Español dropdown-ico

Maxtor ELX8-60 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69

Ir a la página of

manuales de instrucciones parecidos

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Maxtor ELX8-60. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Maxtor ELX8-60 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Maxtor ELX8-60 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Maxtor ELX8-60, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Maxtor ELX8-60 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Maxtor ELX8-60
- nombre de fabricante y año de fabricación del dispositivo Maxtor ELX8-60
- condiciones de uso, configuración y mantenimiento del dispositivo Maxtor ELX8-60
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Maxtor ELX8-60 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Maxtor ELX8-60 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Maxtor en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Maxtor ELX8-60, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Maxtor ELX8-60, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Maxtor ELX8-60. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    ELX8 - 60 Installation Guide (v 1.0 a )[...]

  • Página 2

    FCC Compliance Statement Caution : Any changes or modifications in construction of this device which are not expressly approved the party re sponsible for compliance could void the user's authority to operate the equipment. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part [...]

  • Página 3

    Important Notice 1. D o not p lace heavy objects on the top of the ELX8 - 60 . 2. ELX8 - 60 is not weatherproof. In case of outdoor use, equip a weatherproof case to protect ELX8 - 60 from water, moisture, or temperature (higher or lower than specificat ion s ). To clean the ELX8 - 60 , gently wipe the outside with a clean dry cloth. 3. Be sure to [...]

  • Página 4

    ELX8 - 60 TABLE OF CONTENTS 4 2003. 08. 13 (v 1.0) Rugged CCTV OVERVIEW ................................................................................................................................................................ .. 7 1. What is ELX8 - 60? ..........................................................................................[...]

  • Página 5

    TABLE OF CONTENTS ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 5 8.3. Setting Recording Condition ................................................................................................ ......... 24 8.3.1. Configuration Status ................................................................................................................ 25 [...]

  • Página 6

    ELX8 - 60 TABLE OF CONTENTS 6 2003. 08. 13 (v 1.0) Rugged CCTV 16.3. Uninstalling D VR Manager ................................................................................................ ........ 43 16.4. Configstation ..............................................................................................................................[...]

  • Página 7

    OVERVIEW ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 7 OVERVIEW 1. What is ELX8 - 60 ? The ELX8 - 60 is an 8 - a nalog channel s network digital video recorder. Video, Audio, and Text Event - Logs are digitized and stored on two internal h ard - drives. Key features q 8 analog video channels q 1 channel audio recording & playback q Max. 60 / 50 [...]

  • Página 8

    ELX8 - 60 OVERVIEW 8 2003. 08. 13 (v 1.0) Rugged CCTV 2. Supplied Accessories Unpack and check all the items as below. 1. ELX8 - 60 (1) 2. DC Power Supply (1) (110V~220V) 3. AC Power Cord (1) 4. CD - ROM (Including D VR Manager) (1) 5. Remote Controller (1) 6. Guide (2) 7. Plug Bracket (1) 8. HDD Fixing Screw (8)[...]

  • Página 9

    OVERVIEW ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 9 3. Description & Function ELX8 - 60 Front (1) LED (2) IEEE1394 connecter (3) Remote co ntroller receiver (4) USB connecter (5) Function buttons (6) Bracket fixing hole for rack mount[...]

  • Página 10

    ELX8 - 60 OVERVIEW 10 2003. 08. 13 (v 1.0) Rugged CCTV ELX8 - 60 Rear (7) Power switch (8) Ethernet connector (9) BNC connector for Video input (10) Audio input / output connector (11) RS232 connecter (9Pin D - Sub) (12) Terminal block for RS232 & 422/485 (13) Terminal block for Sensor input (14) Terminal block for Relay output (15) Video outpu[...]

  • Página 11

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 11 INSTALLATION AND CONNECTION 4. Connecting & Running ELX8 - 60 4.1. Connecting camera (1) Set video type (NTSC/PAL) by rear panel ’ s switch. (2) Connect CCTV camera to ELX8 - 60 with BNC cable as shown below . <Note> The video type for all channels should be eithe[...]

  • Página 12

    ELX8 - 60 INSTALLATION AND CONNECTION 12 2003. 08. 13 (v 1.0) Rugged CCTV 4.2. Connecting Monitor (1) Connect CCTV monitor to ELX8 - 60 with BNC cable as shown below . <Note> ELX8 - 60 has two video output ports ; for Monito r and VCR. The output signals from the two ports are same and either port may be used . 4.3. Connecting Audio (1) Conne[...]

  • Página 13

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 13 4.4. Supplying Power (1) Connect power cable to ELX8 - 60 . (2) Turn on the power switch located on the ELX8 - 60 rear panel. <Note> Use the plug bracket to secure the power cable if needed. <Note> To connect EARTH, refer to the following picture.[...]

  • Página 14

    ELX8 - 60 INSTALLATION AND CONNECTION 14 2003. 08. 13 (v 1.0) Rugged CCTV 5. Running OSD menu 5.1. Using menu P ress the [MENU] button to open the OSD Configuration Menu. (1) Main Menu T abs : The select ed tab is shown in blue and the related sub - menu s will be shown below the tab. To move to the previous/next Main Menu Tab, use the [  / ?[...]

  • Página 15

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 15 5.2. Dialogue Box to Edit a Word There are two methods to set word. (1) Using number button Enter the related numbers in order of horizontal/vertical . ( For example, in order to select “ C ” , press [ 3 ] and [ 2 ] button s.) (2) Using arrow button Select a value using t[...]

  • Página 16

    ELX8 - 60 INSTALLATION AND CONNECTION 16 2003. 08. 13 (v 1.0) Rugged CCTV (3) Function word The following symbols are for executing specific function s: ü 1#2.1 : Enter : Back Space & delete : Space  : Move to left  : Move to right : Previous Code Page : Next Code Page[...]

  • Página 17

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 17 6. Setting remote controller 6.1. Setting remote control DIP switch Set the remote control DIP switch to “ ON .” 6.2. Setting ID of ELX8 - 60 When controlling sever al ELX8 - 60 s with one remote controller, set Remote Control ID as follow s . (1) Press the [MENU] button.[...]

  • Página 18

    ELX8 - 60 INSTALLATION AND CONNECTION 18 2003. 08. 13 (v 1.0) Rugged CCTV (4) Select “ Remote Control ID ,” and press the [ENETR] button. (5) Select a value using the [  /  ] button s and press the [EXIT] button. (6) Press the [EXIT] button to exit the Settings Page and return to Monitor mode. <Note> Remote Control ID Up to 16[...]

  • Página 19

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 19 6.5. Loading the batteries into remote controller Remote controller requires two AAA - type batteries. 1. Remove the battery cover. 2. Taking care that the poles(+/ - ) are correctly positioned 3. Replace the battery cover. <Note> B atteries are not included as a packin[...]

  • Página 20

    ELX8 - 60 INSTALLATION AND CONNECTION 20 2003. 08. 13 (v 1.0) Rugged CCTV 7. ELX8 - 60 Configuration 7.1. Basic Configuration 7.2. Advanced Configuration[...]

  • Página 21

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 21 7.3. External Storage & Backup Configuration 7.4. Internet/Intranet Configuration[...]

  • Página 22

    ELX8 - 60 INSTALLATION AND CONNECTION 22 2003. 08. 13 (v 1.0) Rugged CCTV 8. ELX8 - 60 Basic Setti ng 8.1. Viewing Image After initial start - up, images from Ch.1~4 are disp l ayed in a quad - split screen. <Note> If user password is set, a prompt for entering the password will appear .[...]

  • Página 23

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 23 8.2. Setting Date & Time (1) Press [MENU] button, and select “ Quick Setup ” tab . (2) Select “ Date/Time ” and enter the Settings Page by pressing [ENTER]. 8.2.1. Time Zone (1) Select “ Time Zone ” and press [ENETR] button to configure . (2) Select a value us[...]

  • Página 24

    ELX8 - 60 INSTALLATION AND CONNECT ION 24 2003. 08. 13 (v 1.0) Rugged CCTV 8.2.4. Time Format (1) Select “ Time Format ” using the [  /  ] or the [  /  ] button s and press [EN TE R]. (2) Two Time Format s are available ; ‘ MM/DD/YYYY ’ and ‘ YYYY/MM/DD ’ . Select a value using [  /  ] butto n s , and press the [[...]

  • Página 25

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 25 (1) Press [MENU] button, and select “ Quick Setup .” (2) Move to sub - menu by pres sing [ENTER] or the [  ] button. (3) Select “ Recording ” using the [  /  ] button s and press the [ENTER] button. 8.3.1. Configuration Status Displays the recording configura[...]

  • Página 26

    ELX8 - 60 INSTALLATION AND CONNECTION 26 2003. 08. 13 (v 1.0) Rugged CCTV 8.3.3. Recording Speed/Quality (1) Select “ Recording Speed/Quality ” using [  /  ] button s and press the [ENTER] button. (2) Select a value using th e [  /  ] button . P ress the [EXIT] button when finished . <Note> Recording Speed/Quality means [...]

  • Página 27

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 27 9. Connecting and Configuring Sensor 9.1. Connecting Sensor Input To connect a sensor to S1 , fix the wire to “ S1 ” and “ G “ . <Note> Devices connected to the sensor input should have “ Dry contact .” The following diagram is of an e lectric circuit with a[...]

  • Página 28

    ELX8 - 60 INSTALLATION AND CONNECTION 28 2003. 08. 13 (v 1.0) Rugged CCTV 9.2. Setting Sensor at OSD menu (1) After a sensor is connect ed, it can be activate d through the OSD Configuration menu. (2) Select the sensor number (S1, S2, etc.) and p ress the [Enter] button to configure. Use the [  /  ] buttons to select “On” or “Off.[...]

  • Página 29

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 29 10. Connecting & Configuring Relay Out 10.1. Connecting Relay Out ELX8 - 60 has total four ports of Relay Out. To connect a device to “ O1 ,” connect the wires to two “ O1 ” s. <Note> The rated voltage and current of Relay Out are as follows. Do no t exceed [...]

  • Página 30

    ELX8 - 60 INSTALLATION AND CONNECTION 30 2003. 08. 13 (v 1.0) Rugged CCTV 10.2. Configuring Relay Out Each r elay can be synchronized with a sensor input or with motion detection for each of the four time schedul es (Weekday (Day), Weekday (Night), Weekend (Day), Weekend (Night)). Relays can also be controlled locally by pressing the [SEARCH/RELAY][...]

  • Página 31

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 31 11. Connecting External Device with Serial Port 11.1. Connecting Text Input Device (ATM / POS / Access Control) In addition to images, the ELX8 - 60 can record text data received from POS/ATM through the RS232 serial port. Connect RS232 to 9pin D - sub of ELX8 - 6 0 , and con[...]

  • Página 32

    ELX8 - 60 INSTALLATION AND CONNECTION 32 2003. 08. 13 (v 1.0) Rugged CCTV 12. Connecting & Configuring Serial Ports for Pan/Tilt/Zoom 12.1. Connecting Serial Port The ELX8 - 60 has most major PTZ protocols a l re ady pre - programmed . Makes and models not supported can still be controlled using the Transparent Protocol. For a list of supported[...]

  • Página 33

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 33 12.2. Configuring Serial Port Configure PTZ serial ports and available modes at “ System / Serial Setup ” . After completing serial setup, configure base address and port for each channel under the “ Camera ” menu tab . When connecting PTZ devices to several cameras, [...]

  • Página 34

    ELX8 - 60 INSTALLATION AND CONNECTION 34 2003. 08. 13 (v 1.0) Rugged CCTV <Note> Wire Handling Trimming Wire When connect ing a wire to a terminal block, follow the instructions below . Note the different types of wire that can be used. St r anded Wire : Peel o ff the wiring cover 8~10mm and solder it. Wire gage should be AWG 22 ~ 26. Solid W[...]

  • Página 35

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 35 If properly connected, the disk is recognized automatically as in the following picture. To c opy images, the process i s as follows: Set copy range ( up to 1 minute) à Select drive à Copy (press “Start”) . <Note> USB Flash product s that require a Windows program[...]

  • Página 36

    ELX8 - 60 INSTALLATION AND CONNECTION 36 2003. 08. 13 (v 1.0) Rugged CCTV 14. Connecting External Storage 14.1. IEEE1394 Port ELX8 - 60 has two IEEE1394 ports for external storage device interface. With them, ELX8 - 60 can expand storage capacity up to 4TB. <Note> Some IEEE1394 Bay may not be recognized by the ELX8 - 60 . Before purchasing, c[...]

  • Página 37

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 37 14.3. Availa ble HDD It is recommended to use the following HDD models with the ELX8 - 60 . If a non - recommended HDD is used , Rugged CCTV will not guarantee the warranty. Manufacturer : MAXTOR Series Model No Size Series Model No Size 6Y060L0 60GB 4R060L0 60GB 6Y080L (P) 0[...]

  • Página 38

    ELX8 - 60 INSTALLATION AND CONNECTION 38 2003. 08. 13 (v 1.0) Rugged CCTV (1) Press [ENTER] button at “ Select Disk ” . (2) Select new added HDD (indicated as “ [F] ” ) using [  /  ] button and press [EXIT] button (3) Select “ Action ” using [  /  ] button and press [EXIT] button. (4) Select “ Add ” using [  / ?[...]

  • Página 39

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 39 <Note> 1. Supply power to ELX8 - 60 a fter connecting Ethernet cable to protect against electrical damage to ELX8 - 60. 2. Check cable connection status. 3. Check LED on ELX8 - 60 ’ s rear panel after supplying power.[...]

  • Página 40

    ELX8 - 60 INSTALLATION AND CONNECTION 40 2003. 08. 13 (v 1.0) Rugged CCTV 15.2. Configuring ELX8 - 60 Network Information The following description is on based o n Ethernet connection . For more detailed information on the Network Settings Page , please refer to “ ELX8 - 60 OSD User ’ s Guide ” . (1) Press [MENU] button. (2) Select “ System[...]

  • Página 41

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 41 16. Using D VR Manager 16.1. PC System Requirements for running D VR Manager Minimal Requirements Recommended Requirements CPU P -  600MHz or above P -  1GHz or above RAM 128 MB or above 256 MB or above VGA 16 MB or abo ve 32 MB or above OS Windows 2000/XP Windows 2000/[...]

  • Página 42

    ELX8 - 60 INST ALLATION AND CONNECTION 42 2003. 08. 13 (v 1.0) Rugged CCTV (4) Select which component s to install and press the “ Next ” button. (5) Browse and choose a d irectory if the default directory is not preferred. Click the “ Install ” button, after selecting a directory to install . (6) Click the “ Close ” button after D VR M[...]

  • Página 43

    INSTALLATION AND CONNECTION ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 43 16.3. Uninstalling D VR Manager (1) Click Windows “ Start ” But ton. (2) Select and Click ‘ Uninstall ’ icon to run Uninstall Shield . (3) D VR Manager p rogram w ill be automatically deleted. 16.4. Configstation Click icon on desktop to run “ D VR Manager Configsta[...]

  • Página 44

    ELX8 - 60 INSTALLATION AND CONNECTION 44 2003. 08. 13 (v 1.0) Rugged CCTV 16.5. Monitor Cli ck the related icon and run the “ D VR Manager Monitor ” program. 16.6. Playback Click the related icon and run the “ D VR Manager Playback ” program.[...]

  • Página 45

    APPENDIX ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 45 APPENDIX APPENDIX[...]

  • Página 46

    ELX8 - 60 APPENDIX 46 2003. 08. 13 (v 1.0) Rugged CCTV #1. HDD #1.1. Fundamental Notions & Terms ELX8 - 60 Storing Constructure (1) It is possible to connect 2 sets of HDD internally (Internal, ATA Interface) and 63 sets of HDD externally (External, 2 ports of IEEE1394). (2) All of the connected HDDs is recognized as one virtual disk, and ELX8 [...]

  • Página 47

    APPENDIX ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 47 Backup (1) Backup is possible only through IEEE1394 port, and HDD for backup should be formatted as FAT32 type. (Its type is indicated as [F] in Disk Manager.) Disk Manager (1) When HDD is added or deleted physically, Disk Manager runs automatically after rebooting. If not, you can run “ Disk[...]

  • Página 48

    ELX8 - 60 APPENDIX 48 2003. 08. 13 (v 1.0) Rugged CCTV (3) HDD Managing Command Format Format as ELX8 - 60 ’ s file system. Not available to PC file system. Add Add HDD for recording. Need to format. Add Used Add a HDD that has been used and formatted. There is no need to reformat . It is possbl e only when HDD is added as Primary Disk. Remove Re[...]

  • Página 49

    APPENDIX ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 49 Installing & Expanding Internal HDD Adding or replacing HDD should follow below process. (1) Turn off the power of ELX8 - 60. (2) Check whether the dip switches are set as illustrated below (3) Remove the 6 screws as illustrated below and pull up the cover from the rear part to open. (4) Ta[...]

  • Página 50

    ELX8 - 60 APPENDIX 50 2003. 08. 13 (v 1.0) Rugged CCTV (5) Fix the HDD with provided screws. Connect power and data cables to HDD. Installing si ngle HDD Installing 2 HDDs Caution for HDD Management 1. Replacing ‘ SLAVE ’ HDD of internal 2 HDDs causes permanent data loss in the SLAVE HDD. 2. MASTER HDD has all the index of stored data including[...]

  • Página 51

    APPENDIX ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 51 (6) Connect HDD power cable to main PCB ASS ’ Y. Secure the HDD with screws. (7) Connect HDD cable ’ s connector to HDD as in the following picture. (8) Assemble the top cover.[...]

  • Página 52

    ELX8 - 60 APPENDIX 52 2003. 08. 13 (v 1.0) Rugged CCTV When installing one primary disk (1) When power is supplied to ELX8 - 60, “ Disk Manager ” runs automatically after rebooting. If not, run it manually in “ Menu à Utility à Disk Ma nager ” . (2) There is a HDD that is indicated as “ [F] IntA ” . Select it. (3) Press the “ Apply [...]

  • Página 53

    APPENDIX ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 53 Whe n installing one primary disk and auxiliary disk (1) When power is supplied to ELX8 - 60, “ Disk Manager ” runs automatically after rebooting. If not, run it manually in “ Menu à Utility à Disk Manager ” . (2) There is a HDD that is indicated as “ [F] IntA ” . (3) Sel ect a HD[...]

  • Página 54

    ELX8 - 60 APPENDIX 54 2003. 08. 13 (v 1.0) Rugged CCTV Expending External HDD (When using internal HDD as primary disk) ELX8 - 60 use IEEE1394 as external stora ge device interface, and has two ports of IEEE1394. ELX8 - 60 supports upto 4TB storage. <Note> 1. Some IEEE1394 ports may not be recognized by the ELX8 - 60 . Before purchasing, cons[...]

  • Página 55

    APPENDIX ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 55 When using Disk Farm The following description is when ELX8 - 60 has internal primary disk and 3 se ts of IEEE1394 HDD. (1) When external HDD farm is connected to IEEE1394 port, “ Disk Manager ” runs automatically. If not, run it manually in “ Menu à Utility à Disk Manager ” . (2) Sel[...]

  • Página 56

    ELX8 - 60 APPENDIX 56 2003. 08. 13 (v 1.0) Rugged CCTV When using RAID The following description is when ELX8 - 60 has internal primary disk and 1 set of IEEE1394 HDD. <Note RAID> Even though several HDDs are connected to RAID, ELX8 - 60 will recognize t hem as only one HDD. For connection and setup of RAID, please refer to the manual of rela[...]

  • Página 57

    APPENDIX ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 57 Installing & Expending External HDD (When using external HDD as primary disk) When using Disk Farm The following description is when ELX8 - 60 does n ’ t have internal primary disk and 4 sets of IEEE1394 HDD. (1) When external HDD farm is connected to IEEE1394 port, “ Disk Manager ” r[...]

  • Página 58

    ELX8 - 60 APPENDIX 58 2003. 08. 13 (v 1.0) Rugged CCTV is changed to [R]. (8) Select a third HDD of [*] Ext . Press the “ Apply ” button after selecting action as “ Format ” . Then [*] is changed to [R]. (9) Select a fourth H DD of [*] Ext . Press the “ Apply ” button after selecting action as “ Format ” . Then [*] is changed to [R][...]

  • Página 59

    APPENDIX ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 59 (6) Press the [EXIT] button to shut down “ Disk Manager ” .[...]

  • Página 60

    ELX8 - 60 APPENDIX 60 2003. 08. 13 (v 1.0) Rugged CCTV #1.3. Replacing HDD Checking HDD ELX8 - 60 file system (VFS2) sensors bad sector automatically, and the sensored bad sector is not used. The following means when HDD is broken or has some problem in connection. (1) When replaying is stopped or ELX8 - 60 is rebooted in specific playback range. ([...]

  • Página 61

    APPENDIX ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 61 #1.4. Keeping Data To keep the stored data, you should back up or reserve as HDD itself. Backup (1) Connect backup HDD to IEEE1394 port. (2) Go to playback mode with pressing the [Playback] button. (3) Press the [SELECT] button and then [MENU] button. (4) Run “ Backup Manager ” with selecti[...]

  • Página 62

    ELX8 - 60 APPENDIX 62 2003. 08. 13 (v 1.0) Rugged CCTV How to preserve as HDD itself To keep HDD itself, it is possible only when HDD is installed and used in ELX8 - 60 (including primary disk and RAID). And it is recommended to use external HDD instead of internal HDD. Namely, connect only one external HDD, and then keep it after data is full. <[...]

  • Página 63

    APPENDIX ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 63 #2. Using CD - ROM Components of CD - ROM disc Installation Guide : ELX8 - 60 Installation Guide User ’ s Guide : ELX8 - 60 User ’ s Guide D VR Manager : D VR Manager User ’ s Guide ( ELX8 - 60 Remote Management Program) Acrobat Reader : V ersion 5.1 Preparation To read manual of CD - ROM[...]

  • Página 64

    ELX8 - 60 APPENDIX 64 2003. 08. 13 (v 1.0) Rugged CCTV #3. Specification General CPU 32bit RISC Processor (200MIPS) Flash Memory 8MB Main Memory 64MB OS Embedded LINUX Video Channel 8 Analog Channel (NTSC or PAL) Storage Device Internal 3.5 ” IDE HDD 2EA ( default 1EA) External 2EA for IEEE1394 Interface Support Max. 4Tbytes Intelligent File Syst[...]

  • Página 65

    APPENDIX ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 65 Dis play Monitoring Max. 240/200ips (NTSC/PAL) Viewer 1ch, 4ch, 9ch, Auto Sequential Recording Performance Max. 60 ips for local channel : max 7.5 ips/channel Recording Resolution 720x243(NTSC), 720x288(PAL) Playback Performance Max. 60ips Playback Speed 1x, 2x, 4x, 8x, 16x (Forward & Rever[...]

  • Página 66

    ELX8 - 60 APPENDIX 66 2003. 08. 13 (v 1.0) Rugged CCTV PTZ Control Serial Port RS232(1), RS485(1)/ RS422(1) Control Method (Local) Front panel button & IR remote controlle r (control IP video channel as well) Control Method (Remote) On - the - screen PTZ control on PC Preset Mode 8 points preset per channel Group Mode 1 group per channel Others[...]

  • Página 67

    APPENDIX ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 67 Mechanical Dimension (W D H) 306 x 280 x 67(mm) Weight 3.5Kg (With one HDD)[...]

  • Página 68

    ELX8 - 60 APPENDIX 68 2003. 08. 13 (v 1.0) Rugged CCTV[...]

  • Página 69

    APPENDIX ELX8 - 60 Rugged CCTV 2003. 08. 13 (v 1.0) 69 Rugged CCTV 5327 Cedar Creek Dr. Kemp, Texas 75143 Tel : ( 866 ) 301 - 2288 Fax : ( 903 ) 498 - 8989 Technical Support: 1 - 866 - 301 - CCTV URL: www.rugged - cctv.com E - mail: sales@rugged - c ctv.com[...]