Panasonic KX-NCP500 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Panasonic KX-NCP500. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Panasonic KX-NCP500 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Panasonic KX-NCP500 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Panasonic KX-NCP500, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Panasonic KX-NCP500 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Panasonic KX-NCP500
- nombre de fabricante y año de fabricación del dispositivo Panasonic KX-NCP500
- condiciones de uso, configuración y mantenimiento del dispositivo Panasonic KX-NCP500
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Panasonic KX-NCP500 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Panasonic KX-NCP500 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Panasonic en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Panasonic KX-NCP500, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Panasonic KX-NCP500, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Panasonic KX-NCP500. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    Model No. KX-NCP500 KX-NCP1000 Pure IP-PBX Installation Manual Document V ersion: 201 1-10 Thank you for purchasing a Panasonic Pure IP-PBX. Please read this manual carefully before using this product and save this manual for future use. KX-NCP500/KX-NCP1000: PBMPR Software File V ersion 5.0000 or later SD Logo is a trademark of SD-3C, LLC. www.voi[...]

  • Página 2

    System Components System Components Table Category Model No. Description Main Unit KX-NCP500 Main Unit KX-NCP1000 Main Unit Main Processing Card IP Convergence Main Processing Card (IPCMPR) IPCMPR Option Cards KX-NCP1104 4-Channel VoIP DSP Card (DSP4) KX-TDE0110 16-Channel VoIP DSP Card (DSP16) KX-TDE0111 64-Channel VoIP DSP Card (DSP64) KX-TDA0196[...]

  • Página 3

    Category Model No. Description KX-NCS2205 Activation Key for CA PRO for 5 Users (CA Pro 5users) KX-NCS2210 Activation Key for CA PRO for 10 Users (CA Pro 10users) KX-NCS2240 Activation Key for CA PRO for 40 Users (CA Pro 40users) KX-NCS2249 Activation Key for CA PRO for 128 Users (CA Pro 128users) KX-NCS2301 Activation Key for CA ACD Monitor for 1 [...]

  • Página 4

    Category Model No. Description Other Physical Cards KX-TDA0161 4-Port Doorphone Card (DPH4) KX-TDA0164 4-Port External Input/Output Card (EIO4) KX-TDA0166 16-Channel Echo Canceller Card (ECHO16) KX-TDA0191 4-Channel Message Card (MSG4) KX-TDA0194 4-Channel Simplified Voice Message Card (ESVM4) Cell Stations (CSs) 2.4 GHz KX-T0141 2-Channel Cell Sta[...]

  • Página 5

    Note • For the equipment (e.g., Add-on Key Module, USB Module, Headset *1 ) that can be connected to a particular telephone, refer to the telephone's manual. • For other equipment that can be connected to the PBX, refer to "1.1.2 System Connection Diagram". *1 The KX-T7090 headset can be connected to the KX-T7000, KX-T7200, KX-T7[...]

  • Página 6

    Safety Notices Please observe the safety notices in this manual in order to avoid danger to users or other people, and prevent damage to property. The notices are classified as follows, according to the severity of injury or damage: W ARNING This notice means that misuse could result in death or serious injury. CAUTION This notice means that misuse[...]

  • Página 7

    Important Information SA VE THESE INSTRUCTIONS W ARNING SAFETY REQUIREMENTS For All Telephone Equipment • Do not install the product in any other way than described in relevant manuals. • The product must only be installed and serviced by qualified service personnel. The product should be used as-is from the time of purchase; it should not be d[...]

  • Página 8

    e. Do not run any cables under carpeting. • Unplug this unit from the AC outlet if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized Panasonic Factory Service Center. • Do not insert objects of any kind into this product, as they [...]

  • Página 9

    Requirements 1. The SD Memory Card contains software for all the processes of the PBX and all customer data. It can be easily removed and taken away from the PBX by a third party. Therefore, do not allow unauthorized access to prevent data leakage. 2. Always make backups of data stored on the SD Memory Card. For details, refer to "2.6.2 Utilit[...]

  • Página 10

    Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: • Do not use the product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swi[...]

  • Página 11

    Precaution W ARNING DO NOT REMOVE SD MEMOR Y CARD WHILE POWER IS SUPPLIED T O THE PBX Doing so may cause the PBX to fail to start when you try to restart the system. Document Version 2011-10 Installation Manual 11 Precaution[...]

  • Página 12

    Password Security CAUTION To the Administrator or Installer regarding the system password 1. Please provide all system passwords to the customer. 2. To avoid unauthorized access and possible abuse of the PBX, keep the passwords secret, and inform the customer of the importance of the passwords, and the possible dangers if they become known to other[...]

  • Página 13

    Introduction This Installation Manual is designed to serve as an overall technical reference for the Panasonic Pure IP-PBX, KX-NCP500/KX-NCP1000. It provides instructions for installing the hardware, and programming the PBX using the Maintenance Console. The Structure of this Manual This manual contains the following sections: Section 1 System Outl[...]

  • Página 14

    F.C.C. REQUIREMENTS AND RELEVANT INFORMATION 1. Notification to the Telephone Company This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the side of this equipment is a label that contains, among other information, a product identifier in the format US: ACJMF04BKX-NCP500. If requested, this number mus[...]

  • Página 15

    interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment[...]

  • Página 16

    Table of Contents 1 System Outline .. ..................................................................................... 19 1.1 Basic System Construction .. ......................................................................................... 20 1.1.1 Main Unit .. ..............................................................................[...]

  • Página 17

    3.7.5 MSG4 Card (KX-TDA0191) .. .......................................................................................... 86 3.7.6 ESVM4 Card (KX-TDA0194) .. ........................................................................................ 87 3.8 Connection of Extensions .. ...................................................................[...]

  • Página 18

    18 Installation Manual Document Version 2011-10 Table of Contents[...]

  • Página 19

    Section 1 System Outline This section provides general information on the PBX, including the system capacity and specifications. Document Version 2011-10 Installation Manual 19[...]

  • Página 20

    1.1 Basic System Construction 1.1.1 Main Unit The main unit contains a power supply unit (PSU) and an IPCMPR card for starting and controlling the PBX. KX-NCP500 KX-NCP1000 Construction of the Main Unit A. IPCMPR Card A A KX-NCP500 KX-NCP1000 20 Installation Manual Document Version 2011-10 1.1.1 Main Unit[...]

  • Página 21

    1.1.2 System Connection Diagram KX-T7600 KX-T7600 Doorphone & Door Opener BGM/Music On Hold (MOH) Pager/ Speaker Voice Processing System KX-T7636/ KX-T7633 Remote PC PC Printer CO (Telephone Company Lines) Analog/PRI/T1 Pure IP-PBX PC CS PS Wireless Phone Fax Machine PC USB APT DPT Amplifier SLT DSS Console DSS Console External Sensor/ External[...]

  • Página 22

    PRI23 (KX-NCP1290) SLC8 (KX-NCP1173) LCOT4 (KX-NCP1180) DLC16 (KX-NCP1172) DLC8 (KX-NCP1171) DHLC4 (KX-NCP1170) SLC16 (KX-NCP1174) OPB3 (KX-NCP1190) DPH4 (KX-TDA0161) ECHO16 (KX-TDA0166) MSG4 (KX-TDA0191) EIO4 (KX-TDA0164) ESVM4 (KX-TDA0194) DSP4 (KX-NCP1104) DSP16 (KX-TDE0110) DSP64 (KX-TDE0111) RMT (KX-TDA0196) V-IPGW16 V-SIPGW16 IPCMPR (Installe[...]

  • Página 23

    1.2 Optional Equipment 1.2.1 Optional Equipment Model No. Model Name Description KX-NCP1104 4-Channel VoIP DSP Card (DSP4) 4-channel digital signal processor card with a 4-Channel IP Trunk activation key and an 8-Channel IP Proprietary Telephone activation key preinstalled. Compliant with ITU-T G.729A and G.711 codec methods. To be mounted on the I[...]

  • Página 24

    Model No. Model Name Description KX-TDA0196 Remote Card (RMT) Analog modem card for remote communication with the PBX. ITU-T V.90 support. To be mounted on the IPCMPR card. KX-TDE0110 16-Channel VoIP DSP Card (DSP16) 16-channel digital signal processor card with a 4-Channel IP Trunk activation key and an 8-Channel IP Proprietary Telephone activatio[...]

  • Página 25

    1.3 Specifications 1.3.1 General Description Control Bus Original bus (16-bit, 8 MHz, 10 megabytes per second) Communication Bus H.100 bus conformity (1024 time slots) Switching Non-blocking Power Input KX-NCP500 100 V AC to 130 V AC; 1.0 A/200 V AC to 240 V AC; 0.6 A; 50 Hz/60 Hz KX-NCP1000 100 V AC to 130 V AC; 1.3 A/200 V AC to 240 V AC; 0.8 A; [...]

  • Página 26

    Extension Connection Cable SLT 1-pair wire (T, R) DPT 1-pair wire (D1, D2) or 2-pair wire (T, R, D1, D2) APT 2-pair wire (T, R, D1, D2) PT-interface CS (2-channel) 1-pair wire (D1, D2) PT-interface CS (8-channel) 4-pair wire (D1, D2) DSS Console and Add-on Key Module 1-pair wire (D1, D2) Dimension KX-NCP500 430 mm (W) ´ 88 mm (H) ´ 340 mm (D) (17[...]

  • Página 27

    1.3.2 Characteristics Terminal Equipment Loop Limit • PT: KX-DT300/KX-T7600 series DPT: 90 W ; all other DPTs/APTs: 40 W • SLT: 600 W including set • Doorphone: 20 W • CS: 65 W Minimum Leakage Resistance 15 000 W minimum Maximum Number of Extension Instruments per Line 1. for PT or SLT 2. by Parallel or eXtra Device Port connection of an AP[...]

  • Página 28

    1.3.3 System Capacity Type and Maximum Number of Slots The PBX supports the following type and number of slots. Slot Type Maximum Number KX-NCP500 KX-NCP1000 IPCMPR Card Slot 1 1 Regular Free Slot 2 3 Small Free Slot 3 4 Virtual Slot Virtual CO Line Slot 4 4 Virtual Extension Slot 4 4 IPCMPR Card Slot and Free Slots KX-NCP500 KX-NCP1000 A B C B C A[...]

  • Página 29

    Virtual Slots of the IPCMPR Card Example: Virtual Slots of the KX-NCP1000 IPCMPR Card Virtual Slots Virtual CO Line Slots Virtual Extension Slots Document Version 2011-10 Installation Manual 29 1.3.3 System Capacity[...]

  • Página 30

    Maximum Optional Service Cards The following number of cards can be installed in the Free Slots or Virtual Slots of the PBX. Note • Any card that exceeds the capacity of the PBX will be ignored. • When the PBX starts up with an invalid configuration, some cards will be ignored. Cards Installed in Free Slots or Virtual Slots 44 44 44 7 4 22 34 7[...]

  • Página 31

    Cards Mounted on Other Optional Service Cards Card Type Maximum Number Mounted on KX-NCP500 KX-NCP1000 DSP4 1 1 IPCMPR Card DSP16 DSP64 RMT 1 1 DPH4 4 4 OPB3 Card ECHO16 2 *1 2 *1 MSG4 4 4 ESVM4 EIO4 4 4 *1 Only 1 ECHO16 card can be mounted on each OPB3 card. Maximum CO Lines and Extensions The PBX supports the following number of CO lines and exte[...]

  • Página 32

    DSP Card Resources The maximum number of simultaneous calls using IP protocols is determined by the type of call, codec(s) used, and digital signal processor (DSP) card installed in the PBX. Below are some example configurations and the maximum number of simultaneous calls for each. For Calls between Virtual CO Lines and Virtual Extensions Codec(s)[...]

  • Página 33

    Maximum Terminal Equipment The following shows the number of each terminal equipment type supported by the PBX. Terminal Equipment Type Maximum Number Telephone 172 SLT 36 KX-DT300/KX-T7600 series DPT 40 Other DPT 10 APT 4 IP-PT *1 128 *2 SIP Extension 128 DSS console 8 CS 21 *3 PT-interface CS (2-channel) 11 PT-interface CS (8-channel) 5 IP-CS (8-[...]

  • Página 34

    Note for KX-NT265 IP-PT users The supported card varies depending on the software version of your KX-NT265 IP-PT. To confirm the version, follow the procedure below: " AP Version ". Select "Maintenance". Software version is displayed. While starting up Select "Version display". To exit the programming mode PROGRAM SP-P[...]

  • Página 35

    Load Figure Calculation Equipment Type Load Figure PT KX-DT300 series DPT/KX-DT300 series DSS console/KX-T7600 series DPT/KX-T7600 series DSS console 1 Other DPT/Other DSS console 4 APT 4 IP-PT 0 SIP Extension 0 Extension Card *1 DHLC4 4 SLC8 8 SLC16 16 PT-interface CS (2-channel) (1 unit) 4 PT-interface CS (8-channel) (1 unit) 8 IP-CS (8-channel) [...]

  • Página 36

    Lines and Equipment Load Figure Required Card Small Free Slot Regular Free Slot Virtual Slot Extension KX-DT300 series DPT 24 units 28 DHLC4 *1 DLC16 *1 – SLT 16 units 16 SLC16 – KX-NT300 series IP-PT 40 units 0 – – V-IPEXT32 ´ 2 SIP Extension 0 0 – – – VPS 0 0 – – – CS 0 0 – – – *1 At least 4 of the 20 DPT ports of DHLC4[...]

  • Página 37

    Section 2 Activation Key Installation This section describes information on activation keys, including how to obtain an activation key and install it in the SD Memory Card. Document Version 2011-10 Installation Manual 37[...]

  • Página 38

    2.1 Information about the Activation Keys 2.1.1 Activation Keys To use IP CO lines and IP telephones on a private IP network using the IPCMPR card or to upgrade the software for enhanced features, you need the appropriate activation keys. Activation keys are provided via the DSP cards and optional activation key files. Type and Maximum Number of Ac[...]

  • Página 39

    Activation Key Type Description Maximum Number Supported IP CO Lines/IP Telephones/CA Users CA Supervisor 1user Allows the use of CA ACD Monitor for 1 ICD Supervisor. 4 4 users Software Upgrade 01 Upgrades software to use enhanced features. 1 - *1 You need to set the number of the installed activation key to be used for H.323 CO lines through syste[...]

  • Página 40

    Activation Keys for IP Telephones Model No. Activation Key Type Maximum Number/Supported IP Telephones with DSP4/DSP16 with DSP64 KX-NCS3201 1 IP Softphone/IP PT 120 120 IP-PTs/IP softphones 96 96 IP-PTs/IP softphones KX-NCS3204 4 IP Softphone/IP PT 30 120 IP-PTs/IP softphones 24 96 IP-PTs/IP softphones KX-NCS3208 8 IP Softphone/IP PT 15 120 IP-PTs[...]

  • Página 41

    Note • For information about how to obtain the additional activation keys, refer to "2.1.2 Activation Key Code and Key Management System". • For information about how to install the activation key files on the SD Memory Card, refer to "2.1.3 Activation Key File". Document Version 2011-10 Installation Manual 41 2.1.1 Activati[...]

  • Página 42

    Activation Key Installation Example The following shows an example of when using 16 H.323 CO lines, 16 SIP CO lines, 32 IP-PTs, 16 IP softphones, and 16 SIP Extensions on a private IP network using the IPCMPR card. Example: KX-NCP1000 IPCMPR Card 8-Channel IP Proprietary T elephone 8-Channel IP Softphone/ IP Proprietary T elephone SD Memory Card DS[...]

  • Página 43

    2.1.2 Activation Key Code and Key Management System To obtain additional activation keys, you need to purchase the appropriate activation key codes and access the Key Management System. You can download the activation keys as an activation key file from the Key Management System. To download the activation keys, enter the MPR ID number shown on the[...]

  • Página 44

    2.1.3 Activation Key File The corresponding number of IP CO lines and IP telephones or enhanced features can be activated by installing the downloaded activation key file(s) in the SD Memory Card of the IPCMPR card using the Maintenance Console. Installing the Activation Key File in the SD Memory Card Make sure to install the Maintenance Console on[...]

  • Página 45

    Section 3 Installation This section describes the procedures to install the PBX. Detailed instructions for planning the installation site, installing the main unit and optional service cards, and cabling of peripheral equipment are provided. Further information on peripheral equipment installation is included. Document Version 2011-10 Installation [...]

  • Página 46

    3.1 Before Installation 3.1.1 Before Installation Please read the following notes concerning installation and connection before installing the PBX and terminal equipment. Be sure to comply with all applicable laws, regulations, and guidelines. Safety Installation Instructions WARNING When installing telephone wiring, basic safety precautions should[...]

  • Página 47

    • Do not stack up the optional service cards. Wiring Precautions Be sure to follow these instructions when wiring the unit: CAUTION • Avoid using the same AC outlet for computers, telexes, and other office equipment, as noise generated by such equipment may hamper system performance or interrupt the system. • Unplug the system from its power [...]

  • Página 48

    3.2 Installation of the PBX 3.2.1 Unpacking Unpack the box and check the items below: KX-NCP500 KX-NCP1000 Main Unit 1 1 Ferrite Core (for the IPCMPR card) 2 2 AC Cord 1 1 19-inch Rack Attachment Bracket 2 2 SD Memory Card 1 1 Screw 6 6 48 Installation Manual Document Version 2011-10 3.2.1 Unpacking[...]

  • Página 49

    3.2.2 Names and Locations KX-NCP500 AC B DE F G J HI K L Front Back KX-NCP1000 AC B G DE F Front Back L JK HI A. Small Free Slots B. RUN Indicator C. Regular Free Slots D. ALARM Indicator E. IPCMPR Card Slot F. MNT Port G. LAN Port H. Hook Clip I. Power Switch J. AC Inlet K. Ground Terminal L. RS-232C Port Note A Power Supply Unit (PSU) is pre -ins[...]

  • Página 50

    3.2.3 Frame Ground Connection 1. Loosen the screw. 2. Insert a grounding wire (user -supplied). 3. Tighten the screw. 4. Connect the grounding wire to ground. Screw Grounding wire To ground WARNING • Proper grounding (connection to ground) is very important to reduce the risk to the user of electrocution or to protect the PBX from the bad effects[...]

  • Página 51

    3.2.4 Installing/Removing the Optional Service Cards CAUTION • To protect the back board from static electricity, do not touch parts on the back board in the main unit and on the optional service cards. To discharge static electricity, touch ground or wear a grounding strap. • When the label is attached to an optional service card (for small fr[...]

  • Página 52

    3. Turn the 2 screws clockwise to fix the card in place. Screws 4. To remove the card, reverse the procedure above. Note Make sure the screws are tightened to ground the card securely. 52 Installation Manual Document Version 2011-10 3.2.4 Installing/Removing the Optional Service Cards[...]

  • Página 53

    3.2.5 Types of Connectors Connector Type Pin Number Used for RJ45 (Twisted pair cable) 8 1 • IPCMPR • DHLC4 (KX-NCP1170 ) • DLC8 (KX-NCP1171) • DLC16 (KX-NCP1172) • SLC8 (KX-NCP1173) • SLC16 (KX-NCP1174) • LCOT4 (KX-NCP1180) • T1 (KX-NCP1187) • PRI23 (KX-NCP1290) 10-pin T erminal Block 8-pin T erminal Block 81 10 1 • DPH4 (KX-TD[...]

  • Página 54

    3.2.6 Attaching a Ferrite Core A ferrite core must be attached when an RJ45 connector is connected to an IPCMPR card. Wrap the cable once around the ferrite core, then close the case of the ferrite core. Attach the ferrite core 3 cm (1-3/16 in) away from the connector. The ferrite core is included with the PBX. 3 cm (1-3/16 in) 54 Installation Manu[...]

  • Página 55

    3.2.7 19-inch Rack Mounting WARNING • Be careful not to drop any components. Dropping components may damage them or cause an injury. • Only use the 19-inch rack mounting equipment (attachment bracket, screws) included with the PBX. CAUTION • When the PBX is mounted on a 19 -inch rack, make sure that the installation of the unit does not cause[...]

  • Página 56

    3.2.8 Floor Standing When installing the PBX on the floor, make sure to follow these instructions. WARNING Be careful not to drop any components. Dropping components may damage them or cause an injury. CAUTION • Make sure that the PBX is placed as indicated in the diagram below. Do not place it on its side or upside down. • Do not block the ope[...]

  • Página 57

    3.2.9 Surge Protector Installation CAUTION Performing surge protection is essential. Make sure to follow the instructions in this section. Overview A massive electrical surge can be caused if lightning strikes a telephone cable 10 m (33 ft) above ground, or if a telephone line comes into contact with a power line. A surge protector is a device that[...]

  • Página 58

    Outside Installation CO Line CO Line Extn. Surge Protector T erminal Board Surge Protector PBX (Main Building) (Another Building) Extn.: Extension Line Extn. Extn. Ground Extn. SL T PT PT -interface CS CS CS SL T PT PT -interface CS If you install an extension outside of the building, the following precautions are recommended: a. Install the extens[...]

  • Página 59

    1. Connect the ground rod to the surge protector using a grounding wire with a cross-sectional area of at least 1.3 mm 2 . 2. Bury the ground rod near the protector. The grounding wire should be as short as possible. 3. The grounding wire should run straight to the ground rod. Do not run the wire around other objects. 4. Bury the ground rod at leas[...]

  • Página 60

    3.3 Information about the Main Processing Card 3.3.1 IPCMPR Card Function The IPCMPR card is the preinstalled main processing card with built -in ESVM card feature (2-channel). The Virtual Cards (CO line/extension) can be installed in Virtual Slots of the IPCMPR card and can be activated with the activation keys. Also, the IPCMPR supports LAN conne[...]

  • Página 61

    • For details about connecting to a LAN, refer to "3.11 LAN Connection" • For details about connecting peripherals, refer to "3.10.1 Connection of Peripherals" • For details about System Initialize Switch, refer to "3.13.1 Starting the PBX". • For details about Reset Button, refer to "5.1.4 Using the Reset[...]

  • Página 62

    Indication Color Description 10BASE-T/ 100BASE-TX MNT 2 LINK Green Link status indication • OFF: Off -line • ON: Linked normally • Flashing: In communication 100 Yellow Data transmission speed indication • OFF: 10 Mbps • ON: 100 Mbps LAN 1 LINK Green Link status indication • OFF: Off -line • ON: Linked normally • Flashing: In commun[...]

  • Página 63

    3.3.2 DSP4 Card (KX-NCP1104), DSP16 Card (KX-TDE0110), and DSP64 Card (KX-TDE0111 ) Function DSP4: 4-channel digital signal processor card with a 4-Channel IP Trunk activation key and a 8-Channel IP Proprietary Telephone activation key preinstalled. Compliant with ITU-T G. 729A and G.711 codec methods. To be mounted on the IPCMPR card. DSP16: 16-ch[...]

  • Página 64

    • When installing the DSP card, hold down the shaded areas of the card to connect it firmly. 64 Installation Manual Document Version 2011-10 3.3.2 DSP4 Card (KX-NCP1104), DSP16 Card (KX-TDE0110), and DSP64 Card (KX-TDE0111)[...]

  • Página 65

    3.3.3 RMT Card (KX-TDA0196) Function Analog modem card for remote communication with the PBX. ITU -T V.90 support. To be mounted on the IPCMPR card. RMT Card IPCMPR Card Screws inside Accessories and User-supplied Items Accessories (included): Screws ´ 2 User-supplied (not included): none Document Version 2011-10 Installation Manual 65 3.3.3 RMT C[...]

  • Página 66

    3.4 Information about the Virtual Cards 3.4.1 Virtual Cards Function Virtual Cards are included with the IPCMPR card and can be activated with the appropriate activation key (Only V-IPCS4 cards can be activated without activation keys). By installing Virtual Cards in the Virtual Slots of the IPCMPR card using the Maintenance Console, IP CO lines, I[...]

  • Página 67

    3.5 Information about the Physical CO Line Cards 3.5.1 LCOT4 Card (KX-NCP1180) Function 4-port analog CO line card with Caller ID (FSK/DTMF) and 1 power failure transfer (PFT) port. T o CO line RJ45 LED Accessories and User-supplied Items Accessories (included): none User-supplied (not included): RJ45 connector CAUTION To reduce the risk of fire, u[...]

  • Página 68

    LED Indications Indication Color Description CARD STATUS Green/Red Card status indication • OFF: Power Off • Green ON: Normal (all ports are idle) • Green Flashing (60 times per minute): Normal (a port is in use) • Red ON: Fault (includes reset) • Red Flashing (60 times per minute): Out of Service 68 Installation Manual Document Version 2[...]

  • Página 69

    3.5.2 T1 Card (KX-NCP1187) Function 1-port T1 CO line card. EIA/TIA standard compliant. B A RJ45 LEDs T o NT1 Accessories and User-supplied Items Accessories (included): none User-supplied (not included): RJ45 connector CAUTION • Connect this optional service card to the CO line through NT1; do not connect to the CO line directly. • T1 ports ar[...]

  • Página 70

    Pin Assignments RJ45 Connector No. Signal Name Level [V] Function 8 1 1 RX+ (+) Receive data (+) 2 RX- (-) Receive data (-) 3 Reserved – – 4 TX- (-) Transmit data (-) 5 TX+ (+) Transmit data (+) 6-8 Reserved – – LED Indications Indication Color Description CARD STATUS Green/Red Card status indication • OFF: Power Off • Green ON: Normal [...]

  • Página 71

    3.5.3 PRI23 Card (KX-NCP1290) Function 1-port ISDN Primary Rate Interface card (23B channels). NI (North American standard ISDN protocol) compliant. LEDs RJ45 B A T o NT1/ Extension Accessories and User-supplied Items Accessories (included): none User-supplied (not included): RJ45 connector CAUTION • Connecting this optional service card to the C[...]

  • Página 72

    Pin Assignments RJ45 Connector No. Signal Name Level [V] Function 8 1 1 RX+ (+) Receive data (+) 2 RX- (-) Receive data (-) 3 Reserved – – 4 TX- (-) Transmit data (-) 5 TX+ (+) Transmit data (+) 6-8 Reserved – – LED Indications Indication Color Description CARD STATUS Green/Red Card status indication • OFF: Power Off • Green ON: Normal [...]

  • Página 73

    3.6 Information about the Physical Extension Cards 3.6.1 DHLC4 Card (KX-NCP1170 ) Function 4-port digital hybrid extension card for DPTs, APTs, SLTs, DSS consoles, and PT-interface CSs, with Caller ID (FSK) and 1 power failure transfer (PFT) port. RJ45 LED T o extensions Accessories and User-supplied Items Accessories (included): none User-supplied[...]

  • Página 74

    LED Indications Indication Color Description CARD STATUS Green/ Orange/Red Card status indication • OFF: Power Off • Green ON: Normal (all ports are idle) • Green Flashing (60 times per minute): Normal (a port is in use) • Orange Flashing: Detection of PT-interface CS connection (when starting up the PT-interface CS) • Red ON: Fault (incl[...]

  • Página 75

    3.6.2 DLC8 Card (KX-NCP1171) Function 8-port digital extension card for DPTs, DSS consoles, and PT -interface CSs. RJ45 LED T o extensions Accessories and User-supplied Items Accessories (included): none User-supplied (not included): RJ45 connector Pin Assignments RJ45 Connector No. Signal Name Function 1 8 D2 D1 1-2 Reserved – 3 D1 Data port (Hi[...]

  • Página 76

    3.6.3 DLC16 Card (KX-NCP1172) Function 16-port digital extension card for DPTs, DSS consoles, and PT -interface CSs. RJ45 LED T o extensions Accessories and User-supplied Items Accessories (included): none User-supplied (not included): RJ45 connector Pin Assignments RJ45 Connector No. Signal Name Function 1 8 D2 D1 1-2 Reserved – 3 D1 Data port ([...]

  • Página 77

    3.6.4 SLC8 Card (KX-NCP1173) Function 8-port extension card for SLTs with Caller ID (FSK). RJ45 LED T o extensions Accessories and User-supplied Items Accessories (included): none User-supplied (not included): RJ45 connector Pin Assignments RJ45 Connector No. Signal Name Function 1 8 T R 1-3 Reserved – 4 T Tip 5 R Ring 6-8 Reserved – LED Indica[...]

  • Página 78

    3.6.5 SLC16 Card (KX-NCP1174) Function 16-port extension card for SLTs with Caller ID (FSK). RJ45 LED T o extensions Accessories and User-supplied Items Accessories (included): none User-supplied (not included): RJ45 connector Pin Assignments RJ45 Connector No. Signal Name Function 1 8 T R 1-3 Reserved – 4 T Tip 5 R Ring 6-8 Reserved – LED Indi[...]

  • Página 79

    3.7 Information about the Other Physical Cards 3.7.1 OPB3 Card (KX-NCP1190 ) Function Optional 3-slot base card for mounting a maximum of 3 option cards from the following: • DPH4 card • EIO4 card • ECHO16 card • MSG4 card • ESVM4 card LED Accessories and User-supplied Items Accessories (included): none User-supplied (not included): none [...]

  • Página 80

    3.7.2 DPH4 Card (KX-TDA0161) Function 4-port doorphone card for 4 doorphones and 4 door openers. To be mounted on the OPB3 card. 1 2 Fully insert the connectors through the panel openings. Screw OPB3 Card T o door openers T o doorphones 10-pin 8-pin DPH4 Card Accessories and User-supplied Items Accessories (included): Screws ´ 3, 10-pin terminal b[...]

  • Página 81

    Pin Assignments 8-pin Terminal Block No. Signal Name Function 81 1 DP4 Doorphone 4 transmit 2 com4 Doorphone 4 receive 3 DP3 Doorphone 3 transmit 4 com3 Doorphone 3 receive 5 DP2 Doorphone 2 transmit 6 com2 Doorphone 2 receive 7 DP1 Doorphone 1 transmit 8 com1 Doorphone 1 receive 10-pin Terminal Block No. Signal Name Function 10 1 1-2 Reserved – [...]

  • Página 82

    3.7.3 EIO4 Card (KX-TDA0164) Function 4-port external input/output card. To be mounted on the OPB3 card. OPB3 Card Fully insert the connectors through the panel openings. Screw 10-pin 8-pin EIO4 Card T o external sensors T o exte rnal relays 1 2 Accessories and User-supplied Items Accessories (included): Screws ´ 3, 10-pin terminal block ´ 1, 8-p[...]

  • Página 83

    Pin Assignments 8-pin Terminal Block No. Signal Name Function 81 1 C4b Control 4 2 C4a Control 4 com 3 C3b Control 3 4 C3a Control 3 com 5 C2b Control 2 6 C2a Control 2 com 7 C1b Control 1 8 C1a Control 1 com 10-pin Terminal Block No. Signal Name Function 10 1 1-2 Reserved – 3 OP4b Opener 4 4 OP4a Opener 4 com 5 OP3b Opener 3 6 OP3a Opener 3 com [...]

  • Página 84

    External Sensor Power to the external sensor is provided from the EIO4 card and must be grounded through the EIO4 card as indicated in the diagram below. A pair of "sensor" and "common" lines are connected to the EIO4 card for each external sensor. The PBX detects input from the sensor when the signal is under 100 W . Connection[...]

  • Página 85

    3.7.4 ECHO16 Card (KX-TDA0166) Function 16-channel card for echo cancellation during conferences. To be mounted on the OPB3 card. OPB3 Card inside ECHO16 Card Screws Accessories and User-supplied Items Accessories (included): Screws ´ 3 User-supplied (not included): none Note To establish a conference call involving 6 to 8 parties, install an ECHO[...]

  • Página 86

    3.7.5 MSG4 Card (KX-TDA0191) Function 4-channel message card. To be mounted on the OPB3 card. OPB3 Card inside MSG4 Card Screws Accessories and User-supplied Items Accessories (included): Screws ´ 3 User-supplied (not included): none 86 Installation Manual Document Version 2011-10 3.7.5 MSG4 Card (KX-TDA0191)[...]

  • Página 87

    3.7.6 ESVM4 Card (KX-TDA0194) Function 4-channel simplified voice message card for Simplified Voice Message feature. Also supports MSG card features. To be mounted on the OPB3 card. OPB3 Card inside ESVM4 Card Screws Accessories and User-supplied Items Accessories (included): Screws ´ 3 User-supplied (not included): none CAUTION When installing/un[...]

  • Página 88

    3.8 Connection of Extensions 3.8.1 Maximum Cabling Distances of the Extension Wiring (Twisted Cable) KX-T7600 Series DPT KX-DT300 Series DPT SL T Other PT (DPT/APT) and DSS Console PT -interface CS Cable Maximum Distance 26 A WG: 222 m (728 ft) 24 A WG: 347 m (1 138 ft) 22 A WG: 500 m (1640 ft) CA T 5: 347 m (1 138 ft) Cable Maximum Distance 26 A W[...]

  • Página 89

    PT-interface CS DPT APT DSS Console SLT DLC16, DLC8 Cards ü ü ü " ü " indicates that the extension card supports the terminal. Document Version 2011-10 Installation Manual 89 3.8.1 Maximum Cabling Distances of the Extension Wiring (Twisted Cable)[...]

  • Página 90

    3.8.2 Parallel Connection of the Extensions Any SLT can be connected in parallel with an APT or a DPT as follows. Note In addition to an SLT, an answering machine, a fax machine or a modem (PC) can be connected in parallel with an APT or a DPT. With APT For parallel connection, eXtra Device Port (XDP) mode must be disabled for that port through sys[...]

  • Página 91

    With DPT Parallel mode or eXtra Device Port (XDP) mode can be selected through system programming. If XDP mode is enabled through system programming, parallel connection is not possible. Refer to "13.1.2 Paralleled Telephone" and "5.1.7 Extension Port Configuration" in the Feature Manual for further information. Using a Modular [...]

  • Página 92

    With KX-T7600 Series DPT (except KX-T7665) T o DHLC4 card DPT SL T T o DHLC4 card T o SL T 2-conductor wiring cord Connect pins "T" and "R". 4-conductor wiring cord Connect pins "T", "R", "D1" and "D2". TO MAIN UNIT / P ABX TO TE L With Other DPT T o DHLC4 card DPT SL T T o DHLC4 card T o [...]

  • Página 93

    3.8.3 Digital EXtra Device Port (Digital XDP) Connection A DPT can be connected to another DPT on the Digital XDP connection. In addition, if the DPT is connected to a DHLC4 card, it can also have an SLT connected in Parallel mode or XDP mode. Note • Both DPTs must be KX-DT300/KX-T7600 series DPTs (except KX-T7640 ). Note that the KX-T7667 can on[...]

  • Página 94

    Using an EXtra Device Port SL T Master DPT Slave DPT 4-conductor wiring cord Connect pins "T", "R", "D1" and "D2". 2-conductor wiring cord Connect pins "T" and "R". 4-conductor wiring cord Connect pins "T", "R", "D1" and "D2". T o DLC8/DLC16 card T o[...]

  • Página 95

    With KX-T7600 Series DPT Using a Modular T-Adaptor T o DLC8/DLC16 card T o DHLC4 card (for connection of SL T) 4-conductor wiring cord Connect pins "D1" and "D2". Slave DPT SL T Master DPT Modular T -Adaptor 4-conductor wiring cord Connect pins "D1" and "D2". 2-conductor wiring cord Connect pins "T"[...]

  • Página 96

    Using an EXtra Device Port SL T Master DPT Slave DPT 4-conductor wiring cord Connect pins "T", "R", "D1" and "D2". 2-conductor wiring cord Connect pins "T" and "R". 4-conductor wiring cord Connect pins "T", "R", "D1" and "D2". Slave DPT Master DPT T [...]

  • Página 97

    3.8.4 First Party Call Control CTI Connection CTI connection between a PC and a KX-DT343/KX-DT346/KX-T7633/KX-T7636 DPT provides first party call control. The CTI connection is made via a USB interface (version 2.0), and uses the TAPI 2.1 protocol. A USB Module must be connected to the DPTs. Note The operating system of the PC required for first pa[...]

  • Página 98

    3.9 Connection of Doorphones, Door Openers, External Sensors, and External Relays 3.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays The PBX supports a maximum of 16 doorphones, 16 door openers, 16 external sensors, and 16 external relays. Note Doorphones, door openers, external sensors, and external relays are user[...]

  • Página 99

    Note for KX-T7765 Users When loosening/tightening the screw, do not scratch the cabinet wall with the driver shaft. Cabinet Wall 2. Pass the wires through the hole in the base cover, and attach the base cover to a wall using 2 screws. Screw To 8-pin terminal block Note Two kinds of screws are included with the doorphone. Please choose the appropria[...]

  • Página 100

    Connection Use 8-pin and 10-pin terminal blocks (included with the card) for connection. 1. While pressing down on the hole at the top of the terminal block using a screwdriver, insert the wire into the side hole as shown below. Repeat this procedure for other doorphones, door openers, external sensors, and external relays. Refer to "3.7.2 DPH[...]

  • Página 101

    3.10 Connection of Peripherals 3.10.1 Connection of Peripherals Cable Maximum Distance Maximum Distance Maximum Distance PC BGM Music on Hold Pager: Amplifier/Speaker PC Printer 26 A WG: 10 m (32 ft) 24 A WG: 10 m (32 ft) 22 A WG: 10 m (32 ft) CA T 5: 10 m (32 ft) Cable Maximum Distance 26 A WG: 10 m (32 ft) 24 A WG: 10 m (32 ft) 22 A WG: 10 m (32 [...]

  • Página 102

    BGM/MOH The PBX provides Background Music and Music on Hold. An external music source (e.g., user-supplied radio) can be connected to the PBX. CAUTION The External Music Jack is an SELV port and should only be connected to an approved SELV device. Notice • Wiring should be done carefully to prevent undue force being exerted on the plug. Otherwise[...]

  • Página 103

    Connection Charts For connecting a printer/PC with a 9-pin RS-232C connector Printer/PC (9-pin) Circuit T ype (EIA) BB BA CD AB CC CA CB Signal Name RD (RXD) SD (TXD) ER (DTR) SG DR (DSR) RS (RTS) CS (CTS) Pin No. 2 3 4 5 6 7 8 PBX (9-pin) Signal Name Pin No. RD (RXD) 2 SD (TXD) 3 ER (DTR) 4 SG 5 DR (DSR) 6 RS (RTS) 7 CS (CTS) 8 Circuit T ype (EIA)[...]

  • Página 104

    • Clear To Send (CTS): …(input) An ON condition of circuit CS (CTS) indicates that the printer or the PC is ready to receive data from the unit. The unit does not attempt to transfer data or receive data when circuit CS (CTS) is OFF. • Frame Ground (FG) Connects to the unit frame and the ground conductor of the AC power cord. 104 Installation[...]

  • Página 105

    3.11 LAN Connection 3.11.1 LAN Connection Connection Chart for LAN Connection The PBX is equipped with a LAN port for connecting to a LAN so that IP telephones (IP -PTs, IP softphones, SIP Extensions), IP-CSs, PCs and a CTI Server can be connected on a private IP network. TX+ TX- RX+ RX- 1 2 3 6 1 2 3 6 RX+ RX- TX+ TX- PC CTI Server IP-PT Switching[...]

  • Página 106

    3.12 Power Failure Connections 3.12.1 Power Failure Connections When the power supply to the PBX fails, power failure transfer (PFT) will switch from the current connection to the Power Failure Connection. Refer to "13.1.11 Power Failure Transfer" in the Feature Manual for further information. Using Analog CO Line Card and Extension Card [...]

  • Página 107

    RJ45 Connector Pin Assignments for Analog CO line Card PFT Port No. Signal Name Function 1 8 R T 1-3 Reserved – 4 R Ring 5 T Tip 6-8 Reserved – RJ45 Connector Pin Assignments for Extension Card PFT Port No. Signal Name Function 1 8 T R 1-3 Reserved – 4 T Tip 5 R Ring 6-8 Reserved – Document Version 2011-10 Installation Manual 107 3.12.1 Pow[...]

  • Página 108

    3.13 Starting the PBX 3.13.1 Starting the PBX WARNING Make sure that the AC outlet is properly grounded, then securely connect the 3 -pin AC plug including the grounded pin. CAUTION • Use only the AC power cord included with the PBX. • Before touching the System Initialize Switch, discharge static electricity by touching ground or wearing a gro[...]

  • Página 109

    2. Plug the AC power cord into the PBX and pass the cord through the hook clip as indicated. Push the hook clip in the direction of the arrow until it clicks. Note For safety reasons, do not stretch or pinch the AC power cord. To grounded AC Outlet 3. Plug the other end of the cord into an AC outlet and turn on the PBX. The RUN indicator will flash[...]

  • Página 110

    Confirming the CO Line Connection After initialization, program the PBX and connect CO lines to the PBX. To confirm that the CO lines are successfully connected, dial [ ] [3] [7] + CO line number (3 digits) on a PT, or press the PT's S-CO button. You will hear a dial tone if the CO line is available and connected. 110 Installation Manual Docum[...]

  • Página 111

    Section 4 Guide for the Maintenance Console Explains the installation procedure, structure, and basic information of the Maintenance Console. Document Version 2011-10 Installation Manual 111[...]

  • Página 112

    4.1 Overview 4.1.1 Overview The Maintenance Console is designed to serve as an overall system programming reference for the PBX. To program and administer the PBX by PC, you need to install the Maintenance Console onto the PC. This section describes overview and installation of the Maintenance Console only. Menu Bar System Menu Note The contents an[...]

  • Página 113

    4.2 PC Connection 4.2.1 PC Connection Connection via MNT Port of IPCMPR Card To LAN Port MNT Port Notice When connecting a PC to the PBX, a fixed IP address must be assigned to the PC. For information about fixed IP addresses, ask your network administrator. Note For pin assignments and maximum cabling distance, refer to "3.10.1 Connection of [...]

  • Página 114

    External Modem Connection Modem To RS-232C port (25-pin) To CO line/PBX extension port assigned as the CO line destination RS-232C Port (9-pin) External Modem (25-pin) PBX (9-pin) Signal Name RD (RXD) SD (TXD) ER (DTR) DR (DSR) Signal Name RD (RXD) SD (TXD) ER (DTR) DR (DSR) Pin No. 2 3 4 6 Pin No. 3 2 20 6 CAUTION To protect the system, keep the f[...]

  • Página 115

    4.3 Installation of the Maintenance Console 4.3.1 Installing and Starting the Maintenance Console System Requirements Required Operating System • Microsoft ® Windows ® XP, Windows Vista ® Business, or Windows 7 Professional operating system Minimum Hardware Requirements • HDD: 100 MB of available hard disk space • The PC must fulfill the h[...]

  • Página 116

    5. Click Connect . 6. a. Select KX-NCP500/1000 from PBX Model . b. Select the LAN or RS-232C tab, depending on the type of PC connection with the PBX. c. Specify the settings as required. Note When connecting to the PBX for the first time selecting LAN , the IP Address and Port Number must be set to 192.168.0.101 and 35300 respectively. d. Enter th[...]

  • Página 117

    Characters which can be displayed on a KX-DT300/KX-T7600 series PT are shown below in the white cells. • The PC will not perform any shutdown operation, or enter the power -saving system standby mode while the Maintenance Console is connected to the PBX. To perform either of the operations above, first close the connection to the PBX. Document Ve[...]

  • Página 118

    118 Installation Manual Document Version 2011-10 4.3.1 Installing and Starting the Maintenance Console[...]

  • Página 119

    Section 5 Troubleshooting This section provides information on the PBX and telephone troubleshooting. Document Version 2011-10 Installation Manual 119[...]

  • Página 120

    5.1 Troubleshooting 5.1.1 Installation PROBLEM PROBABLE CAUSE SOLUTION You cannot make/receive calls via an IP network. • DSP card malfunction • Replace the corresponding card. • IPCMPR card malfunction • Replace the IPCMPR card (be sure to turn off the PBX when replacing). • Not enough activation keys • Purchase additional activation k[...]

  • Página 121

    PROBLEM PROBABLE CAUSE SOLUTION Extensions (except IP-PT/ SIP Extension) do not operate. • Extension card malfunction • Replace the corresponding card. • Poor connection between the PBX and the extension • Take the extension and plug it into the same extension port using a short telephone cord. If the extension works, then the connection be[...]

  • Página 122

    PROBLEM PROBABLE CAUSE SOLUTION The LINK indicator of the IPCMPR does not turn on. • IPCMPR card malfunction • Replace the IPCMPR card (be sure to turn off the PBX when replacing). • Poor connection. • Make sure that an 8-pin twisted pair cable is used for connection. • Make sure that none of the CAT 5 cables in use are over 100 m (328 ft[...]

  • Página 123

    5.1.2 Connection Connection between the PBX and a PT : CAUSE The T/R is connected to the D1/D2. SOLUTION No Can you dial an extension? Use the correct cord (the inner 2 wires are for T/R and the outer 2 wires are for D1/D2) D1 T R D2 D1 T R D2 PBX Extension Connection between the PBX and an SL T : CAUSE SOLUTION If a telephone equipped with an A-A1[...]

  • Página 124

    Connection between the central office and the PBX: CAUSE CO line is connected to the T2/T1. SOLUTION Reconnect the CO line to the T1/R1 or T2/R2 of the telephone jack using 2- conductor wiring. T2 R1 T1 R2 CO line PBX CO line is connected to the T2/R1. PBX CO line T2 R1 T1 R2 No Can you dial out on a CO line? (Continued from the previous page.) 124[...]

  • Página 125

    5.1.3 Operation PROBLEM PROBABLE CAUSE SOLUTION • Cannot set the IP address, subnet mask address, and PBX IP address to the IP-PT. • An unusable value is being set. • Set an IP address within the valid range. IP address of the IP-PT/PBX: "1.0.0.0" to "223.255.255.255 " Subnet mask address: "0–255.0–255.0–255.0?[...]

  • Página 126

    PROBLEM PROBABLE CAUSE SOLUTION • Originating an outside call, call transfer, or conference cannot be performed. • The corresponding flexible button does not exist on the PT. • Program the flexible button. Refer to "6.1.3 Flexible Buttons" in the Feature Manual. • The KX-HGT100 does not work properly, or some features cannot be pe[...]

  • Página 127

    5.1.4 Using the Reset Button If the PBX does not operate properly, use the Reset Button. Before using the Reset Button, try the system feature again to confirm whether there definitely is a problem or not. CAUTION In order to avoid possible corruption of data on the SD Memory Card, please ensure that the "SD ACCESS" LED is off before pres[...]

  • Página 128

    5.1.5 Troubleshooting by Error Log When a major system error occurs in the PBX, the ALARM indicator on the front of the cabinet turns on red, and the system logs the error information. Error Log Display Format Below is the display format of the error log. For information about how to view the error log using the Maintenance Console, refer to "[...]

  • Página 129

    Item Description 5 Sub Code The 6-digit sub code of the relevant hardware (X1YYZZ). • X: Slot type – Physical slot: " " (blank) – Virtual slot: "*" (asterisk) • 1: Cabinet number • YY: Slot number – KX-NCP500 (Physical slot): 00 to 05 (00: IPCMPR Card Slot/Built-in ESVM card; 01 to 05: Free Slots) – KX-NCP1000 (Phy[...]

  • Página 130

    130 Installation Manual Document Version 2011-10 5.1.5 Troubleshooting by Error Log[...]

  • Página 131

    Section 6 Appendix Document Version 2011-10 Installation Manual 131[...]

  • Página 132

    6.1 Revision History 6.1.1 PBMPR Software File Version 1.01xx Changed Contents • 4.3.1 Installing and Starting the Maintenance Console 132 Installation Manual Document Version 2011-10 6.1.1 PBMPR Software File Version 1.01xx[...]

  • Página 133

    6.1.2 PBMPR Software File Version 2.02xx New Options • System Components Table – KX-NCS2240 Activation Key for CA PRO for 40 Users (CA Pro 40users) – KX-NCS2249 Activation Key for CA PRO for 128 Users (CA Pro 128users) – KX-NCP0158 DECT 6.0 8-Channel IP Cell Station Unit Using a V-IPCS4 Card for DECT 6.0 Portable Station – - Virtual 4 IP [...]

  • Página 134

    6.1.3 PBMPR Software File Version 4.1xxx Changed Contents • 1.3.3 System Capacity • 2.1.1 Activation Keys • 2.1.2 Activation Key Code and Key Management System 134 Installation Manual Document Version 2011-10 6.1.3 PBMPR Software File Version 4.1xxx[...]

  • Página 135

    6.1.4 PBMPR Software File Version 5.0xxx Changed Contents • 1.3.3 System Capacity – Maximum Optional Service Cards – Maximum CO Lines and Extensions – Maximum Terminal Equipment – Digital EXtra Device Port (Digital XDP) Connection Capacity – Power Supply Unit Capacity • 2.1.1 Activation Keys • 3.3.1 IPCMPR Card Document Version 2011[...]

  • Página 136

    136 Installation Manual Document Version 2011-10 6.1.4 PBMPR Software File Version 5.0xxx[...]

  • Página 137

    Index Document Version 2011-10 Installation Manual 137[...]

  • Página 138

    Numerics 16-Channel Echo Canceller Card ( KX-TDA0166) 23, 85 16-Channel IP Proprietary Telephone Activation Key (KX-NCS3516) 40 16-Channel IP Softphone/IP Proprietary Telephone Activation Key (KX-NCS3216) 40 16-Channel SIP Extension Activation Key (KX-NCS3716) 40 16-Channel VoIP DSP Card (KX-TDE0110) 24, 63 16-Port Digital Extension Card (KX-NCP117[...]

  • Página 139

    KX-NCP1171 (8-Port Digital Extension Card) 23, 75 KX-NCP1172 (16 -Port Digital Extension Card) 23, 76 KX-NCP1173 (8-Port Single Line Telephone Extension Card) 23, 77 KX-NCP1174 (16-Port Single Line Telephone Extension Card) 23, 78 KX-NCP1180 (4-Port Analog Trunk Card) 23, 67 KX-NCP1187 (T-1 Trunk Card) 23, 69 KX-NCP1190 (Optional 3-Slot Base Card) [...]

  • Página 140

    Slots for Virtual CO Line Cards 28 Slots for Virtual Extension Cards 28 Specifications 25 Specifications, Characteristics 27 Specifications, General Description 25 Specifications, System Capacity 28 Starting the PBX 108 Surge Protector Installation 57 System Capacity 28 System Connection Diagram 21 System Initialization Procedure 108 System Initial[...]

  • Página 141

    Document Version 2011-10 Installation Manual 141 Notes[...]

  • Página 142

    One Panasonic Way, Secaucus, New Jersey 07094 http://www.panasonic.com/bts Copyright: This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd. © Panasonic System Netw[...]