Mitsubishi Electronics MIM-G01 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Mitsubishi Electronics MIM-G01. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Mitsubishi Electronics MIM-G01 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Mitsubishi Electronics MIM-G01 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Mitsubishi Electronics MIM-G01, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Mitsubishi Electronics MIM-G01 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Mitsubishi Electronics MIM-G01
- nombre de fabricante y año de fabricación del dispositivo Mitsubishi Electronics MIM-G01
- condiciones de uso, configuración y mantenimiento del dispositivo Mitsubishi Electronics MIM-G01
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Mitsubishi Electronics MIM-G01 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Mitsubishi Electronics MIM-G01 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Mitsubishi Electronics en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Mitsubishi Electronics MIM-G01, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Mitsubishi Electronics MIM-G01, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Mitsubishi Electronics MIM-G01. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    Mitsubishi MIM series Industr ial Modems Instr uctions Manu al MIM-G01 MIM-A01 INDUSTRIAL AUTOMATION MIT SU BI S HI ELE C TRI C Art.-No.: 165584 27 10 2005 Version A MI T SU BI S HI ELE C TRI C Draft[...]

  • Página 2

    [...]

  • Página 3

    About this Manual The te xts, illustr ations, diag rams and e xamples in this manual are only intended as aids to help e xplain the functioning, operation, use and programming of the Mitsubishi Industrial Modems (MIM). If you ha v e any questions regarding the installation and oper ation of the software described in this manual, please do not hesit[...]

  • Página 4

    [...]

  • Página 5

    Mitsubishi Industrial Modem i Instruction Manual Industrial Modems MIM-A01 and MIM-G0 Art-No.: 165584 Version Changes / Additions / Corrections A 10/2005 pdp-ck First Edition[...]

  • Página 6

    II MITSUBISHI ELECTRIC[...]

  • Página 7

    Security Advice Intended T ar g et A udience This manual is aimed exclusively at suitably qualified electrical engineering specialists that are familiar with the safety standards required for electrical engineering and automation. The engi - neering, installation, commissioning, maintenance and testing of devices must only be carried out by qualifi[...]

  • Página 8

    IV MITSUBISHI ELECTRIC[...]

  • Página 9

    Contents Mitsubishi Industrial Modem V 1 Mitsubishi Industrial Modems at a glance 1.1 Mitsubishi Nor mal Modem GSM (MIM-G01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.2 Mitsubishi Super Modem 56k (MIM-A01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 2 Equipment V ersions 2.1 Modem T yp . . . . . . . . . .[...]

  • Página 10

    Contents VI MITSUBISHI ELECTRIC 6 Configuration 6.1 MIM and Mitsubishi ALPHA XL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 6.1.1 Project Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 6.1.2 Function Block SMS send . . . . . . . . . . . . . . . . . . . . . .[...]

  • Página 11

    1 Mitsubishi Industrial Modems at a glance 1 . 1 Mitsubishi Normal Modem GSM (MIM-G01) The Mitsubishi Normal Modem GSM is a generic modem for industrial usage, e.g. for remote maintenance of PLCs. It needs a SIM card and logs on the mobile network like mobile phone. The Mitsubishi controller Alpha XL can - using this modem and a special functional [...]

  • Página 12

    2 Equipment Versions 2 . 1 Modem T yp The Mitsubishi Normal Modem GSM requires, like any conventional modem, a software in the PC like a program for dial-up connection or for tje sending and receiving of fax messages. A Mitsubishi Super Modem however sends all data by using simple AT commands. No additionally software is required in this case. 2 . [...]

  • Página 13

    3 Mounting and Installation 3 . 1 Normal Modem GSM (MIM-G01) The MIM-G01 is a GSM/GPRS mobile modem intended for transmission of data, SMS, e-mail and fax messages within the 900 MHz and 1800 MHz GSM mobile networks and complies to the high speed standard of GPRS Class 10. It is suitable for DIN-Rail mounting inside control boxes. 3 . 1 . 1 Interfa[...]

  • Página 14

    3 . 1 . 2 Meaning of the LEDs The MIM-G01 presents two LEDs, which indicate the devices current operating mode. After the power supply has been switched on, a self test will be executed. The end of this test is indicated by a acoustic signal (short beep). After the test, the device tries to make a connection to the GSM network. The green LED will f[...]

  • Página 15

    3 . 1 . 3 Connecting the GSM antenna First of all find a suitable location for mounting the GSM antenna outside of the control cabinet. Screw the antenna plug into the antenna socket on the front of the modem. NO TES Standard GSM antennas with an FME plug can be used. The GSM antenna is not supplied with the modem and can be ordered separately . If[...]

  • Página 16

    NO TE If you plan to dial into your PLC via GSM, y ou will possibly need a SIM card and account with data ser vice enabled. Howe ver , in some cases the modem may be capab le of accepting data calls on a voice n umber after using the A T+CICB=0 command. For detailed inf or mation, contact your mobile service provider . E A TTENTION: The SIM card sh[...]

  • Página 17

    3 . 2 Super Modem 56k (MIM-A01) The MIM-A01 is a PSTN modem intended for transmission of data, SMS, e-mail and fax mes - sages by analog telephone networks and complies to the high speed standard of V.90 and 56k. It is suitable for DIN-Rail mounting inside control boxes. 3 . 2 . 1 Interfaces and Connectors NO TE For connecting the modem to a PC, a [...]

  • Página 18

    3 . 2 . 2 Meaning of the LEDs The MIM-A01 got five LEDs, which display the modems operating status. After the power supply has been switched on, a self test will be executed. The end of this test is indicated by a acoustic signal (short beep). Super Modem 56k (MIM-A01) Mounting and Installation 3-8 MITSUBISHI ELECTRIC COM1 (RS232) -+ DC 10...30V Se[...]

  • Página 19

    3 . 2 . 3 Connection to the T elephone Network Connection to telephone network (PSTN) is established via the included telephone cable and the "Line" jack of the MAM. To get access to your Mitsubishi Super Modem 56k, the telephone number of the connection used must be known. 3 . 2 . 4 T esting the T elephone Connection In order to check th[...]

  • Página 20

    3 . 3 Mounting Mount the modem by pushing or snap fitting it onto a DIN rail (top-hat rail 35 mm). E A TTENTION : P D ANGER: Mounting Mounting and Installation 3-1 0 MITSUBISHI ELECTRIC Antenna 027954 541034 - + 10...40 V DC SIM-Card Push Status GSM Power Fig. 3-9: Pull out the blac k tab on the device using a screwdriver and so the de vice can sna[...]

  • Página 21

    4 Power supply After all installation steps are completed, switch on the power supply to the Mitsubishi Alarm Modem. The modem got two power supply connectors: Two screw terminals and a power sup - ply jack (pin diameter 2,1 mm, inner diameter 6 mm). E A TTENTION: P ower U = 10 – 40V DC! for Mitsubishi Normal Modem (MIM-G01) P ower U = 10 – 30V[...]

  • Página 22

    5 Operation If you have followed the steps in the chapters 3 and 4, your modem is ready for operation. 5.1 M I M- G0 1 The MIM-G01 presents two LEDs, which indicate the devices current operating mode. After the power supply has been switched on, a self test will be executed. The end of this test is indicated by a acoustic signal (short beep). After[...]

  • Página 23

    6 Configuration 6 . 1 MIM and Mitsubishi ALPHA XL Configuration of the Industrial Modems is done vi a the Mitsubishi Alpha Programming Software (SW0D5-ALVLS-EUL). Detailed information on selecting the modem and setting parameters is to be found within the Mitsubishi Alpha XL manuals at http://www.mit subishi-automation.com Alpha XL - Communication [...]

  • Página 24

    6 . 1 . 2 Function Bloc k SMS send For sending SMS, add a function block G SM/SMS is to be added to your PLC project. (Detailed information is to be found within the Alpha XL Communication manual.) Double-click the GSM function block in order to configure it. In the window that opens, click Setting and enter these data: Now enter the following data[...]

  • Página 25

    Recipient: Enter several recipients with name and number here. Enable the Mobile Phone button for SMS and Gateway for e-mail. Click on OK to return to the previous menu. Select one of the recipients here. NO TE If you selected Gateway instead of Mobile Phone , you ma y enter an e-mail address for this user . Note that the appropriate number must be[...]

  • Página 26

    6 . 1 . 3 PLC Connection Connect the RS232 jack to the ALPHA XL, using the GSM-CAB. If done so, plug the power supply into the appropriate terminal. NO TE Make sure the SIM card is inser ted correctly and po wer on both the de vices. In case the PIN is set correctly , the MIM-G01 will connect to t he PLC and logs onto the GSM network. The Modem is [...]

  • Página 27

    6 . 2 MIM and Mitsubishi MELSEC FX The modem may be operated along with MELSEC FX in two ways: As GSM modem for "FX Messenger" or as modem for FX remote access. 6 . 2 . 1 MIM-G01 and FX Messenger In order to connect the MIM-G01 to a FX1S Messenger, the modem must be initialized with the following init string, which sets the handshake mode[...]

  • Página 28

    6 . 4 RS 232-T ransparent-Mode (T ransMode) The section is only valid for the Mitsubishi Super Modem (MIM-A01). The TransMode allows the remote control of a control unit (PLC) or another RS-232 device via a Mitsubishi Super Modem as if you were sitting near the device and connected locally via RS 232. All commands that you can give to this device v[...]

  • Página 29

    6 . 4 . 2 T ransMode Command 6 . 4 . 3 T ransMode Login Command To use the TransMode of the Mitsubishi Super Modem, these prerequisites must be met 쎲 The Mitsubishi Super Modem must be connected to a working telephone connection. That means you m ust be able t o call it. (check first using a telephone) 쎲 Call ans wering on the Mitsubishi Super [...]

  • Página 30

    Login without parameters [password] Login with password [ ] Login without password Login with passw ord and parameters [password; Format:format; Handshake:handshake; Keep:timeout; Baudrate: RS232Speed] For a description of the parameters, see Section 6.4.2 The configuration of the Mitsubishi Super Modem should be done locally during set-up, tested [...]

  • Página 31

    7 Technical Data Main Features System Arc hitecture T elephone- /GSM Network Technical Data Mitsubishi Industrial Modem 7-1 Features MIM-G01 MIM-A01 Fax Via Fax-to-Fax-Gateway Send text messages to fax machines SMS Send and receive SMS (GSM and GPRS Mode) Send and receive SMS E-Mail Via SMS-to-E-Mail-Gateway Send and receive E-Mail (SMTP/POP3) Expr[...]

  • Página 32

    Firmware General Data Technical Data 7-2 MITSUBISHI ELECTRIC Features MIM-G01 MIM-A01 Operating System — Commercial RTOS (real-time multitasking operating system) with C++ abstraction layer File System — Commercial DOS-compliant flash file sys - tem with C++ abstraction layer T ab. 7-4: Fir mw are Features MIM-G01 MIM-A01 Power Supply 10...40VD[...]

  • Página 33

    7 . 1 Dimensions 7 . 1 . 1 MIM-G01 Technical Data Dimensions Mitsubishi Industrial Modem 7-3 Push -+ RS 232 88 Antenna 10...40 V DC Pow er Status GSM N GSM ORMAL MODEM NORMAL MODEM GSM with 1x Rs232 10 - 40VDC, max. 0.7 A 4 027954 541034 91 4,3 71 58 13 4 6 SIM-Card Push Fig. 7-1: Dimensions[...]

  • Página 34

    7 . 1 . 2 MIM-A01 Dimensions Technical Data 7-4 MITSUBISHI ELECTRIC COM1 (RS232) -+ DC 10...30V 88 Service Pow e r Line Mail in Modem Mode Mail out S UPER MODEM 56k SUPER MODEM 56k with 1x RS232 10 - 30VDC, max. 0.7 A 4 027954 541034 91 4,3 58 46 Fig. 7-2: Dimensions[...]

  • Página 35

    8 Appendix 8 . 1 A T Commands MIM-G01 This chapter describes the most important MIM-G01 AT modem commands. Detailed informa - tion on these may be obtained from www.mitsubishi-automation.de. 8 . 1 . 1 Impor tant A T Commands +CPIN – PIN This command requests the PIN status and enters the PIN/PUK. Defined parameters: <pin> 4...8 digit PIN &l[...]

  • Página 36

    +CNUM – Own Number This Command sets the own number (MSISDN) of the SIM card for any service. Defined parameters: <alphax> name for the number <numberx> <numberx> number in format determined by <typex> <typex> type of adresse-byte in integer format Example: +CNUM :"Phone", "0612345678",129 +CNUM :[...]

  • Página 37

    + I C F–D a t aF o r m a t This Command sets data format of serial interface. Defined parameters: <format> <parity> <format> <parity> 1: 8 Data 2 Stop 0: Odd 4: 7 Data 2 Stop 3: Space 2: 8 Data 1 Parity 1 Stop 1: Even 5: 7 Data 1 Parity 1 Stop 4: None 3: 8 Data 1 Stop 2: Mark 6: 7 Data 1 Stop If <format> is 1, 3, 4 o[...]

  • Página 38

    +COPS – GSM Network This command requests accessible networks and sets the GSM home network. Defined parameters: <mode> <format> : 0: automatic (standard) Format of <oper> parameters 1: manual 0: long alphanumeric format 2: logoff; device is logged off until 1: short alphanumeric format <mode>=0 or 1 is selected. 2 : numer[...]

  • Página 39

    8 . 1 . 2 Overview of A T -Commands Service Commands V24-V35 Commands Appendix AT Commands MIM-G01 Mitsubishi Industrial Modem 8-5 Command Description +CLIR Calling Line Identification (Transmission of the phone number) +CLIP Calling Line Identification (Display of the phone number of the caller) +COLP Connected Line Identification +CAOC Advice Of [...]

  • Página 40

    Dial Commands General Commands Network Security AT Commands MIM-G01 Appendix 8-6 MITSUBISHI ELECTRIC Command Description D Dial command H Hang-up Command A Answer a Call +CEER Extended Error Report +VTD, +VTS DTMF Signals ATDL Redial Last Telephone Number AT%Dn Automatic Dialing with DTR ATSO Automatic Answer +CICB Incoming Call Bearer T ab. 8-12: [...]

  • Página 41

    Phonebook SMS Commands Data Commands Appendix AT Commands MIM-G01 Mitsubishi Industrial Modem 8-7 Command Description +CPBS Select Phone Book Memory +CPBR Read Phone Book Entries +CPBF Find Phone Book Entries +CPBW White Phone Book Entry +CPBP Phone Book Phone Search +CPBN Move Action in Phone Book +CNUM Subscriber Number +WAIP Avoid Phone Book Ini[...]

  • Página 42

    Fax Commands CLASS1 Fax Commands CLASS2 Special A T Commands AT Commands MIM-G01 Appendix 8-8 MITSUBISHI ELECTRIC Command Description +FTM Transmit Speed +FRM Receive Speed +FTH HDLC Transmit Speed +FRH HDLC Receive Speed +FTS Stop Transmission and Wait +FRS Receive Silence T ab. 8-19: F ax Commands CLASS1 Command Description +FDT Transmit Data +FD[...]

  • Página 43

    8 . 2 A T Commands MIM-A01 8 . 2 . 1 Overview of A T Commands Commands can be entered alone or in strings, and they must be preceded - except the A/ com - mand - by the character sequence AT (or at) and ended with the content of the S3 register, which usually is <CR/LF>. For example: ATX1<CRLF> ATQ0<CRLF> The maximum length of a c[...]

  • Página 44

    8 . 2 . 2 A T Command Descriptions This chapter describes the most important AT commands of the modem. The values marked with an asterisk (*) are the default values. +TFORMA T - Sets the data format Sets the data format of the serial interface. +TFORMAT=" Dataformat " Dataformat : DatabitsParityStopbits Databits : 8, 7 Parity : N (none), [...]

  • Página 45

    D - Dial Command This command causes the modem to immediately go off-hook as an originating modem and dial a telephone number with corresponding dial modifiers. Dial modifiers are parameters that define how the modem should dial the telephone number. Dial Modifiers 0-9 Dialling Digits A, B, C, D, *, # Tone Dial Characters P Pulse Dial: configures t[...]

  • Página 46

    &W - Store Active Profi le This command causes the modem to store a subset of the active profile command and S-regis - ter configurations into the NVRAM user profile ‘n’. &W0* Store in user profile 0 &W1 Store in user profile 1 +VCID - Caller ID Setti ngs The +VCID=n command controls the reporting and presentation of data associated[...]

  • Página 47

    8 . 2 . 4 Message Commands In Message Mode, you can send this extended command set to the modem. If you use this command in Modem Mode, an error will occur. Overview of the Commands Overview of the Commands AT+T Send="All; ..." sets general send parameters AT+T Send="SMS; ..." sends an SMS message (depending on device) AT+T Send[...]

  • Página 48

    8 . 2 . 5 A T+T Send - Sending SMS, E-Mail, F ax and Express E-Mail Messages Setting General Message P arameters Sending a Fax AT Commands MIM-A01 Appendix 8-1 4 MITSUBISHI ELECTRIC AT+T Send="All;..." AT+T Send="ALL; DialPrefix:nnn; ModemName:Name; ModemNumber:number End:char" This command sets the parameters that are common to[...]

  • Página 49

    Sending an SMS Message Appendix AT Commands MIM-A01 Mitsubishi Industrial Modem 8-1 5 AT+T Send="SMS;..." AT+T Send="SMS; To: recipient; ServiceCentreNumber: SCNumber; Type: Protocol" >MessageText ><CTRL>+<Z> This command sends an SMS message or sets the parameters. When you close the command line by pressing &[...]

  • Página 50

    Sending an Express E-Mail AT Commands MIM-A01 Appendix 8-1 6 MITSUBISHI ELECTRIC AT+T Send="Express;..." AT+T Send="Express; To: Recipient; Dial: Number;From: Sender" >Subject >MessageText line#1 >MessageText line#n ><CTRL>+<Z> This command sends an Express E-Mail or sets the parameters. When you have clo[...]

  • Página 51

    Sending Internet E-Mail (SMTP) Appendix AT Commands MIM-A01 Mitsubishi Industrial Modem 8-1 7 AT+T Send="Email;..." AT+T Send="Email; To: Recipient ; Dial: Number; From: Sender; Flags: flag PPPUser: User; PPPPassword: Password; SMTPMailServer: SMTPServer " >Subject > MessageText line# 1 > MessageText line# n ><CTR[...]

  • Página 52

    Retrieving Internet E-Mail (POP3) AT Commands MIM-A01 Appendix 8-1 8 MITSUBISHI ELECTRIC AT+T Send="POP3;..." AT+T Send="POP3; Dial: Number;PPPUser: ISP user;PPPPassword: ISP-PW; Flags:Flag; Username: Mailbox; Password: MailPW; POP3MailServer: POP3server“ >START ><CTRL>+<Z> This command tests the specified mailbox[...]

  • Página 53

    8 . 2 . 6 Message Commands A T+TList - Displaying Received Messages A T+T Delete - Deleting a Stored Message Appendix AT Commands MIM-A01 Mitsubishi Industrial Modem 8-1 9 AT+T List = "type" Displays a list of all received messages of the indicated message type. Type: The type of the messages to be displayed. The following types are sup -[...]

  • Página 54

    A T+T Read - Reading a Stored Message AT Commands MIM-A01 Appendix 8-2 0 MITSUBISHI ELECTRIC AT+T Read=Number.. Lists the message with the indicated ID from the memory of the modem. The message is not deleted and can be read as often as you want. Number: Number of the message to be read. This number can be determined using the List command. To read[...]

  • Página 55

    8 . 2 . 7 Modem Commands A T+T Answer - Setting the Response Beha viour A T+T Time - Setting the System Time Appendix AT Commands MIM-A01 Mitsubishi Industrial Modem 8-2 1 AT+T Answer="OnOff" Switches the modem’s call answering on or off. This is necessary to receive messages. OnOff: On Call answering on (default) Off Call answering off[...]

  • Página 56

    Reading the Current System Time A T+T Echo - Switc hing the Echo On or Off A T+T V erbose - Switching Comprehensive Responses On or Off AT Commands MIM-A01 Appendix 8-2 2 MITSUBISHI ELECTRIC AT+T Time? Displays the system time of the modem AT+T Time? Modem reply: +T Time: 2003/1/24,12:17:00,+0100 OK AT+T Echo="OnOff" Switches the echo for[...]

  • Página 57

    A T+T Mode - Activating Modem Mode or Messa ge Mode A T+T Help - Showing a Command Overview A T+T Erase - Resetting the Modem AT + T R e d i a l Appendix AT Commands MIM-A01 Mitsubishi Industrial Modem 8-2 3 AT+T Mode="Mode" Sets the operating mode of the modem. ModemMode: The modem works like a “normal” modem. The standard Hayes AT c[...]

  • Página 58

    A T+T RedialDela y A T+T DialRules - Dial Method, Dial T one Detection AT Commands MIM-A01 Appendix 8-2 4 MITSUBISHI ELECTRIC AT+T RedialDelay Sets the time to wait between redial attempts. Delay 60...600 delay in seconds (default=90) Example: AT+T RedialDelay="120" Modem reply: OK AT+T RedialDelay? Displays the time to wait between redia[...]

  • Página 59

    A T+ T Speaker - Adjusting the Modem Speaker V olume Appendix AT Commands MIM-A01 Mitsubishi Industrial Modem 8-2 5 AT+T Speaker="Volume" Sets the volume level of the modem speaker. Volume: Volume switches the speaker off Min low volume level (default) Middle medium volume level Max maximum volume level Example: AT+T Speaker="Middle&[...]

  • Página 60

    Index i Mitsubishi Industrial Modem Inde x A Antenna cabl e· · · · · · · · · · · · · · · · · · · · · 3-5 connecting · · · · · · · · · · · · · · · · · 3-5 connection · · · · · · · · · · · · · · · · · 3-3 A T Commands MIM G 01 · · · · · · · · · · · · · · · · · · 8-1 MIM- A01 · [...]

  • Página 61

    [...]

  • Página 62

    MI T SU BI S HI ELE C TRI C HEADQUARTERS MITSUBISHI ELECTRIC EUROPE EUROPE B.V. German Branch Gothaer Straße 8 D-40880 Ratingen Phone: +49 (0) 2102 / 486-0 Fa x: +49 (0) 2102 / 486-1120 e mail: megfamail@meg.mee.com MITSUBISHI ELECTRIC FRANCE EUROPE B.V. French Branch 25, Boulevard des Bouvets F-92741 Nanterre Cedex P h o n e :+ 3 315 56 85 56 8 F[...]