Pelco CM6800E-48X8 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Pelco CM6800E-48X8. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Pelco CM6800E-48X8 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Pelco CM6800E-48X8 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Pelco CM6800E-48X8, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Pelco CM6800E-48X8 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Pelco CM6800E-48X8
- nombre de fabricante y año de fabricación del dispositivo Pelco CM6800E-48X8
- condiciones de uso, configuración y mantenimiento del dispositivo Pelco CM6800E-48X8
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Pelco CM6800E-48X8 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Pelco CM6800E-48X8 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Pelco en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Pelco CM6800E-48X8, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Pelco CM6800E-48X8, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Pelco CM6800E-48X8. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    CM6800E-48X8 Matrix Switcher/Controller C1528M-F (6/05) ® INST ALLA TION/OPERA TION[...]

  • Página 2

    2 C1528M-F (6/05) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND W ARNINGS .............................................................................................. .................................................................... 7 DESCRIPTION ................................................................................................[...]

  • Página 3

    C1528M-F (6/05) 3 OPERA TION ........................................................................................................................................................................................................................ 65 OVERVIEW ............................................................................................[...]

  • Página 4

    4 C1528M-F (6/05) LIST OF ILLUSTRA TIONS Figure Page 1 Sample CM6800E-48X8 System .................................................................................................... .................................................................. 8 2 Sample CM6800E 96 x 16 System ..................................................................[...]

  • Página 5

    C1528M-F (6/05) 5 59 CM9760-MGR Comms Page ........................................................................................................ .................................................................... 85 60 CM9760-MGR Cameras Page ...................................................................................................... [...]

  • Página 6

    6 C1528M-F (6/05)[...]

  • Página 7

    C1528M-F (6/05) 7 This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and mainte- nance instructions in the literature accompanying this unit. CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. IMPORT ANT SAFEGUARDS AND W ARNINGS 1. Read,[...]

  • Página 8

    8 C1528M-F (6/05) Figure 1. Sample CM6800E-48X8 System DESCRIPTION Pelco’ s CM6800E Matrix Switcher/Controller is a cross-point video matrix switcher . The CM6800E-48X8 provides switching and cont r ol for 48 video inputs and eight monitor outputs from any one of up to 18 keyboards, PCs, and other devices. All 48 video inputs can be used to view [...]

  • Página 9

    C1528M-F (6/05) 9 CM6800E-48X8 MAIN UNIT CAMERA 1 CAMERA 48 ALARM 9 ALARM 16 CAMERA 49 CAMERA 96 REL2064 (ADDITIONAL RELAYS) ALM2064 (ADDITIONAL ALARMS) CM6800E-48X8 EXPANSION UNIT DATA CABLE VIDEO RIBBON CABLE ALARM 1 ALARM 8 PTZ CONTRO L MONITOR 1 MONITOR 8 MONITOR 9 MONITOR 16 ALL KEYBOARDS CONNECT TO MAIN UNIT PTZ CONTROL GENEX MULTIPLEXER REMO[...]

  • Página 10

    10 C1528M-F (6/05) Programming The CM6800E features easy programming through on-screen menus or the Windows ® -based CM6800-MGR software package. All programming is password-protected. Programming menus are provided in English, French, German, Italian, Polish, Portuguese, Russian, and Spanish. Keyboards Up to 16 keyboards from the KBD100/200A/300A[...]

  • Página 11

    C1528M-F (6/05) 11 Alarm Inputs Eight internal alarm inputs are provided on the rear panel of the matrix switcher/controller . These internal alarm inputs are programmable to associate any camera to any input. A 96 x 16 system provides 16 internal alarm inputs (eight on each CM6800E-48X8 unit). Up to four ALM2064 Alarm Interface Units can be connec[...]

  • Página 12

    12 C1528M-F (6/05) MODELS CM6800E-48X8 Matrix switcher/controller with 48 video inputs and 8 monitor outputs, NTSC-configured, 120/230 V , 50/60 Hz, autoranging (UL; cUL; FCC, Class B) CM6800E-48X8-X Matrix switcher/controller with 48 video inputs and 8 monitor outputs, P AL-configured, 120/230 V , 50/60 Hz, autoranging (CE, Class B) CM6800-96X16 E[...]

  • Página 13

    C1528M-F (6/05) 13 Figure 4. Installing Rack Ears 3. Use supplied pan head screws and washers to mount the CM6800E in a standard 19-inch (48.26 cm) equipment rack or wood or sheet metal screws to mount against a flat surface, according to your installation requirements. Figure 5. Mounting the CM6800E Matrix Switcher/Controller POSITION BRACKETS FOR[...]

  • Página 14

    14 C1528M-F (6/05) VIDEO SOURCES The CM6800E offers 48 full-function video inputs which support Coaxitron PTZ control and video loss detection. Forty video inputs, labeled 1 through 40, can be used for looping video connections with terminating and unterminating switches on the back panel. The eight alternate source inputs, labeled 41 through 48, a[...]

  • Página 15

    C1528M-F (6/05) 15 2. On video inputs 1 through 40, set the terminating switches according to your system requirements. V ideo inputs 41 through 48 cannot be used for loop-through connections. Te r minating switches are used to terminate or unterminate the video input. The factory default has the switches set in the terminated (75-ohm) position. If[...]

  • Página 16

    16 C1528M-F (6/05) CONTROL LINES Y ou cannot connect a Coaxitron camera to the PTZ-A or PTZ-B ports. If your video sources are all controlled by Coaxitron, skip this section. Connect camera control lines to receivers. If any of your video sources are using D or P protocol via RS-422 communications, they will connect at the PTZ-A and PTZ-B connector[...]

  • Página 17

    C1528M-F (6/05) 17 MONITORS The CM6800E supports eight monitors. 1. Install monitors according to the instructions provided with them. 2. Connect the monitor cables at the appropriate video output BNC receptacles on the back of the CM6800E. 3. T erminate cables at the monitors. If you are looping to other devices, terminate only at the last device.[...]

  • Página 18

    18 C1528M-F (6/05) ALARMS The CM6800E provides numerous alarm handling options. Refer to the Programming section for a detailed description. 1. Connect wires from the sensors to the respective alarm input points on the connectors at the back of the CM6800E. Each sensor requires two wires – one wire to the alarm input terminal and a return wire to[...]

  • Página 19

    C1528M-F (6/05) 19 CONNECTING DEVICES THROUGH THE COMMUNICA TION PORTS The CM6800E Matrix Switcher/Controller provides eight communication ports on the rear panel for connecting peripheral components. Instructions are provided in this section for the most commonly used connections. NOTE: Connection instructions for other peripheral devices, such as[...]

  • Página 20

    20 C1528M-F (6/05) Table B. Communication Port Devices and Wiring (Continued) Port Input T ype Wiring Pin-Outs Default Device Programmable to Other Device(s) 7 RJ-45 RS-485 or RS-232 RS-485 Pin-Outs: ASCII device CM9760-MDA, Satellite, 1 Rx+ keyboards (KBD100/200A/300A) 2 Rx- 5 Ground 7 Tx- 8 Tx+ RS-232 Pin-Outs: 1R x 5 Ground 8T x 8 RJ-45 RS-485 o[...]

  • Página 21

    C1528M-F (6/05) 21 Figure 13. CM6800E Communication Port Connections and Options 1 2 3 4 5 6 7 8 16 8 7 6 32 31 4 3 2 120/230~ 50/60 HZ 25 WA TTS 123 4 56 78 CONT ROL AT + T - R + R - T + T - R + R - B 1 2 F 3 1 010101 KBD960 NOTE: TOTAL NUMBER OF KBD100/200A/300A SERIES KEYBOARDS CONNECTED TO THE CM6800 CANNOT EXCEED 16 COM 4 GENEX (RS-485) ALSO P[...]

  • Página 22

    22 C1528M-F (6/05) KBD100, KBD200A, AND KBD300A SERIES KEYBOARDS Y ou can connect up to eight KBD100/200A/300A Series keyboards to any of the following ports: • COM 5 (1 direct-powered keyboard or up to 8 remotely connected keyboards) • COM 6 (1 direct-powered keyboard or up to 8 remotely connected keyboards) • COM 7 (up to 8 remotely connect[...]

  • Página 23

    C1528M-F (6/05) 23 3. Set the keyboard DIP switches for the desired address for the local keyboard (refer to Figure 12 and T able D). Table D. Keyboard Addresses: KBD100/200A/300A Series Keyboards Keyboard Address Switch Settings 1234 10 OFF OFF OFF OFF 21 O N OFF OFF OFF 32 OFF ON OFF OFF 43 O N ON OFF OFF 54 OFF OFF ON OFF 65 O N OFF ON OFF 76 OF[...]

  • Página 24

    24 C1528M-F (6/05) KBD100, KBD200A, and KBD300A: Remote Keyboards Use COM 5, 6, 7, or 8 for remote keyboard connections. Each port can support up to eight KBD100/200A/300A Series keyboards. Do not exceed a total capacity of 16 keyboards connected to the CM6800E. NOTE: A KBDKIT or KBDKIT -X is required to connect remote keyboards. The KBDKIT(-X) con[...]

  • Página 25

    C1528M-F (6/05) 25 M DEVICES (KBD960, ALM2064, REL2064) M protocol devices (KBD960/KBR960 keyboards, ALM2064 Alarm Interface Units, and REL2064 Relay Interface Units) can be connected to COM 3 on the CM6800E. If only one device is to be connected to COM 3, use the instructions for that device in the following sections. If more than one device is to[...]

  • Página 26

    26 C1528M-F (6/05) Connecting a Single KBD960/KBR960 Keyboard To connect a single KBD960/KBR960 Keyboard to the CM6800E: 1. Connect the keyboard to the CM9505UPS using the straight cable supplied with the keyboard. 2. Connect the CM9505UPS to COM 3 on the CM6800E using the 6-foot (1.8 m) straight data cable supplied with the CM6800E. NOTE: After co[...]

  • Página 27

    C1528M-F (6/05) 27 Connecting a Single ALM2064 Alarm Interface Unit To connect a single ALM2064 Alarm Interface Unit: 1. Connect the ALM2064 OUT port to COM 3 on the CM6800E using the 6-foot (1.8 m) straight data cable supplied with the CM6800E. 2. Set SW2, DIP switches 1-8 to the appropriate positions for the local address (default address setting[...]

  • Página 28

    28 C1528M-F (6/05) Connecting a Single REL2064 Relay Interface Unit To connect a single REL2064 Relay Interface Unit: 1. Connect the REL2064 OUT port to COM 3 on the CM6800E using the 6-foot (1.8 m) straight data cable supplied with the CM6800E. 2. Set SW2, DIP switches 1-8 to the appropriate positions for the local address (default address setting[...]

  • Página 29

    C1528M-F (6/05) 29 Multiple M Devices Multiple M devices (KBD960/KBR960, ALM2064, and REL2064) can be connected to COM 3 on the CM6800E, either as local devices or remote devices (when connecting two KBD960/KBR960 keyboards to the CM6800E, you must use a remote connection). Multiple M Devices: Local Connection 1. If you are connecting a KBD960/KBR9[...]

  • Página 30

    30 C1528M-F (6/05) Multiple M Devices: Remote Connection Use a remote connection when the distance from the CM6800E is greater than 6-feet (1.8 m). 1. Connect each ALM2064 and REL2064 unit to a wall block with a 6-foot (1.8 m) straight cable (supplied with the CM6800E). Y ou can connect a maximum of four ALM2064 units and four REL2064 units to the [...]

  • Página 31

    C1528M-F (6/05) 31 CONNECTING A PC The CM6800E provides PC-based setup and programming software that facilitates complete switcher programming and configuration. Refer to the CM6800-MGR Quick Start Guide for instructions on using the software. Connect a PC to the CM6800E to access the CM6800-MGR software or to download upgrades to the software. Y o[...]

  • Página 32

    32 C1528M-F (6/05) CONNECTING GENEX MUL TIPLEXERS Use COM 4 to connect up to eight Genex Multiplexers to the CM6800E. 1. Connect the COM IN port of the multiplexer to COM 4 on the CM6800E, using the 6-foot (1.8 m) reversed data cable supplied with the CM6800E. One reversed cable and four straight cables are supplied with the CM6800E. Use the revers[...]

  • Página 33

    C1528M-F (6/05) 33 LOCAL AUXILIARIES The CM6800E provides three local auxiliary (AUX) outputs on the rear panel for controlling VCRs, printers, and other devices. These outputs can be activated directly from a keyboard by using the F1, F2, and F3 function keys, or they can be activated by an alarm (determined by programming). Both relay contacts an[...]

  • Página 34

    34 C1528M-F (6/05) Connecting the Open Collector Output – F3 (TTL) F3 is a TTL open collector output. This output provides a path to ground to control the low voltage trigger input on many devices. It can control higher voltage control inputs via isolation relays. Refer to Figure 27 for wiring details. Do not exceed the voltage and current rating[...]

  • Página 35

    C1528M-F (6/05) 35 CONNECTING A 96 X 16 SYSTEM 1. Install each CM6800E-48X8 unit and connect appropriate devices to each unit. Note that the CM6800E-48X8 expansion unit must be installed within three feet of the CM6800E-48X8 main unit. NOTE : If you expand a 48 x 8 system to a 96 x 16 system, you must verify that each CM6800E-48X8 unit contains the[...]

  • Página 36

    36 C1528M-F (6/05) Figure 29. CM6800E Time/Date Stamp on Monitor The time stamp will be advancing in one-second increments. Wait five seconds before proceeding. INITIALIZE KEYBOARDS Specify a monitor for each keyboard after your first power -up or any time power is cycled to the keyboard or the CM6800E. Always allow five seconds to elapse before sp[...]

  • Página 37

    C1528M-F (6/05) 37 CONFIGURE THE SYSTEM The CM6800E is shipped from the factory with default programming settings. If the defaults are acceptable, the CM6800E can be operated without any user programming. However , you may want to program the following basic system settings: •T ime and date. • Camera titles: by default, each camera is titled ?[...]

  • Página 38

    38 C1528M-F (6/05) 96 X 16 SYSTEM SETTINGS When you connect two CM6800E-48X8 units together in a 96 x 16 system, you must access the System programming screen and change the setting to 96 x 16. Refer to the Programming section for instructions. KBD960/KBR960 KEYBOARD Configure the KBD960/KBR960 settings. 1. Set DIP switch 2 to the ON position. 2. E[...]

  • Página 39

    C1528M-F (6/05) 39 MONITOR COLOR ADJUSTMENT : Once you have connected all devices and powered the system, use the CM6800E color bars as a reference tool for adjusting the color on each monitor . 1. Enter 9999. 2. Press the CAM key . Broadcast quality color bars appear on the monitor . 3. Adjust color on each monitor as necessary until the color bar[...]

  • Página 40

    40 C1528M-F (6/05) PROGRAMMING THE CM6800E The CM6800E is shipped from the factory with default programming settings. If the defaults are acceptable, the CM6800E can be operated without any user programming. However , you may want to program the following basic system settings: •T ime and date • Camera titles • PTZ control via hardwire data c[...]

  • Página 41

    C1528M-F (6/05) 41 CM6800E PROGRAMMING MODE 1. If you have not already done so, select the monitor (KBD960/KBR960: if the Camera menu appears, press to exit). 2. Press the PGM key (or select PGM on the KBD960/KBR960). The Password screen appears. Note that on the KBD960/KBR960 you must first select and DEF . Then enter the Define PIN (Default: 1234[...]

  • Página 42

    42 C1528M-F (6/05) KBD100/200A/300A Keyboards ENTRIES IN PROGRAMMING MODE During programming, a menu appears on the monitor screen. The currently selected field blinks. Use the following keys or joystick on your keyboard to navigate the programming screens. Function Navigate programming screens. PRE V NEXT MACR O HOLD KBD200A Use the Pan/T ilt posi[...]

  • Página 43

    C1528M-F (6/05) 43 Function Scroll through options in programming fields. F1 F2 Keyboard KBD100/200A/300A Use F1 and F2. Or (KBD300A only) use the joystick to navigate left or right. NOTE: The joystick does not scroll options in all fields. KBD960/KBR960 Select the or icons or use the joystick to navigate left or right. NOTE: The joystick does not [...]

  • Página 44

    44 C1528M-F (6/05) ACCESS The CM6800E supports the following ways to restrict switching system access: Keyboard to Monitor: Restrict a keyboard from accessing selected monitors. Camera to Keyboard: Restrict a keyboard from calling selected cameras to monitors. Or video viewing only: permit the viewing of selected cameras while preventing pan and ti[...]

  • Página 45

    C1528M-F (6/05) 45 ALARM PROGRAMMING Alarmed cameras can be displayed on one or several monitors as part of one or several alarm groups (each monitor can display only one alarm group). Before programming alarm settings note the following precautions: •V erify that no automated system functions are set to run, such as a macro that would arm or dis[...]

  • Página 46

    46 C1528M-F (6/05) PROGRAM AN INTERNAL OR EXTERNAL ALARM CONT ACT Use the Alarm Contact screens to configure alarm inputs. When an alarm is triggered, the logical alarm number , the alarm icon, and the alarm letter (“I” for internal; “E” for external) appear on monitors programmed through the Alarm Group screen to display the alarm. Figure [...]

  • Página 47

    C1528M-F (6/05) 47 3. In the STP matrix, configure up to eight steps to be triggered as a result of this alarm. a. In the CAM field select a camera (use the logical camera number) to be displayed on a system monitor . b. In the DWL field, enter the amount of time the camera view is displayed in an alarm sequence; enter a dwell time between 1 and 99[...]

  • Página 48

    48 C1528M-F (6/05) PROGRAM A VIDEO LOSS ALARM Use the Video Loss screen to program the CM6800 to detect video loss from any camera input and indicate the loss through alar m mode – the logical alarm number , the alarm icon, and a “V” (for video loss) appear on system monitors as specified by alarm group assignment. Figure 36. Program Video Lo[...]

  • Página 49

    C1528M-F (6/05) 49 Assign a Logical Alarm Number (Optional) Each CM6800E alarm type (internal, external, and video loss) has been assigned a series of default logical alarm numbers, which start at 001 and continue sequentially . Depending on how you use the CM6800E system, the default logical alarm numbers could create a numbering conflict, as desc[...]

  • Página 50

    50 C1528M-F (6/05) AUXILIARY OUTPUTS The three local auxiliary (AUX) outputs on the rear panel of the CM6800E can be operated manually from a system keyboard or automati- cally in response to an alarm. Figure 38. Program Auxiliary Outputs Latching or Momentary Operation In the MODE field for each auxiliary , select either LA T or MOM. Alarm-based O[...]

  • Página 51

    C1528M-F (6/05) 51 CAMERA PROGRAMMING Extended Coaxitron protocol receivers can be operated without any programming changes, other than changing the camera title, if necessary . For other receiver control protocols, you must select the control type for the device connected to each video input. If necessary , first program logical camera number . PR[...]

  • Página 52

    52 C1528M-F (6/05) PELCO SWITCHER MODEL CM6800E MAIN MENU 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CAMERA LOGICAL CAMERA MONITOR ACCESS TIME & DATE PORT PRIORITY SEQUENCE MACRO ALARM CONTACTS EVENT TIMER SET AUXILIARY SET PASSWORD SYSTEM ABOUT CM6800E ENGLISH RETURN CAMERA 0001 VERTICAL DRIVE: CONTROL: PORT ADDRESS: CAMERA TITLE CAM 1 SELECT CHARACT[...]

  • Página 53

    C1528M-F (6/05) 53 4. Select the camera title. This title (up to 20 characters) appears on the monitor during real-time camera display . a. Navigate to the position in the camera title that you want to change. b. Use F1 and F2 to scroll through the camera title characters; once you reach the desired character for that position, navigate to the next[...]

  • Página 54

    54 C1528M-F (6/05) EVENT TIMERS Y ou can automate system operation to activate sequences or macros on specific monitors. Events can be scheduled on a daily or weekly basis, or on a specific date such as a holiday . If you set more than one timer to start at the same time, the timers will run in the following order of precedence: weekly , special, d[...]

  • Página 55

    C1528M-F (6/05) 55 MACROS Macros simplify operator control by grouping multiple functions into a single command. Figure 42. Macro Screen MACRO: Select the macro number you want to program. STP: Each macro can include up to 72 steps. For each step select entries for the following fields as necessary: CMD: Select a command. In addition, enter a valid[...]

  • Página 56

    56 C1528M-F (6/05) MONITOR DISPLA Y Use the Monitor screen to adjust monitor display settings for your system. Y ou can adjust settings for the current monitor only (CURRENT) or for all system monitors (ALL). PELCO SWITCHER MODEL CM6800E MAIN MENU 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CAMERA LOGICAL CAMERA MONITOR ACCESS TIME & DATE PORT PRIORITY[...]

  • Página 57

    C1528M-F (6/05) 57 MON/ALM NUMBER: Enable (ON) or disable (OFF) on-screen display of the monitor/alarm number . During normal operation, the monitor number appears in this field. The monitor number is a fixed number , representing an actual BNC output on the rear panel of the CM6800E. When an alarm is active, the logical alarm number appears in thi[...]

  • Página 58

    58 C1528M-F (6/05) PASSWORD Use the Set Password screen to change the system password. If you change the password and then forget the new one, you will have to reset the system to the factory defaults. All system program- ming will be lost. Pelco recommends uploading your programming settings to the CM6800-MGR before changing the password. This all[...]

  • Página 59

    C1528M-F (6/05) 59 PORTS (SERIAL/COM PORTS) Use the Port screen to configure the settings for each device connected to a Serial/COM port on the rear panel of the CM6800E. Figure 46. Port Screen 1. Select the number of the desired Serial Port/COM port (01-10). The serial port numbers correspond to the communication ports on the CM6800E rear panel as[...]

  • Página 60

    60 C1528M-F (6/05) PRIORITY The CM6800E provides eight levels of priority control. Each level defines the ability of a keyboard to control a pan/tilt/zoom (camera positioning system) and to access programming screens. Priority level applies system wide; a keyboard assigned priority level 2 on COM port 8 has a higher priority than a keyboard assigne[...]

  • Página 61

    C1528M-F (6/05) 61 PELCO SWITCHER MODEL CM6800E MAIN MENU 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CAMERA LOGICAL CAMERA MONITOR ACCESS TIME & DATE PORT PRIORITY SEQUENCE MACRO ALARM CONTACTS EVENT TIMER SET AUXILIARY SET PASSWORD SYSTEM ABOUT CM6800E ENGLISH RETURN SYSTEM 96X16 RETURN YOU SWITCHED TO: 96X16 IF YOU CONTINUE, SYSTEM WILL ERASE USER P[...]

  • Página 62

    62 C1528M-F (6/05) SEQUENCES The CM6800E provides two types of sequences: • An operator can program a scratchpad sequence from an individual monitor , without accessing password-protected programming screens. • System sequences are password-protected and can run on any system monitor . Figure 49. Sequence Screen Figure 50. Scratchpad Sequence S[...]

  • Página 63

    C1528M-F (6/05) 63 AUX and ##: Select an auxiliary to be activated. Global =internal and external auxiliaries. OPTIONS: GON = turn global auxiliary on GOFF = turn global auxiliary off CON = turn camera auxiliary on COFF = turn camera auxiliary off NOTE: Activate the auxiliaries on the rear panel of the CM6800E by selecting global auxiliary numbers [...]

  • Página 64

    64 C1528M-F (6/05) TIME AND DA TE Use the T ime and Date screen to set the system time and date settings. The time and date displayed on the monitor during real-time camera display is the time set in the memory through this screen. The system time and date information is kept current in battery-backed RAM. New time and date information will be set [...]

  • Página 65

    C1528M-F (6/05) 65 OPERA TION OVERVIEW A brief description of CM6800E operation is provided here. Refer to the following sections for detailed instructions and options. Install the CM6800E and connect all system devices. Refer to the Installation section. Power -up the system. Refer to the System Start-up section. Switch monitor . 1. Enter the moni[...]

  • Página 66

    66 C1528M-F (6/05) CONTROL RECEIVERS Select a suitable camera and operate a PTZ function. A keyboard with “view-only” access can view the signal from the specified camera but cannot control the camera. Extended Coaxitron protocol receivers can be operated without any programming changes. Other receiver control protocols require programming chan[...]

  • Página 67

    C1528M-F (6/05) 67 OPERA TE SEQUENCES Y ou can run a scratchpad sequence from an individual monitor or a system sequence on any monitor accessible from the keyboard. When running a sequence, any cameras not accessible to the keyboard will be bypassed. A sequence runs continuously until a system operator selects a different camera, or an event timer[...]

  • Página 68

    68 C1528M-F (6/05) RUN A MACRO A macro runs until the last step is completed (unless you specify a loop in the macro). KBD100/200A/300A KEYBOARDS Run a Macro 1. Enter the macro number . 2. Press the MACRO key . Stop a Macro 1. Enter the number of the running macro. 2. Press the MACRO key . NOTE: Any macro or sequence started by this macro will cont[...]

  • Página 69

    C1528M-F (6/05) 69 ACKNOWLEDGE AN ALARM When an alarm is triggered, an alarm icon appears on the monitors programmed to show that alarm. KBD100/200A/300A KEYBOARDS 1. Enter the monitor number . 2. Press the MON key . 3. Press the ACK key . The alarm is removed from the selected monitor . 4. Repeat for each alarm. KBD960/KBR960 KEYBOARDS 1. Select .[...]

  • Página 70

    70 C1528M-F (6/05) CREA TE AND RUN A P A TTERN Patterns are not available with the KBD100 keyboard. KBD960/KBR960 KEYBOARDS Refer to the KBD960 Keyboard Installation/Operation manual for instructions on creating a pattern. 1. Select PRST to display the Preset Menu. 2. Select to start a pattern. OR 1. Select PRST to display the Preset Menu. 2. Enter[...]

  • Página 71

    C1528M-F (6/05) 71 OPERA TE AUXILIARIES/RELA YS Local auxiliaries are the outputs on the rear panel of the CM6800E. External auxiliaries are available by connecting an REL2064 Relay Interface Unit to the CM6800E through COM port 3. Operate a Local Auxiliary KBD100/200A/300A KEYBOARDS KBD960/KBR960 KEYBOARDS Auxiliary 1 relay: Press F1 to activate/d[...]

  • Página 72

    72 C1528M-F (6/05) CONTROL GENEX MUL TIPLEXER AND GENEX MUL TIPLEXER DISPLA YS Multiplexer control is not available with the KBD100. KBD200A/300A KEYBOARDS 1. Enter the number of the multiplexer input. 2. Press the CAM key . 3. Press the SHIFT key . When the SHIFT LED is lit, the keyboard can be used to operate the following Genex multiplexer funct[...]

  • Página 73

    C1528M-F (6/05) 73 Figure 52. CM6800E DIP Switches – Factory Default Settings Table G. CM6800E DIP Switch Settings CM6800E DIP Switch Default Setting Switch 1 OFF (0) = NTSC CM6800E-48X8: OFF ON (1) = P AL CM6800E-48X8-X: ON Switch 2 RESERVED – must be in the OFF position for proper operation OFF Switch 3 RESERVED – must be in the OFF positio[...]

  • Página 74

    74 C1528M-F (6/05) ALARM GROUP DISPLA Y OPTIONS To display on a monitor , an alarm must be assigned to an alarm group (A-H). Before programming alarms you may want to determine the alarm display format for each alarm group. An alarm can include up to eight steps, so eight camera views could display as a part of each alarm. A priority alarm appears [...]

  • Página 75

    C1528M-F (6/05) 75 REVERSE CHRONOLOGICAL PAIR: M AND L The most recent alarm of a specific group is displayed on one designated monitor , while all other alarms in the group are sequenced on the second designated monitor . All steps programmed for the alarm contact appear on the designated monitor . Example: Four alarms set to display on monitors 0[...]

  • Página 76

    76 C1528M-F (6/05) MACRO COMMANDS T able H provides a description of each macro command and the additional fields required for each command. Refer to the Macro section for instructions on programming macros. Table H. Macro Commands Command Description Specify Field(s) GON Activate an auxiliary . Auxiliary Command # GOFF T urn off an auxiliary . Aux[...]

  • Página 77

    C1528M-F (6/05) 77 T able H. Macro Commands (Continued) Command Description Specify Field(s) PIPO T urn off multiplexer picture-in-picture view . Multiplexer input Camera Monitor Monitor QUAD Display multiplexer four -camera mode. Camera group* Command # Multiplexer input Camera Monitor Monitor NANO Display multiplexer nine-camera mode. Camera grou[...]

  • Página 78

    78 C1528M-F (6/05) USING THE CM6800E-48X8 AS A SA TELLITE DEVICE IN A 9700 SYSTEM The CM6800E-48X8 can function as a remote satellite switcher in a 9700 System (a “9700 System” is any matrix system using a CM9700-CC1; the CM9740/9760 systems are also supported). Y ou can view and control up to 96 video inputs on the CM6800 either locally (from [...]

  • Página 79

    C1528M-F (6/05) 79 Figure 53. Data and Tie Line Connections Between CM6800E-48X8 and CM9700/CM9740/CM9760 4. After completing system installation and power -up, select the appropriate CM6800E satellite settings in programming mode. In addition, you must configure satellite settings in the CM9700/CM9740/CM9760 system. Refer to the following section.[...]

  • Página 80

    80 C1528M-F (6/05) PELCO SWITCHER MODEL CM6800E MAIN MENU 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CAMERA LOGICAL CAMERA MONITOR ACCESS TIME & DATE PORT PRIORITY SEQUENCE MACRO ALARM CONTACTS EVENT TIMER SET AUXILIARY SET PASSWORD SYSTEM ABOUT CM6800E ENGLISH RETURN ACCESS 1 KEYBOARD TO MONITOR 2 CAMERA TO KEYBOARD 3 CAMERA TO MONITOR 4 SATELLITE VI[...]

  • Página 81

    C1528M-F (6/05) 81 PELCO SWITCHER MODEL CM6800E MAIN MENU 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CAMERA LOGICAL CAMERA MONITOR ACCESS TIME & DATE PORT PRIORITY SEQUENCE MACRO ALARM CONTACTS EVENT TIMER SET AUXILIARY SET PASSWORD SYSTEM ABOUT CM6800E ENGLISH RETURN SET SERIAL PORT 07 DEVICE: TYPE: BAUD RA TE: P ARITY : DA T A BITS: STOP BITS: REPOR[...]

  • Página 82

    82 C1528M-F (6/05) PELCO SWITCHER MODEL CM6800E MAIN MENU 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CAMERA LOGICAL CAMERA MONITOR ACCESS TIME & DATE PORT PRIORITY SEQUENCE MACRO ALARM CONTACTS EVENT TIMER SET AUXILIARY SET PASSWORD SYSTEM ABOUT CM6800E ENGLISH RETURN ALARM CONT ACTS 1 INTERNAL CONT ACT 2 EXTERNAL CONT ACT 3 VIDEO LOSS 4 ALARM GROUP 5[...]

  • Página 83

    C1528M-F (6/05) 83 CONFIGURE CM9700-MGR SYSTEM MANAGER SETTINGS Instructions for configuring the CM6800-E-48X8 as a satellite device with the CM9700-MGR System Manager software are provided here. If you are using the CM9760-MGR System Manager software, refer to the Configure CM9760-MGR System Manager Settings section. To add a satellite device to a[...]

  • Página 84

    84 C1528M-F (6/05) CONFIGURE CM9760-MGR SYSTEM MANAGER SETTINGS Instructions for configuring the CM6800-E-48X8 as a satellite device with the CM9760-MGR System Manager software are provided here. If you are using the CM9700-MGR System Manager software, refer to the Configure CM9700-MGR System Manager Settings section. To control the CM6800E-48X8 as[...]

  • Página 85

    C1528M-F (6/05) 85 Program the Comms File 1. Click the Comms tab. The Comms page appears. Figure 59. CM9760-MGR Comms Page 2. In the list of Defined Ports, select the Sercom controller port used for connecting the CM6800E-48X8. 3. Click the arrow on the equipment number field, and then select the CM6800E equipment number . • If the CM9760-MGR sof[...]

  • Página 86

    86 C1528M-F (6/05) Program the Cameras File 1. Click the Cameras tab. The Cameras page appears. Figure 59. CM9760-MGR Cameras Page Complete the following steps for each CM6800E-48X8 tie line: 2. In the list of Defined Cameras, click the Physical Number (the number of the CM9760-MXB port used for connecting the tie line from the CM6800E-48X8). 3. En[...]

  • Página 87

    C1528M-F (6/05) 87 LINK CAMERAS T AB LINK CAMERA NUMBER LOGICAL NUMBER DESCRIPTION CC1 PORT NUMBER CAMERA PORT ADDRESS (6800 PHYSICAL CAMERA NUMBER) OPERA TOR ACCESS Program the Link Cameras File 1. Click the Link Cameras tab. The Link Cameras page appears. Figure 60. CM9760-MGR Link Cameras Page Complete the following steps for each CM6800E-48X8 c[...]

  • Página 88

    88 C1528M-F (6/05) Figure 62 . Alarm Camera Switches Dialog Box Program the Alarms File (Optional) 1. Click the Alarms tab. The Alarms page appears. Figure 61. CM9760-MGR Alarms Page Complete the following steps for each CM6800E-48X8 alarm: 2. In the list of Defined Alarms, click the Physical Number . This number must match the CM6800E Logical Alar[...]

  • Página 89

    C1528M-F (6/05) 89 NA VIGA TE WITH THE CM9740/CM9760 KEYBOARD When using the CM6800E as a satellite device in a CM9740/CM9760 system, you can navigate the CM6800E programming screens from the following keyboards: •a local keyboard connected to the CM6800E-48X8 – either a KBD100/200A/300A Series keyboard or a KBD960/KBR960 Series keyboard; navig[...]

  • Página 90

    90 C1528M-F (6/05) LOGICAL NUMBER ASSIGNMENT T ABLE – FOR LINK CAMERAS Link Camera Name Link Camera Number in the Physical Camera Number on CM9740/CM9760-CC1 CM9740/CM9760 System the CM6800E-48X8 Port Number (Link Camera page: “Phy Num” (Link Camera page: “Port Addr” field) (Link Camera page: column) “Port Num” field)[...]

  • Página 91

    C1528M-F (6/05) 91 ASCII OPERA TING COMMANDS ASCII protocol uses the ASCII character set to transmit and receive commands between an ASCII device (such as a personal computer or ASCII keyboard) and the CM6800E. The ASCII protocol communicates in a standard asynchronous, byte-oriented protocol that includes: 1 start bit, 8 data bits, 1 parity bit (o[...]

  • Página 92

    92 C1528M-F (6/05) Table J. ASCII Commands Number ranges are enclosed in brackets – do not enter the brackets. When you control a fixed speed pan and tilt, omit the speed information. NOTE: In a 96 x 16 system the numbers for cameras, monitors, alarms, and relays can be doubled. Desired Action Select monitor Select camera Next camera Previous cam[...]

  • Página 93

    C1528M-F (6/05) 93 Table J. ASCII Commands (Continued) Command [1-8])a 1@a 2@a ~@a [1-256]xa [1-256]~xa [1-8]Aa [1-8]Ba [1-64]Sa [1-64]Ha [1-9999]Ia [1-8]Jia [1-256]Jea [1-48]Jva [1-8]~Jia [1-256]~Jea [1-48]~Jva #Ea #Ia #Ka #Ea #Ia #Ka [1-9999]#m im um om xm ym dLm dRm dUm dDm [1-48]Y a[string]!a va ZaMM/DD/YY/HH: MM:Ssa Result Ends the zone progra[...]

  • Página 94

    94 C1528M-F (6/05) TROUBLESHOOTING GAINING INITIAL CONTROL If you are having problems gaining control of your system for the first time: • Confirm that all system equipment is plugged in and has power . • Confirm that each keyboard and peripheral device in your system has a unique local address. Refer to the Switch Settings section in the appro[...]

  • Página 95

    C1528M-F (6/05) 95 1 2 3 4 5 6 7 8 16 8 7 6 32 31 4 3 2 120/230~ 50/60 HZ 25 WA TTS 123 4 567 8 CONTROL AT + T - R + R - T + T - R + R - B 1 2 F 3 1 010101 DIP SWITCH COVER PLATE Figure 64. Dip Switch Cover Plate Figure 65. CM6800E DIP Switch 7 SOFTWARE RESET Pelco strongly recommends uploading system settings to the CM6800E- MGR before the softwar[...]

  • Página 96

    96 C1528M-F (6/05) SOLUTIONS TO COMMON PROBLEMS Refer to T able K for a list of common problems and their solutions. Table K. Solutions To Common Problems Problem CM6800E does not have power . Y ou can see some cameras and not others from your location. The CM6800E does not respond to keyboard commands. Pressing the PGM key displays a P on the keyb[...]

  • Página 97

    C1528M-F (6/05) 97 KBD960/KBR960 ICON/BUTTON LEGEND Figure 66. Icon/Button Legend MUX CAMERA CONTROL SEQUENCE MENU MUX MENU SEQ MUX FORW ARD RUN BACKWARD MACRO RECALL/AL TERNA TE PRESET/LOCK FUNCTION CONTROLS IRIS CONTROLS IN/OUT NEAR/F AR OPEN/CLOSE OTHER CONTROLS CAMERA MONITOR TURBO ESCAPE LOG OFF CAMERA SELECTION MONITOR SELECTION CAMERA PRESET[...]

  • Página 98

    98 C1528M-F (6/05) UPGRADE THE CM6800 SWITCHER SOFTW ARE When you expand a CM6800E-48X8 system to a 96 x 16 system, verify that all system software is up-to-date and in the appropriate configuration. CM6800E-48X8 software includes both the CM6800E-48X8 switcher software and the CM6800- MGR software. VERIFY THA T EACH CM6800E-48X8 UNIT CONT AINS THE[...]

  • Página 99

    C1528M-F (6/05) 99 GLOSSARY Te rm Definition Access The CM6800E allows you to restrict system control by (1) limiting the monitors or cameras a keyboard can access, or (2) limiting the cameras that can be viewed on a monitor . Alarm display format The CM6800E Matrix Switcher provides four formats for displaying alarmed cameras on system monitors: B[...]

  • Página 100

    100 C1528M-F (6/05) Macro A sequence of commands or steps. Macros can be operated automatically or manually . Automatic operation can be based on specific times or dates (set through the Event T imer). Matrix switcher This is also known as a cross-point switcher . The cross-points are actually electronic switches that select any video input onto an[...]

  • Página 101

    C1528M-F (6/05) 101 RS-422 This is an Electronics Industry Association (EIA) interface standard. Pelco uses this standard for communication from a controller to one or more camera receivers (on the same line); the maximum recommended distance is 4,000 feet (1,219 m). The four -wire connection provides two wires for transmit and two wires for receiv[...]

  • Página 102

    102 C1528M-F (6/05) SPECIFICA TIONS GENERAL Memory Protection: Lithium battery , five years of data protection Keyboards: Eighteen: Sixteen KBD100/200A/300A Series keyboards and two KBD960/KBR960 Series keyboards. (Switcher can provide power for two KBD100/200A/300A Series keyboards. Additional keyboards will require a remote power supply .) Receiv[...]

  • Página 103

    C1528M-F (6/05) 103 REGULA TORY NOTICES 48 x 8 System In a 48 x 8 system, this equipment complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference th at may cause undesired operat[...]

  • Página 104

    104 C1528M-F (6/05) REVISION HISTORY Manual # Date Comments C1528M 11/02 Original version. C1528M-A 3/03 Updated to describe revised satellite functionality (at the 3.01 software level). C1528M-B 4/03 Software updated to 3.02 level. C1528M-C 5/03 Software updated to 3.03 level; revised report alarms description; added instructions on updating switc[...]

  • Página 105

    C1528M-F (6/05) 105[...]

  • Página 106

    W orldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco.com ISO 9001 ® United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East[...]