Panasonic AG-HPX170P manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Panasonic AG-HPX170P. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Panasonic AG-HPX170P o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Panasonic AG-HPX170P se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Panasonic AG-HPX170P, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Panasonic AG-HPX170P debe contener:
- información acerca de las especificaciones técnicas del dispositivo Panasonic AG-HPX170P
- nombre de fabricante y año de fabricación del dispositivo Panasonic AG-HPX170P
- condiciones de uso, configuración y mantenimiento del dispositivo Panasonic AG-HPX170P
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Panasonic AG-HPX170P no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Panasonic AG-HPX170P y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Panasonic en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Panasonic AG-HPX170P, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Panasonic AG-HPX170P, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Panasonic AG-HPX170P. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    F0808T0 -P D Printed in Japan ENGLISH VQT1U92 Before use Description of par ts Preparation Shooting Playbac k Editing Displays Menu Ref erence Operating Instructions Memory Card Camera-Recor der Model No. A G-HPX170P Before operating this pr oduct, please read the instructions carefully and save this manual for future use. This product is eligible [...]

  • Página 2

    2 Read this rst! indicates safety inf ormation. CA UTION RISK OF ELECTRIC SHOCK DO NO T OPEN CA UTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMO VE COVER (OR BA CK). NO USER-SER VICEABLE P ARTS INSIDE. REFER TO SER VICING T O QU ALIFIED SERVICE PERSONNEL. The lightning ash with arrowhead symbol, within an equilateral triangle, is inte[...]

  • Página 3

    3 FCC NO TICE (USA) Declaration of Conf ormity Model Number: AG-HPX170P T rade Name: P ANASONIC Responsible P arty: P anasonic Cor poration of North Amer ica One Panasonic Wa y , Secaucus, NJ 07094 Suppor t contact: P anasonic Broadcast & T elevision Systems Company 1-800-524-1448 This device complies with P ar t 15 of FCC Rules. Operation is s[...]

  • Página 4

    4 IMPOR T ANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) K eep these instructions. 3) Heed all warnings. 4) Follo w all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not bloc k any ventilation openings . Install in accordance with the manuf acturer’ s instructions. 8) Do not install near any h[...]

  • Página 5

    5 Software information f or this product 1. Customer advisory: This product includes software licensed under the GNU General Public License (GPL) and GNU Lesser General Public License (LGPL); customers have the right to download, modify , and redistribute source code f or this software. Descriptions of the GPL and LGPL are stored on the installatio[...]

  • Página 6

    6 Contents Read this rst! ..................................................... 2 IMPORT ANT SAFETY INSTR UCTIONS .............. 4 Recommendation for Use of Genuine Panasonic Battery P ack (Rechargeable Battery) ................................... 4 Software information f or this product ............... 5 Before use Outline of operations .......[...]

  • Página 7

    7 Synchro scan ................................................... 50 Switching A udio Input ....................................... 51 Using the built-in microphone .......................... 51 Using another microphone and audio equipment .......................................... 51 Adjusting the recording lev el ........................... 52 U[...]

  • Página 8

    8 Outline of operations This unit is compatible with P2 (Prof essional Plug-in) cards. The P2 card has a large capacity with a high transf er rate, and allows y ou sophisticated movie-making on this handy camera, including HD (High Denition) recording and smooth editing/dubbing. BNC cable (HD-SDI) Video equipment/ Monitor The setting values such[...]

  • Página 9

    Before use 9 Precaution f or use Alwa ys take some trial shots before actual shooting. When shooting impor tant ev ents (such as weddings), alwa ys tak e some trial shots and check that the sound and images hav e been recorded properly before actual shooting. Be sure to check and set the calendar and time zone. These settings affect the control and[...]

  • Página 10

    10 Accessories Battery *1 AC Adapter AC po wer supply cord/ DC cord Wireless remote control and battery (CR2025) Eye cup Microphone holder Screws f or microphone holder 6-mm screws (2) 12-mm screws (2) Microphone holder adapter Shoulder belt Component video cable PIN-BNC conv ersion plugs (3) 30-mm ferrite core (2)*2 35-mm ferrite core (2)*2 CD-ROM[...]

  • Página 11

    Description of par ts 11 Description of par ts Right side and rear side POWER ON OFF 1 2 17 16 15 18 20 21 22 23 25 3 4 5 7 8 9 10 11 12 13 1 2 24 19 6 14 1 PO WER switch (P age 19) 2 ST ART/ST OP button (P age 25) 3 REC CHECK button (P age 25) 4 Zoom button (P age 3 0) 5 HANDLE ZOOM switch (P age 3 0) 6 Recording enable/disab le switch (P age 40) [...]

  • Página 12

    12 Description of parts (continued) Left side BARS CH1 SELECT COUNTER RESET/TC SET REC CH2 SELECT AUDIO INT(L) INPUT1 INPUT2 SHUTTER SPEES SELECT INT(R) INPUT2 INPUT1 MIC POWER +48V ON OFF INPUT2 ON OFF LCD ZEBRA EVF DTL OIS WFM MENU PUSH-SET PAGE/AUDIO MON/VAR THUMBNAIL AWB 3 4 6 5 2 12 8 11 9 13 14 16 15 17 18 19 20 10 21 1 33 34 27 32 35 31 30 2[...]

  • Página 13

    Description of par ts 13 T erminals and mounting par ts SDI OUT 1394 CAM REMOTE FOCUS IRIS ZOOM S/S COMPONENT OUT 1 2 3 14 16 15 12 5 4 6 10 9 8 11 7 13 1 USB terminal (Mini-B) (P age 77) 2 Light shoe 3 Microphone shoe (P age 76) 4 P2 card slots (P age 25) 5 SD memory card slot (P age 29) 6 P2 card eject b uttons (Page 28) 7 SDI OUT terminal (P age[...]

  • Página 14

    14 Description of parts (continued) Remote control The follo wing buttons are f or functions that cannot be ex ecuted on the camera-recorder . • PHO TO SHO T • TITLE • A.DUB • MUL TI/P-IN-P • SELECT • ST ORE • OFF/ON • PB.ZOOM • INDEX OSD COUNTER RESET TITLE STILL AD V P AUSE STILL AD V INDEX SELECT STORE OFF/ON P .B.DIGIT AL V AR[...]

  • Página 15

    Preparation 15 The battery Charging Before using the battery , fully charge it with the A C adapter . K eep a spare batter y with you. 1 Align the battery with the marking on the A C adapter , place it at, and slide it in the direction shown below . Y ou cannot charge the batter y if the DC cord is connected to the DC OUT connector , so disconne[...]

  • Página 16

    16 Installing and remo ving the power suppl y Installing and removing the battery Installation 1 Insert the batter y until it clic ks into place. Remov al 1 Set the PO WER switch to OFF , and chec k that the mode lamp is off. 2 While pressing the battery release button, raise up the battery to remove it. Suppor t the battery with your hand to ensur[...]

  • Página 17

    Preparation 17 Adjusting the hand strap Adjust the hand strap to suit your hand. 1 Open the cover and adjust the length. 2 Close the cover . Make sure the co ver is fully closed. • Attaching the shoulder strap Attach the shoulder strap and use it as a precaution against dropping the camera. 20 mm or more 20 mm or more Detaching and attac hing the[...]

  • Página 18

    18 The remote contr ol Insert the batter y 1 Push the catch in the direction shown b y arro w A to remove the holder . 2 Insert the batter y with the “+” marked side facing up. 3 Return the holder to its original position. When the battery (CR2025) has r un out, replace it with a new one . (The battery lasts about one year , depending on the fr[...]

  • Página 19

    Preparation 19 T urn on/off the camera While pressing the lock release , tur n the POWER switch. T urn on the camera: The mode lamp (CAM) lights red (CAM mode) and the camera is now in the shooting standb y mode. T urn off the camera: The mode lamp (CAM) goes out. P ower sa ving mode When the camera is left idle in pause mode for about 5 min utes, [...]

  • Página 20

    20 Viewnder This camera has two vie wnders; one is a miniature LCD in the viewnder and the other is a retractable 3.5-inch LCD . Use the viewnder that best suits the application and shooting conditions. The brightness and hue may diff er between the images appearing on the viewnder and LCD monitor and those display ed on a TV monitor[...]

  • Página 21

    Preparation 21 Emphasizing outlines Emphasizing the outlines of the images you see in the viewnder or on the LCD mak es it easier to focus . Emphasizing the outlines does not effect the images you shoot. 1 In CAM mode, press EVF DTL. “EVF DTL ON” appears on the screen for about 2 seconds. BARS CH1 SELECT RESET/TC SET REC CH2 SELECT AUDIO INT[...]

  • Página 22

    22 Viewnder (continued) Adjusting the screen display 1 Set the PO WER switch to ON. (P age 19) 2 Press the MENU button. For men u operation (P age 94) Y ou can also use the menu buttons on the remote control. (P age 14) 3 Viewnder adjustments Select YES under EVF SET on the setting menu DISPLA Y SETUP screen. LCD monitor adjustments Set YES u[...]

  • Página 23

    Preparation 23 Adjusting the backlight The steps below show ho w to set the brightness of the LCD monitor to one of three possible le vels . 1 Select LCD BL under LCD on the setting menu SW MODE screen. This assigns LCD BL to the LCD button. 2 Press the LCD button. Each press of the button s witches backlight brightness in the following order: NORM[...]

  • Página 24

    24 Setting the calendar The CLOCK SET value is recorded in the contents (clip), and affects the sequence of pla yback of the thumbnails. Before carrying out recording, be sure to check and set CLOCK SET and TIME ZONE. This shows y ou how to adjust the calendar to 5:20 PM on December 25, 2008. 1 Set the PO WER switch to ON. (P age 19) 2 Press the ME[...]

  • Página 25

    Shooting 25 Basic shooting operations Preparing to shoot 1 Set the PO WER switch to ON. (P age 19) 2 Lift up the viewnder , press the side of the card slot co ver ( A ), and slide the cover ( B ) to open it. 3 Insert the P2 card securely in the card slot. 4 Push the P2 card eject button to the direction of the arro w, and close the card slot cov[...]

  • Página 26

    26 Basic shooting operations (continued) Checking photos taken (REC CHECK) In the shooting pause mode, press the REC CHECK button. This plays bac k about 2 seconds of the video and audio of the most recently recorded clip before returning to pause mode. Note that this REC CHECK por tion will also be recorded to any equipment y ou have set up to mak[...]

  • Página 27

    Shooting 27 3 Press the MENU button. For men u operation (P age 94) MENU PUSH-SET SLOT SEL MODE CAM MCR PC Operation lever Mode lamp MENU button Mode button • 4 On the menu, select OPERA TION and then FORMA T . (P age 68) A screen such as the one shown below appears. Select the number of the slot into which you inserted the P2 card to be formatte[...]

  • Página 28

    28 Basic shooting operations (continued) Remove the P2 car d 1 Lift up the viewnder , press the side of the card slot co ver ( A ), and slide the cover ( B ) to open it. 2 Check that the P2 card access lamp is not blinking orange. 3 Raise the P2 card eject button and press it. 4 Remove the P2 card. 4 3 P2 card access lamp P2 card eject button Do[...]

  • Página 29

    Shooting 29 Using SD/SDHC memory cards Y ou can use SD and SDHC memor y cards (the term “SD memory card” is used f or both hereafter) to sav e and load SCENE les and USER les, and to upload clip meta data. (P age 55) Installing and removing the SD memory card Installation 1 Lift up the viewnder , press the side of the card slot co ver [...]

  • Página 30

    30 Using the zoom function On the remote control Press ZOOM/V OL to zoom with the motor drive. Zoom speed is xed at medium. ZOOM/V OL button OSD COUNTER RESET TITLE STILL ADV P AUSE STILL ADV INDEX SELECT STORE OFF/ON P .B.DIGITAL VAR. SEARCH V OL + - PB. ZOOM MENU SET ITEM STOP INDEX MUL TI/ P-IN-P REC A.DUB PLA Y /REW FF/ ZOOM DA TE/ TIME PH O[...]

  • Página 31

    Shooting 31 V ariab le frame rates (VFR) By taking full advantage of the special char acteristics of P2 cards, this unit provides frame skipping (undercranking) recording and highspeed (ov ercranking) recording, which are actually movie techniques , without the use of a frame rate con verter. (Either the 30PN or 24PN mode must be set for this .) Si[...]

  • Página 32

    32 V ariable frame rates (VFR) (continued) Native recording 1 Using the REC FORMA T function (Pa ge 104) on the RECORDING SETUP screen, select 720P/30PN or 720P/24PN as the recording f ormat. 2 Select the appropriate scene le using the SCENE FILE dial. If necessary , before doing this, perf orm the camera settings from the setting menu, and regi[...]

  • Página 33

    Shooting 33 Using variab le frame rates (VFR) Standard speed shooting f or movie production When making movies to sho w on a screen, a frame rate of 24 fps (frames per second), which is the same as for lms , is the norm (1x speed). If y ou use the settings below , the same kind of playback as with screenings can be obtained. By using the 720P pr[...]

  • Página 34

    34 Shooting in 1080i/480i pr ogressive mode Selecting 1080i/30P , 1080i/24P , 1080i/24P A, 480i/30P , 480i/24P or 480i/24P A in the REC FORMA T option (Page 104) of the setting menu RECORDING SETUP screen enables shooting in progressiv e mode. 30P mode: Shoot 30 frames a second in the progressiv e mode. For output and recording, the 30-fr ame- pers[...]

  • Página 35

    Shooting 35 Shooting in manual mode Set the unit to manual mode when manually adjusting the focus , iris, gain and white balance. Switching to manual mode Slide the A UT O/MANU AL switch to MANU AL to switch to the man ual mode. ( A on the viewnder and LCD go out). A UT O/MANU AL switch Manual f ocusing FOCUS switch PUSH A UT O button A UT O/MAN[...]

  • Página 36

    36 Using focus assist Pressing the FOCUS ASSIST button magnies the center por tion of the image or brings up a frequency distribution graph at the top right of the image to assist during manual focusing. Y ou can use the FOCUS ASSIST setting on the SW MODE screen to change the viewnder and LCD monitor displays that appear when the FOCUS ASSIS[...]

  • Página 37

    Shooting 37 Adjusting the gain When the display is dark, increase the gain to brighten the display . GAIN switch 1 If the camera is in auto mode, use the A UT O/MANU AL switch to s witch to manual mode. (P age 35) 2 Switch the gain with the GAIN switch. L: Set here under nor mal conditions. (0 dB) M: Increase the gain of the image amplier . (The[...]

  • Página 38

    38 Adjusting the white balance In order to reproduce the white accurately , adjust the ratio between the three RGB primary colors. If the white balance is not adjusted properly , not only will the white be reproduced poorly but the color tones of the entire screen will also be downgr aded. When you are shooting in manual mode , readjust the white b[...]

  • Página 39

    Shooting 39 Using presets Use this feature when y ou hav e no time to make white balance adjustments. 1 If the camera is in auto mode, use the A UT O/MANU AL switch to s witch to manual mode ( A on the viewnder and LCD goes out). 2 Set the WHITE BAL switch to PRST . The current white balance value appears . White balance values 3200 K and 5600 K[...]

  • Página 40

    40 Shooting techniques f or different tar gets Low-angle shooting Set the Recording enable/disab le switch to ON and use the ST ART/ST OP button on the handle to make it easier to shoot from lo w angles. Set the Recording enable/disab le switch to OFF to prev ent inadvertent use of the ST AR T/ST OP button on the handle when this function is not ne[...]

  • Página 41

    Shooting 41 Checking and displa ying shooting status DISP/MODE CHK button When you hold do wn the DISP/MODE CHK button during recording standby or recording, all the information including the setting status of the shooting functions and a list of functions allocated to the USER buttons , will be display ed. When you release the b utton, the normal [...]

  • Página 42

    42 Optical Image Stabilizer Use the Optical Image Stabilizer (OIS) to reduce the effects of camer a shake when shooting by hand. Press the OIS button to turn the function on and off. appears on the screen when this function is on. T ur n the function off when using a tripod for more natural images. BARS CH1 SELECT RESET/TC SET REC CH2 SELECT AUDIO [...]

  • Página 43

    Shooting 43 W avef orm monitor function Press the WFM button in CAM mode to displa y a wa vef orm of the image on the LCD monitor. Pressing the WFM button once again closes the wa vef orm display . WFM (P age 10 3 ) on the setting menu SW MODE screen allows y ou to switch between the wa vef orm and vector display . The viewnder does not sho w th[...]

  • Página 44

    44 2-slot continuous recor ding If you insert two P2 cards into the two card slots, this function allows y ou to record continuously on the two cards. Y ou can also record continuously on three or more cards by replacing one card while data is being recorded on the other . (Hot swap recording) Howe ver , depending on when the P2 card is inser ted i[...]

  • Página 45

    Shooting 45 LAST CLIP DELETE function Assign LAST CLIP to any of the USER 1 – 3 buttons to enab le a conv enient wa y to delete the last recorded clip . Pressing the USER button to which LAST CLIP was assigned displa ys a YES/NO conrmation dialog on the screen. Select YES, and the last recorded clip is deleted and “LAST CLIP DELETE OK” is [...]

  • Página 46

    46 Using the special recor ding functions Making the settings in the RECORDING SETUP screen (P age 104) enables special recording functions such as Pre-recording, Interval Recor ding, One Shot Recording, and Loop Recording . These special recording functions can be used onl y when the settings below are established. OPERA TION TYPE item (page 98): [...]

  • Página 47

    Shooting 47 Operation is not possible e v en if only one of the inser ted cards is DIR ENTR Y NG CARD . (P age 91) After interval recording has star ted, a recordable P2 card cannot be used e ven if it is inser ted into an empty slot. The slots for recording in this mode are indicated by the orange P2 card access lamps. The slots for recording P2 c[...]

  • Página 48

    48 Using the special recording functions (contin ued) This function does not work during 1394 input recording. The pre-recording function does not work. Operation is not possible e v en if only one of the inser ted cards is DIR ENTR Y NG CARD . (P age 91) Stopping may tak e some time. The follo wing operations are not ackno wledged until the P2 car[...]

  • Página 49

    Shooting 49 If iris is set to auto, then it will open wider with higher shutter speeds and thereby reduce focal depth. It will take longer to f ocus when the shutter speed has been reduced so it is recommended that the unit be secured to a tripod, etc. for use . 1/60.0 PUSH STILL The current shutter speed appears on the viewnder and LCD screens [...]

  • Página 50

    50 With ar ticial lighting and especially uorescent lights and mercury-vapor lamps, the luminance changes in synchronization with the power line frequency . When this frequency is 50 Hz, mutual interf erence will occur between the camerarecorder’ s v er tical sync frequency (approx. 60 Hz) and the lighting frequency (50 Hz). This means that[...]

  • Página 51

    Shooting 51 During shooting, you can record up to f our channels of sound. Y ou can also switch the input sound to be recorded on each of the channels to the built-in microphones , external microphones or audio equipment connected to camera. (See table below) CH1* CH2** CH3 CH4 INT(L): Built-in microphone L INT(R): Built-in microphone R INPUT1 INPU[...]

  • Página 52

    52 Switching A udio Input (continued) 4 Use the CH1 SELECT switch to select the input signal to be recorded to audio channel 1. INT (L): Audio from the b uilt-in microphone Lch is recorded to audio channel 1. INPUT 1: Audio from a de vice connected to INPUT 1 terminal is recorded to channel 1. INPUT 2: Audio from a de vice connected to INPUT 2 term[...]

  • Página 53

    Shooting 53 The settings according to the variety of shooting circumstances are stored in each position of scene le dial. When shooting, you can retrie ve the necessary le instantly using scene le dial. Scene le dial During recording, the OPERA TION TYPE and FRAME RA TE (Page 98) settings remain unchanged ev en when the scene le is c[...]

  • Página 54

    54 Using scene les (continued) 6 When the screen shown below appear s, use the Operation lever to enter a 6- character le name. Set the same as user information. (Page 61) Characters that can be set Space, A to Z, 0 to 9, : ; < = > ? @ [ ] ^_-./ When the lename has been set, you can erase all characters using the RESET b utton on t[...]

  • Página 55

    Shooting 55 Y ou can sav e up to four scene le settings or other settings as les on an SD memory card, and you can also load them from the card. The data in all the scene les, F1 to F6, is rewritten. Inser t the SD memory card into the unit. (P age 29) If you ha ve sa ved a scene le 1 Set the unit’ s PO WER switc h to ON. 2 Select SCE[...]

  • Página 56

    56 Saving scene les and other settings on SD memory cards (contin ued) 6 Press the MENU button f our times to cancel the menu mode. T o load a le 1) P erform steps 1 to 3, select READ in step 4 and push the Operation le ver . When reading is completed, READ OK appears. T o title a le 1) P erform steps 1 to 4. 2) Push the Operation le ver i[...]

  • Página 57

    Shooting 57 Clip metadata SHOO T: This indicates the SHOO TER (name of the videographer), ST ART D A TE (date and time at which shooting star ted), END D A TE (date and time at which shooting ended) and LOCA TION/ AL TITUDE/LONGITUDE/LA TITUDE/SOURCE/ PLACE NAME (shooting location, altitude , longitude, latitude, inf ormation source, name of locati[...]

  • Página 58

    58 Using the Counter Counter display Y ou can display a counter that indicates ho w much time has elapsed during shooting or playbac k. 1 Press the COUNTER button. Each time you press the b utton, the display changes as follo ws. (Page 87) 0 : 00. 00 (CAM mode onl y) Counter value CLIP 0 : 00.00 (When CLIP is selected for the REC COUNTER item on th[...]

  • Página 59

    Shooting 59 Recharging the b uilt-in battery The camera’ s internal batter y sav es the date and time. “ ” appears on the screen of the viewnder or LCD when the internal batter y is running low on charge. Do the follo wing to recharge it. Reset the date and time when fully recharged. 1 Connect the AC adapter . (Page 16) Leav e the POWER s [...]

  • Página 60

    60 Push the Operation le ver in the q direction to mov e to the next digit, then push it in the e or r direction to select a value . TC PRESET PUSH MENU TO RETURN MONTH +/– : PUSH q / g 1 0 h 0 0 m 0 0 s 0 0 f SEL : PUSH t / y Y ou can reset the time code to zero by pressing RESET on the camera or the remote control. BARS CH1 SELECT RESET/TC SET [...]

  • Página 61

    Shooting 61 Setting user information Setting user information allows y ou to store 8-digit memo (information such as the date and time) in the hexagonal f ormat on the sub code track area. User information is automatically sav ed in the memory and retained after you tur n off the power . 1 Set the PO WER switch to ON. 2 In the setup menus, RECORDIN[...]

  • Página 62

    62 Charging the b uilt-in battery/Setting the time data (continued) 7 Push the Operation lever in the e direction to move to YES and press it again. UB PRESET PRESET OK? YES – – –  PUSH STILL NO 8 Press MENU twice to exit the menus. MENU[...]

  • Página 63

    Playbac k 63 Basic pla yback operations SLOT SEL MODE CAM MCR PC POWER ON OFF 1 2 Lock release 1 T urn the PO WER switch to ON. While pressing the lock release , tur n the POWER s witch to ON. 2 Press the mode button so the MCR lamp turns on. The camera is now in the MCR mode . Each time you press the b utton, the mode changes as below . MCR v CAM [...]

  • Página 64

    64 Thumbnail screen Video data created on the P2 card in one shooting session is called a clip . When the MCR mode has been established, the clips will be displa yed on the LCD screen as thumbnails . (When there is a large number of clips, it will tak e some time for them to be displa yed on the screen.) Y ou can perform the follo wing operations u[...]

  • Página 65

    Playbac k 65 1 Slot number display The number of the slot with the P2 card containing the clip indicated by the y ellow frame is shown here . (The number appears in yello w .) If a clip extends o ver the P2 cards in two slots, both n umbers will appear in yellow . When one of the follo wing warnings applies to an inser ted P2 card, the frame around[...]

  • Página 66

    66 Adding shot marks to c lips Adding shot marks ( M ) will make it easier to nd the clips you are looking f or . 1 Push the Operation lever in the w or q direction to move the yello w frame to the clip to which y ou will add a shot mark. 2 Press the USER button to which the shot mark function has been allocated. (Page 42) T o release a shot mar[...]

  • Página 67

    Playbac k 67 Thumbnail operations Selecting the thumbnail display method (THUMBNAIL) Y ou can display the kind of clips y ou want to see as thumbnails. Y ou can also set more precisely how you w ant the thumbnails to appear on the screen. 1 On the thumbnail screen, press the MENU button. A menu now appears . (P age 64) 2 Push the Operation lever in[...]

  • Página 68

    68 D A TE FORMA T: Select year/month/da y (YMD), month/day/ year (MD Y) or da y/month/year (DMY) as the order for displa ying the recording date/time. This format will be the same f or the recording date display ed by the clip properties and the recording date display ed by D A T A DISPLA Y . THUMBNAIL SIZE: Select LARGE (3x2) or NORMAL (4x3) for f[...]

  • Página 69

    Playbac k 69 FORMA T : Select this to format a P2 card or SD memory card. When you mo ve to FORMA T , the card selection screen will appear . Select the P2 slot (SLO T1 or SLOT2) or select SD CARD , and press the Operation le ver . Select YES to format the card or NO to cancel the formatting, and press the Operation le ver . REP AIR CLIP: Select th[...]

  • Página 70

    70 SYSTEM INFO: The version of the system in this camer a is display ed. EXIT : Select this to return to the last screen. Pressing the DISP/MODE CHK button in a thumbnail screen displays the CLIP PR OPERTY screen. Press the button again to return to the thumbnail screen. 4 T o exit the information screen, press the MENU button, push the Operation l[...]

  • Página 71

    Playbac k 71 3 P2 card remaining memory/total memory The P2 card’ s remaining memory and total memory are displayed here in 1-minute increments. Fr actions of a minute are rounded off, meaning the displa y ma y not match the slot total. 4 Card warning mark This mark is display ed when one of the follo wing warnings applies to a P2 card. 1) R UN D[...]

  • Página 72

    72 Thumbnail operations (continued) When deleting items of LOCA TION (shooting location) in SHOO T , items cannot be deleted independently . Make AL TITUDE blank, and the other items (LONGITUDE/LA TITUDE) are also deleted. Metadata of a clip with the incomplete clip indicator cannot be edited. T o edit metadata of a clip recorded in multiple P2 car[...]

  • Página 73

    Playbac k 73 PROPER TY : Select this to display the metadata which has been recorded in the unit. Push the Operation le ver in the e or r direction, select PROPER TY and push the Operation le ver to vie w the desired data. The Operation le ver also allows y ou to change the data. Changing method is the same as described in “Editing the recorded c[...]

  • Página 74

    74 Useful pla yback functions V ariable speed search This function enables y ou to change the playbac k speed and search for specic scenes . 1 Press the Operation lever in the q (playbac k) direction during playback. On the remote control, press the V AR. SEARCH button. INDEX SELECT STORE OFF/ON P .B.DIGIT AL VAR. SEARCH PB. ZOOM MENU SET ITEM S[...]

  • Página 75

    Playbac k 75 Clip skip 1 Press h (pause) during playback to set the unit to the pause mode. 2 Push the Operation lever in the t (rewind) or y (fast-forwar d) direction. STILL ADV P AUSE STILL ADV INDEX VOL + - STOP INDEX P - IN - P REC A . DUB PLAY /REW FF/ Camera or Remote control Adjusting the v olume MENU PUSH-SET PAGE/AUDIO MON/VAR THUMBNAIL OS[...]

  • Página 76

    76 Connecting external units Headphones 3.5-mm stereo mini jack Sound is no longer heard from the speaker when the headphones are connected. External microphone Microphone (optional) A G-MC200G INPUT1 or INPUT2 Microphone holder Microphone holder adapter 6 mm 12 mm When attaching an external microphone to the microphone shoe, use the supplied micro[...]

  • Página 77

    Editing 77 Computer (non-linear editing/le transfer) When connecting a 1394 cable Attach the provided two f errite cores (length: 30 mm) to the both ends of the cable . After passing the cable as sho wn in the gure on the right, close the ferrite cores until the y click into place and lock. Alwa ys take sufcient care when handling the f er[...]

  • Página 78

    78 Connecting external units (continued) When connecting the unit to an Apple Macintosh computer Connect the 1394 cable after turning on the power of the Apple Macintosh computer . Otherwise, the unit may not be mounted. The unit may not be recogniz ed after the Apple Macintosh computer has been placed in the hibernation state by its po wer-saving [...]

  • Página 79

    Editing 79 Digital video equipment (Dubbing) 1394 1394 cable (optional) Other Digital video equipment 6-pin This camera Ferrite core (included) Ferrite core (included) You can connect a digital video unit equipped with a 1394 connector and digitally transfer video and audio signals as well as time code. Before proceeding to connect or disconnect 13[...]

  • Página 80

    80 Connecting external units (continued) Video deck (Dubbing) SDI OUT COMPONENT OUT BNC cable (optional) Component video cable (included) Video cable (optional) Audio cab le (optional) White: CH1 (left channel) sound Red: CH2 (right channel) sound Connect one of these cables to the terminal on the video deck. VCR A UT O REC function When recording [...]

  • Página 81

    Editing 81 Y ou can edit the video data on P2 cards nonlinearly by connecting the unit to a computer used f or editing by means of a USB cab le (Windows) or 1394 cable (Apple Macintosh).* 1 (Connections : P age 77) *1 When the unit is connected to a computer with a 1394 cable , you can only read data from P2 cards but y ou cannot write data to P2 c[...]

  • Página 82

    82 6 Proceed with nonlinear editing using y our computer . An icon for the P2 card contents appears as a remov able disk in My Computer of your computer . For further details, ref er to the instructions for your computer’ s editing software. When replacing one card with another , if the USB connection is used, check that the access lamp is not ?[...]

  • Página 83

    Editing 83 Use an HDD (hard disk drive) that has sufcient capacity to permit copying. Before cop ying the data, f ormat the hard disk drive so that it can be used by the unit. Bear in mind that this process will delete all the data on the drive. Connect the camera to an HDD using the 1394 cable . (P age 78) Do not connect the camera to two or mo[...]

  • Página 84

    84 T o check the HDD status The color of indicates the HDD status, as below . White: HDD is connected and can be used. Black: HDD is not connected. Red: Copy cannot be made to the HDD since it is incorrectly formatted, etc. When the color is red, correctly format the HDD at step 5 before cop ying data onto it. T o check the data copied into the har[...]

  • Página 85

    Editing 85 W arnings HDD CAP A CITY FULL! There is not enough free memory on the HDD . T OO MANY P ARTITIONS! There are too many partitions.* 1 HDD DISCONNECTED! The HDD has been disconnected. CANNO T FORMA T! Initializing cannot be performed. T OO MANY T ARGETS! There are too many 1394 connection destinations. CANNO T ACCESS T ARGET! The connectio[...]

  • Página 86

    86 Dubbing Digital input/output Y ou can perform dubbing with a high image quality by means of digital signals b y using a 1394 cable to connect this unit to a digital video unit equipped with a 1394 connector . 1 Connect the digital video equipment to this unit. (Page 78) 2 Press the unit’ s mode button to s witch to the MCR mode. MODE CAM MCR P[...]

  • Página 87

    Displays 87 Screen displa ys Regular displays For details on the saf ety zone , refer to 38. USER - 1 I – P A US E S Q TC U ALC 83 % JUN 19 2008 23 : 59 : 5 9 60 : 24P F 5 .6 Z10 1 / 123 . 4 SP O T MF23 . . 5 f 4 t TC 12 : 34 : 56 : 00 106 min REM O T E P 3.2 K 1 8 dB D 1 0 X TEXT MEMO L O W LIGHT 1/64 1 2 HD1080i 1394 1394 A R 1 C H C H 2 [...]

  • Página 88

    88 3 A UT O/MANU AL switch operation displa y This display appears if a function which has been set on the setting menu A UT O SW screen is operating when the A UT O/MANU AL switch has been pressed. 4 Backup unit displa ys The status of the backup unit connected to the 1394 connector is display ed here. Nothing is display ed if in the setup menus, [...]

  • Página 89

    Displays 89 19 IRIS display In CAM mode, displa ys the F value during shooting. Only in the 480i D V format, the F value during shooting is also display ed during playbac k when ON was selected under CAMERA D A T A of the setting menu DISPLA Y SETUP screen. 20 Zoom position display The zoom poison is displa yed with Z00 (maximum wide-angle) - Z99 ([...]

  • Página 90

    90 33 Media remaining memory display Displays the remaining time . In P2 CARD REMAIN on the setting menu DISPLA Y SETUP screen, select T O T AL to display total remaining time f or all inserted cards or ONE-CARD (highlighted) to display the time remaining only on the card selected for recording. During MODE CHECK, it is possible to conrm the rem[...]

  • Página 91

    Displays 91 W arnings COPY INHIBITED Can not record correctly because of the input signal copy-guarded. EXTERNAL1394 DISCONNECT When the 1394 CONTROL item of the O THER FUNCTIONS screen of the Setup menu is set to EXT and recording without connecting external units with 1394 terminal, this display appears. INCOMP A TIBLE CARD The card cannot be use[...]

  • Página 92

    92 W ARNING When trouble occurs with camera systems , W ARNING is display ed. FOCUS LOCK (Abnormal focus operation) PSD NG (Abnormal vibration detected) GYRO NG (Abnor mal Optical Image Stabilizer control) 1394 This is display ed when trouble has occurred in the 1394 connections or signals. 1394 INITIAL ERROR (connection error) 1394 INPUT ERROR (in[...]

  • Página 93

    Displays 93 Setting the DISPLA Y items Display the f ollowing items on the vie wnder and LCD monitor screen by pressing the DISP/MODE CHK button or b y conguring OTHER DISPLA Y of the DISPLA Y SETUP screen of the setup menus. (P age 109) Displays MODE CHECK DISPLA Y O THER DISPLA Y settings ALL P ARTIAL OFF 1 Time code display ü — — — [...]

  • Página 94

    94 Using the setup menus Use the setup menus to change the settings to suit the scenes you are shooting or what y ou are recording. MENU PUSH-SET PAGE/AUDIO MON/VAR THUMBNAIL Operation lever MENU button Using the menus If the thumbnail menu is displa yed, press the THUMBNAIL button to release the displa y . (P age 66) The menu items indicated in th[...]

  • Página 95

    Menu 95 Initializing the menu settings The menu settings contain both the user le settings and the scene le settings. Y ou can initialize them separately . T o initialize the user le (i.e . all the settings other than the scene le settings) Select INITIAL in USER FILE of the O THER FUNCTIONS screen. The current menu settings of user [...]

  • Página 96

    96 Setup menu structure CAM (camera) mode menu CAMERA MENU SCENE FILE LOAD/SA VE/INIT (P ages 98 - 100) OPERA TION TYPE FRAME RA TE CAMERA SETUP ASPECT CONV MID GAIN SYNCRO SCAN (P age 100) SETUP HIGH GAIN DET AIL LEVEL A TW V DET AIL LEVEL SW MODE HANDLE ZOOM DET AIL CORING (P ages 101 - 10 3 ) IRIS DIAL CHR OMA LEVEL USER1 CHROMA PHASE A UT O SW [...]

  • Página 97

    Menu 97 Setup menu structure (continued) MCR (playbac k) mode menu MCR MENU RECORDING SETUP MCR FORMA T (P ages 104 - 106) 480i MCR MODE 1394 TC REGEN PLA YBACK FUNCTIONS AUDIO OUT TC MODE (P age 107) TCG TC PRESET A V IN/OUT SETUP CMPNT/SDI SEL 1394 UB REGEN (P ages 107 - 108) SDI OUT UB MODE SDI MET AD A T A UB PRESET SDI EDH 1394 IN PRESET DOWNC[...]

  • Página 98

    98 Setup menu list SCENE FILE screen Item Display mode Description of settings LO AD/SA VE/INIT (Camera) LO AD: Loads the scene le settings sav ed using SA VE. SA VE: Sav es the changed scene le settings. INITIAL: The settings of the scene le selected with the scene le dial are returned to the factory settings. OPERA TION TYPE (Camera) [...]

  • Página 99

    Menu 99 Item Display mode Description of settings DRS (Camera) Selects the DRS (Dynamic Range Stretcher) function. This function compresses the video signal lev el to extend the dynamic range making it possible to correctly render highlight areas without ov erexposure and loss of detail that would otherwise occur . OFF , 1, 2, 3 Larger values indic[...]

  • Página 100

    100 Item Display mode Description of settings V DET AIL FREQ (Camera) Sets the vertical detail for shooting in 480i progressiv e mode. THIN: Makes the detail thin. MID: Makes the detail slightly thick er . THICK: Makes the detail thick er . When images were shot in the progressiv e mode in which the vertical detail is set as “THIN” or “MID”[...]

  • Página 101

    Menu 101 SW MODE screen Item Display mode Description of settings MID GAIN (Camera) Sets the gain value assigned to the M position of the GAIN switch. 0dB, 3dB, 6dB, 9dB, 12dB HIGH GAIN (Camera) Sets the gain value assigned to the H position of the GAIN s witch. 0dB, 3dB, 6dB, 9dB, 12dB A TW (Camera) Sets the operation of the A TW (A uto T rac king[...]

  • Página 102

    102 Item Display mode Description of settings USER1 (Camera) Selects the function assigned to the USER1 button. REC CHECK: P erforms Rec Check. SPO TLIGHT: Auto iris control f or the spotlight ON/OFF . BA CKLIGHT: Auto iris control f or the backlight compensation. (Page 42) BLA CKF ADE: Blackf ade (P age 42) WHITEF ADE: Whitefade (P age 42) A TW: A[...]

  • Página 103

    Menu 103 Item Display mode Description of settings FOCUS ASSIST (Camera) Allocates a function to the FOCUS ASSIST button. EXP ANDED: Magnies the center por tion of the image. GRAPH: Displays a frequency distribution g raph at the top right in the viewnder and LCD monitor . BO TH: Magnies the center por tion of the image and displays a hist[...]

  • Página 104

    104 Item Display mode Description of settings A GC (Camera) Sets the A uto Gain Control when the ON is selected in A.IRIS. 6dB: P erforms the Auto Gain Control (max. 6 dB) in auto mode. 12dB: P erforms the Auto Gain Control (max. 12 dB) in auto mode. OFF: Does not perform the Auto Gain Control in auto mode . Initiates the control of the gain select[...]

  • Página 105

    Menu 105 Item Display mode Description of settings MIC GAIN 2 (Camera) Sets the input le v el of the external microphone connected to the INPUT 2 terminal. (P age 51) -50dB, -60dB 25M REC CH SEL (Camera) Selects the recording audio channel for D VCPRO and D V formats. (P age 51) 2CH, 4CH <Notes> Even when 4CH is selected as this item’ s set[...]

  • Página 106

    106 Item Display mode Description of settings UB MODE (Camera) (MCR) Set the content for user inf ormation. USER: Records the information of user . TIME: Records the time at recording. D A TE: Records the date at recording. TCG: Records the values of the time code generator . FRM. RA TE: Records the frame rate inf ormation for frame conv ersion. a [...]

  • Página 107

    Menu 107 PLA YBA CK FUNCTIONS screen Item Display mode Description of settings A UDIO OUT (MCR) Sets the audio signals to output from the A UDIO OUT pin jack when the P2 card or the tape is play ed back. CH1 · CH2: CH1 output = CH1 signals, CH2 output = CH2 signals CH1: CH1 output = CH1 signals, CH2 output = CH1 signals CH2: CH1 output = CH2 signa[...]

  • Página 108

    108 Item Display mode Description of settings INT MIC (Camera) Determines whether or not input from the inter nal microphone is used during recording. ON: Uses internal microphone input. OFF: Does not use internal microphone input. DISPLA Y SETUP screen Item Display mode Description of settings ZEBRA DETECT 1 (Camera) Selects the brightness lev el [...]

  • Página 109

    Menu 109 Item Display mode Description of settings O THER DISPLA Y (Camera) (MCR) Select how much inf ormation to display on the screen. (Page 9 3 ) OFF , P ARTIAL, ALL CAMERA D A T A (MCR) When set to ON, camera-recorder data (image stabilizer , aperture, gain value) made during shooting is displa yed in pla yback of clips recorded in the D V form[...]

  • Página 110

    110 Item Display mode Description of settings SD CARD FORMA T (Camera) Formats the SD memor y cards. O THER FUNCTIONS screen Item Display mode Description of settings USER FILE (Camera) (MCR) LO AD: Loads the settings in a previously stored user le . SA VE: Sav es the updated user le settings. INITIAL: Returns the user settings in the user ?[...]

  • Página 111

    Menu 111 Item Display mode Description of settings A CCESS LED (Camera) (MCR) Sets the access lamp to ON or OFF . ON: The lamp lights up and blinks as per the regular specications. OFF: The lamp is OFF in all circumstances. REC LAMP (Camera) Sets lighting of the tally lamp . OFF: The tally lamp does not light. FRONT : F ront tally lamp (micropho[...]

  • Página 112

    112 Item Display mode Description of settings PO WER SA VE (Camera) Selects the power-saving mode when the Operation le v er , MENU button, THUMBNAIL button, P AGE/A UDIO MON/V AR button, DISP/ MODE CHK button, USER1-3 b uttons and EVF DTL button hav e not been operated f or 5 minutes or so . ON: The camera-recorder’ s power is set to OFF . OFF: [...]

  • Página 113

    Reference 113 Bef ore calling for service P ower suppl y There’ s no power . Make sure the battery and AC adapter are connected properly . Check the connections again. • P16 P ower shuts off f or no apparent reason. T o prevent the battery from running down needlessly , the camera- recorder automatically turns off when the camera-recorder has b[...]

  • Página 114

    114 Before calling f or service (continued) Shooting Cannot star t shooting. Make sure the PO WER switch is ON. • P19 Cannot focus automatically . Y ou can focus automatically when the auto f ocus mode is selected. Y ou may be shooting a scene where it is difcult to bring the subject into focus in the auto f ocus mode. If this is the case, f o[...]

  • Página 115

    Reference 115 Playbac k Cannot play e v en when I press the play b utton. Make sure the MCR lamp is on (press the mode b utton). No kind of playbac k operation can be perf ormed unless this lamp is on. • P6 3 Mosaic-like noise appears when I cue or revie w a tape. This noise is inherent to digital video technology . This is normal. • —— Ima[...]

  • Página 116

    116 Operating precautions Do not allow an y water to get into the camera- recorder when using it in the rain or sno w or at the beach. F ailure to heed this precaution will cause the camera-recorder or P2 card to malfunction (and may result in irrepar able damage). Keep the camera-recor der away fr om equipment (such as TV sets and video game machi[...]

  • Página 117

    Reference 117 What to remember when thro wing memory cards a way or transferring them to others Formatting memory cards or deleting data using the functions of the unit or a computer will merely change the le management information: it will not completely erase the data on the cards. When throwing these cards a way or tr ansferring them to other[...]

  • Página 118

    118 Updating the driver in the camera For the latest inf ormation on drivers, visit the P2 Support Desk at the following W eb sites. https://eww .pavc.panasonic.co.jp/pr o-av/ T o update a dr iver , select PROPERTY on the thumbnail menu and then SYSTEMINFO to chec k the camera-recorder’ s v ersion, go to the site given abov e, and do wnload the d[...]

  • Página 119

    Reference 119 Cleaning When cleaning, do not use benzene or thinner . Using benzine or paint thinners may def orm the camera-recorder and/or cause the surf ace nish to peel off. Before proceeding with maintenance , remov e the battery or disconnect the AC cord from the power outlet. Use a soft, clean cloth to wipe the camera- recorder . T o remo[...]

  • Página 120

    120 Storage Precautions Before storing the camera-recorder , remove the battery . Store all of these items in a place with low humidity and relatively constant temper ature. [Recommended temperature range: 15°C to 25°C] [Recommended relative humidity: 40% to 60%] Video camera Wrap the video camera in a soft cloth to k eep the dust off. Battery Th[...]

  • Página 121

    Reference 121 How to handle data recor ded on P2 cards The P2 card is a semiconductor memory card that is used as the recording medium in the professional video production and broadcasting devices that mak e up the D VCPRO P2 Series. Since data recorded in the D VCPRO P2 format are in a le f or mat, they ha ve e xcellent compatibility with PCs. [...]

  • Página 122

    122 Chec kpoints for using memory car ds In this unit, use SD memory cards that are compatible with the SD or SDHC standard. When using miniSD or miniSDHC cards in this unit, be sure to use the special adapter . (The unit will not operate correctly if only the adapter is inserted. Alw ays insert a memor y card into the adapter .) Cards y ou can use[...]

  • Página 123

    Reference 123 Recor ding format list F rame rate 60 30P 24P 24P A Video format D VCPRO HD 1080i/60i 1080i/60i 1080i/30P ov er 60i 1080i/24P ov er 60i 1080i/24P A ov er 60i 720P/60P 720P/60P 720P/30P ov er 60P 720P/24P ov er 60P — 720P/30PN 720P/60P Native recording 720P/30PN 720P/24P Native recording — 720P/24PN 720P/60P Native recording 720P/3[...]

  • Página 124

    124 Appendix When a P2 card with a memory capacity of 8 GB or more is used in this unit and a one-time continuous recording e xceeds the prescribed duration (appro x. 5 minutes f or D VCPRO HD , approx. 10 minutes f or D VCPRO50 or appro x. 20 minutes f or D VCPRO or D V) or when a one- time recording extends o ver more than one P2 card, the record[...]

  • Página 125

    Reference 125 Specications [GENERAL] Supply v oltage: DC7.2 V/7.9 V P ower consumption 10.9 W (when the LCD monitor is not used) 11.7 W (when the LCD monitor is used) 13.8 W (max.) indicates safety inf ormation. Ambient operating temperature 0 °C to 40 °C (32 °F to 104 °F) Ambient operating humidity 10% to 85% (no condensation) W eight 1.9 k[...]

  • Página 126

    126 [A UDIO P2] (D VCPRO HD 1080i 720P) Sampling frequency 48 kHz Quantizing 16 bit/4 CH Frequency response 20 Hz to 20 kHz [MEMOR Y CARD] Video recording f ormats: D VCPRO HD 1080i/60i (30P ov er 60i, 24P ov er 60i, 24P A ov er 60i) 720P/60P (30P ov er 60P , 24P over 60P) 720P/30PN (Native recording) 720P/24PN (Native recording) D VCPRO50/D VCPRO/[...]

  • Página 127

    Reference 127 [A C ADAPTER] P ower Source: 100-240 V AC , 50/60 Hz 24 W P ower Output: 7.9 V DC, 1.9 A (Video Camer a) 8.4 V DC, 1.2 A (Charge) indicates safety inf ormation. W eight 160 g (0.35 lb) Dimensions (W x H x D) 70.0 mm x 44.5 mm x 116.0 mm (2-3/4 inches x 1-3/4 inches x 4-9/16 inches) Weight and dimensions are appro ximate. Specicatio[...]

  • Página 128

    Information on Disposal in other Countries outside the Eur opean Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask f or the correct method of disposal. P anasonic Broadcast & T elevision Systems Compan y Unit Company of P anasonic Corporation of No[...]