Panasonic WJ-HD220 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Panasonic WJ-HD220. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Panasonic WJ-HD220 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Panasonic WJ-HD220 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Panasonic WJ-HD220, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Panasonic WJ-HD220 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Panasonic WJ-HD220
- nombre de fabricante y año de fabricación del dispositivo Panasonic WJ-HD220
- condiciones de uso, configuración y mantenimiento del dispositivo Panasonic WJ-HD220
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Panasonic WJ-HD220 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Panasonic WJ-HD220 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Panasonic en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Panasonic WJ-HD220, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Panasonic WJ-HD220, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Panasonic WJ-HD220. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    Digital Disk Recorder Operating Instructions Model No. WJ-HD220 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. 4 8 3 7 2 6 1 5 OPERA TE ALARM SUSPEND RESET HDD FULL ERROR OSD DST M U L T IS C R E E N S E L E C T ZOOM TIMER REMOTE LOCK S E Q U E C E A L A R M S E R [...]

  • Página 2

    2 The serial number of this product may be found on the bot- tom of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. WJ-HD220 Serial No. Caution: Before attempting to connect or operate this product, pleas[...]

  • Página 3

    3 IMPORT ANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sourc[...]

  • Página 4

    4 CONTENTS IMPORTANT SAFETY INSTRUCTIONS ............................ 3 PREFACE .......................................................................... 5 FEATURES ........................................................................ 5 PRECAUTIONS ................................................................. 6 MAJOR OPERATING CONTROLS AND [...]

  • Página 5

    5 PREF ACE The Digital Disk Recorder WJ-HD220 is designed for use within a surveillance system and is a combination of a hard disk recorder and an 8-input video multiplexer. It records nearly 8 600 hours of picture and audio data selectively on a field basis with fine quality (FQ). Besides recording and playback, the WJ-HD220 features versatile int[...]

  • Página 6

    6 PRECAUTIONS • Refer all work related to the installation of this product to qualified service personnel or system installers. • Prevent condensation from forming on the surface of the hard disk. Wait until the dew evaporates in any of the following cases. The recorder is moved to a place significantly differ- ent in temperature or humidity. T[...]

  • Página 7

    7 MAJOR OPERA TING CONTROLS AND THEIR FUNCTIONS ■ Front V iew OPERA TE ALARM SUSPEND RESET HDD FULL ERROR OSD MUL TISCREEN SELECT ZOOM TIMER DST REMOTE LOCK SEQUENCE ALARM SERCH STOP PLA Y MODE SELECT SETUP /ESC PLA Y TIME&DA TE SEARCH REC STOP SPOT MUL TI CAMERA SELECT ALARM RECALL REC PUSH — P AUSE SET Digital Disk Recorder WJ-HD220 1 5 2[...]

  • Página 8

    8 Orange: The input is not displayed on the monitor, but is recorded on the hard disk. Blink Yellow: The input channel has an activated alarm and is in alarm recording mode. Blink Green: The input channel has an activated alarm but it is not recorded. These buttons are used for password input to release the button lock function. !3 Multiscreen Sele[...]

  • Página 9

    9 While opening the time and date search window (TIME&DATE SEARCH): Pressing the JogDial moves the cursor to the next position in the window. Rotating the JogDial increases or decreases the parameter. After specifying the date and time, press the [PLAY] button to start playback. When operating alarm recall (ALARM RECALL): Holding down the JogDi[...]

  • Página 10

    10 SIGNAL GND POWER DA T A 10/100BASE-T MODE RS-232C MUL TI SCREEN OUT SPOT OUT 1 1 ALARM/REMOTE OFF ON 2 2 3 3 4 4 5 5 6 6 7 7 8 8 OUT VIDEO OUT AUDIO IN IN #1 #3 #0 #2 #4 #6 #9 $0 #5 #7 #8 $1 $2 $3 $4 ■ Rear V iew #0 Audio Input Connector (AUDIO IN) An RCA standard jack that accepts an unbalanced –10 dBV, 10 k Ω line input audio signal supp[...]

  • Página 11

    11 INST ALLA TION ● W arning This installation should be made by qualified service personnel or system installers. ● Notes Places to avoid • Direct exposure to sunlight or near a source of heat such as a radiator. • Very dirty and dusty places. Places subject to strong vibrations. • Near a transformer, dimmer, video player, radio or monit[...]

  • Página 12

    12 ■ Mounting in the Rack 1. Remove the four rubber feet by removing the five screws on the bottom of the unit. 2. Place the rack mounting brackets on both sides of the unit and tighten with the six supplied screws (M3 x10). 3. Install the unit with the rack mounting brackets in the rack by using four screws (not included). Remove 5 rubber feet. [...]

  • Página 13

    13 CONNECTIONS & DIP SW SETTING System Composition & Connections Three system compositions are introduced depending on the camera type and other peripherals connected. <Basic System> Ordinary system-cameras are connected in combination with the multiscreen and spot monitors, microphone, and speakers. Note: Be sure to set DATA to OFF i[...]

  • Página 14

    14 <PS • Data System> Cameras equipped with data multiplex function are connected in combination with the system controllers and multiplex unit compatible with PS • Data. Note: Set DATA to ON in the CAMERA SYSTEM SETUP menu when connecting combination cameras to VIDEO IN 1-4. SIGNAL GND POWER DA T A 10/100BASE-T MODE RS-232C MUL TI SCREEN[...]

  • Página 15

    15 SIGNAL GND POWER D ATA 10/100BASE-T MODE RS-232C MUL TI SCREEN OUT SPOT OUT 1 1 ALARM/REMOTE OFF ON 2 2 3 3 4 4 5 5 6 6 7 7 8 8 OUT VIDEO OUT AUDIO IN IN AC 120 V 60 Hz POWER ON OFF ALARM Data Multiplex Unit WJ-MP204 ALARM SUSPEND Combination Cameras Pan/Tilt Table Receiver Data Multiplex Unit Hub/Router PC (Internet Browser) PC (Internet Browse[...]

  • Página 16

    16 ■ Connection with the Camera Site ● System Camera Connection Connect system cameras to VIDEO IN 5-8. ● Data-multiplex Camera Connection Connect combination cameras directly to VIDEO IN 1-4. When connecting to VIDEO IN 5-8, use a Data Multiplex Unit as shown below. ■ Connection with the Monitors Connect the spot and multiscreen monitors. [...]

  • Página 17

    17 Notes: • Input rating: Low-active, non-voltage normally open (N.O.) contact • Output rating for pin #4 Alarm Recovery Out *1 : High-active with a 200 Ω resistor pulled up to +5 V • Output rating for pin #7 Alarm Out 2 *2 : High-active with a 4.7 k Ω resistor pulled up to +12 V • Output rating for pin #6 Alarm Out 1: Low-active, maxim[...]

  • Página 18

    18 ■ Serial Port Connections ● RS-232C Connection A 9-pin connector is provided with the recorder to communicate with the PC via the RS-232C interface. ● PS • Data Connection Note the following when connecting the recorder with PS • Data devices. 1. Place the recorder in the middle of the chain when the System Controller and other devices[...]

  • Página 19

    19 <Case 2> Exclusively with System Controller <Case 3> With other system devices except System Controller ● 10/100BASE-T Port Connection The PC controls the WJ-HD220 via Ethernet. Hub Personal Computer LAN Hub Digital Disk Recorder SIGNAL GND POWER DATA 10/100BASE-T MODE RS-232C MUL TI SCREEN OUT SPOT OUT 1 1 ALARM/REMOTE OFF ON 2 2 [...]

  • Página 20

    20 DIP Switch Setting The 6-bit DIP switch is used as follows. #1 through #4: System mode setup #5 and #6: DATA port termination ■ System Mode ■ DA T A Port T ermination Termination switch positions depend on the system compo- sition. MODE 1 2 3 4 5 6 ON Termination 2 Termination 1 System Mode Setup MODE 1 2 3 4 5 6 ON MODE 1 2 3 4 5 6 ON Switc[...]

  • Página 21

    21 SETUP PROCEDURES ■ Prior to Setup ● T urning On the Power 1. Plug the power cord into the AC outlet. 2. Turn on the power switch on the rear panel. The oper- ate LED lights up. An HDD check and a system check will be carried out while displaying respective mes- sages. Power-on recording will start if TIMER has been set to EXT in the SYSTEM S[...]

  • Página 22

    22 ● Displaying WJ-HD220 (MAIN MENU) 1. Confirm that the camera and peripherals are connected correctly and securely. 2. Turn on the power switches of all system components. 3. Hold down the [STOP] button for 2 seconds. The WJ- HD220 MAIN MENU appears. ● Buttons and Dials Used for Setup [ D up] button: Moves the cursor upwards in a menu, and op[...]

  • Página 23

    23 ● Menu T ree The figure shows the hierarchy of menu windows. WJ-HD220 MAIN MENU TIME ADJUST SETUP VMD SETUP SERIAL PORT SETUP SEQUENCE SETUP CAMERA VIEW SETUP SYSTEM LOG CAMERA SYSTEM SETUP VMD AREA SETUP MUL TI SEQ SETUP SPOT SEQ SETUP SYSTEM SETUP CAMERA TITLE DISPLA Y SETUP EXT REC SETUP REC SETUP TIMER REC (Assignment) PROG1 SETUP (T ime Z[...]

  • Página 24

    24 ■ Initializing You can initialize all disk contents including image data and/or setup data. ● Initializing All Contents & Setup Data Warning! The following are irrevocable procedures. We strongly recommend that you copy important pic- tures from the hard disk. 1. Press the [REC STOP] button or [STOP] button to stop recording or playback.[...]

  • Página 25

    25 ■ Main Menu (WJ-HD220 MAIN MENU) The main menu is located at the top of the menu tree from where every menu window starts. 1. Hold down the [SETUP/ESC] button for 2 seconds. The main menu appears. 2. Select a setup menu you wish to program using the [ D ] or [ C ] button, and press the [SET] (JogDial). The selected setup menu opens. The follow[...]

  • Página 26

    26 Set 00:00 for the start time of the initial event of the next day. • A combination camera will move to the preset posi- tion if an alarm arises and the position has been assigned beforehand in TRIGGER ACTION SETUP of the REC SETUP menu. 4. Press the JogDial while the cursor is on SET O to open the event programming menu. ● Recording Mode Set[...]

  • Página 27

    27 ● Post-alarm Recording (POST ALM REC) This setting specifies the duration of alarm recording after an alarm input. Functions active during alarm recording are buzzer beeping, ALARM LED indication, "ALARM" status display, and the ALARM OUT signal. 1. Move the cursor to POST ALARM REC with the [ D ] or [ C ] button. 2. Select the desir[...]

  • Página 28

    28 3. Select the parameter with the JogDial, and press the JogDial. The default is REC. REC: The channel is recorded in alarm recording, timer recording and manual recording mode. ALM-ONLY: The channel is recorded only when the alarm operates. 4. Repeat steps 2 and 3 until all channels are set. 5. Press the [SETUP/ESC] button to return to the PROG1[...]

  • Página 29

    29 2. Press the JogDial (SET) to validate the selection. 3. Press the [ D ] or [ C ] button to select the next item, or press the [SETUP/ESC] button to quit the display setup. Notes: • When a 9-split screen is displayed, only TYPE1 24H is available. • If “ TIME&DATE EMB. ” is set to ON and a display type except OFF is selected, the type[...]

  • Página 30

    ● Remote LED (REMOTE LED) The remote LED on the front panel will indicate or ignore the remote controlled status of the recorder via the network. 1. Select either ON or OFF with the JogDial. The default is OFF. ON: REMOTE LED turns on when the network controls the recorder. OFF: REMOTE LED is deactivated. 2. Press the JogDial (SET) to validate th[...]

  • Página 31

    31 ● Camera Title (CAMERA TITLE) Camera title and display position are specified for each camera. 1. In the DISPLAY SETUP menu, move the cursor to CAM- ERA TITLE O , and press the JogDial to open the CAM- ERA TITLE menu. 2. Move the cursor to the camera you wish to program using the [ D ] or [ C ] button. 3. Select either ON or OFF with the JogDi[...]

  • Página 32

    32 ● Password Lock Setup (P ASSWORD LOCK) A five-digit password is entered to protect all settings, recorded pictures, and operating status against erroneous operation and tampering. Settings alone can be also pro- tected from unauthorized access. While the LOCK indicator on the front panel is on, a message "NOW KEY LOCKED!" is displaye[...]

  • Página 33

    33 ● Simultaneous Recording & Playback (SIMUL REC&PLA Y) This setting specifies whether to allow simultaneous play- back and recording. 1. Move the cursor to SIMUL REC&PLAY with the [ D ] or [ C ] button. 2. Select on or off with the JogDial, and press the JogDial. The default is ON. ON: Allows simultaneous recording and playback incl[...]

  • Página 34

    34 ● Disk End Buzzer (DISK END BUZZ) The buzzer can be set up to beep at the point where the disk is full (remaining space 0 %). The setting is available only when STOP is set for DISK END MODE. 1. Move the cursor to DISK END BUZZ with the [ D ] or [ C ] button. 2. Rotate the JogDial to select the desired parameter. The default is ON. ON: Enables[...]

  • Página 35

    Notes: • The number of days includes today as 1 day, there- fore 2DAYS covers today and yesterday. • Auto erasing is implemented at 24:00 midnight. Playback will stop once when the time reaches 24:00, then will restart with a different portion based on the renewed day count. ● Resolution (RESOLUTION) Notes: • We recommend that you perform t[...]

  • Página 36

    36 ● HDD Safety Mode (HDD SAFETY MODE) A hard disk drive can be damaged if it is moved and shocked while its motor is revolving. This menu is provided for HDD protection purposes and enables you to stop the motors from starting even when the recorder is being pow- ered. Use this when you cannot switch off the recorder and you have to mount or dis[...]

  • Página 37

    37 ■ Alarm Setup (ALARM SETUP) The digital disk recorder accepts alarm signals supplied from connected devices such as sensors or camera site equipment. The recorder itself also generates an alarm sig- nal when the preset motion detection is activated. Any alarm signal starts recording with the preset recording mode, field rate, and picture quali[...]

  • Página 38

    38 Notes: • Areas adjacent to the time and date display will be excluded from VMD when TIME&DATE EMB is set to ON. Set it to OFF when you need to include these areas. • VMD should be used when the input to the unit is from an ordinary camera. Select [OFF] to avoid use- less VMD when a video multiplexer or combination camera supplies the inp[...]

  • Página 39

    39 PS • DATA: Select when the communication chain uses the PS • DATA protocol. This selection enables the DATA terminal on the rear panel for communication. RS-232C: Select when a protocol other than PS • DATA is used. This selection enables the RS-232C terminal on the rear panel for communication. Note: Parallel use of the DATA and RS-232C t[...]

  • Página 40

    40 ● Alarm Data (ALARM DA T A) (exclusive to PS • DA T A) The recorder pauses before sending a notice to the con- nected system controller when an alarm operates. 1. Move the cursor to ALARM DATA with the [ D ] or [ C ] button. 2. Select the parameter with the JogDial, and press the JogDial. The default is 1S. OFF: Select this when no system co[...]

  • Página 41

    41 ● HTTP Port (HTTP PORT) Set an HTTP port number. The default is 80. Available port numbers: From 00000 to 65535, except the "well-known port" numbers assigned by IANA (Internet Assigned Numbers Authority) ● Dynamic Host Configuration Protocol (DHCP) Dynamic Host Configuration Protocol is enabled or dis- abled. The default is OFF. N[...]

  • Página 42

    42 ● Multiscreen Sequence Setup (MUL TI SEQ SETUP) Open the QUAD SEQ SETUP menu to program the sequence steps for displaying quad-split and single input images. 1. Move the cursor to the desired step using the [ D ] or [ C ] button. 2. Select a camera number with the JogDial, and press the JogDial. The default camera number is identical to the st[...]

  • Página 43

    43 1. Move the cursor to the desired camera using the [ D ] or [ C ] button. 2. Select ON or OFF with the JogDial, and press the JogDial. The default is ON. ON: Live image of the channel is displayed. OFF: Blackout image is displayed. 3. Repeat steps 1 and 2 until all channels are pro- grammed, or press the [SETUP/ESC] button to return to the SWITC[...]

  • Página 44

    44 ■ Language (LANGUAGE) Language selection is available for display on the multi- screen monitor and for HTML on the browser. 1. Move the cursor to LANGUAGE. 2. Select a language with the JogDial and press the JogDial. The default is ENGLISH. Available languages: ENGLISH, FRENCH, GERMAN, ITALIAN, SPANISH, RUSSIAN, CHINESE Notes: • When Russian[...]

  • Página 45

    45 OPERA TING PROCEDURES Controlling V ideo Inputs & Monitors Operations on the front panel can control video inputs on the spot monitor or multiscreen monitor. ■ On the Spot Monitor ● Selecting the Spot Monitor 1. Press the [SPOT/MULTI] button to turn the LED in the button on. The spot monitor is ready to be operated. 2. Follow the descrip[...]

  • Página 46

    46 ■ On the Multiscreen Monitor ● Selecting the Multiscreen Monitor 1. Press the [SPOT/MULTI] button to turn the LED in the button off. The multiscreen monitor is ready to be oper- ated. 2. Follow the descriptions below for each monitoring mode on the multiscreen monitor. ● Viewing a Single Live The multiscreen monitor can display a single li[...]

  • Página 47

    47 ● Connected Alarm Sensors A maximum of eight sensors can be connected to the termi- nals on the rear panel. Sensors may be installed in such places as parking lots or reception desks where cars and visitors come and go. ● Built-in Motion Detector The recorder detects motion for each of the eight video inputs, based on certain changes in the [...]

  • Página 48

    48 ● Monitor Display There are two monitoring modes, alarm associated (SPOT) mode and alarm ignore (OFF) mode, depending on the selection for MONITOR MODE in the ALARM SETUP menu. Typical cases are described below for each setup. Alarm Associated Mode • The image of the alarmed input is displayed on the mul- tiscreen monitor in single spot mode[...]

  • Página 49

    49 ● Auto Reset The activated alarm event is reset when the AUTO RESET time has elapsed, or the lost video has been recovered. The ALARM indicator changes from blinking to a steady light. ● External Reset The activated alarm event except video motion detection, is reset when the recorder receives an external reset signal from the connected devi[...]

  • Página 50

    50 Recording Notes: • When SIMUL REC&PLAY (simultaneous recording and playback) is set to OFF in the setup, any recording will stop playback and start the recording. Playback is unavailable while recording. • When set to ON, recording is available while playing back. • The recording rate will degrade to 15 FPS while display- ing a quad sp[...]

  • Página 51

    51 Orange: The channel image is not displayed. Yellow: The channel image is displayed. The multiscreen monitor displays the recording images while the corresponding input indicators on the front panel light in yellow. 2. Hold down the [REC STOP] button for 2 seconds to stop recording. The REC indicator turns off. ■ Alarm Recording Alarm recording[...]

  • Página 52

    52 3. Rotate the JogDial clockwise to move forward in the recorded data or counter-clockwise to move backward. The more turns you rotate the JogDial, the faster the skip speed will be. 4. Press the [STOP] button to stop playback. ■ Step Playback A minute search is made for a desired picture field by field. 1. Press the [PLAY] button to start play[...]

  • Página 53

    53 6. Repeat from step 1 to search for another time and date or press the [TIME&DATE SEARCH] button to cancel the function. Pressing the [STOP] button will also end the searching. Note: Searching may take the recorder 18 seconds at worst ■ Multiscreen Playback You can view a multiple playback image displayed in 4-split or 9-split pattern on t[...]

  • Página 54

    54 Lock/Unlock Buttons ■ Password V erification When a locked button is pressed, the key locked warning appears on the monitor for 2 seconds, then it changes to the password prompt. 1. Enter your five-digit password using the [CAM SELECT] buttons (1-8). The buzzer shortly beeps once, and the entered digit changes from " – " to " [...]

  • Página 55

    55 WJ-HD220 NETWORK OPERA TION[...]

  • Página 56

    56 ■ System Requirements Your personal computer must meet the following minimum requirements. OS: One of the following operating systems: Windows98 Second Edition Windows2000 Windows Millennium Edition WindowsXP Professional or Home Edition Browser: One of the following browser software: Microsoft Internet Explorer 5.5SP2, 6.0 Note: The Netscape [...]

  • Página 57

    57 ■ Connection System connection examples are shown. <Direct Connection with a PC> • Connection with a Client PC via Hub <System Expansion> A maximum of four PCs can access the recorder at a time. WV- CL920 Digital Disk Recorder Camera Personal Computer Ethernet Cross Cable OPERATE ALARM SUSPEND RESET HDD FULL ERROR OSD MULTISCREEN[...]

  • Página 58

    58 ■ Main Page and Control Panel Start your PC WWW browser. Type http://192.168.0.10/ (or the IP Address set for WJ-HD220) / in the URL ( U niform R esource L ocators) space. The browser displays the Main Control Panel of the WJ- HD220 homepage as shown in the figure. Notes: • Specify "http//:192.168.0.10/" when a client PC is con- ne[...]

  • Página 59

    59 ■ T o Access Setup Menus There are fourteen setup menus to adapt the WJ-HD220 to your requirements. 1. On the Main Control Panel , click the [SETUP MENU] button. The setup menu opens. 2. Click the buttons to open the respective windows. <Main Setup Menu> TIMER SETUP: Specifies the schedule and parameters for timer recordings. REC SETUP: [...]

  • Página 60

    60 ● Program Assignment (TIMER REC) When internal timer (INT) is selected, programs can be assigned on a weekly and/or daily basis. Assignable programs: PROG1 – PROG4, OFF ● Programming (PROGRAM SETUP) There are four programs, each containing four events hav- ing a start and end time, and a recording mode. 1. Select ON or OFF for each event. [...]

  • Página 61

    61 • Even if preset to 30 or 15 FPS, the actual recording rate may drop to 7.5 FPS at worst while busy multi task such as playback, remote-access playback, remote-access live image, FTP access, multi-split display, or video motion detection are carried out simultaneously. The status display will indicate " * → PLAY" while playing back[...]

  • Página 62

    62 ■ Camera Recording Setup (REC CAMERA SETUP) Click CAMERA REC SETUP in the system setup window to open the menu. This menu is provided for the purpose of saving disk space. Each camera channel can be recorded only when an alarm operates, while it will not be recorded in non-alarm status. ALARM-ONLY: Records the camera channel only when the alar[...]

  • Página 63

    63 TYPE2 12H: Time and date are displayed in two lines in the AM-PM system. OFF: Time & date display is disabled. 8 Time and Date Position (TIME&DATE POSITION) Right-Lower: Displays time & date in the lower right corner. Right-Upper: Displays time & date in the upper right corner. Left-Lower: Displays time & date in the lower le[...]

  • Página 64

    64 ■ Camera T itle (CAMERA TITLE) 8 On/Off (ON/OFF) ON: Displays the camera title. OFF: Hides the camera title. 8 Title (TITLE) Usable characters: Are shown in the window. Number of digits: 5 digits maximum. 8 Title Position (POSITION) Right-Lower: Displays the title in the lower right corner. Right-Upper: Displays the title in the upper right co[...]

  • Página 65

    65 Note: The recording rate may be sacrificed in the fol- lowing cases. • Recording and playback/FTP access are carried out simultaneously. • A multi-split screen is displayed. • VMD (video motion detection) is enabled. • A PC accesses the live images via the network. 8 Alteration Detection (ALTER DETECT) You can enable or disable the addit[...]

  • Página 66

    66 ■ V ideo Motion Detector Setup (VMD SETUP) 8 Sensitivity (SENSITIVE) LOW: Low sensitivity MID: Medium sensitivity HIGH: High sensitivity OFF: Motion detection is disabled. Click the [SET] button when all items have been set proper- ly. Click the [SETUP] button to open the area setup window. ■ VMD Area Setup (VMD AREA SETUP) Drag a maximum of[...]

  • Página 67

    67 8 Parity Check (PARITY CHECK) NONE: No parity check EVEN: Even parity ODD: Odd parity 8 Stop Bit (STOP BIT) 1 bit: 1 bit 2 bit: 2 bits 8 Wait Time (WAIT TIME) OFF: Retransmission is disabled. 100 MSEC: 100 m seconds 200 MSEC: 200 m seconds 1 SEC: 1 second 8 Control Unit Addresses (CONTROL UNIT ADDRESS) (only for PS • DATA) Assignable address: [...]

  • Página 68

    68 ■ Camera System Setup (CAMERA SYSTEM SETUP) (only for PS • DA T A) 8 Camera Number (CAMERA No.) The camera number assigned to the port is used when a system controller accesses the camera. Assignable numbers: From 1 to 128, must be unique in the chain. 8 Compensation level (COMPENSATION) Video signal loss can be compensated for the length of[...]

  • Página 69

    69 8 Domain Name Service (DOMAIN NAME SERVICE) OFF: Disables DNS, only IP address usable. MANUAL: Enables DNS. AUTO: Enables DNS. Domain Name (DOMAIN NAME) Enter from the keyboard. DNS Server Address (DNS SERVICE ADDRESS) Enter from the keyboard. 8 Dynamic DNS (DYNAMIC DNS) OFF: Does not use DDNS. ON: Uses DDNS. DDNS Host Name (DDNS HOST NAME) Ente[...]

  • Página 70

    70 ■ Switcher Setup (SWITCHER SETUP) This window specifies sequence setups only for the WJ- HD220. The browser's sequence is set up in LIVE SEQUENCE SETUP on page 77. 8 Common Setup (COMMON SETUP) Multiscreen monitor Start Display (START DISPLAY (MULTI)) Spot monitor Start Display (START DISPLAY (SPOT)) The image in the selected form will be[...]

  • Página 71

    71 ■ Multi Sequence Setup (MUL TI SEQUENCE SETUP) 8 Camera Channel (CAMERA CH) 1 - 8: The selected camera image will be displayed in single spot mode. QUAD 4A: Camera images 1 through 4 will be dis- played in quad-split mode. QUAD 4B: Camera images 5 through 8 will be dis- played in quad-split mode. 8 Time (TIME) Available times: 2-30 S Click the[...]

  • Página 72

    72 ■ System Information (SYSTEM INFORMA TION) 8 HDD Hour Meter (HDD HOUR METER) Each meter shows how many hours the digital hard disk recorder has been operated in playback, recording and idle. The built-in HDD needs replacement when the hour meter reads around 30 000 H. 8 HDD Capacity (HDD CAPACITY) The total usable capacity of the built-in hard[...]

  • Página 73

    73 ■ System Log (SYSTEM LOG) Error causes are abbreviated as shown at the top of the window. ■ Error Information on Network Connections (ERROR INFORMA TION (FTP , SMTP , DDNS)) Up to 100 errors are displayed. The list is updated by dis- carding old records when new events arise. Refer to Appendix ■ Network Error Information for details.[...]

  • Página 74

    74 ■ User Setup (USER SETUP) A maximum of 16 users can be registered. 8 User Authorization (USER AUTHORIZATION) OFF: Allows free access. ON: Verifies the password and access level for a maxi- mum of sixteen users. Click the [SET] button. 8 User Name (USER NAME) Enter from the keyboard. The default is "admin". 8 Password (PASSWORD) Enter[...]

  • Página 75

    75 Interval (INTERVAL) Available times: 1 - 1 440 seconds, 1 - 1 440 min- utes Channel to Send (CHANNEL TO SEND) OFF: Does not send the channel image. ON: Sends the channel image. Click the [SET] button when all items have been set proper- ly. ■ FTP Client Setup (FTP CLIENT SETUP) 8 Basic Setup (BASIC SETUP) Server Address (SERVER ADDRESS) Enter [...]

  • Página 76

    76 ■ Mail Setup (MAIL SETUP) 8 Alarm Mail Setup (ALARM MAIL SETUP) Sending Mail (SEND MAIL) OFF: Does not send. ON: Sends an e-mail to a maximum of four recipi- ents when an alarm operates. Attaching Alarm Image (ATTACH ALARM IMAGE) OFF: Does not attach. ON: Attaches the image of the alarmed channel to the mail. SMTP Server Address (SMTP SERVER A[...]

  • Página 77

    77 ■ Network V ideo Setup (NETWORK VIDEO SETUP) 8 Live & Playback Image Setup (LIVE & PLAY IMAGE SETUP) Video Rate (VIDEO RATE) Applicable rates: FAST, MIDDLE, SLOW, VERY SLOW Click the [SET] button. 8 Live Sequence Setup (LIVE SEQUENCE SETUP) Use Sequence (USE SEQUENCE) OFF: Does not run the sequence. ON: Runs the sequence. Auto Skip (AU[...]

  • Página 78

    78 q Main Control Panel Tab Opens the main control panel. w Alarm List Tab Opens the alarm list. e Network Status Display LIVE, LIVE SEQ, PLAY, REV PLAY, >> (FF), << (REW). PAUSE and AL (playback of alarm record) are dis- played. r Channel Number Display (CH) The channel number of the image is displayed. t System Log Display System erro[...]

  • Página 79

    79 @4 Add Favorite Button (ADD FAVORITE) Registers the IP address (or URL when using DDNS) to the favorite of the browser. @5 Recording Button (REC) Starts recording. @6 Recording Stop Button (REC STOP) Stops recording. o Start Button (START) While playing back, clicking this button will specify the start point for downloading. !0 Start Time Displa[...]

  • Página 80

    80 ■ Main Control Panel 8 Camera Selection Button (Camera Select) Click any of the buttons. The selected camera channel will be displayed in the image area. 8 Multiscreen Selection Button (Multiscreen Select) Clicking the button displays the respective multiscreen. 8 Live Sequence Button (LIVE SEQUENCE) Clicking the [LIVE SEQUENCE] button runs a [...]

  • Página 81

    81 8 Camera Control View Button (CAMERA CONTROL VIEW) The camera control buttons appear on the bottom of the screen when you click the [CAMERA CONTROL VIEW] but- ton. These buttons enable you to adjust images of combi- nation cameras. ZOOM (WIDE/TELE) buttons zoom the image in or out. FOCUS (FAR/NEAR/AUTO) buttons adjust the focus of the image. Whe[...]

  • Página 82

    82 ■ Alarm List Clicking the alarm list tab on the main control panel opens the list. Alarm events are listed with event numbers, dates, channel numbers, and event types. Click a line to play back the recorded image of the event. CH SORT rearranges the listing order to start with the camera channel you specified. The listing will be sorted by dat[...]

  • Página 83

    83 ■ HTTP Download and V iewing Images When accessing the WJ-HD220 from the browser, and the [DOWNLOAD] button is clicked in playback, the image data and viewer software are downloaded as an "exe" file to your PC. Frame No.: Indicates the frame number of the dis- played image. Date: Indicates the date when the image was recorded. Speed:[...]

  • Página 84

    84 Cannot search alarm image in the list Enter a date that is a little older than the one you wish to search. Old image data are overwritten and cannot be searched. Old records were discarded. Specified date may be later. DISK END MODE is set to CONTINUE. Over 9 999 of alarm events arose. Slow image refreshment and/or slow response to operations Re[...]

  • Página 85

    85 SPECIFICA TIONS & APPENDIX[...]

  • Página 86

    86 SPECIFICA TIONS General Power Source Required: 120 V AC, 60 Hz Power Consumption: 45 W Ambient Operating Temperature: +5 ° C - +45 ° C (41 ° F - 113 ° F) Ambient Operating Humidity: Less than 85 % Dimensions: 420 mm (W) x 44 mm (H) x 350 mm (D) 16-9/16" (W) x 3-7/16" (H) x 13-3/4" (D) Weight: 5.2 k g (11.4 lbs.) Input Video In[...]

  • Página 87

    87 ST ANDARD ACCESSORIES Rack Mounting Bracket ............................................................... 2 pcs. Screw for Rack Mounting Bracket (M3x10) ................................. 6 pcs. Absorber ...................................................................................... 4 pcs. Sleeve .........................................[...]

  • Página 88

    88 Item SHIFT SETUP FUNCTION Step playback REW Alarm record playback Setup menu display on/off The top of the oldest record will be accessed. Jump to oldest UP LR UP DOWN R WV-CU360 APPENDIX ■ Remote Control from System Controller A system controller having PS • Data capability can control the WJ-HD220. The table compares operations of the WJ-H[...]

  • Página 89

    89 WJ-HD220 Daylight saving OFF, INT or EXT selectable Item WV-CU360 Note DST SHIFT SETUP FUNCTION 3 1 Timer REC mode SHIFT SETUP FUNCTION SHIFT SETUP FUNCTION 9 1 Button lock off Enter your password. Button lock on SHIFT SETUP FUNCTION 31 SHIFT SETUP FUNCTION 30 Status display on/off OSD LOCK Multiscreen pattern selection Multiscreen monitor MUL T[...]

  • Página 90

    90 ■ RS-232C Communication Protocol The following pages detail the elements for communication between the Digital Disk Recorder and the personal computer. Be sure to select RS-232C for PROTOCOL in the COMMUNICATION SETUP window. For BAUD RATE, DATA BIT and PARITY set- tings, refer to COMMUNICATION SETUP. For cable connection refer to RS-232C CONN[...]

  • Página 91

    91 ● Command T able Basic Operation Item Transmission Command (ASCII) Response (ASCII) Parameter (ASCII) Fast Forward to the end OFF OFF Pause OPA OPA Play OPL OPL Recording ORC ORC Rewind to the top ORW ORW Skip&Play Forward OSF:n OSF n=0F Normal speed n=1F x2 speed n=2F x5 speed n=3F x50 speed n=5F x100 speed n=0S Normal speed n=1S 1/2 spee[...]

  • Página 92

    92 Setup Control Item Transmission Command (ASCII) Response (ASCII) Parameter (ASCII) Cursor Moves DCR:n1n2 DCR n1=A Right n1=C Upward n1=E Left n1=G Downward n2=1 Move a step n2=2 Move multi steps n1n2=PD Move to lower layer n1n2=P+ Move to upper layer n1n2=P- Turn a newer page n1n2=PU Turn an older page Key Lock MKL:n MKL n=0 Lock OFF n=1 Lock ON[...]

  • Página 93

    93 Media Control Item Transmission Command (ASCII) Response (ASCII) Parameter (ASCII) Disk End Notice Setup MDE:n MDE n=0 End is not notified n=1 End is notified Disk End Notice HDE Inquiry Item Transmission Command (ASCII) Response (ASCII) Parameter (ASCII) Remaining Size QHR QHR:nnn nnn=000-100 Decimal % Inquiry ID Inquiry QID QID:WJ-HD220 Key Lo[...]

  • Página 94

    94 ■ HDD Maintenance ● When to Maintain HDD HDD maintenance is required in the following cases. • When FULL indicator lights up • When ERROR indicator lights up • When an optional hard disk is added • When you wish to format the HDD or to remove link • When HDD reaches its life time (around 30 000 hours, displayed in the SYSTEM INFO w[...]

  • Página 95

    95 ● When Error Indicator is Lit Refer to your dealer for servicing when this happens. 8 HDD Check The recorder checks the hard disk when the recorder is turned on, or when the HDD CHECK time specified in the menu setup comes during operation. The recorder warns you of any error detected as fol- lows. Error indicator blinks. Warning Out terminal [...]

  • Página 96

    96 You can implement any of the following operations as necessary. REMOVE LINK: Logically removes the HDD link. HDD FORMAT: Formats the HDD. RESTART: Closes the menu, and restarts the recorder. The menu can also be displayed manually when you need to format the HDD or remove the logical link. 1. Turn off the power of the recorder once, and turn it [...]

  • Página 97

    97 8 Formatting HDD (HDD FORMA T) This command initializes the HDD format and is applic- able to HDDs of *, ERR, or ADD status. Caution: Formatting is an irreversible procedure. We strongly recommend that, before formatting, you either save the recorded data into the server via the network, or you save the data on VCR tapes via the REC OUT terminal[...]

  • Página 98

    98 5. Select YES or NO rotating the JogDial, and press the JogDial. YES: Carries out formatting. Wait until the process ends. When YES is selected, the display will turn to NOW FORMATTING. It will change to HDD FORMAT → SET DONE when formatting is completed. When the [STOP] button is pressed, the window returns to that of step 1. Select RESTART t[...]

  • Página 99

    99 ■ Mail Contents The recorder sends e-mails to the specified addresses when SEND MAIL is set to ON. An e-mail contains the fol- lowing information. ● Alarm Notice Mail A JPEG image file with an HTML file will be sent when specified to attach. WJ-HD220 (Sender IP Address) STATUS REPORT DATE: Jan31.03 00:00:00 PORT: nCH URL: http://Sender IP ad[...]

  • Página 100

    100 ■ Network Security ● WJ-HD220 Security Function Host/User Authentication Access can be limited by setting the authentication function to ON in the menu setup. Note: Be sure to change the password from the default setting "admin" to your own. Changing the HTTP Port Number Changing the port number will limit unauthorized accesses su[...]

  • Página 101

    101 Type POP3 server error SMTP server error Connection error Internal error Message Authentication error (POP3) Cannot connect to POP3 server Connection error to DNS server (Cannot resolve server name) Cannot connect to SMTP server MAIL FROM command error RCPT TO command error Undefined error Details User name or password may be incorrect. Reconfi[...]

  • Página 102

    102 Type DNS server error Connection error Internal error Message Connection error to DNS server (Cannot resolve server name) Cannot connect to DDNS server User name or password incorrect IP address update failed Undefined error Details • Designation for DNS server may be incorrect. Reconfirm DNS settings. • DNS server may malfunction. Ask your[...]

  • Página 103

    Panasonic Canada Inc. 5770 Ambler Drive,Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 http://www.panasonic.ca Panasonic Sales Company Division of Panasonic Puerto Rico Inc. San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina P.R. 00985(809)750-4300 Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North A[...]