Samsung SCD-2080R manual

High Resolution Day/Night IR Dome Camera User Manual SCD-2080R[...]

High Resolution Da y/Night IR Dome Camera User Manual Copyright ©2 010 Sa ms ung Tech wi n Co. , Ltd . Al l ri gh ts r es er ve d. Tr a d e m a r k is th e regi ste red l ogo o f Sa msun g Techwi n Co., L td. Th e name o f thi s pro duc t is th e regi ste red t rad ema rk of S ams ung Tech win C o., Lt d. Ot her t rad emar ks m ent ion ed in t his[...]

Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description. ■ SCD-2080R SERIES • NTSC MODEL • PAL MODEL SCD-2080RN SCD-2080RP ■ MODEL DESCRIPTION • SCD-2080RX _ SIGNAL SYSTEM • SIGNAL SYSTEM N → NTSC MODEL P → PAL MODEL[...]

4_ safety information safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this u[...]

English_5 ● SAFETY INFORMATION c e e Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers fi lled with water on top of the camera. doing so may cause personal injury due to fi re, electric shock, or falling objects. Do not install the unit in humid, dusty, or sooty locations. doing so may cause fi re or e[...]

safety information 6_ safety information FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. CAUTION This equipment has [...]

English_7 ● SAFETY INFORMATION o e e e t important safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install ne[...]

8_ contents INTRODUCTION 9 9 Features 10 What’s included 11 Component names and Functions INSTALLATION 12 12 Installation 15 Adjust the panning and tilting while watching the monitor CONNECTION 16 16 Connecting to Monitor 16 Connecting to Power 17 Using Coaxial Communications SETUP 18 18 Menu Confi gration 18 Menu Setup contents TROUBLESHOOTING [...]

English_9 ● INTRODUCTION FEATURES Ultra High Resolution By adopting a diagonal 6mm(1/3") 410,000 (NTSC) pixels, 470,000(PAL) pixels SONY CCD, the camera produces clear picture quality with a horizontal resolution of 600 TV lines for color and 700 TV lines for BW Excellent Sensitivity The Built-in high sensitivity COLOR CCD enables a clear im[...]

10_ introduction introduction Miscellaneous Functions HLC(High Light Compensation), SENS-UP, H/V-REV, D-ZOOM, SHARPNESS, MOTION DETECTION and PRIVACY functions are provided. OSD The camera control is convenient by using 18 different foreign language O.S.D. - NTSC : English, French, Spanish, Japanese, Korean, Portuguese, Taiwanese - PAL : English, F[...]

English_11 ● INTRODUCTION COMPONENT NAMES AND FUNCTIONS FRONT ❶ Pan Base : control panning angle of camera ❷ Tilt Base : control tilting angle of camera ❸ Video Output Terminal to Monitor ❹ x3.6 Vari-focal Lens Module 2.8 ~ 10.0mm (F1.2) ❺ Function Setup switch : Display the menu on the screen and move the cursor to four directions to c[...]

12_ installation INSTALLATION Separate the dome cover by turning anti-clockwis. Separate the shield case by pulling from the camera body. 1. 2. The installation should be done by qualifi ed service personnel or system installers. If the ceiling material is not strong enough to hold the installation screws, the camera may fall off. Reinforce the ce[...]

English_13 ● INSTALLATION e r f WHEN USING THE CEILING BRACKET Hold the ceiling bracket (located where the arrow points to) and separate it from the main body of the camera by rotating it anti-clockwise. (refer to the picture in 'Notes' on page 12) Place the separated ceiling bracket so that the “Front” side faces the area to be mon[...]

installation 14_ installation If you want to install the camera with the ceiling bracket combined, fi x it using two M4 tapping screws at the side of the main body (refer to the [Figure-2] on page 14)  A W [Figure-2] M4 tapping screw Pan Base fixation screw[...]

English_15 ● INSTALLATION n g ADJUST THE PANNING AND TILTING WHILE WATCHING THE MONITOR You can adjust the camera to point in any direction by using the pan, Tilt mechanism. Pan Base can rotates by ±176°(total 352°) Tilt Base covers 73˚ angle. Rotate Base moves by 174° to each side direction and 348° on the whole. Methods of adjustment When[...]

16_ connection connection CONNECTING TO MONITOR Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor. As the connecting method varies with the instruments, refer to the manual supplied with the instrument. Only connect the cable when the power is turned off. CONNECTING TO POWER Connect the adaptor to the power input connector as shown in the [...]

English_17 ● CONNECTION A . e , s * Standard voltage for camera operation : DC 12V ± 10% * There may be some deviation in voltage drop depending on the type of wire and the manufacturer. Be sure to connect power only after all the installation is complete. Ground should be connected to the GND terminal. USING COAXIAL COMMUNICATIONS Coaxial Commu[...]

18_ setup setup MENU CONFIGRATION Setup Menu LENS ● DC EXPOSURE ● BRIGHTNESS ● SHUTTER ● AGC ● SENS-UP ● RETURN WHITE BALANCE ● ATW ● OUTDOOR ● INDOOR ● MANUAL ● AWC → SET SSDR ● OFF ● ON BACKLIGHT ● OFF ● BLC ● HLC SSNR3 ● OFF ● ON DAY/NIGHT ● AUTO ● COLOR ● B/W SPECIAL ● IMAGE ADJ ● MONITOR ● CAM [...]

English_19 ● SETUP MAIN SETUP 䯝 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.SSDR OFF 5.BACKLIGHT OFF 6.SSNR3 ON 7.DAY/NIGHT AUTO 8.SPECIAL 9.EXIT SAVE Change the status by moving the setup switch left or right. Select the function by moving up or down direction of function setup switch. Select a desired function using the Function Setup switch. Plac[...]

20_ setup setup Select a desired mode using the Function Setup switch. BRIGHTNESS : Adjusts the video brightness. SHUTTER : You can select either auto or manual shutter. A.FLK : Select this when you experience picture fl icker, which can happen when there is a clash with the frequency of the installed lighting. ESC : Select this to control the shu[...]

English_21 ● SETUP WHITE BAL (WHITE BALANCE) Use the White Balance function to adjust the screen color. When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function Setup switch so that the arrow indicates ‘White Bal’. Select a desired mode using the Function Setup switch. ※ Select one of the following 5 modes, as a[...]

22_ setup setup SSDR (SAMSUNG SUPER DYNAMIC RANGE) SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas. When the SETUP menu screen is displayed, select ‘SSDR’ by using the Function Setup switch so that the [...]

English_23 ● SETUP o r n d e BLC : Enables a user to directly select a desired area from a picture, and to view the area more clearly. LEVEL : Adjust level of the BLC function. TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced. HLC (High Light Compensation) : This function masks the strong light to minimize white out due to over exposure and[...]

24_ setup setup SSNR3 This function reduces the background noise in a low luminance environments. When the SETUP menu screen is displayed, select 'SSNR3' by using the Function Setup switch so that the arrow indicates 'SSNR3' . Select a desired mode using the Function Setup switch. OFF : Deactivates SSNR3 so that noise is not red[...]

English_25 ● SETUP e l COLOR : The picture is always displayed in color. B/W : The picture is always displayed in black and white. You can turn on or off the burst signal on B/W mode. IR LED Mode : On: 12EA, Off: 6EA IR Mode : When IR LED is turned on in B/W, the objects can be clearly identifi ed due to the function that decreases screen satura[...]

26_ setup setup SPECIAL When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. Select a desired mode using the Function Setup switch. IMAGE ADJ : 1) When the SPECIAL menu screen is displayed, select ‘IMAGE ADJ’ by using the Function Setup switch so that the arr[...]

English_27 ● SETUP d If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear. Monitor : Please change the settings value of video appropriate to your monitor. LCD : Please select this menu item when using an LCD monitor. You can change the gamma, PED level and color gain in the sub menus. CRT : Please se[...]

28_ setup setup When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one. Only English is available in the mode. If you move the cursor to CLR and press the Function Setup switch, all the letters are deleted. To edit a letter, change the cursor to the bottom left arrow and press the Function Setup[...]

English_29 ● SETUP o u . n Y . d . w , e PRIVACY : Mask an area you want to hide on the screen. ➊ When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates ‘PRIVACY’. ➋ Set up the mode using the Function Setup switch. AREA : You can select up to 12 PRIVACY areas. MODE : Determines whether to us[...]

30_ setup setup EXIT Select a desired EXIT mode using the Function Setup switch depending on the camera purpose. SAVE : Save the current settings and exit the MAIN SETUP menu. NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu. RESET : Resets the camera settings to the factory defaults. Language and Monitor settings are not in[...]

English_31 ● TROUBLESHOOTING troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. PROBLEM SOLUTION Nothing appears on the screen. ▶ Check that the power cord and line connection between the camera and m[...]

32_ specifi cations SPECIFICATIONS SCD-2080RN SCD-2080RP Video Imaging Device 1/3” Super HAD CCD II Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Scanning System 2:1 Interlace Synchronization Internal Frequency H : 15.734KHz V:59.94Hz H: 15.625KHz V: 50.Hz Horizontal Resolution Color : 600 TV lines[...]

English_33 ● SPECIFICATIONS e SCD-2080RN SCD-2080RP SSDR On / Off (Level adjustable) Backlight Compensation BLC / HLC / OFF Camera Title Off / On (Displayed 15 characters) Day & Night Auto (ICR) / Color / B/W Backlight Compensation BLC / HLC / Off Contrast Enhancement SSDR (Off / On) Digital Noise Reduction SSNR3 ( Off/On ) Digital Image Stab[...]

34_ specifi cations specifications DIMENSION 92.7mm Ø97mm Ø90mm Ø115.8 mm[...]

MEMO[...]

MEMO[...]

MEMO[...]

MEMO[...]

MEMO[...]

P/NO. : Z6 8 061562 02 A www.samsungtechwin.com www.samsungsecurity.com SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN EUROPE LTD. Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey[...]