Interface 9840 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Interface 9840. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Interface 9840 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Interface 9840 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Interface 9840, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Interface 9840 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Interface 9840
- nombre de fabricante y año de fabricación del dispositivo Interface 9840
- condiciones de uso, configuración y mantenimiento del dispositivo Interface 9840
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Interface 9840 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Interface 9840 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Interface en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Interface 9840, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Interface 9840, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Interface 9840. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    Advanced Force Measurement Model 9840 Digital Process Monitor Interface, Inc. 7401 E. Butherus Dr. Scottsdale, Arizona 85260 USA Tel: (480) 948-5555, Fax: (480) 948-1924[...]

  • Página 2

    INTERFACE MODEL 9840 VER 6.0.2 CONTENTS CONTENTS ....................................................................................................................... ........................... 1 INTRODUCTION ................................................................................................................... ..................... [...]

  • Página 3

    INTERFACE MODEL 9840 VER 6.0.2 Communications Settings ........................................................................................................ ................. 25 Communications Format .......................................................................................................... ................ 25 RS232 RUN MODE COMMA[...]

  • Página 4

    INTERFACE MODEL 9840 VER 6.0.2 Option View Command (OV)....................................................................................................... ............. 45 Option Printer Baudrate Command (OP) ........................................................................................... ..... 45 Option Auto-Identify Command (OI)...[...]

  • Página 5

    INTERFACE MODEL 9840 VER 6.0.2 INTRODUCTION The Model 9840 is a CE compliant and versatile precision instrument intended for the digital readout of strain gage sensors such as load cells and torque cells. Optical encoders are also supported. Here is a quick listing of its features: • Full bi-polar 6 digit display ( ± 999,999) using two line, 20 [...]

  • Página 6

    INTERFACE MODEL 9840 VER 6.0.2 • Remote operation using standard RS232 ASCII command set. • Each unit is set up to interact with the InterView software that can save tests, export data to a spreadsheet, and much more. • Back panel digital inputs for tare, peak and valley reset, position reset, and print. Other functions available as custom pr[...]

  • Página 7

    INTERFACE MODEL 9840 VER 6.0.2 QUICK ST ART This section will help you get your Model 9840 set up and operating in just a couple of minutes. The back panel is shown below. You will need to make at least two connections here. First be sure that the power switch is off (the lower part of the rocker should be pressed in). Connect the AC power line and[...]

  • Página 8

    INTERFACE MODEL 9840 VER 6.0.2 # Message Meaning 1 Interface X.Y.Z This is the version number. 2 Serial # 12345 Option # 114236 This is the serial number. This is the option number. 3 Last ID A LD90437 Last ID B TQ12030 The serial number of the load cell on Ch A. The serial number of the torque cell on Ch B 4 Ch A Max 4.00Lb Ch B Max 4.00LbI Maximu[...]

  • Página 9

    INTERFACE MODEL 9840 VER 6.0.2 The rightmost button will change the units that are being used. Repeated presses of this button will cycle through the list of units avail able for the currently displayed item. For example, with Load A showing you would see Lb, kg, N, PSI, MPa, Klb, kN, t, mV/V, grams, and then back to Lb. With Torq A, you will see L[...]

  • Página 10

    INTERFACE MODEL 9840 VER 6.0.2 RUN MODE The Model 9840 has three modes of operati on, Run mode, Setup mode, and System Calibration mode. At power-on it will be in Run mode. The first line of the display show an item label (Load A), a value (0.0000), and a unit label (Lb). The second line of the display can show the status of the 4 contact closure l[...]

  • Página 11

    INTERFACE MODEL 9840 VER 6.0.2 The table below summarizes the options. Whether the user sees torque or load for each channel depends upon the cell type that was calibrated or selected for that channel. Load A/B Pounds, Kilograms, Newtons, PSI, MegaPascals, Kilo-Pounds, Kilo-Newtons, Metric Tons, mV/V, grams. Peak A/B (Load) Pounds, Kilograms, Newto[...]

  • Página 12

    INTERFACE MODEL 9840 VER 6.0.2 The load or torque is always reset to zero. A single channel unit will automatically set Load A or Torque A to zero. Reset Button The Reset button brings up a list of things that you might want to set to zero: If this is a 2-channel unit, the following menu will appear: > Reset Ch A + Ch B will reset the peak and v[...]

  • Página 13

    INTERFACE MODEL 9840 VER 6.0.2 Print Button If the Print option is purchased, the Print Button can be used to either print data or to freeze the display. If the Hold option is purchased, the functionality of the button is set using the System Setup options. Otherwise, the button can only control the ability to print data. In Run Mode, if the System[...]

  • Página 14

    INTERFACE MODEL 9840 VER 6.0.2 SETUP MODE SUMMAR Y The table below summarizes the setup mode menus. Detailed information about each individual item is presented in the following sections. Setup mode ╠══════ >User Data Entry ║ ╠════════ >>Base Area Ch A/B ║ ╚════════ >>Base Length [...]

  • Página 15

    INTERFACE MODEL 9840 VER 6.0.2 SETUP MODE Setup mode is used to change the setup of the Model 9840. To enter setup mode press the two end buttons at the same time ( “<“ and “>“ ). The row of four buttons will now function as indicated by the lower set of labels (Plus, Minus, Enter, and Escape). If the optional keylock is in the locked[...]

  • Página 16

    INTERFACE MODEL 9840 VER 6.0.2 Entering Numerical Dat a At times you will need to enter numerical data into the Model 9840. The method is consistent in all cases. A number is presented on the left side of the display with an underline cursor. • Left ( “ < “ ) moves the cursor left one position. If you are on the leftmost digit a new zero w[...]

  • Página 17

    INTERFACE MODEL 9840 VER 6.0.2 1. Source: -- This entry allows you to scroll through a list (using the left/right or plus/minus buttons) to select the source of the data that will drive the analog output. The standard list will include load or torque, peak, valley, gross, position, and velocity. Channel A+B is an option which, if chosen, will appea[...]

  • Página 18

    INTERFACE MODEL 9840 VER 6.0.2 2. Full = 4.0000 Lb Zero = 4.0000 Lb (Input) Mv/V (Output)Volt (Output) MA 4 0v 12mA 3 -2.5v 10mA 2 -5.0v 8mA 1 -7.5v 6mA 0 -10.0v 4mA -1 -10.0v 4mA -2 -10.0v 4mA -3 -10.0v 4mA -4 -10.0v 4mA 3. Full = 2.0000 Lb Zero = 0.0000 Lb (Input) Mv/V (Output) Volt (Output) MA 4 10.0v 20mA 3 10.0v 20mA 2 10.0v 20mA 1 5.00v 16mA [...]

  • Página 19

    INTERFACE MODEL 9840 VER 6.0.2 return to the setup mode main menu without changing the cell that is selected. The enter button will select the currently displayed cell and briefly display the rated load or torque, last calibration date, and excitation voltage. To add new cells to this list use the Calibration entry on the setup mode main menu descr[...]

  • Página 20

    INTERFACE MODEL 9840 VER 6.0.2 >>Cal Check Selecting this item will run a calibration check on the cell attached to Channel A or B. The Model 9840 will measure the shunt value of the cell and compare it to the shunt value that was recorded when the cell was last calibrated. The rated load or torque and last calibration date for the cell are d[...]

  • Página 21

    INTERFACE MODEL 9840 VER 6.0.2 set the torque. When the Model 9840 is reading the cell it will display the “Reading...” message for about 10 seconds. During this time it is important that the masses or torque are not disturbed since all the readings taken are averaged together to obtain the calibration data. The second mass/torque is then enter[...]

  • Página 22

    INTERFACE MODEL 9840 VER 6.0.2 7. Trip if source < / > Set -- Choosing source>set means that the limit will be activated when the source becomes larger than the set point. Choosing source<set means the limit will be activated when the source becomes less than the set point. 8. Latching on/off -- Selecting latching off means that the lim[...]

  • Página 23

    INTERFACE MODEL 9840 VER 6.0.2 >>Com Address This item allows you to set the address of this unit used for the RS232 ASCII command set. Valid values are 1 through 254. If the RS232 multi-drop option is installed you must be sure that all the attached units have different addresses to prevent data collisions. >>Com Baudrate This sets the[...]

  • Página 24

    INTERFACE MODEL 9840 VER 6.0.2 >>Decimals Ch A/B This lets you set the maximum number of digits to the right of the decimal that are displayed or printed for load or torque, peak, and valley. When large cells are selected the number of decimal digits shown may be limited, for example a 100 Lb cell will allow 3 digits, while a 1000 Lb cell wil[...]

  • Página 25

    INTERFACE MODEL 9840 VER 6.0.2 REMOTE OPERA TION Digit al Inputs There are 4 digital inputs available on the Model 9840. They are accessible on the Digital I/O connector on the back panel (pins 9 - 16). These inputs are individually opto-isolated and include current limiting resistors. An input voltage anywhere from +4 to +22 volts DC may be used t[...]

  • Página 26

    INTERFACE MODEL 9840 VER 6.0.2 Communications Settings The Model 9840 supports remote operation using a standard Remote interface consisting of ASCII characters and terminal emulation software package such as HyperTerminal or ProComm. The baud rate is set using the Com Baud rate item on the System Options menu. Supported rates are 300 , 600 , 1200 [...]

  • Página 27

    INTERFACE MODEL 9840 VER 6.0.2 RS232 RUN MODE COMMANDS The commands listed in this section mirror (and in some cases extend) the functions that are available from the front panel of the Model 9840 when it is in Run Mode. Each entry will include the name of the comm and, followed by a short description that includes the command format, an example th[...]

  • Página 28

    INTERFACE MODEL 9840 VER 6.0.2 These are the units for Velocity: 00 – I/M 01 – C/M Front Panel Display Command (F) This command is used to set the front panel display of the Model 9840 to a desired combination of item and unit. There are five subcommands: Front panel View (FV), Front panel Set (FS), Front panel Alternate(FA), Front panel pointe[...]

  • Página 29

    INTERFACE MODEL 9840 VER 6.0.2 @123F1 Acknowledge: @123 Active Display shows Load A in Lb Other Display shows Peak A in Lb Front Panel Pointer Control to Line 2 (F2) The Front Panel Pointer Control to Line 2 (F2) assigns the view pointer control to display line 2 (lower line of the display, or the virtual display line if line 2 is disabled) and sho[...]

  • Página 30

    INTERFACE MODEL 9840 VER 6.0.2 The repeat number is exactly like the one channel command. It must be 0, 1, or 2. Choosing repeat 1 will make the Model 9840 send you the desired value once. Choosing repeat 2 will make the Model 9840 send the value at approximately 3 second intervals. Choosing repeat 0 will turn off any values that are being sent by [...]

  • Página 31

    INTERFACE MODEL 9840 VER 6.0.2 @123R1000000 Acknowledge: @123 Reset – Tare A Example 2: @123R0111000 Acknowledge 2: @123 Reset – Peak A Valley A Tare B Freeze Display Command (X) In Run Mode, the freeze display command will freeze and unfreeze the run mode numerical display and the values sent from the unit for RS232 output using either the rem[...]

  • Página 32

    INTERFACE MODEL 9840 VER 6.0.2 RS232 SETUP MODE COMMAND SUMMAR Y @(addr) ╠═ U User Data Entry ║ ╠═ V View current settings ║ ╠═ A (channel)(number) # Set Base A rea ║ ╚═ L (number) # Set Base Length ║ ╠═ A A nalog Output ║ ╠═ V View current settings ║ ╚═ S (item)(unit)(full)#(zero)# Set analog output ║ ╠?[...]

  • Página 33

    INTERFACE MODEL 9840 VER 6.0.2 RS232 SETUP MODE COMMANDS The commands in this section allow you to change the setup of the Model 9840. You will notice that these commands form a menu wh ich approximately duplicates the Setup Mode menu used during setup of the Model 9840 from the front panel. There are additional commands that are for RS232 use only[...]

  • Página 34

    INTERFACE MODEL 9840 VER 6.0.2 Analog Output Command (A) This command is used to view or set the analog output of the Model 9840. There are two subcommands Analog View (AV) and Analog Set (AS). Analog Output V iew Command (A V) The Analog View (AV) command has the format AV. It will return the current settings of the analog output. Example: @123AV [...]

  • Página 35

    INTERFACE MODEL 9840 VER 6.0.2 Example: @123SA Acknowledge: @123 This is the list of cell calibration data: Ch A = S/N 123456, 100.00 Lb , 3.00150 mV/v, 10.00 V , Cal on Oct27-99, 49.532 Lb Shunt Sensor V iew Command (SV) The Sensor View (SV) command has the format SV. It returns information about the currently selected cell including the serial nu[...]

  • Página 36

    INTERFACE MODEL 9840 VER 6.0.2 Example: @123SD13368# Acknowledge: @123 Deleted Sensor S/N 13368 Ch A = S/N 123456, 100.00 Lb , 3.00150 mV/v, 10.00 V, 49.532 Lb Shunt unused S/N 63220, 100.00 Lb , 2.99984 mV/v, 10.00 V, 49.381 Lb Shunt Ch B = S/N 89991, 1000.0 Lb , 4.50015 mV/v, 5.00 V, 486.45 Lb Shunt Calibration Command (C) This command has 8 subc[...]

  • Página 37

    INTERFACE MODEL 9840 VER 6.0.2 command to stop this calibration. Another method of overwriting existing data is to delete the sensor first and then calibrate. The CB1 Command has been modified to accept the cell type but is still usable by older software. The format for the CB commands is: For backward compatibility: CB1(space)(channel)(serial numb[...]

  • Página 38

    INTERFACE MODEL 9840 VER 6.0.2 Calibration Escape Command (CE) The Calibrate Escape (CE) command is used to cancel a calibration that was started with the Calibrate Begin (CB) command. This format is CE. Example: @123CE Acknowledge: @123 Calibrate Command - Canceled, Calibration NOT Changed Calibrate by Millivolt-Per-V olt Command for One Point (CV[...]

  • Página 39

    INTERFACE MODEL 9840 VER 6.0.2 Calibration by mV/V Mass 1 (CMVM1) command. The mass is entered using the following format: CMVM1(mass value)#. Entering this command will result in the unit prompting the user for the first milli-volt per volt command. Example: @123CMVM15.0005# Acknowledge: @123 Calibrate Mass 1 Command entered Ready for mV/V Value C[...]

  • Página 40

    INTERFACE MODEL 9840 VER 6.0.2 Calibration by mV/V Torque 1 (CMVT1) command. The torque is entered using the following format: CMVT1(torque value)#. Entering this command will result in the unit prompting the user for the first milli-volt per volt command. Example: @123CMVT15.0005# Acknowledge: @123 Calibrate Torque 1 Command entered Ready for mV/V[...]

  • Página 41

    INTERFACE MODEL 9840 VER 6.0.2 Acknowledge: @123 Calibrate by Mass – 5 Point Ready for CMP1 command Calibrate by Masses Point Command (CM P) The Calibration by Masses Point (CMP) command can have up to six parts: CMP1 through CMP5 and CMP0. You must have already started a calibration using the CB and CM commands for any of these commands to funct[...]

  • Página 42

    INTERFACE MODEL 9840 VER 6.0.2 10.00 V , Cal on Oct27-99, 49.532 Lb Shunt unused S/N 13368, 10.00 Lb , 3.00121 mV/v, 10.00 V, Cal on Oct27-99, 4.9292 Lb Shunt unused S/N 63220, 100.00 Lb , 2.99984 mV/v, 10.00 V , Cal on Oct27-99, 49.381 Lb Shunt Ch B = S/N 89991, 1000.0 Lb , 4.50015 mV/v, 5.00 V , Cal on Oct27-99, 486.45 Lb Shunt Calibrate by T orq[...]

  • Página 43

    INTERFACE MODEL 9840 VER 6.0.2 from the cell before entering this command since it will perform the shunt calibration measurement that is recorded for use with the calibration check command. The format is CTP0. Example: @123CTP0 Acknowledge: @123 Calibrate Command - Reading for Shunt Check... [10 seconds delay] @123 Calibrate Command Completed Ch A[...]

  • Página 44

    INTERFACE MODEL 9840 VER 6.0.2 The Calibration counts per Inch View (CIV) command displays the current setting of the encoder counts per inch constant. Example: @123CIV Acknowledge: @123 Encoder is 32000 counts per inch The Calibration counts per Inch Set (CIS) command allows you to change the current setting of the encoder counts per inch constant[...]

  • Página 45

    INTERFACE MODEL 9840 VER 6.0.2 The limit number chooses which limit (1-4) you want to setup. The normal position should be set to 0 for normally open or 1 for normally closed. The enable should be set to 0 for disabled or 1 for enabled. If the limit is disabled the rest of this command may be omitted (see example 3). The item and unit numbers indic[...]

  • Página 46

    INTERFACE MODEL 9840 VER 6.0.2 @123LE Acknowledge: @123 Limit Setup Command Canceled Limit Reset Command (LiR) The Limit Reset (LiR) command is used to manually reset a latching limit that has been activated. The format is L(limit number)R. Example: @123L1R Acknowledge: @123 Reset Limit 1 System Options Command (O) The system Options command has 8 [...]

  • Página 47

    INTERFACE MODEL 9840 VER 6.0.2 Example: Option Printer Command Code Baudrate 4 4800 5 9600 6 19.2K 8 57.6K 9 230.4K @123OP9 Acknowledge: @123 Printer Baud Rate is 230.4K Option Auto-Identify Command (OI) The Option auto-Identify (OI) command is used to turn auto-identification of load cells on or off. The format is OI(0 or 1), where 0 turns auto-id[...]

  • Página 48

    INTERFACE MODEL 9840 VER 6.0.2 Option Com Baudrate Command (OB) Option Baudrate Command Code Baudrate 0 300 1 600 2 1200 3 2400 4 4800 5 9600 6 19.2K 7 Special The Option com Baudrate (OB) command is used to change the communications baudrate for this unit. The format is OB(code), where the baudrate codes are given in the table. Code 7 is a special[...]

  • Página 49

    INTERFACE MODEL 9840 VER 6.0.2 @123 RS232 EOT is on. Display Options Command (D) The Display options command has 5 subcommands used to set options that effect the front panel display of the Model 9840. Display V iew Command (DV) The Display View (DV) command is used to return the current values of all the display options. The format is DV. Example:[...]

  • Página 50

    INTERFACE MODEL 9840 VER 6.0.2 Display Count By Command (DC) The Display Count by (DC) command sets the smallest number that the display will count by for the Load or Torq, Peak, and Valley measurements. The format is DC(channel)(code) where the code is selected from the table at the right. Display Count by Command Code Count By 0 1 1 2 2 5 3 10 4 [...]

  • Página 51

    INTERFACE MODEL 9840 VER 6.0.2 Disabling the window sets this value to 0. The window, once enabled and set, will take effect immediately and will remain in effect until the window is disabled. Note that changing a cell type on a channel will automatically disable the filter window for that channel, reset the units to Lb or LbI, and set the window v[...]

  • Página 52

    INTERFACE MODEL 9840 VER 6.0.2 SYSTEM CALIBRA TION MODE The following procedure should be followed to calibrate the Model 9840 itself. This calibration requires the use of a precision millivolt per volt reference which will be attached on the load cell connector. The resulting scale factors are recorded in the non-volatile memory of the Model 9840.[...]

  • Página 53

    INTERFACE MODEL 9840 VER 6.0.2 APPENDIX A -- MODEL 9840 SPECIFICA TIONS Transducer Interface Excitation 5VDC or 10 VDC software/auto selectable Current Drive 180 mA at 5VDC or 10 VDC Push Button Shunt Yes Internal Shunt Resistor 1 standard, 2 optional. Rear panel selectable Calibration Method Shunt, mV/V, Known Load Push Button Tare 100% of range--[...]

  • Página 54

    INTERFACE MODEL 9840 VER 6.0.2 Digital I/O Digital Inputs Interface 4 optically isolated inputs Function remote tare, peak/valle y reset, position reset, print Digital Outputs Function 4 independent limits Quad-Limits Setup Front panel, la tching or non-latching set points normally open/closed, enable/disable Quad-Limits Output 4 isol ated solid st[...]

  • Página 55

    INTERFACE MODEL 9840 VER 6.0.2 Digital Display Display Characters 2 lines by 20 characters Display Update > 4/Sec Scaling Automatic or manual Maximum Display Count ± 999,999 Decimal Points. Selection 0 to 5 software selectable. Display Type Vacuum fluorescent Resolution 24 bit Software Filters 8, software selectable Electrical Characteristics P[...]

  • Página 56

    INTERFACE MODEL 9840 VER 6.0.2 APPENDIX B -- CABLES AND CONNECT ORS Load Cell Connectors Notes: DB9 Female Pin Signal 1 EXCITE - HI 2 SENSE - HI 1 3 CELL OUTPUT - HI 4 CELL OUTPUT - LO 5 SENSE - LO 1 6 EXCITE - LO 7 AUTO ID - A 8 AUTO ID - B 9 CHASSIS GND 1. If the sense lines are not used, SENSE - HI must be tied to EXCITE - HI and SENSE - LO must[...]

  • Página 57

    INTERFACE MODEL 9840 VER 6.0.2 Digit al I/O Connector Notes: High Density 26 Female Pin Signal 1 LIM 1 A 1 2 LIM 1 B 1 3 LIM 2 A 4 LIM 2 B 5 LIM 3 A 6 LIM 3 B 7 LIM 4 A 8 LIM 4 B 9 ISO IN 1 - HI 2 10 ISO IN 1 - LO 2 11 ISO IN 2 - HI 12 ISO IN 2 - LO 13 ISO IN 3 - HI 14 ISO IN 3 - LO 15 ISO IN 4 - HI 16 ISO IN 4 - LO 17 KEYLOCK 3 18 GND 19 ENCODER C[...]

  • Página 58

    INTERFACE MODEL 9840 VER 6.0.2 USB Connector Pin Name Description 1 VCC +5 VDC 2 D - Data – 3 D+ Data + 4 GND Ground MODEL 9840 PG 57 PUB. 2856-16[...]

  • Página 59

    INTERFACE MODEL 9840 VER 6.0.2 Precision Shunt Calibration Resistors This diagram shows the connection of the precision internal shunt resistors. The back panel switch (shown to the left of the two resistors) selects between 30 K Ω and 60 K Ω . The shunt check relay (shown to the right of the two resistors) connects the selected resistor between [...]