36 [...]

-34 Contr olling the Pr ojector Using RS-232C or T elnet View Setting Detail List ([V]View All Setting) 1 1 1 1 1 Enter “v” and press the “Enter” key . Display all setting v alues(*). Enter number or symbol of item to be selected on the SETUP MENU . When setting, input the details to be set. Setting is carried out one item at a time, and sa[...]

-35 Controlling the Pr ojector Using RS-232C or T elnet Save Settings and Quit ([S]Save & Quit) Sav e set v alues and quit menu. 1 1 1 1 1 Enter “s” and press the “Enter” key . 2 2 2 2 2 Enter “y” and press the “Enter” key . ▼ SETUP MENU ---------------------------------SETUP MENU-------------------------------- [1]IP Address [...]

-36 Contr olling the Projector Using RS-232C or T elnet IP Address Setting ([1]IP Address) Setting of IP address. 1 1 1 1 1 Enter “1” and press the “Enter” key . 2 2 2 2 2 Enter numerical value to be set and press the “Enter” key . Display IP address after change (*). Subnet Mask Setting ([2]Subnet Mask) Setting subnet mask. 1 1 1 1 1 E[...]

-37 Controlling the Pr ojector Using RS-232C or T elnet Password Setting ([5]Password) Carr ying out security protection using password. 1 1 1 1 1 Enter “5” and press the “Enter” key . 2 2 2 2 2 Enter passw ord and press the “Enter” key . Displa y set password (*). Note • P assword can be up to 8 char acters. • Y ou can input the ch[...]

-38 Contr olling the Projector Using RS-232C or T elnet Disconnecting All Connec- tions ([D]Disconnect All) It is possible to disconnect all the TCP/IP connec- tions currently recognized b y the projector . Even if the COM Redirect por t is fixed in the Busy status due to a problem, it is possib le to f orce the Ready status bac k by carr ying out [...]

-39 Controlling the Pr ojector Using RS-232C or T elnet Carrying out Network Ping Test (ADVANCED[5]Network Ping Test) It is possible to confirm that a network connection between the projector and a computer etc. is work- ing normally . 1 1 1 1 1 Enter “5” and press the “Enter” key . 2 2 2 2 2 Enter IP address of de vice to be tested and pre[...]

-40 Contr olling the Projector Using RS-232C or T elnet Setting of Search Port (ADVANCED[0]Search Port) Sets the por t number used when searching f or the projector from the network. 1 1 1 1 1 Enter “0” and press the “Enter” key . 2 2 2 2 2 Enter numerical v alue and press the “Enter” key . Displa y set numerical value (*). Note • Set[...]

-41 Stac k Pr ojection The stack pr ojection allows you to increase the brightness of an ima ge by stacking tw o projector s and projecting same ima ge simultaneously . Info • To set up the stac k projection, assign a projector as the master and the other projector as the slav e and connect the projectors with commercially av ailable LAN cables ([...]

-42 Stac k Projection Setting up the Stack Projection Basic This part shows an example f or setting up the stack pr ojection of a computer image with two pr ojectors. Projector 1: Master Projector 2: Slave RGB cable RGB cable MONITOR OUT (FOR COMPUTER/ COMPONENT1, 2) terminal COMPUTER/COMPONENT1 terminal COMPUTER/COMPONENT1 terminal LAN terminal LA[...]

-43 Stack Pr ojection Projector 1: Master Projector 2: Slave Video equipment Distributor RGB cable 5BNC to mini D-sub 15 pin cable Composite video cable RGB cable MONITOR OUT (FOR COMPUTER/ COMPONENT1, 2) terminal COMPUTER/COMPONENT1 terminal COMPUTER/COMPONENT1 terminal COMPUTER/COMPONENT2 terminal VIDEO terminal VIDEO terminal LAN terminal LAN te[...]

-44 Video W all Pr ojection Info • Bef ore setting up the video wall projection, install Internet Explorer (version 5.0 or later). • Video wall is not compatib le with resolutions higher than SXGA. • Image quality ma y deteriorate when picture signals are input through multiple projectors with an RGB cable or an RCA cab le in a daisy chain co[...]

-45 Video W all Projection Setting up the Video Wall Projection Basic Following is an e xample of how to b uild a 2 X 2 video wall using 4 projectors. Projector 1 Projector 2 Projector 3 Projector 4 COMPUTER/COMPONENT1 terminal RGB cable RGB cable RGB cable RGB cable MONITOR OUT (FOR COMPUTER/ COMPONENT1,2) terminal COMPUTER/COMPONENT1 terminal COM[...]

-46 Video W all Projection 1 Access one of the four pr ojectors via Internet Explorer . (See “Controlling the Projector Using Inter net Explorer (V ersion 5.0 or later)” (page 26 ) f or the details.) 2 Click “Video Wall” on the menu. • “Video W all” display will appear . 3 Select “2 X 2” on “Division”. 1 2 3 4 1 1 1 1 1 Select[...]

-47 Video W all Projection The numbers of the projector ref er to the numbers of the projected positions. 12 2 3 3 45 5 56 789 1 2 3 4 5 6 7 8 9 2 The numbers of the projector ref er to the numbers of the projected positions. 123 456 789 1 2 3 4 5 6 7 8 9 Assigning the Projected Image on the Video Wall Setup Followings are e xamples for assigning t[...]

-48 Video W all Projection Notes on the Wide Video Wall Projection Selecting “2 X 1”, “3 X 1”, “4 X1”, “5 X 1”, “6 X 1”, “7 X 1” or “8 X 1” on “Division” (see page 46 ) allows y ou to create the wide video wall. To create the wide video wall with three projector s lining up in single file from left to right (as sho w[...]

-49 Video W all Projection Projector 1 : Master Projector 2 : Slave Projector 3: Slave Projector 4 : Slave RGB cable 5BNC to mini D-sub 15 pin cable RGB cable RGB cable RGB cable LAN terminal VIDEO terminal COMPUTER/COMPONENT2 terminal MONITOR OUT (FOR COMPUTER/ COMPONENT1, 2) terminal LAN terminal LAN terminal LAN terminal VIDEO terminal VIDEO ter[...]

-50 Video W all Projection Projector 1: Master Projector 2: Slave Projector 3: Slave Projector 4: Slave LAN terminal LAN terminal LAN terminal LAN terminal LAN cable LAN cable (straight-through type) Hub Computer 1 Change the TCP/IP settings f or the computer as shown belo w . (See “Setting an IP Address for the Computer” on page 22 f or the de[...]

-51 Video W all Projection 4 T urn on all of the pr ojectors. 5 Access the pr ojector 1 from the computer via Internet Explorer . (See “Controlling the Projector Using Inter net Explorer (V ersion 5.0 or later)” on page 26 for the details.) 6 Click “Stack” on the menu. 7 Select “Master” on “Stack Setting”. • “Slav e Address” d[...]

-52 Video W all Projection Master Set Inputs ON ON OFF OFF ON OFF ON OFF OFF OFF ON OFF Slave Set Inputs COMPUTER1 COMPUTER2 DV I HDMI VIDEO S-VIDEO COMPUTER1 COMPUTER2 DV I HDMI VIDEO S-VIDEO Projector 1 Projector 2-4 13 Repeat the same procedure fr om the step 10 to 12 for the pr ojector 3 and 4. 14 Select inputs as specified in the table on the [...]

-53 1 Click “Star t” – “All Pr ograms” – “Accessories” – “Communica- tions” – “HyperT erminal”. • If you do not ha ve HyperT erminal in- stalled, see the operation manual of y our computer . • Depending on the settings of your com- puter , you may be required to enter y our area code and other details. Enter the inf [...]

-54 Resetting the Lamp Timer of the Pr ojector via LAN 5 Click “Properties” on the “File” menu. 6 Click the “Settings” tab, and then c lick “ASCII Setup”. 7 Select the chec k bo xes next to “Send line ends with line feeds”, “Echo typed character s locally”, and “Append line feeds to in- coming line ends”, and click “OK[...]

-55 Comm unication cannot be established with the pr ojector When connecting the projector using serial-connection Check that the RS-232C terminal of the projector and a computer or the commercially av ailable controller are connected correctly . Check that the RS-232C cab le is a cross-ov er cable. Check that the RS-232C port setting for the[...]

-56 Tr oubleshooting Ta ke the following steps f or checking the network settings for the computer . 1. Open a command prompt. • In the case of Windows ® 2000: click “star t” ➔ “Programs” ➔ “Accessor ies” ➔ “Command Prompt” in order . • In the case of Windows ® XP , Windows Vista ® : click “star t” ➔ “All Prog[...]

-57 Check if the “TCP/IP” protocol is operating correctly using the “PING” command. Also, chec k if an IP address is set. 1. Open a command prompt. • In the case of Windows ® 2000: click “star t” ➔ “Programs” ➔ “Accessor ies” ➔ “Command Prompt” in order . • In the case of Windows ® XP , Windows Vista ® : click[...]

-58 Dimensions Units: inches (mm) Side View Side View Top View Rear View Front View Bottom View M6 M6 M6 M6 21 / 64 (8) 19 11 / 16 (500) 25 3 / 32 (637) 7 31 / 64 (190) 19 / 64 (7.5) 63 / 64 (25) 13 / 64 (5) 1 31 / 32 (50) 7 7 / 8 (200) 3 39 / 64 (91.5) 4 7 / 8 (123.5) 11 61 / 64 (303.5) 8 19 / 64 (210.5) 2 39 / 64 (66) 3 5 / 64 (78) 1 31 / 32 (50)[...]

-59 Dimensions Pr ojector and Lens Dimensions [When AN-P8EX is installed] [When AN-P12EX is installed] [When AN-P15EZ is installed] 25 3 / 32 (637) 3 57 / 64 (98.5) 2 29 / 32 (73.6) Lens center 25 3 / 32 (637) 3 57 / 64 (98.5) Lens center 1 27 / 32 (46.7) 3 / 64 (1) 25 3 / 32 (637) 3 57 / 64 (98.5) Lens center 1 / 16 (1.2) 11 / 16 (17.4) [When AN-P[...]